This also paves the way for unifying TargetIsa and MachBackend, since now they map one to one. In theory the two traits could be merged, which would be nice to limit the number of total concepts. Also they have quite different responsibilities, so it might be fine to keep them separate.
Interestingly, this PR started as removing RegInfo from the TargetIsa trait since the adapter returned a dummy value there. From the fallout, noticed that all Display implementations didn't needed an ISA anymore (since these were only used to render ISA specific registers). Also the whole family of RegInfo / ValueLoc / RegUnit was exclusively used for the old backend, and these could be removed. Notably, some IR instructions needed to be removed, because they were using RegUnit too: this was the oddball of regfill / regmove / regspill / copy_special, which were IR instructions inserted by the old regalloc. Fare thee well!
Implemented the following Opcodes for the Cranelift interpreter:
- `Unarrow` to combine two SIMD vectors into a new vector with twice
the lanes but half the width, with signed inputs which are clamped to
`0x00`.
- `Uunarrow` to perform the same operation as `Unarrow` but treating
inputs as unsigned.
- `Snarrow` to perform the same operation as `Unarrow` but treating
both inputs and outputs as signed, and saturating accordingly.
Note that all 3 instructions saturate at the type boundaries.
Copyright (c) 2021, Arm Limited
Implemented `SaddSat` and `SsubSat` to add and subtract signed vector
values, saturating at the type boundaries rather than overflowing.
Changed the parser to allow signed `i8` immediates in vectors as part of
this work; fixes#3276.
Copyright (c) 2021, Arm Limited.
Implemented `Insertlane` to insert a value in the lane specified by the
immediate value, overwriting the existing value in that lane.
Added `TernaryImm8` support for the `imm_value` function.
Copyright (c) 2021, Arm Limited.
* cranelift: Add stack support to the interpreter
We also change the approach for heap loads and stores.
Previously we would use the offset as the address to the heap. However,
this approach does not allow using the load/store instructions to
read/write from both the heap and the stack.
This commit changes the addressing mechanism of the interpreter. We now
return the real addresses from the addressing instructions
(stack_addr/heap_addr), and instead check if the address passed into
the load/store instructions points to an area in the heap or the stack.
* cranelift: Add virtual addresses to cranelift interpreter
Adds a Virtual Addressing scheme that was discussed as a better
alternative to returning the real addresses.
The virtual addresses are split into 4 regions (stack, heap, tables and
global values), and the address itself is composed of an `entry` field
and an `offset` field. In general the `entry` field corresponds to the
instance of the resource (e.g. table5 is entry 5) and the `offset` field
is a byte offset inside that entry.
There is one exception to this which is the stack, where due to only
having one stack, the whole address is an offset field.
The number of bits in entry vs offset fields is variable with respect to
the `region` and the address size (32bits vs 64bits). This is done
because with 32 bit addresses we would have to compromise on heap size,
or have a small number of global values / tables. With 64 bit addresses
we do not have to compromise on this, but we need to support 32 bit
addresses.
* cranelift: Remove interpreter trap codes
* cranelift: Calculate frame_offset when entering or exiting a frame
* cranelift: Add safe read/write interface to DataValue
* cranelift: DataValue write full 128bit slot for booleans
* cranelift: Use DataValue accessors for trampoline.
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
I've run up against the `Into`-vs-`From` impls a few times and figured
I'd go ahead and put up a refactoring. This switches `Into` impls into
`From` impls which allows using both traits instead of just the `Into`
version. Additionally this removes a few small `as` casts in favor of
infallible `from`/`into` or `try_from` with error handling.
* Change VMMemoryDefinition::current_length to `usize`
This commit changes the definition of
`VMMemoryDefinition::current_length` to `usize` from its previous
definition of `u32`. This is a pretty impactful change because it also
changes the cranelift semantics of "dynamic" heaps where the bound
global value specifier must now match the pointer type for the platform
rather than the index type for the heap.
The motivation for this change is that the `current_length` field (or
bound for the heap) is intended to reflect the current size of the heap.
This is bound by `usize` on the host platform rather than `u32` or`
u64`. The previous choice of `u32` couldn't represent a 4GB memory
because we couldn't put a number representing 4GB into the
`current_length` field. By using `usize`, which reflects the host's
memory allocation, this should better reflect the size of the heap and
allows Wasmtime to support a full 4GB heap for a wasm program (instead
of 4GB minus one page).
