This will hopefully remove a small thorn in our side with periodic
nightly breakage due to nightly features changing. This commit moves
lightbeam to stable Rust, swapping out `staticvec` for `arrayvec` and
otherwise updating some dependencies (namely `dynasm`) to compile with
stable.
This then also updates CI appropriately to not use a pinned nightly and
instead us a floating `nightly` channel so we can head off any breakage
coming up ASAP.
I don't think this has happened in awhile but I've run a `cargo update`
as well as trimming some of the duplicate/older dependencies in
`Cargo.lock` by updating some of our immediate dependencies as well.
This commit updates `wasmtime::FuncType` to exactly store an internal
`WasmFuncType` from the cranelift crates. This allows us to remove a
translation layer when we are given a `FuncType` and want to get an
internal cranelift type out as a result.
The other major change from this commit was changing the constructor and
accessors of `FuncType` to be iterator-based instead of exposing
implementation details.
Currently the runtime needs to acquire the current stack pointer so it
can set a limit for where if the wasm stack goes below that point it
will abort the wasm code. Acquiring the stack pointer is done in a
brittle way right now which involves looking at the address of what we
hope is an on-stack structure. This turns out to not work at all with
ASan as well.
Instead this commit switches to the `psm` crate which is used by the
Rust compiler team for stack manipulation, namely a coarse version of
segmented stacks to avoid stack overflow in the compiler. We don't need
most of the implementation of `psm`, just the `stack_pointer` function,
but it shouldn't be a burden to bring in!
Closes#2344
After compilation there's actually no need to hold onto the native
signature for a wasm function type, so this commit moves out the
`ir::Signature` value from a `Module` into a separate field that's
deallocated when compilation is finished. This simplifies the
`SignatureRegistry` because it only needs to track wasm functino types
and it also means less work is done for `Func::wrap`.
The ModuleFrameInfo and FunctionInfo data structures maintain
a list of ranges via a BTreeMap. The key to that map is one
past the end of the module/function in question. This causes
a problem in the case of immediately adjacent ranges. For
example, if we have two functions occupying adjacent ranges:
A: 0-100
B: 100-200
function A is stored with a key of 100 and B with a key of 200.
Now, when looking up the function associated with address 100,
we'd expect to find B. However the current code:
let (end, func) = info.functions.range(pc..).next()?;
if pc < func.start || *end < pc {
will look up the value 100 in the map and return function A,
which will then fail the pc < func.start check in the next
line, so the result will be failure.
To fix this problem, make sure that the key used when
registering functions or modules is the address of the
last byte, not one past the end.
This patch implements, for aarch64, the following wasm SIMD extensions
i32x4.dot_i16x8_s instruction
https://github.com/WebAssembly/simd/pull/127
It also updates dependencies as follows, in order that the new instruction can
be parsed, decoded, etc:
wat to 1.0.27
wast to 26.0.1
wasmparser to 0.65.0
wasmprinter to 0.2.12
The changes are straightforward:
* new CLIF instruction `widening_pairwise_dot_product_s`
* translation from wasm into `widening_pairwise_dot_product_s`
* new AArch64 instructions `smull`, `smull2` (part of the `VecRRR` group)
* translation from `widening_pairwise_dot_product_s` to `smull ; smull2 ; addv`
There is no testcase in this commit, because that is a separate repo. The
implementation has been tested, nevertheless.
This commit reduces the size of `InstructionAddressMap` from 24 bytes to
8 bytes by dropping the `code_len` field and reducing `code_offset` to
`u32` instead of `usize`. The intention is to primarily make the
in-memory version take up less space, and the hunch is that the
`code_len` is largely not necessary since most entries in this map are
always adjacent to one another. The `code_len` field is now implied by
the `code_offset` field of the next entry in the map.
This isn't as big of an improvement to serialized module size as #2321
or #2322, primarily because of the switch to variable-length encoding.
Despite this though it shaves about 10MB off the encoded size of the
module from #2318
This fixes an issue where `ensure_inserted_block()` wasn't called before
we do some block manipulation in the Wasmtime translation of some
table-related instructions. It looks like `ensure_inserted_block()` is
otherwise called on most instructions being added, so we just need to
call it explicitly it seems here.
Closes#2347
This commit refactors where trampolines and signature information is
stored within a `Store`, namely moving them from
`wasmtime_runtime::Instance` instead to `Store` itself. The goal here is
to remove an allocation inside of an `Instance` and make them a bit
cheaper to create. Additionally this should open up future possibilities
like not creating duplicate trampolines for signatures already in the
`Store` when using `Func::new`.
This commit removes the binaryen support for fuzzing from wasmtime,
instead switching over to `wasm-smith`. In general it's great to have
what fuzzing we can, but our binaryen support suffers from a few issues:
* The Rust crate, binaryen-sys, seems largely unmaintained at this
point. While we could likely take ownership and/or send PRs to update
the crate it seems like the maintenance is largely on us at this point.
* Currently the binaryen-sys crate doesn't support fuzzing anything
beyond MVP wasm, but we're interested at least in features like bulk
memory and reference types. Additionally we'll also be interested in
features like module-linking. New features would require either
implementation work in binaryen or the binaryen-sys crate to support.
