The x64 backend currently builds the `RealRegUniverse` in a way that
is generating somewhat suboptimal code. In many blocks, we see uses of
callee-save (non-volatile) registers (r12, r13, r14, rbx) first, even in
very short leaf functions where there are plenty of volatiles to use.
This is leading to unnecessary spills/reloads.
On one (local) test program, a medium-sized C benchmark compiled to Wasm
and run on Wasmtime, I am seeing a ~10% performance improvement with
this change; it will be less pronounced in programs with high register
pressure (there we are likely to use all registers regardless, so the
prologue/epilogue will save/restore all callee-saves), or in programs
with fewer calls, but this is a clear win for small functions and in
many cases removes prologue/epilogue clobber-saves altogether.
Separately, I think the RA's coalescing is tripping up a bit in some
cases; see e.g. the filetest touched by this commit that loads a value
into %rsi then moves to %rax and returns immediately. This is an
orthogonal issue, though, and should be addressed (if worthwhile) in
regalloc.rs.
The current code doesn't correctly handle the case where `ExtendOp::UXTW` has
as source, a constant-producing insn that produces a negative (32-bit) value.
Then the value is incorrectly sign-extended to 64 bits (in fact, this has
already been done by `ctx.get_constant(insn)`), whereas it needs to be zero
extended. The obvious fix, done here, is just to force bits 63:32 of the
extension to zero, hence zero-extending it.
This fixes a subtle corner case exposed during fuzzing. If we have a bit
of CLIF like:
```
v0 = load.i64 ...
v1 = iadd.i64 v0, ...
v2 = do_other_thing v1
v3 = load.i64 v1
```
and if this is lowered using a machine backend that can merge loads into
ALU ops, *and* that has an addressing mode that can look through add
ops, then the following can happen:
1. We lower the load at `v3`. This looks backward at the address
operand tree and finds that `v1` is `v0` plus other things; it has an
addressing mode that can add `v0`'s register and the other things
directly; so it calls `put_value_in_reg(v0)` and uses its register in
the amode. At this point, the add producing `v1` has no references,
so it will not (yet) be codegen'd.
2. We lower `do_other_thing`, which puts `v1` in a register and uses it.
the `iadd` now has a reference.
3. We reach the `iadd` and, because it has a reference, lower it. Our
machine has the ability to merge a load into an ALU operation.
Crucially, *we think the load at `v0` is mergeable* because it has
only one user, the add at `v1` (!). So we merge it.
4. We reach the `load` at `v0` and because it has been merged into the
`iadd`, we do not separately codegen it. The register that holds `v0`
is thus never written, and the use of this register by the final load
(Step 1) will see an undefined value.
The logic error here is that in the presence of pattern matching that
looks through pure ops, we can end up with multiple uses of a value that
originally had a single use (because we allow lookthrough of pure ops in
all cases). In other words, the multiple-use-ness of `v1` "passes
through" in some sense to `v0`. However, the load sinking logic is not
aware of this.
The fix, I think, is pretty simple: we disallow an effectful instruction
from sinking/merging if it already has some other use when we look back
at it.
If we disallowed lookthrough of *any* op that had multiple uses, even
pure ones, then we would avoid this scenario; but earlier experiments
showed that to have a non-negligible performance impact, so (given that
we've worked out the logic above) I think this complexity is worth it.
It turns out that Souper does not allow a constant to be assigned to a variable,
they may only be used as operands. The 2.0.0 version of the `souper-ir` crate
correctly reflects this. In the `cranelift_codegen::souper_harvest` module, we
need to modify our Souper IR harvester so that it delays converting `iconst` and
`bconst` into Souper IR until their values are used as operands. Finally, some
unit tests in the `peepmatic-souper` crate need some small updates as well.
* Update the C API with module linking support
This commit does everything necessary (ideally) to support the module
linking proposal in the C API. The changes here are:
* New `wasm_{module,instance}type_t` types and accessors
* New `wasm_{module,instance}_type` functions
* Conversions between `wasm_extern_t` and `wasm_{instance,module}_t`, as
well as `wasm_externtype_t` and the new types.
* Addition of `WASM_EXTERN_{MODULE,INSTANCE}` constants
* New `wasm_config_t` modifier to enable/disable module linking
With these functions it should be possible to pass instances/modules to
instances and also acquire them from exports. Altogether this should
enable everything for module linking.
