- Handle call instructions' clobbers with the clobbers API, using RA2's
clobbers bitmask (bytecodealliance/regalloc2#58) rather than clobbers
list;
- Pull in changes from bytecodealliance/regalloc2#59 for much more sane
edge-case behavior w.r.t. liverange splitting.
Now the fiber implementation on AArch64 authenticates function
return addresses and includes the relevant BTI instructions, except
on macOS.
Also, change the locations of the saved FP and LR registers on the
fiber stack to make them compliant with the Procedure Call Standard
for the Arm 64-bit Architecture.
Copyright (c) 2022, Arm Limited.
RA2 recently removed the need for a dedicated scratch register for
cyclic moves (bytecodealliance/regalloc2#51). This has moderate positive
performance impact on function bodies that were register-constrained, as
it means that one more register is available. In Sightglass, I measured
+5-8% on `blake3-scalar`, at least among current benchmarks.
* Remove unused srcloc in MachReloc
* Remove unused srcloc in MachTrap
* Use `into_iter` on array in bench code to suppress a warning
* Remove unused srcloc in MachCallSite
* Narrow `allow(dead_code)` declarations
Having module wide `allow(dead_code)` may hide some code that's really
dead. In this commit I just narrowed the declarations to the specific
enum variants that were not used (as it seems reasonable to keep them
and their handling in all the matches, for future use). And the compiler
found more dead code that I think we can remove safely in the short
term.
With this, the only files annotated with a module-wide
`allow(dead_code)` are isle-generated files.
* resurrect some functions as test helpers
Currently, we have partial Spectre mitigation: we protect heap accesses
with dynamic bounds checks. Specifically, we guard against errant
accesses on the misspeculated path beyond the bounds-check conditional
branch by adding a conditional move that is also dependent on the
bounds-check condition. This data dependency on the condition is not
speculated and thus will always pick the "safe" value (in the heap case,
a NULL address) on the misspeculated path, until the pipeline flushes
and recovers onto the correct path.
This PR uses the same technique both for table accesses -- used to
implement Wasm tables -- and for jumptables, used to implement Wasm
`br_table` instructions.
In the case of Wasm tables, the cmove picks the table base address on
the misspeculated path. This is equivalent to reading the first table
entry. This prevents loads of arbitrary data addresses on the
misspeculated path.
In the case of `br_table`, the cmove picks index 0 on the misspeculated
path. This is safer than allowing a branch to an address loaded from an
index under misspeculation (i.e., it preserves control-flow integrity
even under misspeculation).
The table mitigation is controlled by a Cranelift setting, on by
default. The br_table mitigation is always on, because it is part of the
single lowering pseudoinstruction. In both cases, the impact should be
minimal: a single extra cmove in a (relatively) rarely-used operation.
The table mitigation is architecture-independent (happens during
legalization); the br_table mitigation has been implemented for both x64
and aarch64. (I don't know enough about s390x to implement this
confidently there, but would happily review a PR to do the same on that
platform.)
Also fix and extend the current implementation:
- AtomicRMWOp::Clr != AtomicRmwOp::And, as the input needs to be
inverted first.
- Inputs to the cmp for the RMWLoop case are sign-extended when
needed.
- Lower Xchg to Swp.
- Lower Sub to Add with a negated input.
- Added more runtests.
Copyright (c) 2022, Arm Limited.
Previously, the block successor accumulation and the blockparam branch
arg setup were decoupled. The lowering backend implicitly specified
the order of successor edges via its `MachTerminator` enum on the last
instruction in the block, while the `Lower` toplevel
machine-independent driver set up blockparam branch args in the edge
order seen in CLIF.
In some cases, these orders did not match -- for example, when the
conditional branch depended on an FP condition that was implemented by
swapping taken/not-taken edges and inverting the condition code.
This PR refactors the successor handling to be centralized in `Lower`
rather than flow through the terminator `MachInst`, and adds a
successor block and its blockparam args at the same time, ensuring the
orders match.
Merge Mov32 and Mov64 into a single instruction parameterized by a new
OperandSize field. Also combine the Mov[K,N,Z] into a single instruction
with a new opcode to select between the operations.
Copyright (c) 2022, Arm Limited.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
Combine the two opcodes into one and pass and add an OperandSize
field to these instructions, as well as an ISLE helper to perform
the conversion from Type.
This saves us from having having to write ISLE helpers to select the
correct opcode, based on type, and reduces the amount of code needed
for emission.
Copyright (c) 2022, Arm Limited.
Addresses #3809: when we are asked to create a Cranelift backend with
shared flags that indicate support for SIMD, we should check that the
ISA level needed for our SIMD lowerings is present.
This commit translates the `rotl` and `rotr` lowerings already existing
to ISLE. The port was relatively straightforward with the biggest
changing being the instructions generated around i128 rotl/rotr
primarily due to register changes.
This commit is the first "meaty" instruction added to ISLE for the
AArch64 backend. I chose to pick the first two in the current lowering's
`match` statement, `isub` and `iadd`. These two turned out to be
particularly interesting for a few reasons:
* Both had clearly migratable-to-ISLE behavior along the lines of
special-casing per type. For example 128-bit and vector arithmetic
were both easily translateable.
