This commit migrates these existing instructions to ISLE from the manual
lowerings implemented today. This was mostly straightforward but while I
was at it I fixed what appeared to be broken translations for I{8,16}
for `clz`, `cls`, and `ctz`. Previously the lowerings would produce
results as-if the input was 32-bits, but now I believe they all
correctly account for the bit-width.
This commit translates the `rotl` and `rotr` lowerings already existing
to ISLE. The port was relatively straightforward with the biggest
changing being the instructions generated around i128 rotl/rotr
primarily due to register changes.
* aarch64: Migrate ishl/ushr/sshr to ISLE
This commit migrates the `ishl`, `ushr`, and `sshr` instructions to
ISLE. These involve special cases for almost all types of integers
(including vectors) and helper functions for the i128 lowerings since
the i128 lowerings look to be used for other instructions as well. This
doesn't delete the i128 lowerings in the Rust code just yet because
they're still used by Rust lowerings, but they should be deletable in
due time once those lowerings are translated to ISLE.
* Use more descriptive names for i128 lowerings
* Use a with_flags-lookalike for csel
* Use existing `with_flags_*`
* Coment backwards order
* Update generated code
* aarch64: Migrate some bit-ops to ISLE
This commit migrates these instructions to ISLE:
* `bnot`
* `band`
* `bor`
* `bxor`
* `band_not`
* `bor_not`
* `bxor_not`
The translations were relatively straightforward but the interesting
part here was trying to reduce the duplication between all these
instructions. I opted for a route that's similar to what the lowering
does today, having a `decl` which takes the `ALUOp` and then performs
further pattern matching internally. This enabled each instruction's
lowering to be pretty simple while we still get to handle all the fancy
cases of shifts, constants, etc, for each instruction.
* Actually delete previous lowerings
* Remove dead code
This commit migrates the sign/zero extension instructions from
`lower_inst.rs` to ISLE. There's actually a fair amount going on in this
migration since a few other pieces needed touching up along the way as
well:
* First is the actual migration of `uextend` and `sextend`. These
instructions are relatively simple but end up having a number of special
cases. I've attempted to replicate all the cases here but
double-checks would be good.
* This commit actually fixes a few issues where if the result of a vector
extraction is sign/zero-extended into i128 that actually results in
panics in the current backend.
* This commit adds exhaustive testing for
extension-of-a-vector-extraction is a noop wrt extraction.
* A bugfix around ISLE glue was required to get this commit working,
notably the case where the `RegMapper` implementation was trying to
map an input to an output (meaning ISLE was passing through an input
unmodified to the output) wasn't working. This requires a `mov`
instruction to be generated and this commit updates the glue to do
this. At the same time this commit updates the ISLE glue to share more
infrastructure between x64 and aarch64 so both backends get this fix
instead of just aarch64.
Overall I think that the translation to ISLE was a net benefit for these
instructions. It's relatively obvious what all the cases are now unlike
before where it took a few reads of the code and some boolean switches
to figure out which path was taken for each flavor of input. I think
there's still possible improvements here where, for example, the
`put_in_reg_{s,z}ext64` helper doesn't use this logic so technically
those helpers could also pattern match the "well atomic loads and vector
extractions automatically do this for us" but that's a possible future
improvement for later (and shouldn't be too too hard with some ISLE
refactoring).
This commit migrates the `imul` clif instruction lowering for AArch64 to
ISLE. This is a relatively complicated instruction with lots of special
cases due to the simd proposal for wasm. Like x64, however, the special
casing lends itself to ISLE quite well and the lowerings here in theory
are pretty straightforward.
The main gotcha of this commit is that this encounters a unique
situation which hasn't been encountered yet with other lowerings, namely
the `Umlal32` instruction used in the implementation of `i64x2.mul` is
unique in the `VecRRRLongOp` class of instructions in that it both reads
and writes the destination register (`use_mod` instead of simply
`use_def`). This meant that I needed to add another helper in ISLe for
creating a `vec_rrrr_long` instruction (despite this enum variant not
actually existing) which implicitly moves the first operand into the
destination before issuing the actual `VecRRRLong` instruction.
