Addresses #3809: when we are asked to create a Cranelift backend with
shared flags that indicate support for SIMD, we should check that the
ISA level needed for our SIMD lowerings is present.
In #3721, we have been discussing what to do about the ARM32 backend in
Cranelift. Currently, this backend supports only 32-bit types, which is
insufficient for full Wasm-MVP; it's missing other critical bits, like
floating-point support; and it has only ever been exercised, AFAIK, via
the filetests for the individual CLIF instructions that are implemented.
We were very very thankful for the original contribution of this
backend, even in its partial state, and we had hoped at the time that we
could eventually mature it in-tree until it supported e.g. Wasm and
other use-cases. But that hasn't yet happened -- to the blame of no-one,
to be clear, we just haven't had a contributor with sufficient time.
Unfortunately, the existence of the backend and lack of active
maintainer now potentially pose a bit of a burden as we hope to make
continuing changes to the backend framework. For example, the ISLE
migration, and the use of regalloc2 that it will allow, would need all
of the existing lowering patterns in the hand-written ARM32 backend to
be rewritten as ISLE rules.
Given that we don't currently have the resources to do this, we think
it's probably best if we, sadly, for now remove this partial backend.
This is not in any way a statement of what we might accept in the
future, though. If, in the future, an ARM32 backend updated to our
latest codebase with an active maintainer were to appear, we'd be happy
to merge it (and likewise for any other architecture!). But for now,
this is probably the best path. Thanks again to the original contributor
@jmkrauz and we hope that this work can eventually be brought back and
reused if someone has the time to do so!
Some platforms such as AArch64 Linux support different memory page
sizes, so we need to be conservative when choosing the code section
alignment (which is equal to the page size) by using the maximum.
Copyright (c) 2021, Arm Limited.
This also paves the way for unifying TargetIsa and MachBackend, since now they map one to one. In theory the two traits could be merged, which would be nice to limit the number of total concepts. Also they have quite different responsibilities, so it might be fine to keep them separate.
Interestingly, this PR started as removing RegInfo from the TargetIsa trait since the adapter returned a dummy value there. From the fallout, noticed that all Display implementations didn't needed an ISA anymore (since these were only used to render ISA specific registers). Also the whole family of RegInfo / ValueLoc / RegUnit was exclusively used for the old backend, and these could be removed. Notably, some IR instructions needed to be removed, because they were using RegUnit too: this was the oddball of regfill / regmove / regspill / copy_special, which were IR instructions inserted by the old regalloc. Fare thee well!
These backends will be removed in the future (see
bytecodealliance/rfcs#12 and the pending #3009 in this repo).
In the meantime, to more clearly communicate that they are using
"legacy" APIs and will eventually be removed, this PR places them in an
`isa/legacy/` subdirectory. No functional changes otherwise.
This adds support for the IBM z/Architecture (s390x-ibm-linux).
The status of the s390x backend in its current form is:
- Wasmtime is fully functional and passes all tests on s390x.
- All back-end features supported, with the exception of SIMD.
- There is still a lot of potential for performance improvements.
- Currently the only supported processor type is z15.
* Fully support multiple returns in Wasmtime
For quite some time now Wasmtime has "supported" multiple return values,
but only in the mose bare bones ways. Up until recently you couldn't get
a typed version of functions with multiple return values, and never have
you been able to use `Func::wrap` with functions that return multiple
values. Even recently where `Func::typed` can call functions that return
multiple values it uses a double-indirection by calling a trampoline
which calls the real function.
The underlying reason for this lack of support is that cranelift's ABI
for returning multiple values is not possible to write in Rust. For
example if a wasm function returns two `i32` values there is no Rust (or
C!) function you can write to correspond to that. This commit, however
fixes that.
This commit adds two new ABIs to Cranelift: `WasmtimeSystemV` and
`WasmtimeFastcall`. The intention is that these Wasmtime-specific ABIs
match their corresponding ABI (e.g. `SystemV` or `WindowsFastcall`) for
everything *except* how multiple values are returned. For multiple
return values we simply define our own version of the ABI which Wasmtime
implements, which is that for N return values the first is returned as
if the function only returned that and the latter N-1 return values are
returned via an out-ptr that's the last parameter to the function.
These custom ABIs provides the ability for Wasmtime to bind these in
Rust meaning that `Func::wrap` can now wrap functions that return
multiple values and `Func::typed` no longer uses trampolines when
calling functions that return multiple values. Although there's lots of
internal changes there's no actual changes in the API surface area of
Wasmtime, just a few more impls of more public traits which means that
more types are supported in more places!
