* x64: Add non-SSE4.1 lowerings of `pmov{s,z}x*`
This commit adds lowerings for a suite of sign/zero extension
instructions which don't require SSE4.1. Like before these lowerings are
based on LLVM's output.
This commit also deletes special casees for `i16x8.extmul_{low,high}_*`
since the output of the special case is the same as the default lowering
of all the component instructions used within as well.
* Remove SSE4.1 specialization of `uwiden_high`
LLVM prefers the `punpckh*`-based lowerings and at least according to
`llvm-mca` these are slightly better cycle-wise too.
* x64: Add AVX encodings of `vcvt{ss2sd,sd2ss}`
Additionally update the instruction helpers to take an `XmmMem` argument
to allow load sinking into the instruction.
* x64: Add AVX encoding of `sqrts{s,d}`
* x64: Add AVX support for `rounds{s,d}`
* x64: Add instruction helpers for `mov{d,q}`
These will soon grow AVX-equivalents so move them to instruction helpers
to have clauses for AVX in the future.
* x64: Don't auto-convert between RegMemImm and XmmMemImm
The previous conversion, `mov_rmi_to_xmm`, would move from GPR registers
to XMM registers which isn't what many of the other `convert` statements
between these newtypes do. This seemed like a possible footgun so I've
removed the auto-conversion and added an explicit helper to go from a
`u32` to an `XmmMemImm`.
* x64: Add AVX encodings of some more GPR-related insns
This commit adds some more support for AVX instructions where GPRs are
in use mixed in with XMM registers. This required a few more variants of
`Inst` to handle the new instructions.
* Fix vpmovmskb encoding
* Fix xmm-to-gpr encoding of vmovd/vmovq
* Fix typo
* Fix rebase conflict
* Fix rebase conflict with tests
* Add a `MachBuffer::defer_trap` method
This commit adds a new method to `MachBuffer` to defer trap opcodes to
the end of a function in a similar manner to how constants are deferred
to the end of the function. This is useful for backends which frequently
use `TrapIf`-style opcodes. Currently a jump is emitted which skips the
next instruction, a trap, and then execution continues normally. While
there isn't any pressing problem with this construction the trap opcode
is in the middle of the instruction stream as opposed to "off on the
side" despite rarely being taken.
With this method in place all the backends (except riscv64 since I
couldn't figure it out easily enough) have a new lowering of their
`TrapIf` opcode. Now a trap is deferred, which returns a label, and then
that label is jumped to when executing the trap. A fixup is then
recorded in `MachBuffer` to get patched later on during emission, or at
the end of the function. Subsequently all `TrapIf` instructions
translate to a single branch plus a single trap at the end of the
function.
I've additionally further updated some more lowerings in the x64 backend
which were explicitly using traps to instead use `TrapIf` where
applicable to avoid jumping over traps mid-function. Other backends
didn't appear to have many jump-over-the-next-trap patterns.
Lots of tests have had their expectations updated here which should
reflect all the traps being sunk to the end of functions.
* Print trap code on all platforms
* Emit traps before constants
* Preserve source location information for traps
* Fix test expectations
* Attempt to fix s390x
The MachBuffer was registering trap codes with the first byte of the
trap, but the SIGILL handler was expecting it to be registered with the
last byte of the trap. Exploit that SIGILL is always represented with a
2-byte instruction and always march 2-backwards for SIGILL, continuing
to march backwards 1 byte for SIGFPE-generating instructions.
* Back out s390x changes
* Back out more s390x bits
* Review comments
* x64: Take SIGFPE signals for divide traps
Prior to this commit Wasmtime would configure `avoid_div_traps=true`
unconditionally for Cranelift. This, for the division-based
instructions, would change emitted code to explicitly trap on trap
conditions instead of letting the `div` x86 instruction trap.
There's no specific reason for Wasmtime, however, to specifically avoid
traps in the `div` instruction. This means that the extra generated
branches on x86 aren't necessary since the `div` and `idiv` instructions
already trap for similar conditions as wasm requires.
