* x64: Add most remaining AVX lowerings
This commit goes through `inst.isle` and adds a corresponding AVX
lowering for most SSE lowerings. I opted to skip instructions where the
SSE lowering didn't read/modify a register, such as `roundps`. I think
that AVX will benefit these instructions when there's load-merging since
AVX doesn't require alignment, but I've deferred that work to a future
PR.
Otherwise though in this PR I think all (or almost all) of the 3-operand
forms of AVX instructions are supported with their SSE counterparts.
This should ideally improve codegen slightly by removing register
pressure and the need for `movdqa` between registers. I've attempted to
ensure that there's at least one codegen test for all the new instructions.
As a side note, the recent capstone integration into `precise-output`
tests helped me catch a number of encoding bugs much earlier than
otherwise, so I've found that incredibly useful in tests!
* Move `vpinsr*` instructions to their own variant
Use true `XmmMem` and `GprMem` types in the instruction as well to get
more type-level safety for what goes where.
* Remove `Inst::produces_const` accessor
Instead of conditionally defining regalloc and various other operations
instead add dedicated `MInst` variants for operations which are intended
to produce a constant to have more clear interactions with regalloc and
printing and such.
* Fix tests
* Register traps in `MachBuffer` for load-folding ops
This adds a missing `add_trap` to encoding of VEX instructions with
memory operands to ensure that if they cause a segfault that there's
appropriate metadata for Wasmtime to understand that the instruction
could in fact trap. This fixes a fuzz test case found locally where v8
trapped and Wasmtime didn't catch the signal and crashed the fuzzer.
* x64: Add rudimentary support for some AVX instructions
I was poking around Spidermonkey's wasm backend and saw that the various
assembler functions used are all `v*`-prefixed which look like they're
intended for use with AVX instructions. I looked at Cranelift and it
currently doesn't have support for many AVX-based instructions, so I
figured I'd take a crack at it!
The support added here is a bit of a mishmash when viewed alone, but my
general goal was to take a single instruction from the SIMD proposal for
WebAssembly and migrate all of its component instructions to AVX. I, by
random chance, picked a pretty complicated instruction of `f32x4.min`.
This wasm instruction is implemented on x64 with 4 unique SSE
instructions and ended up being a pretty good candidate.
Further digging about AVX-vs-SSE shows that there should be two major
benefits to using AVX over SSE:
* Primarily AVX instructions largely use a three-operand form where two
input registers are operated with and an output register is also
specified. This is in contrast to SSE's predominant
one-register-is-input-but-also-output pattern. This should help free
up the register allocator a bit and additionally remove the need for
movement between registers.
* As #4767 notes the memory-based operations of VEX-encoded instructions
(aka AVX instructions) do not have strict alignment requirements which
means we would be able to sink loads and stores into individual
instructions instead of having separate instructions.
So I set out on my journey to implement the instructions used by
`f32x4.min`. The first few were fairly easy. The machinst backends are
already of the shape "take these inputs and compute the output" where
the x86 requirement of a register being both input and output is
postprocessed in. This means that the `inst.isle` creation helpers for
SSE instructions were already of the correct form to use AVX. I chose to
add new `rule` branches for the instruction creation helpers, for
example `x64_andnps`. The new `rule` conditionally only runs if AVX is
enabled and emits an AVX instruction instead of an SSE instruction for
achieving the same goal. This means that no lowerings of clif
instructions were modified, instead just new instructions are being
generated.
The VEX encoding was previously not heavily used in Cranelift. The only
current user are the FMA-style instructions that Cranelift has at this
time. These FMA instructions have one extra operand than `vandnps`, for
example, so I split the existing `XmmRmRVex` into a few more variants to
fit the shape of the instructions that needed generating for
`f32x4.min`. This was accompanied then with more AVX opcode definitions,
more emission support, etc.
Upon implementing all of this it turned out that the test suite was
failing on my machine due to the memory-operand encodings of VEX
instructions not being supported. I didn't explicitly add those in
myself but some preexisting RIP-relative addressing was leaking into the
new instructions with existing tests. I opted to go ahead and fill out
the memory addressing modes of VEX encoding to get the tests passing
again.
All-in-all this PR adds new instructions to the x64 backend for a number
of AVX instructions, updates 5 existing instruction producers to use AVX
instructions conditionally, implements VEX memory operands, and adds
some simple tests for the new output of `f32x4.min`. The existing
runtest for `f32x.min` caught a few intermediate bugs along the way and
I additionally added a plain `target x86_64` to that runtest to ensure
that it executes with and without AVX to test the various lowerings.
I'll also note that this, and future support, should be well-fuzzed
through Wasmtime's fuzzing which may explicitly disable AVX support
despite the machine having access to AVX, so non-AVX lowerings should be
well-tested into the future.
It's also worth mentioning that I am not an AVX or VEX or x64 expert.
Implementing the memory operand part for VEX was the hardest part of
this PR and while I think it should be good someone else should
definitely double-check me. Additionally I haven't added many
instructions to the x64 backend yet so I may have missed obvious places
to tests or such, so am happy to follow-up with anything to be more
thorough if necessary.