This commit also updates the legalization of the `heap_addr` clif
instruction to appropriately cast the address to the platform's pointer
type, handling bounds checks along the way. The practical impact for
today's targets is that a `uextend` is happening sooner than it happened
before, but otherwise there is no intended impact of this change. In the
future when 64-bit memories are supported there will likely need to be
fancier logic which handles offsets a bit differently (especially in the
case of a 64-bit memory on a 32-bit host).
The clif `filetest` changes should show the differences in codegen, and
the Wasmtime changes are largely removing casts here and there.
Closes#3022
* Add tests for memory.size at maximum memory size
* Add a dfg helper method
Fixes#2943, though not as optimally as may be desired. With x64 SIMD
instructions, the memory operand must be aligned--this change adds that
check. There are cases, however, where we can do better--see #3106.
Cranelift crates have historically been much more verbose with debug-level
logging than most other crates in the Rust ecosystem. We log things like how
many parameters a basic block has, the color of virtual registers during
regalloc, etc. Even for Cranelift hackers, these things are largely only useful
when hacking specifically on Cranelift and looking at a particular test case,
not even when using some Cranelift embedding (such as Wasmtime).
Most of the time, when people want logging for their Rust programs, they do
something like:
RUST_LOG=debug cargo run
This means that they get all that mostly not useful debug logging out of
Cranelift. So they might want to disable logging for Cranelift, or change it to
a higher log level:
RUST_LOG=debug,cranelift=info cargo run
The problem is that this is already more annoying to type that `RUST_LOG=debug`,
and that Cranelift isn't one single crate, so you actually have to play
whack-a-mole with naming all the Cranelift crates off the top of your head,
something more like this:
RUST_LOG=debug,cranelift=info,cranelift_codegen=info,cranelift_wasm=info,...
Therefore, we're changing most of the `debug!` logs into `trace!` logs: anything
that is very Cranelift-internal, unlikely to be useful/meaningful to the
"average" Cranelift embedder, or prints a message for each instruction visited
during a pass. On the other hand, things that just report a one line statistic
for a whole pass, for example, are left as `debug!`. The more verbose the log
messages are, the higher the bar they must clear to be `debug!` rather than
`trace!`.
When a block is unreachable, the `unreachable_code` pass will remove it,
which is perfectly sensible. Jump tables factor into unreachability in
an expected way: even if a block is listed in a jump table, the block
might be unreachable if the jump table itself is unused (or used in an
unreachable block). Unfortunately, the verifier still expects all
block refs in all jump tables to be valid, even after DCE, which will
not always be the case.
This makes a simple change to the pass: after removing blocks, it scans
jump tables. Any jump table that refers to an unreachable block must
itself be unused, and so we just clear its entries. We do not bother
removing it (and renumbering all later jumptables), and we do not bother
computing full unused-ness of all jumptables, as that would be more
expensive; it's sufficient to clear out the ones that refer to
unreachable blocks, which are a subset of all unused jumptables.
Fixes#2670.
This PR propagates "value labels" all the way from CLIF to DWARF
metadata on the emitted machine code. The key idea is as follows:
- Translate value-label metadata on the input into "value_label"
pseudo-instructions when lowering into VCode. These
pseudo-instructions take a register as input, denote a value label,
and semantically are like a "move into value label" -- i.e., they
update the current value (as seen by debugging tools) of the given
local. These pseudo-instructions emit no machine code.
- Perform a dataflow analysis *at the machine-code level*, tracking
value-labels that propagate into registers and into [SP+constant]
stack storage. This is a forward dataflow fixpoint analysis where each
storage location can contain a *set* of value labels, and each value
label can reside in a *set* of storage locations. (Meet function is
pairwise intersection by storage location.)
This analysis traces value labels symbolically through loads and
stores and reg-to-reg moves, so it will naturally handle spills and
reloads without knowing anything special about them.
- When this analysis converges, we have, at each machine-code offset, a
mapping from value labels to some number of storage locations; for
each offset for each label, we choose the best location (prefer
registers). Note that we can choose any location, as the symbolic
dataflow analysis is sound and guarantees that the value at the
value_label instruction propagates to all of the named locations.
- Then we can convert this mapping into a format that the DWARF
generation code (wasmtime's debug crate) can use.
This PR also adds the new-backend variant to the gdb tests on CI.