* We have 4-5 fuzz-bugs right now related to timeouts simply in
generating a module for wasmtime to fuzz. One investigation along
these lines in the past revealed a bug in binaryen itself, and in any
case these bugs would otherwise need to get investigated, reported,
and possibly fixed ourselves in upstream binaryen.
Overall I'm not sure at this point if maintaining binaryen fuzzing is
worth it with the advent of `wasm-smith` which has similar goals for
wasm module generation, but is much more readily maintainable on our
end.
Additonally in this commit I've added a fuzzer for wasm-smith's
`SwarmConfig`-based fuzzer which should expand the coverage of tested
modules.
Closes#2163
Added in c4e10227de I think the original
reason (which I'm not entirely knowledgeable of) may no longer be
applicable? In any case this is a significant difference on Windows from
other platforms because it makes loads/stores of wasm code have manual
checks instead of relying on the guard page, causing runtime and
compile-time slowdowns on Windows-only.
I originally rediscovered this when investigating #2318 and saw that
both the compile time of the module in question and trap information
tables were much larger than they were on Linux. Removing this
Windows-specific configuration fixed the discrepancies and afterwards
Linux and Windows were basically the same.
Turns out this wasn't needed anywhere! Additionally we can construct it
from `InstructionAddressMap` anyway. There's so many pieces of trap
information that it's best to keep these structures small as well.
This commit compresses `FunctionAddressMap` by performing a simple
coalescing of adjacent `InstructionAddressMap` descriptors if they
describe the same source location. This is intended to handle the common
case where a sequene of machine instructions describes a high-level wasm
instruction.
For the module on #2318 this reduces the cache entry size from 306MB to
161MB.
Update `Module::{serialize,deserialize}` to use variable-length integers
with `bincode` to make the output artifacts smaller. Locally this
reduces the size of #2318 from 160 to 110 MB, a 30% decrease in size!
Deserialization performance is slightly slower, but seemingly within the
range of noise locally for me.
Similar to other data structures owned by the `Store` there's no need
for `Instance` to have a strong `Arc` reference, instead it's sufficient
for `Store` to have the owning reference.
There's no need to name each export since each synthetic instance we're
creating only has one export, so let's use the empty string which
doesn't require any allocations.
Fixes RUSTSEC-2020-0054 warning from cargo-audit/cargo-deny, follows the recommendation to switch to the new maintained `directories-next` crate fork
Only affects the cache directory determination for the environment and was a simple search'n'replace to this fork so don't think behavior has changed.
https://rustsec.org/advisories/RUSTSEC-2020-0054
This commit adds initial (gated) support for the multi-memory wasm
proposal. This was actually quite easy since almost all of wasmtime
already expected multi-memory to be implemented one day. The only real
substantive change is the `memory.copy` intrinsic changes, which now
accounts for the source/destination memories possibly being different.
* normalise value prior to right shifts
by first left-aligning (shift left by 32 bits)
then shifting back (respecting signedness)
* Update crates/debug/src/transform/expression.rs
Co-authored-by: bjorn3 <bjorn3@users.noreply.github.com>
* Update crates/debug/src/transform/expression.rs
* Update crates/debug/src/transform/expression.rs
* update translation of DW_OP_shr in test
* add translation test for DW_OP_shra
* explain normalisation
* optimise the expression by performing only one right shift
We assume that the expression evaluator permits collapsing
two shifts as long as they go in the same direction.
Review feedback.
Co-authored-by: bjorn3 <bjorn3@users.noreply.github.com>
* Validate modules while translating
This commit is a change to cranelift-wasm to validate each function body
as it is translated. Additionally top-level module translation functions
will perform module validation. This commit builds on changes in
wasmparser to perform module validation interwtwined with parsing and
translation. This will be necessary for future wasm features such as
module linking where the type behind a function index, for example, can
be far away in another module. Additionally this also brings a nice
benefit where parsing the binary only happens once (instead of having an
up-front serial validation step) and validation can happen in parallel
for each function.
Most of the changes in this commit are plumbing to make sure everything
lines up right. The major functional change here is that module
compilation should be faster by validating in parallel (or skipping
function validation entirely in the case of a cache hit). Otherwise from
a user-facing perspective nothing should be that different.
This commit does mean that cranelift's translation now inherently
validates the input wasm module. This means that the Spidermonkey
integration of cranelift-wasm will also be validating the function as
it's being translated with cranelift. The associated PR for wasmparser
(bytecodealliance/wasmparser#62) provides the necessary tools to create
a `FuncValidator` for Gecko, but this is something I'll want careful
review for before landing!
* Read function operators until EOF
This way we can let the validator take care of any issues with
mismatched `end` instructions and/or trailing operators/bytes.
According to wasm's spec, nearest must do the following, for NaN inputs:
- when the input is a canonical NaN, return a canonical NaN;
- when the input is a non-canonical NaN, return an arithmetic NaN.
This patch adds checks when the exponent is all ones if the input was a
NaN, and will set the significand's most significant bit in that case.
It works both for canonical inputs (which already had the bit set) and
makes other NaN inputs canonical.
