- Add relocation handling needed after PR #3275
- Fix incorrect handling of signed constants detected by PR #3056 test
- Fix LabelUse max pos/neg ranges; fix overflow in buffers.rs
- Disable fuzzing tests that require pre-built v8 binaries
- Disable cranelift test that depends on i128
- Temporarily disable memory64 tests
Implemented `Smulhi` for the Cranelift interpreter, performing signed
integer multiplication and producing the high half of a double-length
result.
Copyright (c) 2021, Arm Limited
Implemented `WideningPairwiseDotProductS` to perform sign-extending
length-doubling multiplication on corresponding elements from two
`i16x8` SIMD vectors, performing a pairwise add on the results (thus
returning `i32x4`).
Copyright (c) 2021, Arm Limited
Implemented the following Opcodes for the Cranelift interpreter:
- `Unarrow` to combine two SIMD vectors into a new vector with twice
the lanes but half the width, with signed inputs which are clamped to
`0x00`.
- `Uunarrow` to perform the same operation as `Unarrow` but treating
inputs as unsigned.
- `Snarrow` to perform the same operation as `Unarrow` but treating
both inputs and outputs as signed, and saturating accordingly.
Note that all 3 instructions saturate at the type boundaries.
Copyright (c) 2021, Arm Limited
Implemented `SwidenLow` and `SwidenHigh` for the Cranelift interpreter,
doubling the width and halving the number of lanes preserving the low
and high halves respectively.
Conversions are performed using signed extension.
Copyright (c) 2021, Arm Limited
Implemented `UwidenLow` and `UwidenHigh` for the Cranelift interpreter,
doubling the width and halving the number of lanes preserving the low
and high halves respectively. Conversions are performed using unsigned
zero extension.
Copyright (c) 2021, Arm Limited
Implemented `Shuffle` for the Cranelift interpreter, to shuffle two SIMD
vectors together based on an immediate mask of 16 bytes.
Copyright (c) 2021, Arm Limited
Implemented for the Cranelift interpreter:
- `Bitrev` to reverse the order of the bits in an integer.
- `Cls` to count the leading bits which are the same as the sign bit in
an integer, yielding one less than the size of the integer for 0 and -1.
- `Clz` to count the number of leading zeros in the bitwise representation of the
integer.
- `Ctz` to count the number of trailing zeros in the bitwise representation of the
integer.
- `Popcnt` to count the number of ones in the bitwise representation of the
integer.
Copyright (c) 2021, Arm Limited
* Implement `Swizzle` and `Splat` for interpreter
Implemented for the Cranelift interpreter:
- `Swizzle` to shuffle an `i8x16` SIMD vector based
on the indices specified in another vector of the same size.
- `Splat` to create a SIMD vector with all lanes having the same value.
Copyright (c) 2021, Arm Limited
* Fix old x86 backend failing test
Copyright (c) 2021, Arm Limited
* Represent i16x8 and above as hex
Copyright (c) 2021, Arm Limited
* cranelift: Implement ZeroExtend for a bunch of types in interpreter
* cranelift: Implement VConst on interpreter
* cranelift: Implement VallTrue on interpreter
* cranelift: Implement VanyTrue on interpreter
* cranelift: Mark `v{all,any}_true` tests as machinst only
* cranelift: Disable `vany_true` tests on aarch64
The `b64x2` case produces an illegal instruction. See #3305
Implemented `SaddSat` and `SsubSat` to add and subtract signed vector
values, saturating at the type boundaries rather than overflowing.
Changed the parser to allow signed `i8` immediates in vectors as part of
this work; fixes#3276.
Copyright (c) 2021, Arm Limited.
- Fixed CI tests for AArch64 and old x86.
- Rename `simd-umulhi.clif` to `umulhi.clif`.
- Rename `simd-umulhi-aarch64.clif` to `simd-umulhi.clif`.
Copyright (c) 2021, Arm Limited.
Implemented `Umulhi` for the Cranelift interpreter, performing unsigned
integer multiplication and producing the high half of a double-length
result.
Fixed `ExtractUpper` conversion behaviour as part of this change, which
was extracting from a 128-bit value regardless of the size of the
original value.
Copyright (c) 2021, Arm Limited.
Implemented `Insertlane` to insert a value in the lane specified by the
immediate value, overwriting the existing value in that lane.