An important point for this is that I've opted to add all these items
under the `wasm_*` name prefix instead of `wasmtime_*`. I've done this
since they're all following the idioms of existing APIs and while not
standard the intention would be to standardize them (unlike many other
Wasmtime-specific APIs).
cc #2094
* Appease doxygen
* Fix module-linking handling of instance subtypes
When we alias the nth export of an instance, due to subtyping the nth
export may not actually be what we want. Instead we need to look at our
local type definition's nth export's name, and lookup that name off the
export.
* Update crates/wasmtime/src/instance.rs
Co-authored-by: Peter Huene <peter@huene.dev>
Co-authored-by: Peter Huene <peter@huene.dev>
We are seeing some repeated but nondeterministic failures of x64 SIMD
tests, as tracked in #2470. In order to err on the side of not
inadvertently breaking/blocking CI for others, we will disable all SIMD
tests for now while we investigate.
* Implement imported/exported modules/instances
This commit implements the final piece of the module linking proposal
which is to flesh out the support for importing/exporting instances and
modules. This ended up having a few changes:
* Two more `PrimaryMap` instances are now stored in an `Instance`. The value
for instances is `InstanceHandle` (pretty easy) and for modules it's
`Box<dyn Any>` (less easy).
* The custom host state for `InstanceHandle` for `wasmtime` is now
`Arc<TypeTables` to be able to fully reconstruct an instance's types
just from its instance.
* Type matching for imports now has been updated to take
instances/modules into account.
One of the main downsides of this implementation is that type matching
of imports is duplicated between wasmparser and wasmtime, leading to
posssible bugs especially in the subtelties of module linking. I'm not
sure how best to unify these two pieces of validation, however, and it
may be more trouble than it's worth.
cc #2094
* Update wat/wast/wasmparser
* Review comments
* Fix a bug in publish script to vendor the right witx
Currently there's two witx binaries in our repository given the two wasi
spec submodules, so this updates the publication script to vendor the
right one.
This commit is intended to do almost everything necessary for processing
the alias section of module linking. Most of this is internal
refactoring, the highlights being:
* Type contents are now stored separately from a `wasmtime_env::Module`.
Given that modules can freely alias types and have them used all over
the place, it seemed best to have one canonical location to type
storage which everywhere else points to (with indices). A new
`TypeTables` structure is produced during compilation which is shared
amongst all member modules in a wasm blob.
* Instantiation is heavily refactored to account for module linking. The
main gotcha here is that imports are now listed as "initializers". We
have a sort of pseudo-bytecode-interpreter which interprets the
initialization of a module. This is more complicated than just
matching imports at this point because in the module linking proposal
the module, alias, import, and instance sections may all be
interleaved. This means that imports aren't guaranteed to show up at
the beginning of the address space for modules/instances.
Otherwise most of the changes here largely fell out from these two
design points. Aliases are recorded as initializers in this scheme.
Copying around type information and/or just knowing type information
during compilation is also pretty easy since everything is just a
pointer into a `TypeTables` and we don't have to actually copy any types
themselves. Lots of various refactorings were necessary to accomodate
these changes.
Tests are hoped to cover a breadth of functionality here, but not
necessarily a depth. There's still one more piece of the module linking
proposal missing which is exporting instances/modules, which will come
in a future PR.
It's also worth nothing that there's one large TODO which isn't
implemented in this change that I plan on opening an issue for.
With module linking when a set of modules comes back from compilation
each modules has all the trampolines for the entire set of modules. This
is quite a lot of duplicate trampolines across module-linking modules.
We'll want to refactor this at some point to instead have only one set
of trampolines per set of module linking modules and have them shared
from there. I figured it was best to separate out this change, however,
since it's purely related to resource usage, and doesn't impact
non-module-linking modules at all.
cc #2094
This PR adds a new fuzz target, `differential_wasmi`, that runs a
Cranelift-based Wasm backend alongside a simple third-party Wasm
interpeter crate (`wasmi`). The fuzzing runs the first function in a
given module to completion on each side, and then diffs the return value
and linear memory contents.
This strategy should provide end-to-end coverage including both the Wasm
translation to CLIF (which has seen some subtle and scary bugs at
times), the lowering from CLIF to VCode, the register allocation, and
the final code emission.
This PR also adds a feature `experimental_x64` to the fuzzing crate (and
the chain of dependencies down to `cranelift-codegen`) so that we can
fuzz the new x86-64 backend as well as the current one.
