When adding some optimization rules for `icmp` in the egraph
infrastructure, we ended up creating a path to legal CLIF but with
patterns unsupported by three of our four backends: specifically,
`select_spectre_guard` with a general truthy input, rather than an
`icmp`.
In #5206 we discussed replacing `select_spectre_guard` with something
more specific, and that could still be a long-term solution here, but
doing so now would interfere with ongoing refactoring of heap access
lowering, so I've opted not to do so. (In that issue I was concerned
about complexity and didn't see the need but with this fuzzbug I'm
starting to feel a bit differently; maybe we should remove this
non-orthogonal op in the long run.)
Fixes#5417.
This commit prepares the x64 pieces from cranelift codegen to be consumed by
Winch for binary emission. This change doesn't introduce or modifies
functionality it makes the necessary pieces for binary emission public.
This change also improves documentation where applicable.
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
* cranelift-isle: Add "partial" flag for constructors
Instead of tying fallibility of constructors to whether they're either
internal or pure, this commit assumes all constructors are infallible
unless tagged otherwise with a "partial" flag.
Internal constructors without the "partial" flag are not allowed to use
constructors which have the "partial" flag on the right-hand side of any
rules, because they have no way to report last-minute match failures.
Multi-constructors should never be "partial"; they report match failures
with an empty iterator instead. In turn this means you can't use partial
constructors on the right-hand side of internal multi-constructor rules.
However, you can use the same constructors on the left-hand side with
`if` or `if-let` instead.
In many cases, ISLE can already trivially prove that an internal
constructor always returns `Some`. With this commit, those cases are
largely unchanged, except for removing all the `Option`s and `Some`s
from the generated code for those terms.
However, for internal non-partial constructors where ISLE could not
prove that, it now emits an `unreachable!` panic as the last-resort,
instead of returning `None` like it used to do. Among the existing
backends, here's how many constructors have these panic cases:
- x64: 14% (53/374)
- aarch64: 15% (41/277)
- riscv64: 23% (26/114)
- s390x: 47% (268/567)
It's often possible to rewrite rules so that ISLE can tell the panic can
never be hit. Just ensure that there's a lowest-priority rule which has
no constraints on the left-hand side.
But in many of these constructors, it's difficult to statically prove
the unhandled cases are unreachable because that's only down to
knowledge about how they're called or other preconditions.
So this commit does not try to enforce that all terms have a last-resort
fallback rule.
* Check term flags while translating expressions
Instead of doing it in a separate pass afterward.
This involved threading all the term flags (pure, multi, partial)
through the recursive `translate_expr` calls, so I extracted the flags
to a new struct so they can all be passed together.
* Validate multi-term usage
Now that I've threaded the flags through `translate_expr`, it's easy to
check this case too, so let's just do it.
* Extract `ReturnKind` to use in `ExternalSig`
There are only three legal states for the combination of `multi` and
`infallible`, so replace those fields of `ExternalSig` with a
three-state enum.
* Remove `Option` wrapper from multi-extractors too
If we'd had any external multi-constructors this would correct their
signatures as well.
* Update ISLE tests
* Tag prelude constructors as pure where appropriate
I believe the only reason these weren't marked `pure` before was because
that would have implied that they're also partial. Now that those two
states are specified separately we apply this flag more places.
* Fix my changes to aarch64 `lower_bmask` and `imm` terms
* Optimizations to egraph framework:
- Save elaborated results by canonical value, not latest value (union
value). Previously we were artificially skipping and re-elaborating
some values we already had because we were not finding them in the
map.
- Make some changes to handling of icmp results: when icmp became
I8-typed (when bools went away), many uses became `(uextend $I32 (icmp
$I8 ...))`, and so patterns in lowering backends were no longer
matching.
This PR includes an x64-specific change to match `(brz (uextend (icmp
...)))` and similarly for `brnz`, but it also takes advantage of the
ability to write rules easily in the egraph mid-end to rewrite selects
with icmp inputs appropriately.
- Extend constprop to understand selects in the egraph mid-end.