* The `iadd` instruction has special cases for fusing with a
multiplication to generate `madd` which is expressed pretty easily in
ISLE.
* Otherwise both instructions had a number of forms where they attempted
to interpret the RHS as various forms of constants, extends, or
shifts. There's a bit of a design space of how best to represent this
in ISLE and what I settled on was to have a special case for each form
of instruction, and the special cases are somewhat duplicated between
`iadd` and `isub`. There's custom "extractors" for the special cases
and instructions that support these special cases will have an
`rule`-per-case.
Overall I think the ISLE transitioned pretty well. I don't think that
the aarch64 backend is going to follow the x64 backend super closely,
though. For example the x64 backend is having a helper-per-instruction
at the moment but with AArch64 it seems to make more sense to only have
a helper-per-enum-variant-of-`MInst`. This is because the same
instruction (e.g. `ALUOp::Sub32`) can be expressed with multiple
different forms depending on the payload.
It's worth noting that the ISLE looks like it's a good deal larger than
the code actually being removed from lowering as part of this commit. I
think this is deceptive though because a lot of the logic in
`put_input_in_rse_imm12_maybe_negated` and `alu_inst_imm12` is being
inlined into the ISLE definitions for each instruction instead of having
it all packed into the helper functions. Some of the "boilerplate" here
is the addition of various ISLE utilities as well.
* aarch64: Initial work to transition backend to ISLE
This commit is what is hoped to be the initial commit towards migrating
the aarch64 backend to ISLE. There's seemingly a lot of changes here but
it's intended to largely be code motion. The current thinking is to
closely follow the x64 backend for how all this is handled and
organized.
Major changes in this PR are:
* The `Inst` enum is now defined in ISLE. This avoids having to define
it in two places (once in Rust and once in ISLE). I've preserved all
the comments in the ISLE and otherwise this isn't actually a
functional change from the Rust perspective, it's still the same enum
according to Rust.
* Lots of little enums and things were moved to ISLE as well. As with
`Inst` their definitions didn't change, only where they're defined.
This will give future ISLE PRs access to all these operations.
* Initial code for lowering `iconst`, `null`, and `bconst` are
implemented. Ironically none of this is actually used right now
because constant lowering is handled in `put_input_in_regs` which
specially handles constants. Nonetheless I wanted to get at least
something simple working which shows off how to special case various
things that are specific to AArch64. In a future PR I plan to hook up
const-lowering in ISLE to this path so even though
`iconst`-the-clif-instruction is never lowered this should use the
const lowering defined in ISLE rather than elsewhere in the backend
(eventually leading to the deletion of the non-ISLE lowering).
* The `IsleContext` skeleton is created and set up for future additions.
* Some code for ISLE that's shared across all backends now lives in
`isle_prelude_methods!()` and is deduplicated between the AArch64
backend and the x64 backend.
* Register mapping is tweaked to do the same thing for AArch64 that it
does for x64. Namely mapping virtual registers is supported instead of
just virtual to machine registers.
My main goal with this PR was to get AArch64 into a place where new
instructions can be added with relative ease. Additionally I'm hoping to
figure out as part of this change how much to share for ISLE between
AArch64 and x64 (and other backends).
* Don't use priorities with rules
* Update .gitattributes with concise syntax
* Deduplicate some type definitions
* Rebuild ISLE
* Move isa::isle to machinst::isle
Rename the existing AtomicRMW to AtomicRMWLoop and directly lower
atomic_rmw operations, without a loop if LSE support is available.
Copyright (c) 2021, Arm Limited
There were cases where the AArch64 backend assumed that an IR
operation would always operate on certain types (the most likely
reason being that the corresponding WebAssembly instruction did
not cover anything else), even though the definition of the IR
operation imposed no constraints like that.
Copyright (c) 2021, Arm Limited.
* Use relative `call` instructions between wasm functions
This commit is a relatively major change to the way that Wasmtime
generates code for Wasm modules and how functions call each other.
Prior to this commit all function calls between functions, even if they
were defined in the same module, were done indirectly through a
register. To implement this the backend would emit an absolute 8-byte
relocation near all function calls, load that address into a register,
and then call it. While this technique is simple to implement and easy
to get right, it has two primary downsides associated with it:
* Function calls are always indirect which means they are more difficult
to predict, resulting in worse performance.
* Generating a relocation-per-function call requires expensive
relocation resolution at module-load time, which can be a large
contributing factor to how long it takes to load a precompiled module.
To fix these issues, while also somewhat compromising on the previously
simple implementation technique, this commit switches wasm calls within
a module to using the `colocated` flag enabled in Cranelift-speak, which
basically means that a relative call instruction is used with a
relocation that's resolved relative to the pc of the call instruction
itself.
When switching the `colocated` flag to `true` this commit is also then
able to move much of the relocation resolution from `wasmtime_jit::link`
into `wasmtime_cranelift::obj` during object-construction time. This
frontloads all relocation work which means that there's actually no
relocations related to function calls in the final image, solving both
of our points above.
