This commit adds constant-propagation optimizations for
`splat`-of-constant to produce a `vconst` node. This should help later
hoisting these constants out of loops if it shows up in wasm.
I was playing around with souper recently on some wasms I had lying
around and these are some optimization opportunities that popped out
which seemed easy-enough to add to the egraph-based optimizations.
Also move these optimization rules to cprop.isle; it's where all the
other similar rules are.
Like the other cprop rules, these can subsume any other rules. We can't
do better than reducing an expression to a constant.
The new i64_sextend_imm64 and u64_uextend_imm64 constructors are useful
helpers to clean up other code. I applied them to `imm64_icmp` while I
was here, as well as using the existing `ty_mask` helper to clean up
`imm64_masked`.
* Fix optimization rules for narrow types: wrap i8 results to 8 bits.
This fixes#5405.
In the egraph mid-end's optimization rules, we were rewriting e.g. imuls
of two iconsts to an iconst of the result, but without masking off the
high bits (beyond the result type's width). This was producing iconsts
with set high bits beyond their types' width, which is not legal.
In addition, this PR adds some optimizations to the algebraic rules to
recognize e.g. `x == x` (and all other integer comparison operators) and
resolve to 1 or 0 as appropriate.
* Review feedback.
* Review feedback, again.
* Optimizations to egraph framework:
- Save elaborated results by canonical value, not latest value (union
value). Previously we were artificially skipping and re-elaborating
some values we already had because we were not finding them in the
map.
- Make some changes to handling of icmp results: when icmp became
I8-typed (when bools went away), many uses became `(uextend $I32 (icmp
$I8 ...))`, and so patterns in lowering backends were no longer
matching.
This PR includes an x64-specific change to match `(brz (uextend (icmp
...)))` and similarly for `brnz`, but it also takes advantage of the
ability to write rules easily in the egraph mid-end to rewrite selects
with icmp inputs appropriately.
- Extend constprop to understand selects in the egraph mid-end.
With these changes, bz2.wasm sees a ~1% speedup, and spidermonkey.wasm
with a fib.js input sees a 16.8% speedup:
```
$ time taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./spidermonkey.base.cwasm ./fib.js
1346269
taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./fib.js 2.14s user 0.01s system 99% cpu 2.148 total
$ time taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./spidermonkey.egraphs.cwasm ./fib.js
1346269
taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./fib.js 1.78s user 0.01s system 99% cpu 1.788 total
```
* Review feedback.
* egraph support: rewrite to work in terms of CLIF data structures.
This work rewrites the "egraph"-based optimization framework in
Cranelift to operate on aegraphs (acyclic egraphs) represented in the
CLIF itself rather than as a separate data structure to which and from
which we translate the CLIF.
The basic idea is to add a new kind of value, a "union", that is like an
alias but refers to two other values rather than one. This allows us to
represent an eclass of enodes (values) as a tree. The union node allows
for a value to have *multiple representations*: either constituent value
could be used, and (in well-formed CLIF produced by correct
optimization rules) they must be equivalent.
Like the old egraph infrastructure, we take advantage of acyclicity and
eager rule application to do optimization in a single pass. Like before,
we integrate GVN (during the optimization pass) and LICM (during
elaboration).
Unlike the old egraph infrastructure, everything stays in the
DataFlowGraph. "Pure" enodes are represented as instructions that have
values attached, but that are not placed into the function layout. When
entering "egraph" form, we remove them from the layout while optimizing.
When leaving "egraph" form, during elaboration, we can place an
instruction back into the layout the first time we elaborate the enode;
if we elaborate it more than once, we clone the instruction.
The implementation performs two passes overall:
- One, a forward pass in RPO (to see defs before uses), that (i) removes
"pure" instructions from the layout and (ii) optimizes as it goes. As
before, we eagerly optimize, so we form the entire union of optimized
forms of a value before we see any uses of that value. This lets us
rewrite uses to use the most "up-to-date" form of the value and
canonicalize and optimize that form.
The eager rewriting and acyclic representation make each other work
(we could not eagerly rewrite if there were cycles; and acyclicity
does not miss optimization opportunities only because the first time
we introduce a value, we immediately produce its "best" form). This
design choice is also what allows us to avoid the "parent pointers"
and fixpoint loop of traditional egraphs.