With these changes, bz2.wasm sees a ~1% speedup, and spidermonkey.wasm
with a fib.js input sees a 16.8% speedup:
```
$ time taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./spidermonkey.base.cwasm ./fib.js
1346269
taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./fib.js 2.14s user 0.01s system 99% cpu 2.148 total
$ time taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./spidermonkey.egraphs.cwasm ./fib.js
1346269
taskset 1 target/release/wasmtime run --allow-precompiled --dir=. ./fib.js 1.78s user 0.01s system 99% cpu 1.788 total
```
* Review feedback.
Enable regalloc2's SSA verifier in debug builds to check for any outstanding reuse of virtual registers in def constraints. As fuzzing enables debug_assertions, this will enable the SSA verifier when fuzzing as well.
As loading constants on aarch64 can take up to 4 instructions, we need to plumb through some additional registers. Rather than pass a fixed list of registers in, pass an allocation function.
Introduce a temporary for an intermediate value in the lowering of div in the x64 backend. Additionally, add a src argument to the shift_r smart constructor, which is why the diff got larger than just the div lowering.
Avoid reusing output registers in make_i64x2_from_lanes by threading the output name instead, and using smart constructors for x64_pinsrd instead of constructing the instructions directly.
* Turn off probestack by default in Cranelift
The probestack feature is not implemented for the aarch64 and s390x
backends and currently the on-by-default status requires the aarch64 and
s390x implementations to be a stub. Turning off probestack by default
allows the s390x and aarch64 backends to panic with an error message to
avoid providing a false sense of security. When the probestack option is
implemented for all backends, however, it may be reasonable to
re-enable.
* aarch64: Improve codegen for AMode fallback
Currently the final fallback for finalizing an `AMode` will generate
both a constant-loading instruction as well as an `add` instruction to
the base register into the same temporary. This commit improves the
codegen by removing the `add` instruction and folding the final add into
the finalized `AMode`. This changes the `extendop` used but both
registers are 64-bit so shouldn't be affected by the extending
operation.
* aarch64: Implement inline stack probes
This commit implements inline stack probes for the aarch64 backend in
Cranelift. The support here is modeled after the x64 support where
unrolled probes are used up to a particular threshold after which a loop
is generated. The instructions here are similar in spirit to x64 except
that unlike x64 the stack pointer isn't modified during the unrolled
loop to avoid needing to re-adjust it back up at the end of the loop.
* Enable inline probestack for AArch64 and Riscv64
This commit enables inline probestacks for the AArch64 and Riscv64
architectures in the same manner that x86_64 has it enabled now. Some
more testing was additionally added since on Unix platforms we should be
guaranteed that Rust's stack overflow message is now printed too.
* Enable probestack for aarch64 in cranelift-fuzzgen
* Address review comments
* Remove implicit stack overflow traps from x64 backend
This commit removes implicit `StackOverflow` traps inserted by the x64
backend for stack-based operations. This was historically required when
stack overflow was detected with page faults but Wasmtime no longer
requires that since it's not suitable for wasm modules which call host
functions. Additionally no other backend implements this form of
implicit trap-code additions so this is intended to synchronize the
behavior of all the backends.
This fixes a test added prior for aarch64 to properly abort the process
instead of accidentally being caught by Wasmtime.
* Fix a style issue
Fix shadowing identified in #5322 for imul and swiden_high/swiden_low/uwiden_high/uwiden_low combinations in the x64 backend, and remove some redundant rules from the aarch64 dynamic neon ruleset. Additionally, add tests to the x64 backend showing that the imul specializations are firing.
* Cranelift: Define `heap_load` and `heap_store` instructions
* Cranelift: Implement interpreter support for `heap_load` and `heap_store`
* Cranelift: Add a suite runtests for `heap_{load,store}`
There are so many knobs we can twist for heaps and I wanted to exhaustively test
all of them, so I wrote a script to generate the tests. I've checked in the
script in case we want to make any changes in the future, but I don't think it
is worth adding this to CI to check that scripts are up to date or anything like
that.
* Review feedback
Avoid naming %rcx as written by the CoffTlsGetAddr pseudo-instruction in the x64 backend, and instead emit a fixed-def constraint for a fresh VReg and %rcx.