Another change made with this PR is a consolidation of how the ABI of
each function in a wasm module is selected. The native `SystemV` ABI,
for example, is more efficient at returning multiple values than the
wasmtime version of the ABI (since more things are in more registers).
To continue to take advantage of this Wasmtime will now classify some
functions in a wasm module with the "fast" ABI. Only functions that are
not reachable externally from the module are classified with the fast
ABI (e.g. those not exported, used in tables, or used with `ref.func`).
This should enable purely internal functions of modules to have a faster
calling convention than those which might be exposed to Wasmtime itself.
Closes#1178
* Tweak some names and add docs
* "fix" lightbeam compile
* Fix TODO with dummy environ
* Unwind info is a property of the target, not the ABI
* Remove lightbeam unused imports
* Attempt to fix arm64
* Document new ABIs aren't stable
* Fix filetests to use the right target
* Don't always do 64-bit stores with cranelift
This was overwriting upper bits when 32-bit registers were being stored
into return values, so fix the code inline to do a sized store instead
of one-size-fits-all store.
* At least get tests passing on the old backend
* Fix a typo
* Add some filetests with mixed abi calls
* Get `multi` example working
* Fix doctests on old x86 backend
* Add a mixture of wasmtime/system_v tests
This PR switches the default backend on x86, for both the
`cranelift-codegen` crate and for Wasmtime, to the new
(`MachInst`-style, `VCode`-based) backend that has been under
development and testing for some time now.
The old backend is still available by default in builds with the
`old-x86-backend` feature, or by requesting `BackendVariant::Legacy`
from the appropriate APIs.
As part of that switch, it adds some more runtime-configurable plumbing
to the testing infrastructure so that tests can be run using the
appropriate backend. `clif-util test` is now capable of parsing a
backend selector option from filetests and instantiating the correct
backend.
CI has been updated so that the old x86 backend continues to run its
tests, just as we used to run the new x64 backend separately.
At some point, we will remove the old x86 backend entirely, once we are
satisfied that the new backend has not caused any unforeseen issues and
we do not need to revert.
This commit changes how both the shared flags and ISA flags are stored in the
serialized module to detect incompatibilities when a serialized module is
instantiated.
It improves the error reporting when a compiled module has mismatched shared
flags.
This commit adds the `wasmtime settings` command to print out available
Cranelift settings for a target (defaults to the host).
The compile command has been updated to remove the Cranelift ISA options in
favor of encouraging users to use `wasmtime settings` to discover what settings
are available. This will reduce the maintenance cost for syncing the compile
command with Cranelift ISA flags.
This commit adds a `compile` command to the Wasmtime CLI.
The command can be used to Ahead-Of-Time (AOT) compile WebAssembly modules.
With the `all-arch` feature enabled, AOT compilation can be performed for
non-native architectures (i.e. cross-compilation).
The `Module::compile` method has been added to perform AOT compilation.
A few of the CLI flags relating to "on by default" Wasm features have been
changed to be "--disable-XYZ" flags.
A simple example of using the `wasmtime compile` command:
```text
$ wasmtime compile input.wasm
$ wasmtime input.cwasm
```
* Remove some uses of riscv in tests
* Fix typo
* Apply suggestions from code review
* Apply suggestions from code review
Co-authored-by: Benjamin Bouvier <public@benj.me>
With `Module::{serialize,deserialize}` it should be possible to share
wasmtime modules across machines or CPUs. Serialization, however, embeds
a hash of all configuration values, including cranelift compilation
settings. By default wasmtime's selection of the native ISA would enable
ISA flags according to CPU features available on the host, but the same
CPU features may not be available across two machines.
This commit adds a `Config::cranelift_clear_cpu_flags` method which
allows clearing the target-specific ISA flags that are automatically
inferred by default for the native CPU. Options can then be
incrementally built back up as-desired with teh `cranelift_other_flag`
method.
This PR propagates "value labels" all the way from CLIF to DWARF
metadata on the emitted machine code. The key idea is as follows:
- Translate value-label metadata on the input into "value_label"
pseudo-instructions when lowering into VCode. These
pseudo-instructions take a register as input, denote a value label,
and semantically are like a "move into value label" -- i.e., they
update the current value (as seen by debugging tools) of the given
local. These pseudo-instructions emit no machine code.
