The term "local variables" predated the SSA builder in the front-end
crate, which also provides a way to implement source-language local
variables. The name "explicit stack slot" makes it clear what this
construct is.
This is the floating point equivalent of trapif: Trap when a given
condition is in the floating-point flags.
Define Intel encodings comparable to the trapif encodings.
This instruction loads a stack limit from a global variable and compares
it to the stack pointer, trapping if the stack has grown beyond the
limit.
Also add a expand_flags transform group containing legalization patterns
for ISAs with CPU flags.
Fixes#234.
Changes:
* Adds a new generic instruction, SELECTIF, that does value selection (a la
conditional move) similarly to existing SELECT, except that it is
controlled by condition code input and flags-register inputs.
* Adds a new Intel x86_64 variant, 'baseline', that supports SSE2 and
nothing else.
* Adds new Intel x86_64 instructions BSR and BSF.
* Implements generic CLZ, CTZ and POPCOUNT on x86_64 'baseline' targets
using the new BSR, BSF and SELECTIF instructions.
* Implements SELECTIF on x86_64 targets using conditional-moves.
* new test filetests/isa/intel/baseline_clz_ctz_popcount.cton
(for legalization)
* new test filetests/isa/intel/baseline_clz_ctz_popcount_encoding.cton
(for encoding)
* Allow lib/cretonne/meta/gen_legalizer.py to generate non-snake-caseified
Rust without rustc complaining.
Fixes#238.
Add a "cfg_postorder:" printout to the "test domtree" file tests and use
that to check the computed CFG post-order instead of doing it manually
with Rust code.
`stack_addr` and unrestricted loads and stores *can* be used with entirely
defined behavior. The sense in which they're not "safe" is only that it's
possible to misuse them. This subtlety wasn't captured in the definition
of "safe" here, so for now, just remove the definition so that it doesn't
cause confusion.
* Clarify undefined behavior and notrap.
Remove the "No undefined behavior" paragraph from the README. The other
paragraphs, specifically "Portable semantics" and
"Fast sandbox verification", describe Cretonne's goals in this area.
Define *addressable* and *accessible* memory, so that trapping remains a fully defined part of the semantics, and we have a clear boundary around undefined behavior, and use these terms to describe related constructs.
Add EBB parameter and EBB argument to the langref glossary to clarify
the distinction between formal EBB parameter values and arguments passed
to branches.
- Replace "ebb_arg" with "ebb_param" in function names that deal with
EBB parameters.
- Rename the ValueDef variants to Result and Param.
- A bunch of other small langref fixes.
No functional changes intended.
Add integer and floating comparison instructions that return CPU flags:
ifcmp, ifcmp_imm, and ffcmp.
Add conditional branch instructions that check CPU flags: brif, brff
Add instructions that check a condition in the CPU flags and return a
b1: trueif, trueff.
These two value types represent the state of CPU flags after an integer
comparison and a floating point comparison respectively.
Instructions using these types TBD.
The value types are now classified into three groups:
1. Lane types are scalar types that can also be used to form vectors.
2. Vector types 2-256 copies of a lane type.
3. Special types. This is where the CPU flag types will go.
The special types can't be used to form vectors.
Change the numbering scheme for value types to make room for the special
types and add `is_lane()` and `is_special()` classification methods.
The VOID type still has number 0, but it can no longer appear as a
vector lane. It classifies as special now.
The word "scalar" is a bit vague and tends to mean "non-vector". Since
we are about to add new CPU flag value types that can't appear as vector
lanes, make the distinction clear: LaneType represents value types that
can appear as a vector lane.
Also replace the Type::is_scalar() method with an is_vector() method.
These are parallels to the existing regmove instruction, but the divert
the value to and from a stack slot.
Like regmove diversions, this is a temporary diversion that must be
local to the EBB.
The expansion of a heap_addr instruction depends on the type of heap and
its configuration, so this is handled by custom code.
Add a couple examples of heap access code to the language reference
manual.
Add preamble syntax for declaring static and dynamic heaps, and update
the langref section on heaps. Add IR support for heap references.
Remove the heap_load and heap_store as discussed in #144. We will use
heap_addr along with native load and store instructions in their place.
Add the heap_addr instruction and document its bounds checking
semantics.
The code to compute the address of a global variable depends on the kind
of variable, so custom legalization is required.
- Add a legalizer::globalvar module which exposes an
expand_global_addr() function. This module is likely to grow as we add
more types of global variables.
- Add a ArgumentPurpose::VMContext enumerator. This is used to represent
special 'vmctx' arguments that are used as base pointers for vmctx
globals.
See #144 for discussion.
- Add a new GlobalVar entity type both in Python and Rust.
- Define a UnaryGlobalVar instruction format containing a GlobalVar
reference.
- Add a globalvar.rs module defining the GlobalVarData with support for
'vmctx' and 'deref' global variable kinds.
Langref:
Add a section about global variables and the global_addr
instruction.
Parser:
Add support for the UnaryGlobalVar instruction format as well as
global variable declarations in the preamble.
Also move the extending loads and truncating stores into the bulkier
"Operations" section to improve the flow of the "Memory" section in the
language reference.
A CallConv enum on every function signature makes it possible to
generate calls to functions with different calling conventions within
the same ISA / within a single function.
The calling conventions also serve as a way of customizing Cretonne's
behavior when embedded inside a VM. As an example, the SpiderWASM
calling convention is used to compile WebAssembly functions that run
inside the SpiderMonkey virtual machine.
All function signatures must have a calling convention at the end, so
this changes the textual IL syntax.
Before:
sig1 = signature(i32, f64) -> f64
After
sig1 = (i32, f64) -> f64 native
sig2 = (i32) spiderwasm
When printing functions, the signature goes after the return types:
function %r1() -> i32, f32 spiderwasm {
ebb1:
...
}
In the parser, this calling convention is optional and defaults to
"native". This is mostly to avoid updating all the existing test cases
under filetests/. When printing a function, the calling convention is
always included, including for "native" functions.
ARM has all of these as scalar integer instructions. Intel has band_not
in SSE and as a scalar in BMI1.
Add the trivial legalization patterns that use a bnot instruction.
Add instructions representing Intel's division instructions which use a
numerator that is twice as wide as the denominator and produce both the
quotient and remainder.
Add encodings for the x86_[su]divmodx instructions.
* Clarify that extended basic blocks are abbreviated as EBB.
* Fix typo.
* Fix a typo.
* Fix typos.
* Use the same phrase to indicate scalar-only as other places in the doc.
* Mention that `band_imm` and friends are scalar-only.
And mention that they're equivalent to their respective
non-immediate-form counterparts.
Add a StackSlotKind enumeration to help keep track of the different
kinds of stack slots supported:
- Incoming and outgoing function arguments on the stack.
- Spill slots and locals.
Change the text format syntax for declaring a stack slot to use a kind
keyword rather than just 'stack_slot'.
* Function names should start with %
* Create FunctionName from string
* Implement displaying of FunctionName as %nnnn with fallback to #xxxx
* Run rustfmt and fix FunctionName::with_string in parser
* Implement FunctionName::new as a generic function
* Binary function names should start with #
* Implement NameRepr for function name
* Fix examples in docs to reflect that function names start with %
* Rebase and fix filecheck tests