This commit is the first "meaty" instruction added to ISLE for the
AArch64 backend. I chose to pick the first two in the current lowering's
`match` statement, `isub` and `iadd`. These two turned out to be
particularly interesting for a few reasons:
* Both had clearly migratable-to-ISLE behavior along the lines of
special-casing per type. For example 128-bit and vector arithmetic
were both easily translateable.
* The `iadd` instruction has special cases for fusing with a
multiplication to generate `madd` which is expressed pretty easily in
ISLE.
* Otherwise both instructions had a number of forms where they attempted
to interpret the RHS as various forms of constants, extends, or
shifts. There's a bit of a design space of how best to represent this
in ISLE and what I settled on was to have a special case for each form
of instruction, and the special cases are somewhat duplicated between
`iadd` and `isub`. There's custom "extractors" for the special cases
and instructions that support these special cases will have an
`rule`-per-case.
Overall I think the ISLE transitioned pretty well. I don't think that
the aarch64 backend is going to follow the x64 backend super closely,
though. For example the x64 backend is having a helper-per-instruction
at the moment but with AArch64 it seems to make more sense to only have
a helper-per-enum-variant-of-`MInst`. This is because the same
instruction (e.g. `ALUOp::Sub32`) can be expressed with multiple
different forms depending on the payload.
It's worth noting that the ISLE looks like it's a good deal larger than
the code actually being removed from lowering as part of this commit. I
think this is deceptive though because a lot of the logic in
`put_input_in_rse_imm12_maybe_negated` and `alu_inst_imm12` is being
inlined into the ISLE definitions for each instruction instead of having
it all packed into the helper functions. Some of the "boilerplate" here
is the addition of various ISLE utilities as well.
* aarch64: Initial work to transition backend to ISLE
This commit is what is hoped to be the initial commit towards migrating
the aarch64 backend to ISLE. There's seemingly a lot of changes here but
it's intended to largely be code motion. The current thinking is to
closely follow the x64 backend for how all this is handled and
organized.
Major changes in this PR are:
* The `Inst` enum is now defined in ISLE. This avoids having to define
it in two places (once in Rust and once in ISLE). I've preserved all
the comments in the ISLE and otherwise this isn't actually a
functional change from the Rust perspective, it's still the same enum
according to Rust.
* Lots of little enums and things were moved to ISLE as well. As with
`Inst` their definitions didn't change, only where they're defined.
This will give future ISLE PRs access to all these operations.
* Initial code for lowering `iconst`, `null`, and `bconst` are
implemented. Ironically none of this is actually used right now
because constant lowering is handled in `put_input_in_regs` which
specially handles constants. Nonetheless I wanted to get at least
something simple working which shows off how to special case various
things that are specific to AArch64. In a future PR I plan to hook up
const-lowering in ISLE to this path so even though
`iconst`-the-clif-instruction is never lowered this should use the
const lowering defined in ISLE rather than elsewhere in the backend
(eventually leading to the deletion of the non-ISLE lowering).
* The `IsleContext` skeleton is created and set up for future additions.
* Some code for ISLE that's shared across all backends now lives in
`isle_prelude_methods!()` and is deduplicated between the AArch64
backend and the x64 backend.
* Register mapping is tweaked to do the same thing for AArch64 that it
does for x64. Namely mapping virtual registers is supported instead of
just virtual to machine registers.
My main goal with this PR was to get AArch64 into a place where new
instructions can be added with relative ease. Additionally I'm hoping to
figure out as part of this change how much to share for ISLE between
AArch64 and x64 (and other backends).
* Don't use priorities with rules
* Update .gitattributes with concise syntax
* Deduplicate some type definitions
* Rebuild ISLE
* Move isa::isle to machinst::isle
This also paves the way for unifying TargetIsa and MachBackend, since now they map one to one. In theory the two traits could be merged, which would be nice to limit the number of total concepts. Also they have quite different responsibilities, so it might be fine to keep them separate.
Interestingly, this PR started as removing RegInfo from the TargetIsa trait since the adapter returned a dummy value there. From the fallout, noticed that all Display implementations didn't needed an ISA anymore (since these were only used to render ISA specific registers). Also the whole family of RegInfo / ValueLoc / RegUnit was exclusively used for the old backend, and these could be removed. Notably, some IR instructions needed to be removed, because they were using RegUnit too: this was the oddball of regfill / regmove / regspill / copy_special, which were IR instructions inserted by the old regalloc. Fare thee well!