- Perform a dataflow analysis *at the machine-code level*, tracking
value-labels that propagate into registers and into [SP+constant]
stack storage. This is a forward dataflow fixpoint analysis where each
storage location can contain a *set* of value labels, and each value
label can reside in a *set* of storage locations. (Meet function is
pairwise intersection by storage location.)
This analysis traces value labels symbolically through loads and
stores and reg-to-reg moves, so it will naturally handle spills and
reloads without knowing anything special about them.
- When this analysis converges, we have, at each machine-code offset, a
mapping from value labels to some number of storage locations; for
each offset for each label, we choose the best location (prefer
registers). Note that we can choose any location, as the symbolic
dataflow analysis is sound and guarantees that the value at the
value_label instruction propagates to all of the named locations.
- Then we can convert this mapping into a format that the DWARF
generation code (wasmtime's debug crate) can use.
This PR also adds the new-backend variant to the gdb tests on CI.
This PR adds a new `isa::lookup_variant()` that takes a `BackendVariant`
(`Legacy`, `MachInst` or `Any`), and exposes both x86 backends as
separate variants if both are compiled into the build.
This will allow some new use-cases that require both backends in the
same process: for example, differential fuzzing between old and new
backends, or perhaps allowing for dynamic feature-flag selection between
the backends.
WebAssembly memory operations are by definition little-endian even on
big-endian target platforms. However, other memory accesses will require
native target endianness (e.g. to access parts of the VMContext that is
also accessed by VM native code). This means on big-endian targets,
the code generator will have to handle both little- and big-endian
memory accesses. However, there is currently no way to encode that
distinction into the Cranelift IR that describes memory accesses.
This patch provides such a way by adding an (optional) explicit
endianness marker to an instance of MemFlags. Since each Cranelift IR
instruction that describes memory accesses already has an instance of
MemFlags attached, this can now be used to provide endianness
information.
Note that by default, memory accesses will continue to use the native
target ISA endianness. To override this to specify an explicit
endianness, a MemFlags value that was built using the set_endianness
routine must be used. This patch does so for accesses that implement
WebAssembly memory operations.
This patch addresses issue #2124.
Some of the test failures tracked by #2079 are in unwind tests that are
specific to the old x86 backend: namely, these tests invoke the unwind
implementation that is paired with the old backend, rather than generic
over all backends. It thus doesn't make sense to try to run these tests
with the new backend. (The new backend's unwind code should have
analogous tests written/ported over eventually.)
It seems that we were actually building *both* x86 backends when the
`x64` feature was enabled, except that the old x86 backend would never
be instantiated by the usual ISA-lookup logic because a `x86-64` target
triple unconditionally resolves to the new one.
This PR resolves both of the issues by tweaking the feature-config
directives to exclude the `x86` backend when `x64` is enabled.
Before this patch, running the x64 new backend would require both
compiling with --features experimental_x64 and running with
`use_new_backend`.
This patches changes this behavior so that the runtime flag is not
needed anymore: using the feature flag will enforce usage of the new
backend everywhere, making using and testing it much simpler:
cargo run --features experimental_x64 ;; other CLI options/flags
This also gives a hint at what the meta language generation would look
like after switching to the new backend.
Compiling only with the x64 codegen flag gives a nice compile time speedup.
This introduces two changes:
- first, a Cargo feature is added to make it possible to use the
Cranelift x64 backend directly from wasmtime's CLI.
- second, when passing a `cranelift-flags` parameter, and the given
parameter's name doesn't exist at the target-independent flag level, try
to set it as a target-dependent setting.
These two changes make it possible to try out the new x64 backend with:
cargo run --features experimental_x64 -- run --cranelift-flags use_new_backend=true -- /path/to/a.wasm
Right now, this will fail because most opcodes required by the
trampolines are actually not implemented yet.
This patch includes:
- A complete rework of the way that CLIF blocks and edge blocks are
lowered into VCode blocks. The new mechanism in `BlockLoweringOrder`
computes RPO over the CFG, but with a twist: it merges edge blocks intto
heads or tails of original CLIF blocks wherever possible, and it does
this without ever actually materializing the full nodes-plus-edges
graph first. The backend driver lowers blocks in final order so
there's no need to reshuffle later.
- A new `MachBuffer` that replaces the `MachSection`. This is a special
version of a code-sink that is far more than a humble `Vec<u8>`. In
particular, it keeps a record of label definitions and label uses,
with a machine-pluggable `LabelUse` trait that defines various types
of fixups (basically internal relocations).
