Changes:
* Adds a new generic instruction, SELECTIF, that does value selection (a la
conditional move) similarly to existing SELECT, except that it is
controlled by condition code input and flags-register inputs.
* Adds a new Intel x86_64 variant, 'baseline', that supports SSE2 and
nothing else.
* Adds new Intel x86_64 instructions BSR and BSF.
* Implements generic CLZ, CTZ and POPCOUNT on x86_64 'baseline' targets
using the new BSR, BSF and SELECTIF instructions.
* Implements SELECTIF on x86_64 targets using conditional-moves.
* new test filetests/isa/intel/baseline_clz_ctz_popcount.cton
(for legalization)
* new test filetests/isa/intel/baseline_clz_ctz_popcount_encoding.cton
(for encoding)
* Allow lib/cretonne/meta/gen_legalizer.py to generate non-snake-caseified
Rust without rustc complaining.
Fixes#238.
* Switch RegClass to a bitmap implementation.
* Add special RegClass to remove r13 from 'ld' recipe.
* Use MASK_LEN constant instead of magic number.
* Enforce that RegClass slicing is only valid on contiguous classes.
* Use Optional[int] for RegClass optional bitmask parameter.
* Add comment explaining use of Intel ISA's GPR_NORIP register class.
Add an addend field to reloc_external, and use it to move the
responsibility for accounting for the difference between the end of an
instruction (where the PC is considered to be in PC-relative on intel)
and the beginning of the immediate field into the encoding code.
Specifically, this makes IntelGOTPCRel4 directly correspond to
R_X86_64_GOTPCREL, instead of also carrying an implicit `- 4`.
* Use imm64 rather than offset32
* Add predicate to enforce signed 32-bit limit to imm
* Remove AdjustSpImm format
* Add encoding tests for adjust_sp_imm
* Adjust use of adjust_sp_imm in Intel prologue_epilogue to match
On some ISAs like Intel's, all arithmetic instructions set all or some
of the CPU flags, so flag values can't be live across these
instructions. On ISAs like ARM's Aarch32, flags are clobbered by compact
16-bit encodings but not necessarily by 32-bit encodings of the same
instruction.
The "clobbers_flags" bit on the encoding recipe is used to indicate if
CPU flag values can be live across an instruction, or conversely whether
the encoding can be used where flag values are live.
The register allocator can't handle branches with constrained register
operands, and the brz.b1/brnz.b1 instructions only have the t8jccd_abcd
in 32-bit mode where no REX prefixes are possible.
This adds a worst case encoding for those cases where a b1 value lives
in a non-ABCD register.
Most recipes with an ABCD constraint can handle the full GPR register
class when a REX prefix is applied, but not all. The "icscc" macro
recipe always generates a setCC instruction with no REX prefix, so it
can only write the ABCD registers, even in its REX form.
Don't automatically rewrite ABCD constraints to GPR constraints when
applying a REX prefix to a tail recipe. Instead, allow individual ABCD
recipes to specify a "when_prefixed" alternative recipe to use. This
also eliminates the spurious Rex*abcd recipe names which didn't have an
ABCD constraint.
Also allow recipes to specify that a REX prefix is required by setting
the prefix_required flag. This is used by recipes like t8jccb which
explicitly accesses an 8-bit register with a GPR constraint which is
only valid with a prefix.
Some REX-less encodings require an ABCD input because they are looking
at 8-bit registers. This constraint doesn't apply with a REX prefix
where the low 8 bits of all registers are addressable.
The brz and brnz instructions get support for 32-bit jump displacements
for long range branches.
Also change the way branch ranges are specified on tail recipes for the
Intel instructions. All branch displacements are relative to the end of
the instruction, so just compute the branch range origin as the
instruction size instead of trying to specify it in the tail recipe
definitions.
This is used to represent the non-trapping semantics of the cvttss2si and
cvttsd2si instructions (and their vectorized counterparts).
The overflow behavior of this instruction is specific to the Intel ISAs.
There is no float-to-i64 instruction on the 32-bit Intel ISA.
Not all floating point condition codes are directly supported by the
ucimiss/ucomisd instructions. Some inequalities need to be reversed and
eq+ne require two separate tests.
To begin with, these are catch-all encodings with a SIB byte and a
32-bit displacement, so they can access any stack slot via both the
stack pointer and the frame pointer.
In the future, we will add encodings for 8-bit displacements as well as
EBP-relative references without a SIB byte.
Use these encodings to test trapz.b1 and trapnz.b1.
When a b1 value is stored in a register, only the low 8 bits are valid.
This is so we can use the various setCC instructions to generate the b1
registers.
The following instructions have simple encodings:
- bitcast.f32.i32
- bitcast.i32.f32
- bitcast.f64.i64
- bitcast.i64.f64
- fpromote.f64.f32
- fdemote.f32.f64
Also add helper functions enc_flt() and enc_i32_i64 to
intel.encodings.py for generating the common set of encodings for an
instruction: I32, I64 w/REX, I64 w/o REX.
These map to single Intel instructions.
The i64 to float conversions are not tested yet. The encoding tables
can't yet differentiate instructions on a secondary type variable alone.
This instruction returns a `b1` value which is represented as the output
of a setCC instruction which is the low 8 bits of a GPR register. Use a
cmp+setCC macro recipe to encode this. That is not ideal, but we can't
represent CPU flags yet.
