* cranelift-codegen: Remove all uses of DataValue
This type is only used by the interpreter, cranelift-fuzzgen, and
filetests. I haven't found another convenient crate for those to all
depend on where this type can live instead, but this small refactor at
least makes it obvious that code generation does not in any way depend
on the implementation of this type.
* Make DataValue, not Ieee32/64, respect IEEE754
This fixes#4857 by partially reverting #4849.
It turns out that Ieee32 and Ieee64 need bitwise equality semantics so
they can be used as hash-table keys.
Moving the IEEE754 semantics up a layer to DataValue makes sense in
conjunction with #4855, where we introduced a DataValue::bitwise_eq
alternative implementation of equality for those cases where users of
DataValue still want the bitwise equality semantics.
* cranelift-interpreter: Use eq/ord from DataValue
This fixes#4828, again, now that the comparison operators on DataValue
have the right IEEE754 semantics.
* Add regression test from issue #4857
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
This change removes all variants of `load*_complex` and `store*_complex`
from Cranelift; this is a breaking change to the instructions exposed by
CLIF. The complete list of instructions removed is: `load_complex`,
`store_complex`, `uload8_complex`, `sload8_complex`, `istore8_complex`,
`sload8_complex`, `uload16_complex`, `sload16_complex`,
`istore16_complex`, `uload32_complex`, `sload32_complex`,
`istore32_complex`, `uload8x8_complex`, `sload8x8_complex`,
`sload16x4_complex`, `uload16x4_complex`, `uload32x2_complex`,
`sload32x2_complex`.
The rationale for this removal is that the Cranelift backend now has the
ability to pattern-match multiple upstream additions in order to
calculate the address to access. Previously, this was not possible so
the `*_complex` instructions were needed. Over time, these instructions
have fallen out of use in this repository, making the additional
overhead of maintaining them a chore.
This also paves the way for unifying TargetIsa and MachBackend, since now they map one to one. In theory the two traits could be merged, which would be nice to limit the number of total concepts. Also they have quite different responsibilities, so it might be fine to keep them separate.
Interestingly, this PR started as removing RegInfo from the TargetIsa trait since the adapter returned a dummy value there. From the fallout, noticed that all Display implementations didn't needed an ISA anymore (since these were only used to render ISA specific registers). Also the whole family of RegInfo / ValueLoc / RegUnit was exclusively used for the old backend, and these could be removed. Notably, some IR instructions needed to be removed, because they were using RegUnit too: this was the oddball of regfill / regmove / regspill / copy_special, which were IR instructions inserted by the old regalloc. Fare thee well!
Implemented `Insertlane` to insert a value in the lane specified by the
immediate value, overwriting the existing value in that lane.
Added `TernaryImm8` support for the `imm_value` function.
Copyright (c) 2021, Arm Limited.
* cranelift: Add stack support to the interpreter
We also change the approach for heap loads and stores.
Previously we would use the offset as the address to the heap. However,
this approach does not allow using the load/store instructions to
read/write from both the heap and the stack.
This commit changes the addressing mechanism of the interpreter. We now
return the real addresses from the addressing instructions
(stack_addr/heap_addr), and instead check if the address passed into
the load/store instructions points to an area in the heap or the stack.
* cranelift: Add virtual addresses to cranelift interpreter
Adds a Virtual Addressing scheme that was discussed as a better
alternative to returning the real addresses.
The virtual addresses are split into 4 regions (stack, heap, tables and
global values), and the address itself is composed of an `entry` field
and an `offset` field. In general the `entry` field corresponds to the
instance of the resource (e.g. table5 is entry 5) and the `offset` field
is a byte offset inside that entry.
There is one exception to this which is the stack, where due to only
having one stack, the whole address is an offset field.
The number of bits in entry vs offset fields is variable with respect to
the `region` and the address size (32bits vs 64bits). This is done
because with 32 bit addresses we would have to compromise on heap size,
or have a small number of global values / tables. With 64 bit addresses
we do not have to compromise on this, but we need to support 32 bit
addresses.
* cranelift: Remove interpreter trap codes
* cranelift: Calculate frame_offset when entering or exiting a frame
* cranelift: Add safe read/write interface to DataValue
* cranelift: DataValue write full 128bit slot for booleans
* cranelift: Use DataValue accessors for trampoline.
Fixes#2943, though not as optimally as may be desired. With x64 SIMD
instructions, the memory operand must be aligned--this change adds that
check. There are cases, however, where we can do better--see #3106.
This lets us avoid the cost of `cranelift_codegen::ir::Opcode` to
`peepmatic_runtime::Operator` conversion overhead, and paves the way for
allowing Peepmatic to support non-clif optimizations (e.g. vcode optimizations).
Rather than defining our own `peepmatic::Operator` type like we used to, now the
whole `peepmatic` crate is effectively generic over a `TOperator` type
parameter. For the Cranelift integration, we use `cranelift_codegen::ir::Opcode`
as the concrete type for our `TOperator` type parameter. For testing, we also
define a `TestOperator` type, so that we can test Peepmatic code without
building all of Cranelift, and we can keep them somewhat isolated from each
other.