There were cases where the AArch64 backend assumed that an IR
operation would always operate on certain types (the most likely
reason being that the corresponding WebAssembly instruction did
not cover anything else), even though the definition of the IR
operation imposed no constraints like that.
Copyright (c) 2021, Arm Limited.
The tests for the SIMD floating-point maximum and minimum operations
require particular care because the handling of the NaN values is
non-deterministic and may vary between platforms. There is no way to
match several NaN values in a test, so the solution is to extract the
non-deterministic test cases into a separate file that is subsequently
replicated for every backend under test, with adjustments made to the
expected results.
Copyright (c) 2021, Arm Limited.
Cranelift crates have historically been much more verbose with debug-level
logging than most other crates in the Rust ecosystem. We log things like how
many parameters a basic block has, the color of virtual registers during
regalloc, etc. Even for Cranelift hackers, these things are largely only useful
when hacking specifically on Cranelift and looking at a particular test case,
not even when using some Cranelift embedding (such as Wasmtime).
Most of the time, when people want logging for their Rust programs, they do
something like:
RUST_LOG=debug cargo run
This means that they get all that mostly not useful debug logging out of
Cranelift. So they might want to disable logging for Cranelift, or change it to
a higher log level:
RUST_LOG=debug,cranelift=info cargo run
The problem is that this is already more annoying to type that `RUST_LOG=debug`,
and that Cranelift isn't one single crate, so you actually have to play
whack-a-mole with naming all the Cranelift crates off the top of your head,
something more like this:
RUST_LOG=debug,cranelift=info,cranelift_codegen=info,cranelift_wasm=info,...
Therefore, we're changing most of the `debug!` logs into `trace!` logs: anything
that is very Cranelift-internal, unlikely to be useful/meaningful to the
"average" Cranelift embedder, or prints a message for each instruction visited
during a pass. On the other hand, things that just report a one line statistic
for a whole pass, for example, are left as `debug!`. The more verbose the log
messages are, the higher the bar they must clear to be `debug!` rather than
`trace!`.
This commit addresses two issues:
* A panic when shifting any non i128 type by i128 amounts (#3064)
* Wrong results when lowering shifts with small types (i8, i16)
In these types when shifting for amounts larger than the size of the
type, we would not get the wrapping behaviour that we see on i32 and i64.
This is because in these larger types, the wrapping behaviour is automatically
implemented by using the appropriate instruction, however we do not
have i8 and i16 specific instructions, so we have to manually wrap
the shift amount with an AND instruction.
This issue is also found on x86_64 and s390x, and a separate issue will
be filed for those.
Closes#3064
When encoding constants as immediates into an RSE Imm12 instruction we need to take special care to check if the value that we are trying to input does not overflow its type when viewed as a signed value. (i.e. iconst.i8 200)
We cannot both put an immediate and sign extend it, so we need to lower it into a separate reg, and emit the sign extend into the instruction.
For more details see the [cg_clif bug report](https://github.com/bjorn3/rustc_codegen_cranelift/issues/1184#issuecomment-873214796).
Lowering icmp was duplicated across callers that only cared about
flags, and callers that only cared about the bool result.
Merge both callers into `lower_icmp` which does the correct thing
depending on a new IcmpOutput parameter.
The previous address calculation code had a bug where we tried to
add offsets into a temporary register before defining it, causing
the regalloc to complain.
When dealing with params that need to be split, we follow the
arch64 ABI and split the value in two, and make sure that start that
argument in an even numbered xN register.
The apple ABI does not require this, so on those platforms, we start
params anywhere.
This commit enables Cranelift's AArch64 backend to generate code
for instruction set extensions (previously only the base Armv8-A
architecture was supported); also, it makes it possible to detect
the extensions supported by the host when JIT compiling. The new
functionality is applied to the IR instruction `AtomicCas`.
Copyright (c) 2021, Arm Limited.
The StructReturn ABI is fairly simple at the codegen/isel level: we only
need to take care to return the sret pointer as one of the return values
if that wasn't specified in the initial function signature.