Remove some unnecessary moves in the x64 gen_memcpy implementation -- the call instruction that's generated will already constrain the args to those registers.
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Add a MemFlags operand to the bitcast instruction, where only the
`big` and `little` flags are accepted. These define the lane order
to be used when casting between types of different lane counts.
Update all users to pass an appropriate MemFlags argument.
Implement lane swaps where necessary in the s390x back-end.
This is the final part necessary to fix
https://github.com/bytecodealliance/wasmtime/issues/4566.
The simplifier was performing an optimization to replace bitselect
with vselect if the all bytes of the condition mask could be shown
to be all ones or all zeros.
This optimization only ever made any difference in codegen on the
x64 target. Therefore, move this optimization to the x64 back-end
and perform it in ISLE instead. Resulting codegen should be
unchanged, with slightly improved compile time.
This also eliminates a few endian-dependent bitcast operations.
* fuzzgen: Request only one variable for bswap
This was included by accident. Bswap only has one input, instead of two.
* cranelift: Add `bswap.i128` support
Adds support only for x86, AArch64, S390X.
RISCV does not yet have bswap.
This branch removes the trapif and trapff instructions, in favor of using an explicit comparison and trapnz. This moves us closer to removing iflags and fflags, but introduces the need to implement instructions like iadd_cout in the x64 and aarch64 backends.
- Allow bitcast for vectors with differing lane widths
- Remove raw_bitcast IR instruction
- Change all users of raw_bitcast to bitcast
- Implement support for no-op bitcast cases across backends
This implements the second step of the plan outlined here:
https://github.com/bytecodealliance/wasmtime/issues/4566#issuecomment-1234819394
* Pull `Module` out of `ModuleTextBuilder`
This commit is the first in what will likely be a number towards
preparing for serializing a compiled component to bytes, a precompiled
artifact. To that end my rough plan is to merge all of the compiled
artifacts for a component into one large object file instead of having
lots of separate object files and lots of separate mmaps to manage. To
that end I plan on eventually using `ModuleTextBuilder` to build one
large text section for all core wasm modules and trampolines, meaning
that `ModuleTextBuilder` is no longer specific to one module. I've
extracted out functionality such as function name calculation as well as
relocation resolving (now a closure passed in) in preparation for this.
For now this just keeps tests passing, and the trajectory for this
should become more clear over the following commits.
* Remove component-specific object emission
This commit removes the `ComponentCompiler::emit_obj` function in favor
of `Compiler::emit_obj`, now renamed `append_code`. This involved
significantly refactoring code emission to take a flat list of functions
into `append_code` and the caller is responsible for weaving together
various "families" of functions and un-weaving them afterwards.
* Consolidate ELF parsing in `CodeMemory`
This commit moves the ELF file parsing and section iteration from
`CompiledModule` into `CodeMemory` so one location keeps track of
section ranges and such. This is in preparation for sharing much of this
code with components which needs all the same sections to get tracked
but won't be using `CompiledModule`. A small side benefit from this is
that the section parsing done in `CodeMemory` and `CompiledModule` is no
longer duplicated.
* Remove separately tracked traps in components
Previously components would generate an "always trapping" function
and the metadata around which pc was allowed to trap was handled
manually for components. With recent refactorings the Wasmtime-standard
trap section in object files is now being generated for components as
well which means that can be reused instead of custom-tracking this
metadata. This commit removes the manual tracking for the `always_trap`
functions and plumbs the necessary bits around to make components look
more like modules.
* Remove a now-unnecessary `Arc` in `Module`
Not expected to have any measurable impact on performance, but
complexity-wise this should make it a bit easier to understand the
internals since there's no longer any need to store this somewhere else
than its owner's location.
* Merge compilation artifacts of components
This commit is a large refactoring of the component compilation process
to produce a single artifact instead of multiple binary artifacts. The
core wasm compilation process is refactored as well to share as much
code as necessary with the component compilation process.
This method of representing a compiled component necessitated a few
medium-sized changes internally within Wasmtime:
* A new data structure was created, `CodeObject`, which represents
metadata about a single compiled artifact. This is then stored as an
`Arc` within a component and a module. For `Module` this is always
uniquely owned and represents a shuffling around of data from one
owner to another. For a `Component`, however, this is shared amongst
all loaded modules and the top-level component.