This commit instead disables the `avoid_div_traps` setting for
Wasmtime's usage of Cranelift. Subsequently the codegen rules were
updated slightly:
* When `avoid_div_traps=true`, traps are no longer emitted for `div`
instructions.
* The `udiv`/`urem` instructions now list their trap as divide-by-zero
instead of integer overflow.
* The lowering for `sdiv` was updated to still explicitly check for zero
but the integer overflow case is deferred to the instruction itself.
* The lowering of `srem` no longer checks for zero and the listed trap
for the `div` instruction is a divide-by-zero.
This means that the codegen for `udiv` and `urem` no longer have any
branches. The codegen for `sdiv` removes one branch but keeps the
zero-check to differentiate the two kinds of traps. The codegen for
`srem` removes one branch but keeps the -1 check since the semantics of
`srem` mismatch with the semantics of `idiv` with a -1 divisor
(specifically for INT_MIN).
This is unlikely to have really all that much of a speedup but was
something I noticed during #6008 which seemed like it'd be good to clean
up. Plus Wasmtime's signal handling was already set up to catch
`SIGFPE`, it was just never firing.
* Remove the `avoid_div_traps` cranelift setting
With no known users currently removing this should be possible and helps
simplify the x64 backend.
* x64: GC more support for avoid_div_traps
Remove the `validate_sdiv_divisor*` pseudo-instructions and clean up
some of the ISLE rules now that `div` is allowed to itself trap
unconditionally.
* x64: Store div trap code in instruction itself
* Keep divisors in registers, not in memory
Don't accidentally fold multiple traps together
* Handle EXC_ARITHMETIC on macos
* Update emit tests
* Update winch and tests
This commit goes through the lowerings for the CLIF `splat` instruction
and improves the support for each operator. Many of these lowerings are
mirrored from v8/SpiderMonkey and there are a number of improvements:
* AVX2 `v{p,}broadcast*` instructions are added and used when available.
* Float-based splats are much simpler and always a single-instruction
* Integer-based splats don't insert into an uninit xmm value and instead
start out with a `movd` to move into an `xmm` register. This
thoeretically breaks dependencies with prior instructions since `movd`
creates a fresh new value in the destination register.
* Loads are now sunk into all of the instructions. A new extractor,
`sinkable_load_exact`, was added to sink the i8/i16 loads.
This commit adds another case for `shuffle` lowering to the x64 backend
for the `{,v}pblendw` instruction. This instruction selects 16-bit
values from either of the inputs corresponding to an immediate 8-bit-mask where
each bit selects the corresponding lane from the inputs.
* x64: Refactor `Amode` computation in ISLE
This commit replaces the previous computation of `Amode` with a
different set of rules that are intended to achieve the same purpose but
are structured differently. The motivation for this commit is going to
become more relevant in the next commit where `lea` will be used for the
`iadd` instruction, possibly, on x64. When doing so it caused a stack
overflow in the test suite during the compilation phase of a wasm
module, namely as part of the `amode_add` function. This function is
recursively defined in terms of itself and recurses as deep as the
deepest `iadd`-chain in a program. A particular test in our test suite
has a 10k-long chain of `iadd` which ended up causing a stack overflow
in debug mode.
This stack overflow is caused because the `amode_add` helper in ISLE
unconditionally peels all the `iadd` nodes away and looks at all of
them, even if most end up in intermediate registers along the way. Given
that structure I couldn't find a way to easily abort the recursion. The
new `to_amode` helper is structured in a similar fashion but attempts to
instead only recurse far enough to fold items into the final `Amode`
instead of recursing through items which themselves don't end up in the
`Amode`. Put another way previously the `amode_add` helper might emit
`x64_add` instructions, but it no longer does that.
This goal of this commit is to preserve all the original `Amode`
optimizations, however. For some parts, though, it relies more on egraph
optimizations to run since if an `iadd` is 10k deep it doesn't try to
find a constant buried 9k levels inside there to fold into the `Amode`.
The hope, though, is that with egraphs having run already it's shuffled
constants to the right most of the time and already folded any possible
together.