Finally I should note that this is just the tip of the iceberg when it
comes to AVX. My hope is to get some of the idioms sorted out to make it
easier for future PRs to add one-off instruction lowerings or such.
* Review feedback
* Turn off probestack by default in Cranelift
The probestack feature is not implemented for the aarch64 and s390x
backends and currently the on-by-default status requires the aarch64 and
s390x implementations to be a stub. Turning off probestack by default
allows the s390x and aarch64 backends to panic with an error message to
avoid providing a false sense of security. When the probestack option is
implemented for all backends, however, it may be reasonable to
re-enable.
* aarch64: Improve codegen for AMode fallback
Currently the final fallback for finalizing an `AMode` will generate
both a constant-loading instruction as well as an `add` instruction to
the base register into the same temporary. This commit improves the
codegen by removing the `add` instruction and folding the final add into
the finalized `AMode`. This changes the `extendop` used but both
registers are 64-bit so shouldn't be affected by the extending
operation.
* aarch64: Implement inline stack probes
This commit implements inline stack probes for the aarch64 backend in
Cranelift. The support here is modeled after the x64 support where
unrolled probes are used up to a particular threshold after which a loop
is generated. The instructions here are similar in spirit to x64 except
that unlike x64 the stack pointer isn't modified during the unrolled
loop to avoid needing to re-adjust it back up at the end of the loop.
* Enable inline probestack for AArch64 and Riscv64
This commit enables inline probestacks for the AArch64 and Riscv64
architectures in the same manner that x86_64 has it enabled now. Some
more testing was additionally added since on Unix platforms we should be
guaranteed that Rust's stack overflow message is now printed too.
* Enable probestack for aarch64 in cranelift-fuzzgen
* Address review comments
* Remove implicit stack overflow traps from x64 backend
This commit removes implicit `StackOverflow` traps inserted by the x64
backend for stack-based operations. This was historically required when
stack overflow was detected with page faults but Wasmtime no longer
requires that since it's not suitable for wasm modules which call host
functions. Additionally no other backend implements this form of
implicit trap-code additions so this is intended to synchronize the
behavior of all the backends.
This fixes a test added prior for aarch64 to properly abort the process
instead of accidentally being caught by Wasmtime.
* Fix a style issue
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* x64: Add VEX Instruction Encoder
This uses a similar builder pattern to the EVEX Encoder.
Does not yet support memory accesses.
* x64: Add FMA Flag
* x64: Implement SIMD `fma`
* x64: Use 4 register Vex Inst
* x64: Reorder VEX pretty print args
* Remove unused srcloc in MachReloc
* Remove unused srcloc in MachTrap
* Use `into_iter` on array in bench code to suppress a warning
* Remove unused srcloc in MachCallSite
* Allow emitting u64 constants into constant pool.
* Use constant pool for constants on x64 that do not fit in a simm32 and are needed as a RegMem or RegMemImm.
* Fix rip-relative addressing bug in pinsrd emission.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
This primary motivation of this large commit (apologies for its size!) is to
introduce `Gpr` and `Xmm` newtypes over `Reg`. This should help catch
difficult-to-diagnose register class mixup bugs in x64 lowerings.
But having a newtype for `Gpr` and `Xmm` themselves isn't enough to catch all of
our operand-with-wrong-register-class bugs, because about 50% of operands on x64
aren't just a register, but a register or memory address or even an
immediate! So we have `{Gpr,Xmm}Mem[Imm]` newtypes as well.
Unfortunately, `GprMem` et al can't be `enum`s and are therefore a little bit
noisier to work with from ISLE. They need to maintain the invariant that their
registers really are of the claimed register class, so they need to encapsulate
the inner data. If they exposed the underlying `enum` variants, then anyone
could just change register classes or construct a `GprMem` that holds an XMM
register, defeating the whole point of these newtypes. So when working with
these newtypes from ISLE, we rely on external constructors like `(gpr_to_gpr_mem
my_gpr)` instead of `(GprMem.Gpr my_gpr)`.
A bit of extra lines of code are included to add support for register mapping
for all of these newtypes as well. Ultimately this is all a bit wordier than I'd
hoped it would be when I first started authoring this commit, but I think it is
all worth it nonetheless!
In the process of adding these newtypes, I didn't want to have to update both
the ISLE `extern` type definition of `MInst` and the Rust definition, so I move
the definition fully into ISLE, similar as aarch64.
Finally, this process isn't complete. I've introduced the newtypes here, and
I've made most XMM-using instructions switch from `Reg` to `Xmm`, as well as
register class-converting instructions, but I haven't moved all of the GPR-using
instructions over to the newtypes yet. I figured this commit was big enough as
it was, and I can continue the adoption of these newtypes in follow up commits.
Part of #3685.
In order to benchmark the encoding code with criterion, the functions
and structures must be public. Moving this code to its own module
(instead of keeping as a submodule to `inst`), allows `inst` to remain
private. This avoids having to expose and document (or ignore
documenting) the numerous instruction variants in `inst` while allowing
access to the encoding code. This commit changes no functionality.