Added `TernaryImm8` support for the `imm_value` function.
Copyright (c) 2021, Arm Limited.
Almost all the tests in the interpreter are already in the runtests
folder so that we can reuse them for the backends. The distinction
between interpreter tests and runtests is no longer very clear, since
they should both support the same clif code, and produce the same results.
We only have two test files:
* `add.clif` tests the add and jump instruction, both of which are
already covered in other test files, so we remove that file.
* `fibonacci.clif` does a recursive call which is currently not supported
in the filetest environment, so we keep this test interpreter only for now.
Implemented `IaddPairwise` for the Cranelift interpreter, to add pairs
of adjacent values in two SIMD vectors, concatenating them at the end
(preserving both lane size and number of lanes).
Copyright (c) 2021, Arm Limited
* Implement `IaddCin`, `IaddCout`, and `IaddCarry` for Cranelift interpreter
Implemented the following Opcodes for the Cranelift interpreter:
- `IaddCin` to add two scalar integers with an input carry flag.
- `IaddCout` to add two scalar integers and report overflow with the carry flag.
- `IaddCarry` to add two scalar integers with an input carry flag, reporting overflow with the output carry flag.
Copyright (c) 2021, Arm Limited
* Simplify carry check + add i64 `IaddCarry` tests
Copyright (c) 2021, Arm Limited
* Move tests to `runtests`
Copyright (c) 2021, Arm Limited
* Cranelift AArch64: Simplify leaf functions that do not use the stack
Leaf functions that do not use the stack (e.g. do not clobber any
callee-saved registers) do not need a frame record.
Copyright (c) 2021, Arm Limited.
* Implement `Extractlane`, `UaddSat`, and `UsubSat` for Cranelift interpreter
Implemented the `Extractlane`, `UaddSat`, and `UsubSat` opcodes for the interpreter,
and added helper functions for working with SIMD vectors (`extractlanes`, `vectorizelanes`,
and `binary_arith`).
Copyright (c) 2021, Arm Limited
* Re-use tests + constrict Vector assert
- Re-use interpreter tests as runtests where supported.
- Constrict Vector assertion.
- Code style adjustments following feedback.
Copyright (c) 2021, Arm Limited
* Runtest `i32x4` vectors on AArch64; add `i64x2` tests
Copyright (c) 2021, Arm Limited
* Add `simd-` prefix to test filenames
Copyright (c) 2021, Arm Limited
* Return aliased `SmallVec` from `extractlanes`
Using a `SmallVec<[i128; 4]>` allows larger-width 128-bit vectors
(`i32x4`, `i64x2`, ...) to not cause heap allocations.
Copyright (c) 2021, Arm Limited
* Accept slice to `vectorizelanes` rather than `Vec`
Copyright (c) 2021, Arm Limited
* cranelift: Add stack support to the interpreter
We also change the approach for heap loads and stores.
Previously we would use the offset as the address to the heap. However,
this approach does not allow using the load/store instructions to
read/write from both the heap and the stack.
This commit changes the addressing mechanism of the interpreter. We now
return the real addresses from the addressing instructions
(stack_addr/heap_addr), and instead check if the address passed into
the load/store instructions points to an area in the heap or the stack.
* cranelift: Add virtual addresses to cranelift interpreter
Adds a Virtual Addressing scheme that was discussed as a better
alternative to returning the real addresses.
The virtual addresses are split into 4 regions (stack, heap, tables and
global values), and the address itself is composed of an `entry` field
and an `offset` field. In general the `entry` field corresponds to the
instance of the resource (e.g. table5 is entry 5) and the `offset` field
is a byte offset inside that entry.
There is one exception to this which is the stack, where due to only
having one stack, the whole address is an offset field.
The number of bits in entry vs offset fields is variable with respect to
the `region` and the address size (32bits vs 64bits). This is done
because with 32 bit addresses we would have to compromise on heap size,
or have a small number of global values / tables. With 64 bit addresses
we do not have to compromise on this, but we need to support 32 bit
addresses.
* cranelift: Remove interpreter trap codes
* cranelift: Calculate frame_offset when entering or exiting a frame
* cranelift: Add safe read/write interface to DataValue
* cranelift: DataValue write full 128bit slot for booleans
* cranelift: Use DataValue accessors for trampoline.