Struct arguments are a little more complex. A struct argument is stored
as a chunk of memory in the stack-args space. However, the CLIF
semantics are slightly special: on the caller side, the parameter passed
in is a pointer to an arbitrary memory block, and we must memcpy this
data to the on-stack struct-argument; and on the callee side, we provide
a pointer to the passed-in struct-argument as the CLIF block param
value.
This is necessary to support various ABIs other than Wasm, such as that
of Rust (with the cg_clif codegen backend).
This will allow for support for `I128` values everywhere, and `I64`
values on 32-bit targets (e.g., ARM32 and x86-32). It does not alter the
machine backends to build such support; it just adds the framework for
the MachInst backends to *reason* about a `Value` residing in more than
one register.
The current code doesn't correctly handle the case where `ExtendOp::UXTW` has
as source, a constant-producing insn that produces a negative (32-bit) value.
Then the value is incorrectly sign-extended to 64 bits (in fact, this has
already been done by `ctx.get_constant(insn)`), whereas it needs to be zero
extended. The obvious fix, done here, is just to force bits 63:32 of the
extension to zero, hence zero-extending it.
This PR updates the "coloring" scheme that accounts for side-effects in
the MachInst lowering logic. As a result, the new backends will now be
able to merge effectful operations (such as memory loads) *into* other
operations; previously, only the other way (pure ops merged into
effectful ops) was possible. This will allow, for example, a load+ALU-op
combination, as is common on x86. It should even allow a load + ALU-op +
store sequence to merge into one lowered instruction.
The scheme arose from many fruitful discussions with @julian-seward1
(thanks!); significant credit is due to him for the insights here.
The first insight is that given the right basic conditions, i.e. that
the root instruction is the only use of an effectful instruction's
result, all we need is that the "color" of the effectful instruction is
*one less* than the color of the current instruction. It's easier to
think about colors on the program points between instructions: if the
color coming *out* of the first (effectful def) instruction and *in* to
the second (effectful or effect-free use) instruction are the same, then
they can merge. Basically the color denotes a version of global state;
if the same, then no other effectful ops happened in the meantime.
The second insight is that we can keep state as we scan, tracking the
"current color", and *update* this when we sink (merge) an op. Hence
when we sink a load into another op, we effectively *re-color* every
instruction it moved over; this may allow further sinks.
Consider the example (and assume that we consider loads effectful in
order to conservatively ensure a strong memory model; otherwise, replace
with other effectful value-producing insts):
```
v0 = load x
v1 = load y
v2 = add v0, 1
v3 = add v1, 1
```
Scanning from bottom to top, we first see the add producing `v3` and we
can sink the load producing `v1` into it, producing a load + ALU-op
machine instruction. This is legal because `v1` moves over only `v2`,
which is a pure instruction. Consider, though, `v2`: under a simple
scheme that has no other context, `v0` could not sink to `v2` because it
would move over `v1`, another load. But because we already sunk `v1`
down to `v3`, we are free to sink `v0` to `v2`; the update of the
"current color" during the scan allows this.
This PR also cleans up the `LowerCtx` interface a bit at the same time:
whereas previously it always gave some subset of (constant, mergeable
inst, register) directly from `LowerCtx::get_input()`, it now returns
zero or more of (constant, mergable inst) from
`LowerCtx::maybe_get_input_as_source_or_const()`, and returns the
register only from `LowerCtx::put_input_in_reg()`. This removes the need
to explicitly denote uses of the register, so it's a little safer.
Note that this PR does not actually make use of the new ability to merge
loads into other ops; that will come in future PRs, especially to
optimize the `x64` backend by using direct-memory operands.
This refactors the handling of Inst::Extend and simplifies the lowering
of Bextend and Bmask, which allows the use of SBFX instructions for
extensions from 1-bit booleans. Other extensions use aliases of BFM,
and the code was changed to reflect that, rather than hard coding bit
patterns. Also ImmLogic is now implemented, so another hard coded
instruction can be removed.
As part of looking at boolean handling, `normalize_boolean_result` was
changed to `materialize_boolean_result`, such that it can use either
CSET or CSETM. Using CSETM saves an instruction (previously CSET + SUB)
for booleans bigger than 1-bit.
Copyright (c) 2020, Arm Limited.
`lucetc` currently *almost*, but not quite, works with the new x64
backend; the only missing piece is support for the particular
instructions emitted as part of its prologue stack-check.