The methods that `peepmatic::Operator` had are now translated into trait bounds
on the `TOperator` type. These traits need to be shared between all of
`peepmatic`, `peepmatic-runtime`, and `cranelift-codegen`'s Peepmatic
integration. Therefore, these new traits live in a new crate:
`peepmatic-traits`. This crate acts as a header file of sorts for shared
trait/type/macro definitions.
Additionally, the `peepmatic-runtime` crate no longer depends on the
`peepmatic-macro` procedural macro crate, which should lead to faster build
times for Cranelift when it is using pre-built peephole optimizers.
Certain operations (e.g. widening) will have operands with types like `NxM` but will return results with types like `(N*2)x(M/2)` (double the lane width, halve the number of lanes; maintain the same number of vector bits). This is equivalent to applying two `DerivedFunction`s to the type: `DerivedFunction::DoubleWidth` then `DerivedFunction::HalfVector`. Since there is no easy way to apply multiple `DerivedFunction`s (e.g. most of the logic is one-level deep, 1d5a678124/cranelift/codegen/meta/src/gen_inst.rs (L618-L621)), I added `DerivedFunction::MergeLanes` to do the necessary type conversion.
When we vendor Cranelift into Firefox, we need to be able to build with
the Firefox CI setup (unless we carry patches on top of upstream).
Unfortunately, the Firefox CI currently appears to build with a slightly
older version of Rust: I can't work out which version exactly, but one
without stable support for `matches!()`.
A recent attempt to version-bump Cranelift failed with build errors at
the two locations in this patch:
https://treeherder.mozilla.org/logviewer.html#/jobs?job_id=305994046&repo=autoland&lineNumber=24829
I also see a bunch of uses of `matches!()` in Peepmatic, but those
crates are not built by Firefox, so we can leave them be for now, I
think.
This ports all of the identity, no-op, simplification, and canonicalization
related optimizations over from being hand-coded to the `peepmatic` DSL. This
does not handle the branch-to-branch optimizations or most of the
divide-by-constant optimizations.
Certain operations (e.g. x86_packss) will have operands with types like `NxM` but will return results with types like `(N/2)x(M*2)` (halve the lane width, double the number of lanes; maintain the same number of vector bits). This is equivalent to applying two `DerivedFunction`s to the type: `DerivedFunction::HalfWidth` then `DerivedFunction::DoubleVector`. Since there is no easy way to apply multiple `DerivedFunction`s (e.g. most of the logic is one-level deep, 1d5a678124/cranelift/codegen/meta/src/gen_inst.rs (L618-L621)), I added `DerivedFunction::SplitLanes` to do the necessary type conversion.
* Manually rename BasicBlock to BlockPredecessor
BasicBlock is a pair of (Ebb, Inst) that is used to represent the
basic block subcomponent of an Ebb that is a predecessor to an Ebb.
Eventually we will be able to remove this struct, but for now it
makes sense to give it a non-conflicting name so that we can start
to transition Ebb to represent a basic block.
I have not updated any comments that refer to BasicBlock, as
eventually we will remove BlockPredecessor and replace with Block,
which is a basic block, so the comments will become correct.
* Manually rename SSABuilder block types to avoid conflict
SSABuilder has its own Block and BlockData types. These along with
associated identifier will cause conflicts in a later commit, so
they are renamed to be more verbose here.
* Automatically rename 'Ebb' to 'Block' in *.rs
* Automatically rename 'EBB' to 'block' in *.rs
* Automatically rename 'ebb' to 'block' in *.rs
* Automatically rename 'extended basic block' to 'basic block' in *.rs
* Automatically rename 'an basic block' to 'a basic block' in *.rs
* Manually update comment for `Block`
`Block`'s wikipedia article required an update.
* Automatically rename 'an `Block`' to 'a `Block`' in *.rs
* Automatically rename 'extended_basic_block' to 'basic_block' in *.rs
* Automatically rename 'ebb' to 'block' in *.clif
* Manually rename clif constant that contains 'ebb' as substring to avoid conflict
* Automatically rename filecheck uses of 'EBB' to 'BB'
'regex: EBB' -> 'regex: BB'
'$EBB' -> '$BB'
* Automatically rename 'EBB' 'Ebb' to 'block' in *.clif
* Automatically rename 'an block' to 'a block' in *.clif
* Fix broken testcase when function name length increases
Test function names are limited to 16 characters. This causes
the new longer name to be truncated and fail a filecheck test. An
outdated comment was also fixed.
-Add resumable_trap, safepoint, isnull, and null instructions
-Add Stackmap struct and StackmapSink trait
Co-authored-by: Mir Ahmed <mirahmed753@gmail.com>
Co-authored-by: Dan Gohman <sunfish@mozilla.com>