* x64: Add `lea`-based lowering for `iadd`
This commit adds a rule for the lowering of `iadd` to use `lea` for 32
and 64-bit addition. The theoretical benefit of `lea` over the `add`
instruction is that the `lea` variant can emulate a 3-operand
instruction which doesn't destructively modify on of its operands.
Additionally the `lea` operation can fold in other components such as
constant additions and shifts.
In practice, however, if `lea` is unconditionally used instead of `iadd`
it ends up losing 10% performance on a local `meshoptimizer` benchmark.
My best guess as to what's going on here is that my CPU's dedicated
units for address computation are all overloaded while the ALUs are
basically idle in a memory-intensive loop. Previously when the ALU was
used for `add` and the address units for stores/loads it in theory
pipelined things better (most of this is me shooting in the dark). To
prevent the performance loss here I've updated the lowering of `iadd` to
conditionally sometimes use `lea` and sometimes use `add` depending on
how "complicated" the `Amode` is. Simple ones like `a + b` or `a + $imm`
continue to use `add` (and its subsequent hypothetical extra `mov`
necessary into the result). More complicated ones like `a + b + $imm` or
`a + b << c + $imm` use `lea` as it can remove the need for extra
instructions. Locally at least this fixes the performance loss relative
to unconditionally using `lea`.
One note is that this adds an `OperandSize` argument to the
`MInst::LoadEffectiveAddress` variant to add an encoding for 32-bit
`lea` in addition to the preexisting 64-bit encoding.
* Conditionally use `lea` based on regalloc
* x64: Add precise-output tests for div traps
This adds a suite of `*.clif` files which are intended to test the
`avoid_div_traps=true` compilation of the `{s,u}{div,rem}` instructions.
* x64: Remove conditional regalloc in `Div` instruction
Move the 8-bit `Div` logic into a dedicated `Div8` instruction to avoid
having conditionally-used registers with respect to regalloc.
* x64: Migrate non-trapping, `udiv`/`urem` to ISLE
* x64: Port checked `udiv` to ISLE
* x64: Migrate urem entirely to ISLE
* x64: Use `test` instead of `cmp` to compare-to-zero
* x64: Port `sdiv` lowering to ISLE
* x64: Port `srem` lowering to ISLE
* Tidy up regalloc behavior and fix tests
* Update docs and winch
* Review comments
* Reword again
* More refactoring test fixes
* More test fixes
* x64: Improve memory support in `{insert,extract}lane`
This commit improves adds support to Cranelift to emit `pextr{b,w,d,q}`
with a memory destination, merging a store-of-extract operation into one
instruction. Additionally AVX support is added for the `pextr*`
instructions.
I've additionally tried to ensure that codegen tests and runtests exist
for all forms of these instructions too.
* Add missing commas
* Fix tests
* x64: Add a smattering of lowerings for `shuffle` specializations (#5930)
* x64: Add lowerings for `punpck{h,l}wd`
Add some special cases for `shuffle` for more specialized x86
instructions.
* x64: Add `shuffle` lowerings for `pshufd`
This commit adds special-cased lowerings for the x64 `shuffle`
instruction when the `pshufd` instruction alone is necessary. This is
possible when the shuffle immediate permutes 32-bit values within one of
the vector inputs of the `shuffle` instruction, but not both.
* x64: Add shuffle lowerings for `punpck{h,l}{q,}dq`
This adds specific permutations for some x86 instructions which
specifically interleave high/low bytes for 32 and 64-bit values. This
corresponds to the preexisting specific lowerings for interleaving 8 and
16-bit values.
* x64: Add `shuffle` lowerings for `shufps`
This commit adds targeted lowerings for the `shuffle` instruction that
match the pattern that `shufps` supports. The `shufps` instruction
selects two elements from the first vector and two elements from the
second vector which means while it's not generally applicable it should
still be more useful than the catch-all lowering of `shuffle`.
* x64: Add shuffle support for `pshuf{l,h}w`
This commit adds special lowering cases for these instructions which
permute 16-bit values within a 128-bit value either within the upper or
lower half of the 128-bit value.
