* Handle select relocations while generating trampolines
Trampoline generation for all function signatures exposed a preexisting
bug in wasmtime where trampoline generation occasionally does have
relocations, but it's asserted that trampolines don't generate
relocations, causing a panic. The relocation is currently primarily the
probestack function which happens when functions might have a huge
number of parameters, but not so huge as to blow the wasmparser limit of
how many parameters are allowed.
This commit fixes the issue by handling relocations for trampolines in
the same manner as the rest of the code. Note that dynamically-generated
trampolines via the `Func` API still panic if they have too many
arguments and generate a relocation, but it seems like we can try to fix
that later if the need truly arises.
Closes#1322
* Log trampoline relocations
* Build wasmtime-c-api differenty in run-examples
This tweaks how the wasmtime-c-api crate is built slightly, changing how
we invoke Cargo. Due to historical Cargo bugs this should help minimize
the number of rebuilds due to features since the feature selection will
be different.
* rustfmt
Until #1306 is resolved (some spilling/regalloc issue with larger FPR register banks), this removes FPR32 support. Only Wasm's `i64x2.mul` was using this register class and that instruction is predicated on AVX512 support; for the time being, that instruction will have to make do with the 16 FPR registers.
... but turn it back on in CI by default. The `binaryen-sys` crate
builds binaryen from source, which is a drag on CI for a few reasons:
* This is quite large and takes a good deal of time to build
* The debug build directory for binaryen is 4GB large
In an effort to both save time and disk space on the builders this
commit adds a `binaryen` feature to the `wasmtime-fuzz` crate. This
feature is enabled specifically when running the fuzzers on CI, but it
is disabled during the typical `cargo test --all` command. This means
that the test builders should save an extra 4G of space and be a bit
speedier now that they don't build a giant wad of C++.
We'll need to update the OSS-fuzz integration to enable the `binaryen`
feature when executing `cargo fuzz build`, and I'll do that once this
gets closer to landing.
* Store module name on `wasmtime_environ::Module`
This keeps all name information in one place so we dont' have to keep
extra structures around in `wasmtime::Module`.
* rustfmt
* Impl different formatters for flags
Rather than forcing only binary formatting of flags types, how about
we implement all relevant traits (`Binary`, `Octal`, `LowerHex`, and
`UpperHex`) and allow the user to pick the most relevant one for their
use case?
Also, we use at least `Octal` and `LowerHex` in a couple of places
in `wasi-common`.
* fmt::Display for flags now inspired by bitflags
Flags is now by default formatted similarly to how
`bitflags` crate does it, namely, `dsync|append (0x11)`. In case
we're dealing with an empty set, we get `empty (0x0)`. Because of
this, any `Octal`, `LowerHex`, etc., formatters are redundant now.
Furthermore, while here, I've rewritten `EMPTY_FLAGS` and `ALL_FLAGS`
(where the former means `0x0` and the latter is the union of all possible
values) to be `const fn empty()` and `const fn all()` where the latter is
an expanded union of primitive representation values out of a macro.
This is again largely inspired by the `bitflags` crate.
* Test fmt::Display for flags
* Fill out API docs on `wasmtime::Module`
Part of #1272
* Apply suggestions from code review
Co-Authored-By: Nick Fitzgerald <fitzgen@gmail.com>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Refactor wasmtime_runtime::Export
Instead of an enumeration with variants that have data fields have an
enumeration where each variant has a struct, and each struct has the
data fields. This allows us to store the structs in the `wasmtime` API
and avoid lots of `panic!` calls and various extraneous matches.
* Pre-generate trampoline functions
The `wasmtime` crate supports calling arbitrary function signatures in
wasm code, and to do this it generates "trampoline functions" which have
a known ABI that then internally convert to a particular signature's ABI
and call it. These trampoline functions are currently generated
on-the-fly and are cached in the global `Store` structure. This,
however, is suboptimal for a few reasons:
* Due to how code memory is managed each trampoline resides in its own
64kb allocation of memory. This means if you have N trampolines you're
using N * 64kb of memory, which is quite a lot of overhead!