* The "module registry" which is used for symbolicating backtraces and
for trap information has been updated to account for a single region
of loaded code holding possibly multiple modules. This involved adding
a second-level `BTreeMap` for now. This will likely slow down
instantiation slightly but if it poses an issue in the future this
should be able to be represented with a more clever data structure.
This commit additionally solves a number of longstanding issues with
components such as compiling only one host-to-wasm trampoline per
signature instead of possibly once-per-module. Additionally the
`SignatureCollection` registration now happens once-per-component
instead of once-per-module-within-a-component.
* Fix compile errors from prior commits
* Support AOT-compiling components
This commit adds support for AOT-compiled components in the same manner
as `Module`, specifically adding:
* `Engine::precompile_component`
* `Component::serialize`
* `Component::deserialize`
* `Component::deserialize_file`
Internally the support for components looks quite similar to `Module`.
All the prior commits to this made adding the support here
(unsurprisingly) easy. Components are represented as a single object
file as are modules, and the functions for each module are all piled
into the same object file next to each other (as are areas such as data
sections). Support was also added here to quickly differentiate compiled
components vs compiled modules via the `e_flags` field in the ELF
header.
* Prevent serializing exported modules on components
The current representation of a module within a component means that the
implementation of `Module::serialize` will not work if the module is
exported from a component. The reason for this is that `serialize`
doesn't actually do anything and simply returns the underlying mmap as a
list of bytes. The mmap, however, has `.wasmtime.info` describing
component metadata as opposed to this module's metadata. While rewriting
this section could be implemented it's not so easy to do so and is
otherwise seen as not super important of a feature right now anyway.
* Fix windows build
* Fix an unused function warning
* Update crates/environ/src/compilation.rs
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Cranelift: Use a single, shared vector allocation for all `ABIArg`s
Instead of two `SmallVec`s per `SigData`.
* Remove `Deref` and `DerefMut` impls for `ArgsAccumulator`
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* egraph-based midend: draw the rest of the owl.
* Rename `egg` submodule of cranelift-codegen to `egraph`.
* Apply some feedback from @jsharp during code walkthrough.
* Remove recursion from find_best_node by doing a single pass.
Rather than recursively computing the lowest-cost node for a given
eclass and memoizing the answer at each eclass node, we can do a single
forward pass; because every eclass node refers only to earlier nodes,
this is sufficient. The behavior may slightly differ from the earlier
behavior because we cannot short-circuit costs to zero once a node is
elaborated; but in practice this should not matter.
* Make elaboration non-recursive.
Use an explicit stack instead (with `ElabStackEntry` entries,
alongside a result stack).
* Make elaboration traversal of the domtree non-recursive/stack-safe.
* Work analysis logic in Cranelift-side egraph glue into a general analysis framework in cranelift-egraph.
* Apply static recursion limit to rule application.
* Fix aarch64 wrt dynamic-vector support -- broken rebase.
* Topo-sort cranelift-egraph before cranelift-codegen in publish script, like the comment instructs me to!
* Fix multi-result call testcase.
* Include `cranelift-egraph` in `PUBLISHED_CRATES`.
* Fix atomic_rmw: not really a load.
* Remove now-unnecessary PartialOrd/Ord derivations.
* Address some code-review comments.
* Review feedback.
* Review feedback.
* No overlap in mid-end rules, because we are defining a multi-constructor.
* rustfmt
* Review feedback.
* Review feedback.
* Review feedback.
* Review feedback.
* Remove redundant `mut`.
* Add comment noting what rules can do.
* Review feedback.
* Clarify comment wording.
* Update `has_memory_fence_semantics`.
* Apply @jameysharp's improved loop-level computation.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion commit.
* Fix off-by-one in new loop-nest analysis.
* Review feedback.
* Review feedback.
* Review feedback.
* Use `Default`, not `std::default::Default`, as per @fitzgen
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Apply @fitzgen's comment elaboration to a doc-comment.
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add stat for hitting the rewrite-depth limit.