* x64: Specialize `shuffle` with an all-zeros immediate
Instead of loading the all-zeros immediate from a rip-relative address
at the end of the function instead generate a zero with a `pxor`
instruction and then use `pshufb` to do the broadcast.
* Review comments
* x64: Add an AVX encoding for the `pshufd` instruction
This will benefit from lack of need for alignment vs the `pshufd`
instruction if working with a memory operand and additionally, as I've
just learned, this reduces dependencies between instructions because the
`v*` instructions zero the upper bits as opposed to preserving them
which could accidentally create false dependencies in the CPU between
instructions.
* x64: Add more support for AVX loads/stores
This commit adds VEX-encoded versions of instructions such as
`mov{ss,sd,upd,ups,dqu}` for load and store operations. This also
changes some signatures so the `load` helpers specifically take a
`SyntheticAmode` argument which ended up doing a small refactoring of
the `*_regmove` variant used for `insertlane 0` into f64x2 vectors.
* x64: Enable using AVX instructions for zero regs
This commit refactors the internal ISLE helpers for creating zero'd
xmm registers to leverage the AVX support for all other instructions.
This moves away from picking opcodes to instead picking instructions
with a bit of reorganization.
* x64: Remove `XmmConstOp` as an instruction
All existing users can be replaced with usage of the `xmm_uninit_value`
helper instruction so there's no longer any need for these otherwise
constant operations. This additionally reduces manual usage of opcodes
in favor of instruction helpers.
* Review comments
* Update test expectations
* x64: Add lowerings for `punpck{h,l}wd`
Add some special cases for `shuffle` for more specialized x86
instructions.
* x64: Add `shuffle` lowerings for `pshufd`
This commit adds special-cased lowerings for the x64 `shuffle`
instruction when the `pshufd` instruction alone is necessary. This is
possible when the shuffle immediate permutes 32-bit values within one of
the vector inputs of the `shuffle` instruction, but not both.
* x64: Add shuffle lowerings for `punpck{h,l}{q,}dq`
This adds specific permutations for some x86 instructions which
specifically interleave high/low bytes for 32 and 64-bit values. This
corresponds to the preexisting specific lowerings for interleaving 8 and
16-bit values.
* x64: Add `shuffle` lowerings for `shufps`
This commit adds targeted lowerings for the `shuffle` instruction that
match the pattern that `shufps` supports. The `shufps` instruction
selects two elements from the first vector and two elements from the
second vector which means while it's not generally applicable it should
still be more useful than the catch-all lowering of `shuffle`.
* x64: Add shuffle support for `pshuf{l,h}w`
This commit adds special lowering cases for these instructions which
permute 16-bit values within a 128-bit value either within the upper or
lower half of the 128-bit value.
* x64: Specialize `shuffle` with an all-zeros immediate
Instead of loading the all-zeros immediate from a rip-relative address
at the end of the function instead generate a zero with a `pxor`
instruction and then use `pshufb` to do the broadcast.
* Review comments
This commit adds support for the bare lowering of the `iadd_pairwise`
instruction with `i16x8` and `i32x4` types on the x64 backend. These
lowerings are achieved with the `phaddw` and `phaddd` instructions,
respectively. Additionally AVX encodings of these instructions are added
too.
The motivation for these new lowerings comes from the relaxed-simd
proposal which will use them in the deterministic lowering of some
instructions on the x64 backend.
This uses the `cmov`, which was previously necessary for Spectre
mitigation, to clamp the table index instead of zeroing it. By then
placing the default target as the last entry in the table, we can use
just one branch instruction in all cases.
Since there isn't a bounds-check branch any more, this sequence no
longer needs Spectre mitigation. And since we don't need to be careful
about preserving flags, half the instructions can be removed from this
pseudoinstruction and emitted as regular instructions instead.
This is a net savings of three bytes in the encoding of x64's br_table
pseudoinstruction. The generated code can sometimes be longer overall
because the blocks are emitted in a slightly different order.
My benchmark results show a very small effect on runtime performance
with this change.