This forward optimization pass keeps a scoped hashmap to "intern"
nodes (thus performing GVN), and also interleaves on a per-instruction
level with alias analysis. The interleaving with alias analysis allows
alias analysis to see the most optimized form of each address (so it
can see equivalences), and allows the next value to see any
equivalences (reuses of loads or stored values) that alias analysis
uncovers.
- Two, a forward pass in domtree preorder, that "elaborates" pure enodes
back into the layout, possibly in multiple places if needed. This
tracks the loop nest and hoists nodes as needed, performing LICM as it
goes. Note that by doing this in forward order, we avoid the
"fixpoint" that traditional LICM needs: we hoist a def before its
uses, so when we place a node, we place it in the right place the
first time rather than moving later.
This PR replaces the old (a)egraph implementation. It removes both the
cranelift-egraph crate and the logic in cranelift-codegen that uses it.
On `spidermonkey.wasm` running a simple recursive Fibonacci
microbenchmark, this work shows 5.5% compile-time reduction and 7.7%
runtime improvement (speedup).
Most of this implementation was done in (very productive) pair
programming sessions with Jamey Sharp, thus:
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* Review feedback.
* Review feedback.
* Review feedback.
* Bugfix: cprop rule: `(x + k1) - k2` becomes `x - (k2 - k1)`, not `x - (k1 - k2)`.
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* egraph-based midend: draw the rest of the owl.
* Rename `egg` submodule of cranelift-codegen to `egraph`.
* Apply some feedback from @jsharp during code walkthrough.
* Remove recursion from find_best_node by doing a single pass.
Rather than recursively computing the lowest-cost node for a given
eclass and memoizing the answer at each eclass node, we can do a single
forward pass; because every eclass node refers only to earlier nodes,
this is sufficient. The behavior may slightly differ from the earlier
behavior because we cannot short-circuit costs to zero once a node is
elaborated; but in practice this should not matter.
* Make elaboration non-recursive.
Use an explicit stack instead (with `ElabStackEntry` entries,
alongside a result stack).
* Make elaboration traversal of the domtree non-recursive/stack-safe.
* Work analysis logic in Cranelift-side egraph glue into a general analysis framework in cranelift-egraph.
* Apply static recursion limit to rule application.
* Fix aarch64 wrt dynamic-vector support -- broken rebase.
* Topo-sort cranelift-egraph before cranelift-codegen in publish script, like the comment instructs me to!
* Fix multi-result call testcase.
* Include `cranelift-egraph` in `PUBLISHED_CRATES`.
* Fix atomic_rmw: not really a load.
* Remove now-unnecessary PartialOrd/Ord derivations.
* Address some code-review comments.
* Review feedback.
* Review feedback.
* No overlap in mid-end rules, because we are defining a multi-constructor.
* rustfmt
* Review feedback.
* Review feedback.
* Review feedback.
* Review feedback.
* Remove redundant `mut`.
* Add comment noting what rules can do.
* Review feedback.
* Clarify comment wording.
* Update `has_memory_fence_semantics`.
* Apply @jameysharp's improved loop-level computation.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion commit.
* Fix off-by-one in new loop-nest analysis.
* Review feedback.
* Review feedback.
* Review feedback.
* Use `Default`, not `std::default::Default`, as per @fitzgen
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Apply @fitzgen's comment elaboration to a doc-comment.
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add stat for hitting the rewrite-depth limit.
* Some code motion in split prelude to make the diff a little clearer wrt `main`.
* Take @jameysharp's suggested `try_into()` usage for blockparam indices.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Take @jameysharp's suggestion to avoid double-match on load op.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion (add import).
* Review feedback.
* Fix stack_load handling.
* Remove redundant can_store case.
* Take @jameysharp's suggested improvement to FuncEGraph::build() logic
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Tweaks to FuncEGraph::build() on top of suggestion.
* Take @jameysharp's suggested clarified condition
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Clean up after suggestion (unused variable).
* Fix loop analysis.
* loop level asserts
* Revert constant-space loop analysis -- edge cases were incorrect, so let's go with the simple thing for now.
* Take @jameysharp's suggestion re: result_tys
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix up after suggestion
* Take @jameysharp's suggestion to use fold rather than reduce
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fixup after suggestion
* Take @jameysharp's suggestion to remove elaborate_eclass_use's return value.
* Clarifying comment in terminator insts.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