Since downloading the wasi-nn artifacts take a bit of time, the example script's first argument serves as a directory to reuse for running this script. This change cleans up temporary directories only when a directory was not specified.
- Sort by generated-code offset to maintain invariant and avoid gimli
panic.
- Fix srcloc interaction with branch peephole optimization in
MachBuffer: if a srcloc range overlaps with a branch that is
truncated, remove that srcloc range.
These issues were found while fuzzing the new backend (#2453); I suspect
that they arise with the new backend because we can sink instructions
(e.g. loads or extends) in more interesting ways than before, but I'm
not entirely sure.
Test coverage will be via the fuzz corpus once #2453 lands.
A dynamic heap address computation may create up to two conditional
branches: the usual bounds-check, but also (in some cases) an
offset-addition overflow check.
The x64 backend had reversed the condition code for this check,
resulting in an always-trapping execution for a valid offset. I'm
somewhat surprised this has existed so long, but I suppose the
particular conditions (large offset, small offset guard, dynamic heap)
have been somewhat rare in our testing so far.
Found via fuzzing in #2453.
CentOS 6 just went EOL at the end of November 2020; as of today, the
repository seems to have disappeared, so our CI builds are failing. This
PR updates us to CentOS 7, which should be usable until June 30, 2024.
* Provide filename/line number information in `Trap`
This commit extends the `Trap` type and `Store` to retain DWARF debug
information found in a wasm file unconditionally, if it's present. This
then enables us to print filenames and line numbers which point back to
actual source code when a trap backtrace is printed. Additionally the
`FrameInfo` type has been souped up to return filename/line number
information as well.
The implementation here is pretty simplistic currently. The meat of all
the work happens in `gimli` and `addr2line`, and otherwise wasmtime is
just schlepping around bytes of dwarf debuginfo here and there!
The general goal here is to assist with debugging when using wasmtime
because filenames and line numbers are generally orders of magnitude
better even when you already have a stack trace. Another nicety here is
that backtraces will display inlined frames (learned through debug
information), improving the experience in release mode as well.
An example of this is that with this file:
```rust
fn main() {
panic!("hello");
}
```
we get this stack trace:
```
$ rustc foo.rs --target wasm32-wasi -g
$ cargo run foo.wasm
Finished dev [unoptimized + debuginfo] target(s) in 0.16s
Running `target/debug/wasmtime foo.wasm`
thread 'main' panicked at 'hello', foo.rs:2:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Error: failed to run main module `foo.wasm`
Caused by:
0: failed to invoke command default
1: wasm trap: unreachable
wasm backtrace:
0: 0x6c1c - panic_abort::__rust_start_panic::abort::h2d60298621b1ccbf
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:77:17
- __rust_start_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:32:5
1: 0x68c7 - rust_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:626:9
2: 0x65a1 - std::panicking::rust_panic_with_hook::h2345fb0909b53e12
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:596:5
3: 0x1436 - std::panicking::begin_panic::{{closure}}::h106f151a6db8c8fb
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:506:9
4: 0xda8 - std::sys_common::backtrace::__rust_end_short_backtrace::he55aa13f22782798
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:153:18
5: 0x1324 - std::panicking::begin_panic::h1727e7d1d719c76f
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:505:12
6: 0xfde - foo::main::h2db1313a64510850
at /Users/acrichton/code/wasmtime/foo.rs:2:5
7: 0x11d5 - core::ops::function::FnOnce::call_once::h20ee1cc04aeff1fc
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:227:5
8: 0xddf - std::sys_common::backtrace::__rust_begin_short_backtrace::h054493e41e27e69c
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:137:18
9: 0x1d5a - std::rt::lang_start::{{closure}}::hd83784448d3fcb42
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:66:18
10: 0x69d8 - core::ops::function::impls::<impl core::ops::function::FnOnce<A> for &F>::call_once::h564d3dad35014917
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:259:13
- std::panicking::try::do_call::hdca4832ace5a8603
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:381:40
- std::panicking::try::ha8624a1a6854b456
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:345:19
- std::panic::catch_unwind::h71421f57cf2bc688
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panic.rs:382:14
- std::rt::lang_start_internal::h260050c92cd470af
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:51:25
11: 0x1d0c - std::rt::lang_start::h0b4bcf3c5e498224
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:65:5
12: 0xffc - <unknown>!__original_main
13: 0x393 - __muloti4
at /cargo/registry/src/github.com-1ecc6299db9ec823/compiler_builtins-0.1.35/src/macros.rs:269
```
This is relatively noisy by default but there's filenames and line
numbers! Additionally frame 10 can be seen to have lots of frames
inlined into it. All information is always available to the embedder but
we could try to handle the `__rust_begin_short_backtrace` and
`__rust_end_short_backtrace` markers to trim the backtrace by default as
well.