* Trampolines are never free'd, even if the referencing module goes
away. This is similar to #925.
* Trampolines are a source of shared state which prevents `Store` from
being easily thread safe.
This commit refactors how trampolines are managed inside of the
`wasmtime` crate and jit/runtime internals. All trampolines are now
allocated in the same pass of `CodeMemory` that the main module is
allocated into. A trampoline is generated per-signature in a module as
well, instead of per-function. This cache of trampolines is stored
directly inside of an `Instance`. Trampolines are stored based on
`VMSharedSignatureIndex` so they can be looked up from the internals of
the `ExportFunction` value.
The `Func` API has been updated with various bits and pieces to ensure
the right trampolines are registered in the right places. Overall this
should ensure that all trampolines necessary are generated up-front
rather than lazily. This allows us to remove the trampoline cache from
the `Compiler` type, and move one step closer to making `Compiler`
threadsafe for usage across multiple threads.
Note that as one small caveat the `Func::wrap*` family of functions
don't need to generate a trampoline at runtime, they actually generate
the trampoline at compile time which gets passed in.
Also in addition to shuffling a lot of code around this fixes one minor
bug found in `code_memory.rs`, where `self.position` was loaded before
allocation, but the allocation may push a new chunk which would cause
`self.position` to be zero instead.
* Pass the `SignatureRegistry` as an argument to where it's needed.
This avoids the need for storing it in an `Arc`.
* Ignore tramoplines for functions with lots of arguments
Co-authored-by: Dan Gohman <sunfish@mozilla.com>
* Temporarily remove support for interface types
This commit temporarily removes support for interface types from the
`wasmtime` CLI and removes the `wasmtime-interface-types` crate. An
error is now printed for any input wasm modules that have wasm interface
types sections to indicate that support has been removed and references
to two issues are printed as well:
* #677 - tracking work for re-adding interface types support
* #1271 - rationale for removal and links to other discussions
Closes#1271
* Update the python extension
* Move all examples to a top-level directory
This commit moves all API examples (Rust and C) to a top-level
`examples` directory. This is intended to make it more discoverable and
conventional as to where examples are located. Additionally all examples
are now available in both Rust and C to see how to execute the example
in the language you're familiar with. The intention is that as more
languages are supported we'd add more languages as examples here too.
Each example is also accompanied by either a `*.wat` file which is
parsed as input, or a Rust project in a `wasm` folder which is compiled
as input.
A simple driver crate was also added to `crates/misc` which executes all
the examples on CI, ensuring the C and Rust examples all execute
successfully.
* add a lifetime to the wiggle_runtime::GuestErrorType trait, wiggle_tests::WasiCtx struct
* wiggle-generate: make config parsing public so it can be reused in lucet
* Add armv7 support to wasi-common
This commit enables `target_pointer_width = 32` compatibility for
`wasi-common` (and by transitivity, any crate found inside, e.g., `yanix`).
I've also added a simplistic (bare minimum) check to our CI to ensure
that `wasi-common` cross-compiles to `armv7-unknown-gnueabihf` fine.
While here, I've done the same for `wasm32-unknown-emscripten`.
* Clean arch-specific impls + reuse libc consts
* Make SeekLoc::from_raw platform independent
* Collapse CI cc jobs into one
To avoid libfuzzer timeouts, limit the total number of API calls we generate in
the `api_calls` fuzz target. We were already limiting the number of exported
function calls we made, and this extends the limit to all API calls.
* Enable the already-passing `bulk-memoryoperations/imports.wast` test
* Implement support for the `memory.init` instruction and passive data
This adds support for passive data segments and the `memory.init` instruction
from the bulk memory operations proposal. Passive data segments are stored on
the Wasm module and then `memory.init` instructions copy their contents into
memory.
* Implement the `data.drop` instruction
This allows wasm modules to deallocate passive data segments that it doesn't
need anymore. We keep track of which segments have not been dropped on an
`Instance` and when dropping them, remove the entry from the instance's hash
map. The module always needs all of the segments for new instantiations.