Importantly, it implements some simple peephole-style branch rewrites
*inline in the emission pass*, without any separate traversals over
the code to use fallthroughs, swap taken/not-taken arms, etc. It
tracks branches at the tail of the buffer and can (i) remove blocks
that are just unconditional branches (by redirecting the label), (ii)
understand a conditional/unconditional pair and swap the conditional
polarity when it's helpful; and (iii) remove branches that branch to
the fallthrough PC.
The `MachBuffer` also implements branch-island support. On
architectures like AArch64, this is needed to allow conditional
branches within plausibly-attainable ranges (+/- 1MB on AArch64
specifically). It also does this inline while streaming through the
emission, without any sort of fixpoint algorithm or later moving of
code, by simply tracking outstanding references and "deadlines" and
emitting an island just-in-time when we're in danger of going out of
range.
- A rework of the instruction selector driver. This is largely following
the same algorithm as before, but is cleaned up significantly, in
particular in the API: the machine backend can ask for an input arg
and get any of three forms (constant, register, producing
instruction), indicating it needs the register or can merge the
constant or producing instruction as appropriate. This new driver
takes special care to emit constants right at use-sites (and at phi
inputs), minimizing their live-ranges, and also special-cases the
"pinned register" to avoid superfluous moves.
Overall, on `bz2.wasm`, the results are:
wasmtime full run (compile + runtime) of bz2:
baseline: 9774M insns, 9742M cycles, 3.918s
w/ changes: 7012M insns, 6888M cycles, 2.958s (24.5% faster, 28.3% fewer insns)
clif-util wasm compile bz2:
baseline: 2633M insns, 3278M cycles, 1.034s
w/ changes: 2366M insns, 2920M cycles, 0.923s (10.7% faster, 10.1% fewer insns)
All numbers are averages of two runs on an Ampere eMAG.
This commit makes the following changes to unwind information generation in
Cranelift:
* Remove frame layout change implementation in favor of processing the prologue
and epilogue instructions when unwind information is requested. This also
means this work is no longer performed for Windows, which didn't utilize it.
It also helps simplify the prologue and epilogue generation code.
* Remove the unwind sink implementation that required each unwind information
to be represented in final form. For FDEs, this meant writing a
complete frame table per function, which wastes 20 bytes or so for each
function with duplicate CIEs. This also enables Cranelift users to collect the
unwind information and write it as a single frame table.
* For System V calling convention, the unwind information is no longer stored
in code memory (it's only a requirement for Windows ABI to do so). This allows
for more compact code memory for modules with a lot of functions.
* Deletes some duplicate code relating to frame table generation. Users can
now simply use gimli to create a frame table from each function's unwind
information.
Fixes#1181.
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This patch ties together the new backend infrastructure with the
existing Cranelift codegen APIs.
With all patches in this series up to this patch applied, the ARM64
compiler is now functional and can be used. Two uses of this
functionality -- filecheck-based tests and integration into wasmtime --
will come in subsequent patches.
This patch adds the MachInst, or Machine Instruction, infrastructure.
This is the machine-independent portion of the new backend design. It
contains the implementation of the "vcode" (virtual-registerized code)
container, the top-level lowering algorithm and compilation pipeline,
and the trait definitions that the machine backends will fill in.
This backend infrastructure is included in the compilation of the
`codegen` crate, but it is not yet tied into the public APIs; that patch
will come last, after all the other pieces are filled in.
This patch contains code written by Julian Seward <jseward@acm.org> and
Benjamin Bouvier <public@benj.me>, originally developed on a side-branch
before rebasing and condensing into this patch series. See the `arm64`
branch at `https://github.com/cfallin/wasmtime` for original development
history.
Co-authored-by: Julian Seward <jseward@acm.org>
Co-authored-by: Benjamin Bouvier <public@benj.me>
This removes the old ARM64 backend completely, leaving only an empty
`arm64` module. The tree at this state will not build with the `arm64`
feature enabled, but that feature has to be enabled explicitly (it is
not default). Subsequent patches will fill in the new backend.
Preserve FPRs as required by the Windows fastcall calling convention.
This exposes an implementation limit due to Cranelift's approach to stack layout, which conflicts with expectations Windows makes in SEH layout - functions where the Cranelift user desires fastcall unwind information, that require preservation of an ABI-reserved FPR, that have a stack frame 240 bytes or larger, now produce an error when compiled. Several wasm spectests were disabled because they would trip this limit. This is a temporary constraint that should be fixed promptly.
Co-authored-by: bjorn3 <bjorn3@users.noreply.github.com>