The main gotcha in implementing this technique is that there are
hardware limitations to relative function calls which mean we can't
simply blindly use them. AArch64, for example, can only go +/- 64 MB
from the `bl` instruction to the target, which means that if the
function we're calling is a greater distance away then we would fail to
resolve that relocation. On x86_64 the limits are +/- 2GB which are much
larger, but theoretically still feasible to hit. Consequently the main
increase in implementation complexity is fixing this issue.
This issue is actually already present in Cranelift itself, and is
internally one of the invariants handled by the `MachBuffer` type. When
generating a function relative jumps between basic blocks have similar
restrictions. This commit adds new methods for the `MachBackend` trait
and updates the implementation of `MachBuffer` to account for all these
new branches. Specifically the changes to `MachBuffer` are:
* For AAarch64 the `LabelUse::Branch26` value now supports veneers, and
AArch64 calls use this to resolve relocations.
* The `emit_island` function has been rewritten internally to handle
some cases which previously didn't come up before, such as:
* When emitting an island the deadline is now recalculated, where
previously it was always set to infinitely in the future. This was ok
prior since only a `Branch19` supported veneers and once it was
promoted no veneers were supported, so without multiple layers of
promotion the lack of a new deadline was ok.
* When emitting an island all pending fixups had veneers forced if
their branch target wasn't known yet. This was generally ok for
19-bit fixups since the only kind getting a veneer was a 19-bit
fixup, but with mixed kinds it's a bit odd to force veneers for a
26-bit fixup just because a nearby 19-bit fixup needed a veneer.
Instead fixups are now re-enqueued unless they're known to be
out-of-bounds. This may run the risk of generating more islands for
19-bit branches but it should also reduce the number of islands for
between-function calls.
* Otherwise the internal logic was tweaked to ideally be a bit more
simple, but that's a pretty subjective criteria in compilers...
I've added some simple testing of this for now. A synthetic compiler
option was create to simply add padded 0s between functions and test
cases implement various forms of calls that at least need veneers. A
test is also included for x86_64, but it is unfortunately pretty slow
because it requires generating 2GB of output. I'm hoping for now it's
not too bad, but we can disable the test if it's prohibitive and
otherwise just comment the necessary portions to be sure to run the
ignored test if these parts of the code have changed.
The final end-result of this commit is that for a large module I'm
working with the number of relocations dropped to zero, meaning that
nothing actually needs to be done to the text section when it's loaded
into memory (yay!). I haven't run final benchmarks yet but this is the
last remaining source of significant slowdown when loading modules,
after I land a number of other PRs both active and ones that I only have
locally for now.
* Fix arm32
* Review comments
* Cranelift AArch64: Simplify leaf functions that do not use the stack
Leaf functions that do not use the stack (e.g. do not clobber any
callee-saved registers) do not need a frame record.
Copyright (c) 2021, Arm Limited.
The AArch64 support was a bit broken and was using Armv7 style
barriers, which aren't required with Armv8 acquire-release
load/stores.
The fallback CAS loops and RMW, for AArch64, have also been updated
to use acquire-release, exclusive, instructions which, again, remove
the need for barriers. The CAS loop has also been further optimised
by using the extending form of the cmp instruction.
Copyright (c) 2021, Arm Limited.
Cranelift crates have historically been much more verbose with debug-level
logging than most other crates in the Rust ecosystem. We log things like how
many parameters a basic block has, the color of virtual registers during
regalloc, etc. Even for Cranelift hackers, these things are largely only useful
when hacking specifically on Cranelift and looking at a particular test case,
not even when using some Cranelift embedding (such as Wasmtime).
Most of the time, when people want logging for their Rust programs, they do
something like:
RUST_LOG=debug cargo run
This means that they get all that mostly not useful debug logging out of
Cranelift. So they might want to disable logging for Cranelift, or change it to
a higher log level:
RUST_LOG=debug,cranelift=info cargo run
The problem is that this is already more annoying to type that `RUST_LOG=debug`,
and that Cranelift isn't one single crate, so you actually have to play
whack-a-mole with naming all the Cranelift crates off the top of your head,
something more like this:
RUST_LOG=debug,cranelift=info,cranelift_codegen=info,cranelift_wasm=info,...
Therefore, we're changing most of the `debug!` logs into `trace!` logs: anything
that is very Cranelift-internal, unlikely to be useful/meaningful to the
"average" Cranelift embedder, or prints a message for each instruction visited
during a pass. On the other hand, things that just report a one line statistic
for a whole pass, for example, are left as `debug!`. The more verbose the log
messages are, the higher the bar they must clear to be `debug!` rather than
`trace!`.
Also, reorganize the AArch64-specific VCode instructions for unary
narrowing and widening vector operations, so that they are more
straightforward to use.
Copyright (c) 2021, Arm Limited.
Implement the `TlsValue` opcode in the aarch64 backend for ELF_GD.
This is a little bit unusual as the default TLS mechanism for aarch64 is TLS Descriptors in other compilers.
However currently we only recognize elf_gd so lets start with that as a TLS implementation.