* Some code motion in split prelude to make the diff a little clearer wrt `main`.
* Take @jameysharp's suggested `try_into()` usage for blockparam indices.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Take @jameysharp's suggestion to avoid double-match on load op.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion (add import).
* Review feedback.
* Fix stack_load handling.
* Remove redundant can_store case.
* Take @jameysharp's suggested improvement to FuncEGraph::build() logic
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Tweaks to FuncEGraph::build() on top of suggestion.
* Take @jameysharp's suggested clarified condition
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Clean up after suggestion (unused variable).
* Fix loop analysis.
* loop level asserts
* Revert constant-space loop analysis -- edge cases were incorrect, so let's go with the simple thing for now.
* Take @jameysharp's suggestion re: result_tys
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix up after suggestion
* Take @jameysharp's suggestion to use fold rather than reduce
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fixup after suggestion
* Take @jameysharp's suggestion to remove elaborate_eclass_use's return value.
* Clarifying comment in terminator insts.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Replace resize+copy_from_slice with extend_from_slice
Vec::resize initializes the new space, which is wasted effort if we're
just going to call `copy_from_slice` on it immediately afterward. Using
`extend_from_slice` is simpler, and very slightly faster.
If the new size were bigger than the buffer we're copying from, then it
would make sense to initialize the excess. But it isn't: it's always
exactly the same size.
* Move helpers from Context to CompiledCode
These methods only use information from Context::compiled_code, so they
should live on CompiledCode instead.
* Remove an unnecessary #[cfg_attr]
There are other uses of `#[allow(clippy::too_many_arguments)]` in this
file, so apparently it doesn't need to be guarded by the "cargo-clippy"
feature.
* Fix a few comments
Two of these were wrong/misleading:
- `FunctionBuilder::new` does not clear the provided func_ctx. It does
debug-assert that the context is already clear, but I don't think
that's worth a comment.
- `switch_to_block` does not "create values for the arguments." That's
done by the combination of `append_block_params_for_function_params`
and `declare_wasm_parameters`.
* wasmtime-cranelift: Misc cleanups
The main change is to use the `CompiledCode` reference we already had
instead of getting it out of `Context` repeatedly. This removes a bunch
of `unwrap()` calls.
* wasmtime-cranelift: Factor out uncached compile
Resolve overlap in the ISLE prelude and the x64 inst module by introducing new types that allow better sharing of extractor resuls, or falling back on priorities.
* ISLE: add support for multi-extractors and multi-constructors.
This support allows for rules that process multiple matching values per
extractor call on the left-hand side, and as a result, can produce
multiple values from the constructor whose body they define.
This is useful in situations where we are matching on an input data
structure that can have multiple "nodes" for a given value or ID, for
example in an e-graph.
* Review feedback: all multi-ctors and multi-etors return iterators; no `Vec` case.
* Add additional warning suppressions to generated-code toplevels to be consistent with new islec output.
* Cranelift: use regalloc2 constraints on caller side of ABI code.
This PR updates the shared ABI code and backends to use register-operand
constraints rather than explicit pinned-vreg moves for register
arguments and return values.
The s390x backend was not updated, because it has its own implementation
of ABI code. Ideally we could converge back to the code shared by x64
and aarch64 (which didn't exist when s390x ported calls to ISLE, so the
current situation is underestandable, to be clear!). I'll leave this for
future work.
This PR exposed several places where regalloc2 needed to be a bit more
flexible with constraints; it requires regalloc2#74 to be merged and
pulled in.
* Update to regalloc2 0.3.3.
In addition to version bump, this required removing two asserts as
`SpillSlot`s no longer carry their class (so we can't assert that they
have the correct class).
* Review comments.
* Filetest updates.
* Add cargo-vet audit for regalloc2 0.3.2 -> 0.3.3 upgrade.
* Update to regalloc2 0.4.0.
* Port `icmp` to ISLE (AArch64)
Ported the existing implementation of `icmp` (and, by extension, the
`lower_icmp` function) to ISLE for AArch64.
Copyright (c) 2022 Arm Limited
* Allow 'producer chains', eliminating `Nop0`s
Copyright (c) 2022 Arm Limited
