To keep cross-compiling straightforward, Cretonne shouldn't have any
behavior that depends on the host. This renames the "Native" calling
convention to "SystemV", which has a defined meaning for each target,
so that it's clear that the calling convention doesn't change
depending on what host Cretonne is running on.
* Add a pre-opt optimization to change constants into immediates.
This converts 'iadd' + 'iconst' into 'iadd_imm', and so on.
* Optimize away redundant `bint` instructions.
Cretonne has a concept of "Testable" values, which can be either boolean
or integer. When the an instruction needing a "Testable" value receives
the result of a `bint`, converting boolean to integer, eliminate the
`bint`, as it's redundant.
* Postopt: Optimize using CPU flags.
This introduces a post-legalization optimization pass which converts
compare+branch sequences to use flags values on CPUs which support it.
* Define a form of x86's `urm` that doesn't clobber FLAGS.
movzbl/movsbl/etc. don't clobber FLAGS; define a form of the `urm`
recipe that represents this.
* Implement a DCE pass.
This pass deletes instructions with no side effects and no results that
are used.
* Clarify ambiguity about "32-bit" and "64-bit" in comments.
* Add x86 encodings for icmp_imm.
* Add a testcase for postopt CPU flags optimization.
This covers the basic functionality of transforming compare+branch
sequences to use CPU flags.
* Pattern-match irsub_imm in preopt.
* First draft of TrapSink implementation.
* Add trap sink calls to 'trapif' and 'trapff' recipes.
* Add SourceLoc to trap sink calls, and add trap sink calls to all loads and stores.
* Add IntegerDivisionByZero trap to div recipe.
* Only emit load/store traps if 'notrap' flag is not set on the instruction.
* Update filetest machinery to add new trap sink functionality.
* Update filetests to include traps in output.
* Add a few more trap outputs to filetests.
* Add trap output to CLI tool.
While the specifics of these terms are debatable, "IR" generally
isn't incorrect in this context, and is the more widely recognized
term at this time.
See also the discussion in #267.
Fixes#267.
Value aliases aren't instructions, so they don't have a location in the
CFG, so it's not meaningful to query whether a value alias is defined
within a loop.
While there may be CPUs that have a domain crossing penalty here,
this also helps the generated code look more like the code produced
by other compilers.
EFLAGS is a subregister of RFLAGS. For consistency with GPRs where we
use the 64-bit names to refer to the registers, use the 64-bit name for
RFLAGS as well.
Mark loads from globals generated by cton_wasm or by legalization as
`aligned` and `notrap`, since memory for these globals should be
allocated by the runtime environment for that purpose. This reduces
the number of potentially trapping instructions, which can reduce
the amount of metadata required by embedding environments.
* add x86 encodings for shift-immediate instructions
implements encodings for ishl_imm, sshr_imm, and ushr_imm. uses 8-bit immediates.
added tests for the encodings to intel/binary64.cton. Canonical versions
come from llvm-mc.
* translate test to use shift-immediates
* shift immediate encodings: use enc_i32_i64
and note why the regular shift encodings cant use it above
* add additional encoding tests for shift immediates
this covers 32 bit mode, and 64 bit operations in 64 bit mode.
* cton-util: fix some clippy unnecessary pass-by-value warnings
* clippy: ignore too many arguments / cyclomatic complexity in module
since these functions are taking args coming from the command line, i
dont think this is actually a valid lint, morally the arguments are all
from one structure
* cton-util: take care of remaining clippy warnings
* cton-reader: fix all non-suspicious clippy warnings
* cton-reader: disable clippy at site of suspicious lint
* cton-frontend: disable clippy at the site of an invalid lint
* cton-frontend: fix clippy warnings, or ignore benign ones
* clippy: ignore the camelcase word WebAssembly in docs
* cton-wasm: fix clippy complaints or ignore benign ones
* cton-wasm tests: fix clippy complaints
* cretonne: starting point turns off all clippy warnings
* cretonne: clippy fixes, or lower allow() to source of problem
* cretonne: more clippy fixes
* cretonne: fix or disable needless_lifetimes lint
this linter is buggy when the declared lifetime is used for another type
constraint.