The only gotcha here is that it looks like `__muloti4` is out of place.
That's because the libc that Rust ships with doesn't have dwarf
information, although I'm not sure why we land in that function for
symbolizing it...
* Add a configuration switch for debuginfo
* Control debuginfo by default with `WASM_BACKTRACE_DETAILS`
* Try cpp_demangle on demangling as well
* Rename to WASMTIME_BACKTRACE_DETAILS
This commit implements the interpretation necessary of the instance
section of the module linking proposal. Instantiating a module which
itself has nested instantiated instances will now instantiate the nested
instances properly. This isn't all that useful without the ability to
alias exports off the result, but we can at least observe the side
effects of instantiation through the `start` function.
cc #2094
Prior to this change, the interpreter would use an incorrect `FuncRef` for accessing functions from the function store. This is now clarified and fixed by a new type--`FuncIndex`.
Previously, getting or setting a value in a frame of the Cranelift interpreter involved a hash table lookup. Since the interpreter statically knows the number of slots necessary for each called frame, we can use a vector instead and save time on the hash lookup. This also has the advantage that we have a more stable ABI for switching between interpreted and code.
This commit deletes the old `snapshot_0` implementation of wasi-common,
along with the `wig` crate that was used to generate bindings for it.
This then reimplements `snapshot_0` in terms of
`wasi_snapshot_preview1`. There were very few changes between the two
snapshots:
* The `nlink` field of `FileStat` was increased from 32 to 64 bits.
* The `set` field of `whence` was reordered.
* Clock subscriptions in polling dropped their redundant userdata field.
This makes all of the syscalls relatively straightforward to simply
delegate to the next snapshot's implementation. Some trickery happens to
avoid extra cost when dealing with iovecs, but since the memory layout
of iovecs remained the same this should still work.
Now that `snapshot_0` is using wiggle we simply have a trait to
implement, and that's implemented for the same `WasiCtx` that has the
`wasi_snapshot_preview1` trait implemented for it as well. While this
theoretically means that you could share the file descriptor table
between the two snapshots that's not supported in the generated bindings
just yet. A separate `WasiCtx` will be created for each WASI module.
This makes the value of `state.reachable()` inaccurate when observing at
the tail of functions (in the post-function hook) after an ordinary
return instruction.
In some cases, it is useful to do some work at entry to or exit from a
Cranelift function translated from WebAssembly. This PR adds two
optional methods to the `FuncEnvironment` trait to do just this,
analogous to the pre/post-hooks on operators that already exist.
This PR also includes a drive-by compilation fix due to the latest
nightly wherein `.is_empty()` on a `Range` ambiguously refers to either
the `Range` impl or the `ExactSizeIterator` impl and can't resolve.
* Enhance wiggle to generate its UserErrorConverstion trait with a function that returns
a Result<abi_err, String>. This enhancement allows hostcall implementations using wiggle
to return an actionable error to the instance (the abi_err) or to terminate the instance
using the String as fatal error information.
* Enhance wiggle to generate its UserErrorConverstion trait with a function that returns
a Result<abi_err, String>. This enhancement allows hostcall implementations using wiggle
to return an actionable error to the instance (the abi_err) or to terminate the instance
using the String as fatal error information.
* Enhance the wiggle/wasmtime integration to leverage new work in ab7e9c6. Hostcall
implementations generated by wiggle now return an Result<abi_error, Trap>. As a
result, hostcalls experiencing fatal errors may trap, thereby terminating the
wasmtime instance. This enhancement has been performed for both wasi snapshot1
and wasi snapshot0.
* Update wasi-nn crate to reflect enhancement in issue #2418.
* Update wiggle test-helpers for wiggle enhancement made in issue #2418.
* Address PR feedback; omit verbose return statement.
* Address PR feedback; manually format within a proc macro.
* Address PR feedback; manually format proc macro.
* Restore return statements to wasi.rs.
* Restore return statements in funcs.rs.
* Address PR feedback; omit TODO and fix formatting.
* Ok-wrap error type in assert statement.