WebAssembly memory operations are by definition little-endian even on
big-endian target platforms. However, other memory accesses will require
native target endianness (e.g. to access parts of the VMContext that is
also accessed by VM native code). This means on big-endian targets,
the code generator will have to handle both little- and big-endian
memory accesses. However, there is currently no way to encode that
distinction into the Cranelift IR that describes memory accesses.
This patch provides such a way by adding an (optional) explicit
endianness marker to an instance of MemFlags. Since each Cranelift IR
instruction that describes memory accesses already has an instance of
MemFlags attached, this can now be used to provide endianness
information.
Note that by default, memory accesses will continue to use the native
target ISA endianness. To override this to specify an explicit
endianness, a MemFlags value that was built using the set_endianness
routine must be used. This patch does so for accesses that implement
WebAssembly memory operations.
This patch addresses issue #2124.
There has been some confusion over the meaning of the "sign-extend"
(`sext`) and "zero-extend" (`uext`) attributes on parameters and return
values in signatures. According to the three implemented backends, these
attributes indicate that a value narrower than a full register should
always be extended in the way specified. However, they are much more
useful if they mean "extend in this way if the ABI requires extending":
only the ABI backend knows whether or not a particular ABI (e.g., x64
SysV vs. x64 Baldrdash) requires extensions, while only the frontend
(CLIF generator) knows whether or not a value is signed, so the two have
to work in concert.
This is the result of some very helpful discussion in #2354 (thanks to
@uweigand for raising the issue and @bjorn3 for helping to reason about
it).
This change respects the extension attributes in the above way, rather
than unconditionally extending, to avoid potential performance
degradation as we introduce more extension attributes on signatures.
* Rewrite interpreter generically
This change re-implements the Cranelift interpreter to use generic values; this makes it possible to do abstract interpretation of Cranelift instructions. In doing so, the interpretation state is extracted from the `Interpreter` structure and is accessed via a `State` trait; this makes it possible to not only more clearly observe the interpreter's state but also to interpret using a dummy state (e.g. `ImmutableRegisterState`). This addition made it possible to implement more of the Cranelift instructions (~70%, ignoring the x86-specific instructions).
* Replace macros with closures
As discussed in #2251, in order to be very confident that NaN signaling bits are correctly handled by the compiler, this switches `DataValue` to use Cranelift's `Ieee32` and `Ieee64` structures. This makes it a bit more inconvenient to interpreter Cranelift FP operations but this should change to something like `rustc_apfloat` in the future.
This change abstracts away (from the perspective of the new backend) how immediate values are stored in InstructionData. It gathers large immediates from necessary places (e.g. constant pool) and delegates to `InstructionData::imm_value` for the rest. This refactor only touches original users of `LowerCtx::get_immediate` but a future change could do the same for any place the new backend is accessing InstructionData directly to retrieve immediates.
As part of a Wasm JIT update, SpiderMonkey is changing its internal
WebAssembly function ABI. The new ABI's frame format includes "caller
TLS" and "callee TLS" slots. The details of where these come from are
not important; from Cranelift's point of view, the only relevant
requirement is that we have two on-stack args that are always present
(offsetting other on-stack args), and that we define special argument
purposes so that we can supply values for these slots.
Note that this adds a *new* ABI (a variant of the Baldrdash ABI) because
we do not want to tightly couple the landing of this PR to the landing
of the changes in SpiderMonkey; it's better if both the old and new
behavior remain available in Cranelift, so SpiderMonkey can continue to
vendor Cranelift even if it does not land (or backs out) the ABI change.
Furthermore, note that this needs to be a Cranelift-level change (i.e.
cannot be done purely from the translator environment implementation)
because the special TLS arguments must always go on the stack, which
would not otherwise happen with the usual argument-placement logic; and
there is no primitive to push a value directly in CLIF code (the notion
of a stack frame is a lower-level concept).
The implementation is pretty straightforward. Wasm atomic instructions fall
into 5 groups
* atomic read-modify-write
* atomic compare-and-swap
* atomic loads
* atomic stores
* fences
and the implementation mirrors that structure, at both the CLIF and AArch64
levels.
At the CLIF level, there are five new instructions, one for each group. Some
comments about these:
* for those that take addresses (all except fences), the address is contained
entirely in a single `Value`; there is no offset field as there is with
normal loads and stores. Wasm atomics require alignment checks, and
removing the offset makes implementation of those checks a bit simpler.