We do not normally see `brff`, `brif`, or `ifcmp_sp` in CLIF generated by
`cranelift-wasm` without the old-backend legalization rules, so these
were not supported in the new x64 backend as they were not necessary for
Wasm MVP support. Using them resulted in an `unimplemented!()` panic.
This PR adds support for `brff` and `brif` analogously to how AArch64
implements them, by pattern-matching the `ifcmp` / `ffcmp` directly.
Then `ifcmp_sp` is a straightforward variant of `ifcmp`.
Along the way, this also removes the notion of "fallthrough block" from
the branch-group lowering method; instead, `fallthrough` instructions
are handled as normal branches to their explicitly-provided targets,
which (in the original CLIF) match the fallthrough block. The reason for
this is that the block reordering done as part of lowering can change
the fallthrough block. We were not using `fallthrough` instructions in
the output produced by `cranelift-wasm`, so this, too, was not
previously caught.
With these changes, the `lucetc` crate in Lucet passes all tests with
the `x64` feature-flag added to its `cranelift-codegen` dependency.
This changes the following:
mov x0, #4
ldr x0, [x1, #4]
Into:
ldr x0, [x1]
I noticed this pattern (but with #0), in a benchmark.
Copyright (c) 2020, Arm Limited.
This patch implements, for aarch64, the following wasm SIMD extensions.
v128.load32_zero and v128.load64_zero instructions
https://github.com/WebAssembly/simd/pull/237
The changes are straightforward:
* no new CLIF instructions. They are translated into an existing CLIF scalar
load followed by a CLIF `scalar_to_vector`.
* the comment/specification for CLIF `scalar_to_vector` has been changed to
match the actual intended semantics, per consulation with Andrew Brown.
* translation from `scalar_to_vector` to aarch64 `fmov` instruction. This
has been generalised slightly so as to allow both 32- and 64-bit transfers.
* special-case zero in `lower_constant_f128` in order to avoid a
potentially slow call to `Inst::load_fp_constant128`.
* Once "Allow loads to merge into other operations during instruction
selection in MachInst backends"
(https://github.com/bytecodealliance/wasmtime/issues/2340) lands,
we can use that functionality to pattern match the two-CLIF pair and
emit a single AArch64 instruction.
* A simple filetest has been added.
There is no comprehensive testcase in this commit, because that is a separate
repo. The implementation has been tested, nevertheless.
In particular, introduce initial support for the MOVI and MVNI
instructions, with 8-bit elements. Also, treat vector constants
as 32- or 64-bit floating-point numbers, if their value allows
it, by relying on the architectural zero extension. Finally,
stop generating literal loads for 32-bit constants.
Copyright (c) 2020, Arm Limited.
This change abstracts away (from the perspective of the new backend) how immediate values are stored in InstructionData. It gathers large immediates from necessary places (e.g. constant pool) and delegates to `InstructionData::imm_value` for the rest. This refactor only touches original users of `LowerCtx::get_immediate` but a future change could do the same for any place the new backend is accessing InstructionData directly to retrieve immediates.
It does this by providing an implementation of the CLIF instructions `AtomicRmw`, `AtomicCas`,
`AtomicLoad`, `AtomicStore` and `Fence`.
The translation is straightforward. `AtomicCas` is translated into x64 `cmpxchg`, `AtomicLoad`
becomes a normal load because x64-TSO provides adequate sequencing, `AtomicStore` becomes a
normal store followed by `mfence`, and `Fence` becomes `mfence`. `AtomicRmw` is the only
complex case: it becomes a normal load, followed by a loop which computes an updated value,
tries to `cmpxchg` it back to memory, and repeats if necessary.
This is a minimum-effort initial implementation. `AtomicRmw` could be implemented more
efficiently using LOCK-prefixed integer read-modify-write instructions in the case where the old
value in memory is not required. Subsequent work could add that, if required.
The x64 emitter has been updated to emit the new instructions, obviously. The `LegacyPrefix`
mechanism has been revised to handle multiple prefix bytes, not just one, since it is now
sometimes necessary to emit both 0x66 (Operand Size Override) and F0 (Lock).
In the aarch64 implementation of atomics, there has been some minor renaming for the sake of
clarity, and for consistency with this x64 implementation.