* Enable final bulk memory operations spec test
This requires special casing an expected error message for an `assert_trap`,
since the expected error message contains the index of an uninitialized table
element, but our trap implementation doesn't save that diagnostic information
and shepherd it out.
* Disallow values to cross stores
Lots of internals in the wasmtime-{jit,runtime} crates are highly
unsafe, so it's up to the `wasmtime` API crate to figure out how to make
it safe. One guarantee we need to provide is that values never cross
between stores. For example you can't take a function in one store and
move it over into a different instance in a different store. This
dynamic check can't be performed at compile time and it's up to
`wasmtime` to do the check itself.
This adds a number of checks, but not all of them, to the codebase for
now. This primarily adds checks around instantiation, globals, and
tables. The main hole in this is functions, where you can pass in
arguments or return values that are not from the right store. For now
though we can't compile modules with `anyref` parameters/returns anyway,
so we should be good. Eventually when that is supported we'll need to
put the guards in place.
Closes#958
* Clarify how values test they come from stores
* Allow null anyref to initialize tables
* Introduce WasiCtxBuilderError error type
`WasiCtxBuilderError` is the `wasi-common` client-facing error type
which is exclusively thrown when building a new `WasiCtx` instance.
As such, building such an instance should not require the client to
understand different WASI errno values as was assumed until now.
This commit is a first step at streamlining error handling in
`wasi-common` and makes way for the `wiggle` crate.
When adding the `WasiCtxBuilderError`, I've had to do two things of
notable importance:
1. I've removed a couple of `ok_or` calls in `WasiCtxBuilder::build`
and replaced them with `unwrap`s, following the same pattern in
different builder methods above. This is fine since we _always_
operate on non-empty `Option`s in `WasiCtxBuilder` thus `unwrap`ing
will never fail. On the other hand, this might be a good opportunity
to rethink the structure of our builder, and how we good remove
the said `Option`s especially since we always populate them with
empty containers to begin with. I understand this is to make
chaining of builder methods easier which take and return `&mut self`
and the same applies to `WasiCtxBuilder::build(&mut self)` method,
but perhaps it would more cleanly signal the intentions if we simply
moved `WasiCtxBuilder` instance around. Food for thought!
2. Methods specific to determining rights of passed around `std::fs::File`
objects when populating `WasiCtx` `FdEntry` entities now return
`io::Error` directly so that we can reuse them in `WasiCtxBuilder` methods
(returning `WasiCtxBuilderError` error type), and in syscalls
(returning WASI errno).
* Return WasiError directly in syscalls
Also, removes `error::Error` type altogether. Now, `io::Error` and
related are automatically converted to their corresponding WASI
errno value encapsulated as `WasiError`.
While here, it made sense to me to move `WasiError` to `wasi` module
which will align itself well with the upcoming changes introduced
by `wiggle`. To different standard `Result` from WASI specific, I've
created a helper alias `WasiResult` also residing in `wasi` module.
* Update wig
* Add from ffi::NulError and pass context to NotADirectory
* Add dummy commit to test CI
* Move filetime module to yanix
I've noticed that we could replace every occurrence of `crate::Result`
in `filetime` mods with `io::Result`, so I thought why not move it
to `yanix` and get rid off a lot of unnecessary code duplication
within `wasi-common`. Now, ideally I'd have our `filetime` modifications
backported to Alex's [`filetime`] crate, but one step at a time
(apologies Alex, I was meant to backport this ages ago, just didn't
find the time yet... :-().
Anyway, this commit does just that; i.e., moves the `filetime` modules
into `yanix` which seems a better fit for this type of code.
[`filetime`]: https://github.com/alexcrichton/filetime
There is one caveat here. On Emscripten, converting between `filetime::Filetime`
and `libc::timespec` appears to be lossy, at least as far as the
types are concerned. Now, `filetime::Filetime`'s seconds field is
`i64` while nanoseconds field is `u32`, while Emscripten's
`libc::timespec` requires both to be `i32` width. This might actually
not be a problem since I don't think it's possible to fill `filetime::Filetime`
struct with values of width wider than `i32` since Emscripten is 32bit
but just to be on the safe side, we do a `TryInto` conversion, log
the error (if any), and return `libc::EOVERFLOW`.