* cretonne: fix clippy complaint about Pass::NoPass
* rustfmt
* fix prev minor api changes clippy suggested
* add clippy to test-all
* cton-filetests: clippy fixes
* simplify clippy reporting in test-all
* cretonne: document clippy allows better
* cretonne: fix some more clippy lints
* cretonne: fix clippy lints (mostly doc comments)
* cretonne: allow all needless_lifetimes clippy warnings
remove overrides at the false positives
* rustfmt
This allows us to run the tests via a library call rather than just
as a command execution. And, it's a step toward a broader goal, which
is to keep the code in the top-level src directory minimal, with
important functionality exposed as crates.
Refactor the filetests harness so that it can be run as part of
`cargo test`. And begin reorganizing the test harness code in preparation
for moving it out of the src directory.
- Test subcommand files are now named `test_*.rs`.
- cton-util subcommand files now just export their `run` and nothing else.
- src/filetest/mod.rs now also just exports `run` and nothing else.
- Tests are now run in release mode (with debug assertions enabled).
Cretonne's python scripts aren't run very often, so there's little
benefit in creating .pyc files. And the .pyc files cause trouble for
some vendoring scripts. So disable them.
Emergency stack slots are a new kind of stack slot added relatively
recently. They need to be allocated a stack offset just like explicit
and spill slots.
Also, make StackSlotData's offset field an Option, to catch problems
like this in the future. Previously the value 0 was used when offsets
weren't assigned yet, however that made it non-obvious when the field
meant "not assigned yet" and when it meant "assigned the value 0".
The term "local variables" predated the SSA builder in the front-end
crate, which also provides a way to implement source-language local
variables. The name "explicit stack slot" makes it clear what this
construct is.
Adds support for transforming integer division and remainder by constants
into sequences that do not involve division instructions.
* div/rem by constant powers of two are turned into right shifts, plus some
fixups for the signed cases.
* div/rem by constant non-powers of two are turned into double length
multiplies by a magic constant, plus some fixups involving shifts,
addition and subtraction, that depends on the constant, the word size and
the signedness involved.
* The following cases are transformed: div and rem, signed or unsigned, 32
or 64 bit. The only un-transformed cases are: unsigned div and rem by
zero, signed div and rem by zero or -1.
* This is all incorporated within a new transformation pass, "preopt", in
lib/cretonne/src/preopt.rs.
* In preopt.rs, fn do_preopt() is the main driver. It is designed to be
extensible to transformations of other kinds of instructions. Currently
it merely uses a helper to identify div/rem transformation candidates and
another helper to perform the transformation.
* In preopt.rs, fn get_div_info() pattern matches to find candidates, both
cases where the second arg is an immediate, and cases where the second
arg is an identifier bound to an immediate at its definition point.
* In preopt.rs, fn do_divrem_transformation() does the heavy lifting of the
transformation proper. It in turn uses magic{S,U}{32,64} to calculate the
magic numbers required for the transformations.
* There are many test cases for the transformation proper:
filetests/preopt/div_by_const_non_power_of_2.cton
filetests/preopt/div_by_const_power_of_2.cton
filetests/preopt/rem_by_const_non_power_of_2.cton
filetests/preopt/rem_by_const_power_of_2.cton
filetests/preopt/div_by_const_indirect.cton
preopt.rs also contains a set of tests for magic number generation.
* The main (non-power-of-2) transformation requires instructions that return
the high word of a double-length multiply. For this, instructions umulhi
and smulhi have been added to the core instruction set. These will map
directly to single instructions on most non-intel targets.
* intel does not have an instruction exactly like that. For intel,
instructions x86_umulx and x86_smulx have been added. These map to real
instructions and return both result words. The intel legaliser will
rewrite {s,u}mulhi into x86_{s,u}mulx uses that throw away the lower half
word. Tests:
filetests/isa/intel/legalize-mulhi.cton (new file)
filetests/isa/intel/binary64.cton (added x86_{s,u}mulx encoding tests)
Maintain an explicit "reachable" flag when decoding wasm. Push placeholder
frames on the control-flow stack instead of just maintaining a count of
the stack depth in unreachable code, so that we can whether If blocks
have Elses, and whether block exits are branched to, in all contexts.
Fixes#217.