The spidermonkey benchmark in Sightglass runs "1.01x faster" than main
by instructions retired, but with no significant difference in CPU
cycles. I think that means it rarely hit the default case in any
br_table instructions it executed.
The pulldown-cmark benchmark in Sightglass runs "1.01x faster" than main
by CPU cycles, but main runs "1.00x faster" by instructions retired. I
think that means this benchmark hit the default case a significant
amount of the time, so it executes a few more instructions per br_table,
but maybe the branches were predicted better.
* x64: Fill out more AVX instructions
This commit fills out more AVX instructions for SSE counterparts
currently used. Many of these instructions do not benefit from the
3-operand form that AVX uses but instead benefit from being able to use
`XmmMem` instead of `XmmMemAligned` which may be able to avoid some
extra temporary registers in some cases.
* Review comments
The relaxed-simd proposal for WebAssembly adds a fused-multiply-add
operation for `v128` types so I was poking around at Cranelift's
existing support for its `fma` instruction. I was also poking around at
the x86_64 ISA's offerings for the FMA operation and ended up with this
PR that improves the lowering of the `fma` instruction on the x64
backend in a number of ways:
* A libcall-based fallback is now provided for `f32x4` and `f64x2` types
in preparation for eventual support of the relaxed-simd proposal.
These encodings are horribly slow, but it's expected that if FMA
semantics must be guaranteed then it's the best that can be done
without the `fma` feature. Otherwise it'll be up to producers (e.g.
Wasmtime embedders) whether wasm-level FMA operations should be FMA or
multiply-then-add.
* In addition to the existing `vfmadd213*` instructions opcodes were
added for `vfmadd132*`. The `132` variant is selected based on which
argument can have a sinkable load.
* Any argument in the `fma` CLIF instruction can now have a
`sinkable_load` and it'll generate a single FMA instruction.
* All `vfnmadd*` opcodes were added as well. These are pattern-matched
where one of the arguments to the CLIF instruction is an `fneg`. I
opted to not add a new CLIF instruction here since it seemed like
pattern matching was easy enough but I'm also not intimately familiar
with the semantics here so if that's the preferred approach I can do
that too.
* x64: Enable load-coalescing for SSE/AVX instructions
This commit unlocks the ability to fold loads into operands of SSE and
AVX instructions. This is beneficial for both function size when it
happens in addition to being able to reduce register pressure.
Previously this was not done because most SSE instructions require
memory to be aligned. AVX instructions, however, do not have alignment
requirements.
The solution implemented here is one recommended by Chris which is to
add a new `XmmMemAligned` newtype wrapper around `XmmMem`. All SSE
instructions are now annotated as requiring an `XmmMemAligned` operand
except for a new new instruction styles used specifically for
instructions that don't require alignment (e.g. `movdqu`, `*sd`, and
`*ss` instructions). All existing instruction helpers continue to take
`XmmMem`, however. This way if an AVX lowering is chosen it can be used
as-is. If an SSE lowering is chosen, however, then an automatic
conversion from `XmmMem` to `XmmMemAligned` kicks in. This automatic
conversion only fails for unaligned addresses in which case a load
instruction is emitted and the operand becomes a temporary register
instead. A number of prior `Xmm` arguments have now been converted to
`XmmMem` as well.
One change from this commit is that loading an unaligned operand for an
SSE instruction previously would use the "correct type" of load, e.g.
`movups` for f32x4 or `movup` for f64x2, but now the loading happens in
a context without type information so the `movdqu` instruction is
generated. According to [this stack overflow question][question] it
looks like modern processors won't penalize this "wrong" choice of type
when the operand is then used for f32 or f64 oriented instructions.
Finally this commit improves some reuse of logic in the `put_in_*_mem*`
helper to share code with `sinkable_load` and avoid duplication. With
this in place some various ISLE rules have been updated as well.
In the tests it can be seen that AVX-instructions are now automatically
load-coalesced and use memory operands in a few cases.
[question]: https://stackoverflow.com/questions/40854819/is-there-any-situation-where-using-movdqu-and-movupd-is-better-than-movups
* Fix tests
* Fix move-and-extend to be unaligned
These don't have alignment requirements like other xmm instructions as
well. Additionally add some ISA tests to ensure that their output is
tested.