* Run cargo fmt
* Use i64::from instead of as cast
* Winx now returns io::Error
This commit is a spiritual follower of #1242 in the sense that it
adjusts `winx` to also return `io::Error` directly rather than
tossing a custom error type here and there.
* Adapt wasi-common to changes in winx
* Run cargo fmt
* Swap overly big map_err with explicit match
* wiggle-runtime: add as_raw method for [T]
* add trivial borrow checker back in
* integrate runtime borrow checker with as_raw methods
* handle pointer arith overflow correctly in as_raw, create PtrOverflow error
* runtime: add validation back to GuestType
* generate: impl validate for enums, flags, handles, ints
* oops! make validate its own method on trait GuestTypeTransparent
* fix transparent impls for enum, flag, handle, int
* some structs are transparent. fix tests.
* tests: define byte_slice_strat and friends
* wiggle-tests: i believe my allocator is working now
* some type juggling around memset for ease of use
* make GuestTypeTransparent an unsafe trait
* delete redundant validation of pointer align
* fix doc
* wiggle_test: aha, you cant use sets to track memory areas
* add multi-string test
which exercises the runtime borrow checker against
HostMemory::byte_slice_strat
* oops left debug panic in
* remove redundant (& incorrect, since unchecked) length calc
* redesign validate again, and actually hook to as_raw
* makr all validate impls as inline
this should hopefully allow as_raw's check loop to be unrolled to a
no-op in most cases!
* code review fixes
* Yanix now returns io::Error
This commit may seem somewhat controversial at first, but hear me
out first. Currently, Yanix would return a custom error that's a
wrapper around three other error types returned by various entities
inside Rust's `libstd`. In particular, Yanix's error type would wrap
`io::Error`, `num::TryFromIntError` and `ffi::NulError`. It turns
out that there is a natural conversion between the first and the last
and provided by the standard library, i.e., `From<ffi::NulError> for io::Error`
is provided. So at the surface it may seem that only the first two
wrapped error types are worth keeping.
Digging a little bit deeper into `libstd`, `num::TryFromIntError`
is essentially speaking only a marker that the integral conversion
went wrong. The struct implementing this error stores a unit type,
and nothing more. It therefore seems like a waste to wrap this
particular error when we could unify everything under `io::Error`.
And so, whenever we perform an int conversion, I suggest we simply
remap the error to `io::Error::from_raw_os_error(libc::EOVERFLOW)`
since this carries a comparable amount of information.
As a result of completely discarding `yanix::Error` custom error type,
we are invariably simplifying `yanix` itself, but also allowing
`wasi-common` to simplify in several places as well.
* Adapt wasi-common to changes in yanix
* Add Cargo.lock
* Unwrap try_into's where possible
* Remove unnecessary type annotation
* Add support for virtual files (eg, not backed by an OS file).
Virtual files are implemented through trait objects, with a default
implementation that tries to behave like on-disk files, but entirely
backed by in-memory structures.
Co-authored-by: Dan Gohman <sunfish@mozilla.com>
This commit expands the documentation of the `Func` type as well as
updating the Rust embedding tutorial with more recent APIs. I wanted to
also leave space in the Rust tutorial to get more ambitious over time
with what it's documenting, but I stopped around here, curious to see
what others think about it!
* Reuse std::io::Error for raw *nix errno
This commit removes custom `yanix::Errno` and instead (as was
previously suggested) reuses `std::io::Error` to generate and wrap
raw *nix errno value.
* Update wasi-common to use new Yanix error type
This commit updates `wasi-common` to use new way of handling raw
OS error in `yanix`; i.e., via re-use of `std::io::Error` instead
of a custom `Errno` enum.
* Fix formatting
* Unwrap if io::Error created from raw OS error
This commit calls `unwrap` on `err` if that one was created via
`io::Error::last_os_error()`. It also refactors error matching
in several syscalls on the BSD platform (mainly).
