This unifies the logic around Rex prefix emission and hopefully makes REX prefix errors less likely.
There are still several instructions that use other sources to determine the flags, so set_w and clear_w are left as is.
Additional cleanups:
* Change always_emit_if_8bit_needed to take a Reg instead of a u8 for type safety.
* Deduplicated emission code in MovRM.
- Panic messages must now be string literals (we used `format!()` in
many places; `panic!()` can take format strings directly).
- Some dead enum options with EVEX encoding stuff in old x86 backend.
This will go away soon and/or be moved to the new backend anyway, so
let's silence the warning for now.
- A few other misc warnings.
This is in preparation for refactoring all x64::Inst arms to use OperandSize.
Current uses of OperandSize fall into two categories:
1. XMM operations which require 32/64 bit operands
2. Immediates which only care about 64-bit or not.
Adds assertions to existing Inst constructors to check that they are passed valid sizes.
This change also removes the implicit widening of 1 and 2 byte values to 4 bytes. from_bytes() is only used by category 2, so removing this behavior will not change any visible behavior.
Overall this change should be a no-op.
* Remove some uses of riscv in tests
* Fix typo
* Apply suggestions from code review
* Apply suggestions from code review
Co-authored-by: Benjamin Bouvier <public@benj.me>
* Consume fuel during function execution
This commit adds codegen infrastructure necessary to instrument wasm
code to consume fuel as it executes. Currently nothing is really done
with the fuel, but that'll come in later commits.
The focus of this commit is to implement the codegen infrastructure
necessary to consume fuel and account for fuel consumed correctly.
* Periodically check remaining fuel in wasm JIT code
This commit enables wasm code to periodically check to see if fuel has
run out. When fuel runs out an intrinsic is called which can do what it
needs to do in the result of fuel running out. For now a trap is thrown
to have at least some semantics in synchronous stores, but another
planned use for this feature is for asynchronous stores to periodically
yield back to the host based on fuel running out.
Checks for remaining fuel happen in the same locations as interrupt
checks, which is to say the start of the function as well as loop
headers.
* Improve codegen by caching `*const VMInterrupts`
The location of the shared interrupt value and fuel value is through a
double-indirection on the vmctx (load through the vmctx and then load
through that pointer). The second pointer in this chain, however, never
changes, so we can alter codegen to account for this and remove some
extraneous load instructions and hopefully reduce some register
pressure even maybe.
* Add tests fuel can abort infinite loops
* More fuzzing with fuel
Use fuel to time out modules in addition to time, using fuzz input to
figure out which.
* Update docs on trapping instructions
* Fix doc links
* Fix a fuzz test
* Change setting fuel to adding fuel
* Fix a doc link
* Squelch some rustdoc warnings
1. Restricts max nop size to 15 instead of 16.
2. Fixes an edge case where gen_nop() would return a zero sized intruction on multiples of 16.
3. Clarifies the documentation of the gen_nop interface to state that returning zero is allowed when preferred_size is zero.
With `Module::{serialize,deserialize}` it should be possible to share
wasmtime modules across machines or CPUs. Serialization, however, embeds
a hash of all configuration values, including cranelift compilation
settings. By default wasmtime's selection of the native ISA would enable
ISA flags according to CPU features available on the host, but the same
CPU features may not be available across two machines.
This commit adds a `Config::cranelift_clear_cpu_flags` method which
allows clearing the target-specific ISA flags that are automatically
inferred by default for the native CPU. Options can then be
incrementally built back up as-desired with teh `cranelift_other_flag`
method.
cargo-deny tells us that we should upgrade raw-cpuid to v9.0.0. This
new version also seems to lack the `nightly` feature (perhaps it has
been incorporated into the base functionality) so I had to remove this
feature selector to build.
This PR propagates "value labels" all the way from CLIF to DWARF
metadata on the emitted machine code. The key idea is as follows:
- Translate value-label metadata on the input into "value_label"
pseudo-instructions when lowering into VCode. These
pseudo-instructions take a register as input, denote a value label,
and semantically are like a "move into value label" -- i.e., they
update the current value (as seen by debugging tools) of the given
local. These pseudo-instructions emit no machine code.