* Review comments
This is a follow-up to comments in #5795 to remove some cruft in the x64
instruction model to ensure that the shape of an `Inst` reflects what's
going to happen in regalloc and encoding. This accessor was used to
handle `round*`, `pextr*`, and `pshufb` instructions. The `round*` ones
had already moved to the appropriate `XmmUnary*` variant and `pshufb`
was additionally moved over to that variant as well.
The `pextr*` instructions got a new `Inst` variant and additionally had
their constructors slightly modified to no longer require the type as
input. The encoding for these instructions now automatically handles the
various type-related operands through a new `SseOpcode::Pextrq` operand
to represent 64-bit movements.
* x64: Add most remaining AVX lowerings
This commit goes through `inst.isle` and adds a corresponding AVX
lowering for most SSE lowerings. I opted to skip instructions where the
SSE lowering didn't read/modify a register, such as `roundps`. I think
that AVX will benefit these instructions when there's load-merging since
AVX doesn't require alignment, but I've deferred that work to a future
PR.
Otherwise though in this PR I think all (or almost all) of the 3-operand
forms of AVX instructions are supported with their SSE counterparts.
This should ideally improve codegen slightly by removing register
pressure and the need for `movdqa` between registers. I've attempted to
ensure that there's at least one codegen test for all the new instructions.
As a side note, the recent capstone integration into `precise-output`
tests helped me catch a number of encoding bugs much earlier than
otherwise, so I've found that incredibly useful in tests!
* Move `vpinsr*` instructions to their own variant
Use true `XmmMem` and `GprMem` types in the instruction as well to get
more type-level safety for what goes where.
* Remove `Inst::produces_const` accessor
Instead of conditionally defining regalloc and various other operations
instead add dedicated `MInst` variants for operations which are intended
to produce a constant to have more clear interactions with regalloc and
printing and such.
* Fix tests
* Register traps in `MachBuffer` for load-folding ops
This adds a missing `add_trap` to encoding of VEX instructions with
memory operands to ensure that if they cause a segfault that there's
appropriate metadata for Wasmtime to understand that the instruction
could in fact trap. This fixes a fuzz test case found locally where v8
trapped and Wasmtime didn't catch the signal and crashed the fuzzer.
* x64: Add rudimentary support for some AVX instructions
I was poking around Spidermonkey's wasm backend and saw that the various
assembler functions used are all `v*`-prefixed which look like they're
intended for use with AVX instructions. I looked at Cranelift and it
currently doesn't have support for many AVX-based instructions, so I
figured I'd take a crack at it!
The support added here is a bit of a mishmash when viewed alone, but my
general goal was to take a single instruction from the SIMD proposal for
WebAssembly and migrate all of its component instructions to AVX. I, by
random chance, picked a pretty complicated instruction of `f32x4.min`.
This wasm instruction is implemented on x64 with 4 unique SSE
instructions and ended up being a pretty good candidate.
Further digging about AVX-vs-SSE shows that there should be two major
benefits to using AVX over SSE:
* Primarily AVX instructions largely use a three-operand form where two
input registers are operated with and an output register is also
specified. This is in contrast to SSE's predominant
one-register-is-input-but-also-output pattern. This should help free
up the register allocator a bit and additionally remove the need for
movement between registers.
* As #4767 notes the memory-based operations of VEX-encoded instructions
(aka AVX instructions) do not have strict alignment requirements which
means we would be able to sink loads and stores into individual
instructions instead of having separate instructions.
So I set out on my journey to implement the instructions used by
`f32x4.min`. The first few were fairly easy. The machinst backends are
already of the shape "take these inputs and compute the output" where
the x86 requirement of a register being both input and output is
postprocessed in. This means that the `inst.isle` creation helpers for
SSE instructions were already of the correct form to use AVX. I chose to
add new `rule` branches for the instruction creation helpers, for
example `x64_andnps`. The new `rule` conditionally only runs if AVX is
enabled and emits an AVX instruction instead of an SSE instruction for
achieving the same goal. This means that no lowerings of clif
instructions were modified, instead just new instructions are being
generated.