* atomic loads and stores get their own instructions, rather than reusing the
existing load and store instructions, for two reasons:
- per above comment, makes alignment checking simpler
- reuse of existing loads and stores would require extension of `MemFlags`
to indicate atomicity, which sounds semantically unclean. For example,
then *any* instruction carrying `MemFlags` could be marked as atomic, even
in cases where it is meaningless or ambiguous.
* I tried to specify, in comments, the behaviour of these instructions as
tightly as I could. Unfortunately there is no way (per my limited CLIF
knowledge) to enforce the constraint that they may only be used on I8, I16,
I32 and I64 types, and in particular not on floating point or vector types.
The translation from Wasm to CLIF, in `code_translator.rs` is unremarkable.
At the AArch64 level, there are also five new instructions, one for each
group. All of them except `::Fence` contain multiple real machine
instructions. Atomic r-m-w and atomic c-a-s are emitted as the usual
load-linked store-conditional loops, guarded at both ends by memory fences.
Atomic loads and stores are emitted as a load preceded by a fence, and a store
followed by a fence, respectively. The amount of fencing may be overkill, but
it reflects exactly what the SM Wasm baseline compiler for AArch64 does.
One reason to implement r-m-w and c-a-s as a single insn which is expanded
only at emission time is that we must be very careful what instructions we
allow in between the load-linked and store-conditional. In particular, we
cannot allow *any* extra memory transactions in there, since -- particularly
on low-end hardware -- that might cause the transaction to fail, hence
deadlocking the generated code. That implies that we can't present the LL/SC
loop to the register allocator as its constituent instructions, since it might
insert spills anywhere. Hence we must present it as a single indivisible
unit, as we do here. It also has the benefit of reducing the total amount of
work the RA has to do.
The only other notable feature of the r-m-w and c-a-s translations into
AArch64 code, is that they both need a scratch register internally. Rather
than faking one up by claiming, in `get_regs` that it modifies an extra
scratch register, and having to have a dummy initialisation of it, these new
instructions (`::LLSC` and `::CAS`) simply use fixed registers in the range
x24-x28. We rely on the RA's ability to coalesce V<-->R copies to make the
cost of the resulting extra copies zero or almost zero. x24-x28 are chosen so
as to be call-clobbered, hence their use is less likely to interfere with long
live ranges that span calls.
One subtlety regarding the use of completely fixed input and output registers
is that we must be careful how the surrounding copy from/to of the arg/result
registers is done. In particular, it is not safe to simply emit copies in
some arbitrary order if one of the arg registers is a real reg. For that
reason, the arguments are first moved into virtual regs if they are not
already there, using a new method `<LowerCtx for Lower>::ensure_in_vreg`.
Again, we rely on coalescing to turn them into no-ops in the common case.
There is also a ridealong fix for the AArch64 lowering case for
`Opcode::Trapif | Opcode::Trapff`, which removes a bug in which two trap insns
in a row were generated.
In the patch as submitted there are 6 "FIXME JRS" comments, which mark things
which I believe to be correct, but for which I would appreciate a second
opinion. Unless otherwise directed, I will remove them for the final commit
but leave the associated code/comments unchanged.
* Refactor where results of compilation are stored
This commit refactors the internals of compilation in Wasmtime to change
where results of individual function compilation are stored. Previously
compilation resulted in many maps being returned, and compilation
results generally held all these maps together. This commit instead
switches this to have all metadata stored in a `CompiledFunction`
instead of having a separate map for each item that can be stored.
The motivation for this is primarily to help out with future
module-linking-related PRs. What exactly "module level" is depends on
how we interpret modules and how many modules are in play, so it's a bit
easier for operations in wasmtime to work at the function level where
possible. This means that we don't have to pass around multiple
different maps and a function index, but instead just one map or just
one entry representing a compiled function.
Additionally this change updates where the parallelism of compilation
happens, pushing it into `wasmtime-jit` instead of `wasmtime-environ`.
This is another goal where `wasmtime-jit` will have more knowledge about
module-level pieces with module linking in play. User-facing-wise this
should be the same in terms of parallel compilation, though.
The ultimate goal of this refactoring is to make it easier for the
results of compilation to actually be a set of wasm modules. This means
we won't be able to have a map-per-metadata where the primary key is the
function index, because there will be many modules within one "object
file".
* Don't clear out fields, just don't store them
Persist a smaller set of fields in `CompilationArtifacts` instead of
trying to clear fields out and dynamically not accessing them.