- Perform a dataflow analysis *at the machine-code level*, tracking
value-labels that propagate into registers and into [SP+constant]
stack storage. This is a forward dataflow fixpoint analysis where each
storage location can contain a *set* of value labels, and each value
label can reside in a *set* of storage locations. (Meet function is
pairwise intersection by storage location.)
This analysis traces value labels symbolically through loads and
stores and reg-to-reg moves, so it will naturally handle spills and
reloads without knowing anything special about them.
- When this analysis converges, we have, at each machine-code offset, a
mapping from value labels to some number of storage locations; for
each offset for each label, we choose the best location (prefer
registers). Note that we can choose any location, as the symbolic
dataflow analysis is sound and guarantees that the value at the
value_label instruction propagates to all of the named locations.
- Then we can convert this mapping into a format that the DWARF
generation code (wasmtime's debug crate) can use.
This PR also adds the new-backend variant to the gdb tests on CI.
This commit goes through the dependencies that wasmtime has and updates
versions where possible. This notably brings in a wasmparser/wast update
which has some simd spec changes with new instructions. Otherwise most
of these are just routine updates.
The StructReturn ABI is fairly simple at the codegen/isel level: we only
need to take care to return the sret pointer as one of the return values
if that wasn't specified in the initial function signature.
Struct arguments are a little more complex. A struct argument is stored
as a chunk of memory in the stack-args space. However, the CLIF
semantics are slightly special: on the caller side, the parameter passed
in is a pointer to an arbitrary memory block, and we must memcpy this
data to the on-stack struct-argument; and on the callee side, we provide
a pointer to the passed-in struct-argument as the CLIF block param
value.
This is necessary to support various ABIs other than Wasm, such as that
of Rust (with the cg_clif codegen backend).
This follows the implementation in the legacy x86 backend, including
hardcoded sequence that is compatible with what the linker expects. We
could potentially do better here, but it is likely not necessary.
Thanks to @bjorn3 for a bugfix to an earlier version of this.
This implements all of the ops on I128 that are implemented by the
legacy x86 backend, and includes all that are required by at least one
major use-case (cg_clif rustc backend).
The sequences are open-coded where necessary; for e.g. the bit
operations, this can be somewhat complex, but these sequences have been
tested carefully. This PR also includes a drive-by fix of clz/ctz for 8-
and 16-bit cases where they were incorrect previously.
Also includes ridealong fixes developed while bringing up cg_clif
support, because they are difficult to completely separate due to
other refactors that occurred in this PR:
- fix REX prefix logic for some 8-bit instructions.
When using an 8-bit register in 64-bit mode on x86-64, the REX prefix
semantics are somewhat subtle: without the REX prefix, register numbers
4--7 correspond to the second-to-lowest byte of the first four registers
(AH, CH, BH, DH), whereas with the REX prefix, these register numbers
correspond to the usual encoding (SPL, BPL, SIL, DIL). We could always
emit a REX byte for instructions with 8-bit cases (this is harmless even
if unneeded), but this would unnecessarily inflate code size; instead,
the usual approach is to emit it only for these registers.
This logic was present in some cases but missing for some other
instructions: divide, not, negate, shifts.
Fixes#2508.
- avoid unaligned SSE loads on some f64 ops.
The implementations of several FP ops, such as fabs/fneg, used SSE
instructions. This is not a problem per-se, except that load-op merging
did not take *alignment* into account. Specifically, if an op on an f64
loaded from memory happened to merge that load, and the instruction into
which it was merged was an SSE instruction, then the SSE instruction
imposes stricter (128-bit) alignment requirements than the load.f64 did.
This PR simply forces any instruction lowerings that could use SSE
instructions to implement non-SIMD operations to take inputs in
registers only, and avoid load-op merging.
Fixes#2507.
- two bugfixes exposed by cg_clif: urem/srem.i8, select.b1.
- urem/srem.i8: the 8-bit form of the DIV instruction on x86-64 places
the remainder in AH, not RDX, different from all the other width-forms
of this instruction.
- select.b1: we were not recognizing selects of boolean values as
integer-typed operations, so we were generating XMM moves instead (!).