The VEX encoding was previously not heavily used in Cranelift. The only
current user are the FMA-style instructions that Cranelift has at this
time. These FMA instructions have one extra operand than `vandnps`, for
example, so I split the existing `XmmRmRVex` into a few more variants to
fit the shape of the instructions that needed generating for
`f32x4.min`. This was accompanied then with more AVX opcode definitions,
more emission support, etc.
Upon implementing all of this it turned out that the test suite was
failing on my machine due to the memory-operand encodings of VEX
instructions not being supported. I didn't explicitly add those in
myself but some preexisting RIP-relative addressing was leaking into the
new instructions with existing tests. I opted to go ahead and fill out
the memory addressing modes of VEX encoding to get the tests passing
again.
All-in-all this PR adds new instructions to the x64 backend for a number
of AVX instructions, updates 5 existing instruction producers to use AVX
instructions conditionally, implements VEX memory operands, and adds
some simple tests for the new output of `f32x4.min`. The existing
runtest for `f32x.min` caught a few intermediate bugs along the way and
I additionally added a plain `target x86_64` to that runtest to ensure
that it executes with and without AVX to test the various lowerings.
I'll also note that this, and future support, should be well-fuzzed
through Wasmtime's fuzzing which may explicitly disable AVX support
despite the machine having access to AVX, so non-AVX lowerings should be
well-tested into the future.
It's also worth mentioning that I am not an AVX or VEX or x64 expert.
Implementing the memory operand part for VEX was the hardest part of
this PR and while I think it should be good someone else should
definitely double-check me. Additionally I haven't added many
instructions to the x64 backend yet so I may have missed obvious places
to tests or such, so am happy to follow-up with anything to be more
thorough if necessary.
Finally I should note that this is just the tip of the iceberg when it
comes to AVX. My hope is to get some of the idioms sorted out to make it
easier for future PRs to add one-off instruction lowerings or such.
* Review feedback
This change adds support for immediate to memory moves in x64 which
are needed by Winch for zeroing local slots.
This change follows the guideline in `isa/x64/inst/emit` and uses
other instructions (immediate to register moves) as a base for the
test cases.
The instruction encoding expectation was derived by assembling each
instruction and inspecting the assembly with `objdump`.
Introduce a temporary for an intermediate value in the lowering of div in the x64 backend. Additionally, add a src argument to the shift_r smart constructor, which is why the diff got larger than just the div lowering.
* Turn off probestack by default in Cranelift
The probestack feature is not implemented for the aarch64 and s390x
backends and currently the on-by-default status requires the aarch64 and
s390x implementations to be a stub. Turning off probestack by default
allows the s390x and aarch64 backends to panic with an error message to
avoid providing a false sense of security. When the probestack option is
implemented for all backends, however, it may be reasonable to
re-enable.
* aarch64: Improve codegen for AMode fallback
Currently the final fallback for finalizing an `AMode` will generate
both a constant-loading instruction as well as an `add` instruction to
the base register into the same temporary. This commit improves the
codegen by removing the `add` instruction and folding the final add into
the finalized `AMode`. This changes the `extendop` used but both
registers are 64-bit so shouldn't be affected by the extending
operation.
* aarch64: Implement inline stack probes
This commit implements inline stack probes for the aarch64 backend in
Cranelift. The support here is modeled after the x64 support where
unrolled probes are used up to a particular threshold after which a loop
is generated. The instructions here are similar in spirit to x64 except
that unlike x64 the stack pointer isn't modified during the unrolled
loop to avoid needing to re-adjust it back up at the end of the loop.
* Enable inline probestack for AArch64 and Riscv64
This commit enables inline probestacks for the AArch64 and Riscv64
architectures in the same manner that x86_64 has it enabled now. Some
more testing was additionally added since on Unix platforms we should be
guaranteed that Rust's stack overflow message is now printed too.
* Enable probestack for aarch64 in cranelift-fuzzgen
* Address review comments
* Remove implicit stack overflow traps from x64 backend
This commit removes implicit `StackOverflow` traps inserted by the x64
backend for stack-based operations. This was historically required when
stack overflow was detected with page faults but Wasmtime no longer
requires that since it's not suitable for wasm modules which call host
functions. Additionally no other backend implements this form of
implicit trap-code additions so this is intended to synchronize the
behavior of all the backends.
This fixes a test added prior for aarch64 to properly abort the process
instead of accidentally being caught by Wasmtime.
* Fix a style issue
Avoid naming %rcx as written by the CoffTlsGetAddr pseudo-instruction in the x64 backend, and instead emit a fixed-def constraint for a fresh VReg and %rcx.
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
This is a cherry-pick of a long-ago commit, 2d46637. The original
message reads:
> Now that `SyntheticAmode` can refer to constants, there is no longer a
> need for a separate instruction format--standard load instructions will
> work.
Since then, the transition to ISLE and the use of `XmmLoadConst` in many
more places makes this change a larger diff than the original. The basic
idea is the same, though: the extra indirection of `Inst::XMmLoadConst`
is removed and replaced by a direct use of `VCodeConstant` as a
`SyntheticAmode`. This has no effect on codegen, but the CLIF output is
now clearer in that the actual instruction is displayed (e.g., `movdqu`)
instead of a made-up instruction (`load_const`).
This slipped through the regalloc2 operand code update in #4811: the
CvtFloatToUintSeq pseudo-instruction actually clobbers its source. It
was marked as a "mod" operand in the original and I mistakenly
converted it to a "use" as I had not seen the actual clobber. The
instruction now takes an extra temp and makes a copy of `src` in the
appropriate place.
Fixes#4840.
Add a new pseudo-instruction, XmmUnaryRmRImm, to handle instructions like roundss that only use their first register argument for the instruction's result. This has the added benefit of allowing the isle wrappers for those instructions to take an XmmMem argument, allowing for more cases where loads may be merged.
* x64: clean up regalloc-related semantics on several instructions.
This PR removes all uses of "modify" operands on instructions in the x64
backend, and also removes all uses of "pinned vregs", or vregs that are
explicitly tied to particular physical registers. In place of both of
these mechanisms, which are legacies of the old regalloc design and
supported via compatibility code, the backend now uses operand
constraints. This is more flexible as it allows the regalloc to see the
liveranges and constraints without "reverse-engineering" move instructions.
Eventually, after removing all such uses (including in other backends
and by the ABI code), we can remove the compatibility code in regalloc2,
significantly simplifying its liverange-construction frontend and
thus allowing for higher confidence in correctness as well as possibly a
bit more compilation speed.
Curiously, there are a few extra move instructions now; they are likely
poor splitting decisions and I can try to chase these down later.
* Fix cranelift-codegen tests.
* Review feedback.
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
* x64: Add VEX Instruction Encoder
This uses a similar builder pattern to the EVEX Encoder.
Does not yet support memory accesses.
* x64: Add FMA Flag
* x64: Implement SIMD `fma`
* x64: Use 4 register Vex Inst
* x64: Reorder VEX pretty print args
* x64: port `atomic_rmw` to ISLE
This change ports `atomic_rmw` to ISLE for the x64 backend. It does not
change the lowering in any way, though it seems possible that the fixed
regs need not be as fixed and that there are opportunities for single
instruction lowerings. It does rename `inst_common::AtomicRmwOp` to
`MachAtomicRmwOp` to disambiguate with the IR enum with the same name.
* x64: remove remaining hardcoded register constraints for `atomic_rmw`
* x64: use `SyntheticAmode` in `AtomicRmwSeq`
* review: add missing reg collector for amode
* review: collect memory registers in the 'late' phase
- Handle call instructions' clobbers with the clobbers API, using RA2's
clobbers bitmask (bytecodealliance/regalloc2#58) rather than clobbers
list;
- Pull in changes from bytecodealliance/regalloc2#59 for much more sane
edge-case behavior w.r.t. liverange splitting.
