This patch makes spillslot allocation, spilling and reloading all based
on register class only. Hence when we have a 32- or 64-bit value in a
128-bit XMM register on x86-64 or vector register on aarch64, this
results in larger spillslots and spills/restores.
Why make this change, if it results in less efficient stack-frame usage?
Simply put, it is safer: there is always a risk when allocating
spillslots or spilling/reloading that we get the wrong type and make the
spillslot or the store/load too small. This was one contributing factor
to CVE-2021-32629, and is now the source of a fuzzbug in SIMD code that
puns an arbitrary user-controlled vector constant over another
stackslot. (If this were a pointer, that could result in RCE. SIMD is
not yet on by default in a release, fortunately.
In particular, we have not been particularly careful about using moves
between values of different types, for example with `raw_bitcast` or
with certain SIMD operations, and such moves indicate to regalloc.rs
that vregs are in equivalence classes and some arbitrary vreg in the
class is provided when allocating the spillslot or spilling/reloading.
Since regalloc.rs does not track actual type, and since we haven't been
careful about moves, we can't really trust this "arbitrary vreg in
equivalence class" to provide accurate type information.
In the fix to CVE-2021-32629 we fixed this for integer registers by
always spilling/reloading 64 bits; this fix can be seen as the analogous
change for FP/vector regs.
* aarch64: Use smaller instruction helpers in ISLE
This commit moves the aarch64 backend's ISLE to be more similar to the
x64 backend's ISLE where one-liner instruction builders are used for
various forms of instructions instead of always using the
constructor-per-variant-of-`Inst`. Overall I think this change worked
out quite well and sets up some naming idioms as well for various forms
of instructions.
* rebase conflict
Fixes#3609. It turns out that `sha2` is a nontrivial dependency for
Cranelift in many contexts, partly because it pulls in a number of other
crates as well.
One option is to remove the hash check under certain circumstances, as
implemented in #3616. However, this is undesirable for other reasons:
having different dependency options in Wasmtime in particular for
crates.io vs. local builds is not really possible, and so either we
still have the higher build cost in Wasmtime, or we turn off the checks
by default, which goes against the original intent of ensuring developer
safety (no mysterious stale-source bugs).
This PR uses `SipHash` instead, which is built into the standard
library. `SipHash` is deprecated, but it's fixed and deterministic
(across runs and across Rust versions), which is what we need, unlike
the suggested replacement `std::collections::hash_map::DefaultHasher`.
The result is only 64 bits, and is not cryptographically secure, but we
never needed that; we just need a simple check to indicate when we
forget a `rebuild-isle`.
This commit translates the `rotl` and `rotr` lowerings already existing
to ISLE. The port was relatively straightforward with the biggest
changing being the instructions generated around i128 rotl/rotr
primarily due to register changes.
* aarch64: Migrate ishl/ushr/sshr to ISLE
This commit migrates the `ishl`, `ushr`, and `sshr` instructions to
ISLE. These involve special cases for almost all types of integers
(including vectors) and helper functions for the i128 lowerings since
the i128 lowerings look to be used for other instructions as well. This
doesn't delete the i128 lowerings in the Rust code just yet because
they're still used by Rust lowerings, but they should be deletable in
due time once those lowerings are translated to ISLE.
* Use more descriptive names for i128 lowerings
* Use a with_flags-lookalike for csel
* Use existing `with_flags_*`
* Coment backwards order
* Update generated code
Uncovered by @bjorn3 (thanks!): 8- and 16-bit rotates were not working
properly in recent versions of Cranelift with part of the lowering
migrated to ISLE.
This PR fixes a few issues:
- 8- and 16-bit rotate-left needs to mask a constant amount, if any,
because we use a 32-bit rotate instruction and so don't get the
appropriate shift-amount masking for free from x86 semantics.
- `operand_size_from_type` was incorrect: it only handled 32- and 64-bit
types and silently returned `OperandSize::Size32` for everything else.
Now uses the `OperandSize::from_ty(ty)` helper as the pre-ISLE code
did.
Our test coverage for narrow value types is not great; this PR adds some
runtests for rotl/rotr but more would always be better!
Cranelift shuffles require indices to be in-bounds, which the
avx512-using backend also requires via a debug assert, so this commit
fixes a test with simd shuffles to only use in-bounds indices.
This is motivated by another failure on CI where the machine we were
running on presumably had avx512 things enabled. This should fix those
failures.
Closes#3581
* aarch64: Migrate some bit-ops to ISLE
This commit migrates these instructions to ISLE:
* `bnot`
* `band`
* `bor`
* `bxor`
* `band_not`
* `bor_not`
* `bxor_not`
The translations were relatively straightforward but the interesting
part here was trying to reduce the duplication between all these
instructions. I opted for a route that's similar to what the lowering
does today, having a `decl` which takes the `ALUOp` and then performs
further pattern matching internally. This enabled each instruction's
lowering to be pretty simple while we still get to handle all the fancy
cases of shifts, constants, etc, for each instruction.
* Actually delete previous lowerings
* Remove dead code
This commit migrates the sign/zero extension instructions from
`lower_inst.rs` to ISLE. There's actually a fair amount going on in this
migration since a few other pieces needed touching up along the way as
well:
* First is the actual migration of `uextend` and `sextend`. These
instructions are relatively simple but end up having a number of special
cases. I've attempted to replicate all the cases here but
double-checks would be good.
* This commit actually fixes a few issues where if the result of a vector
extraction is sign/zero-extended into i128 that actually results in
panics in the current backend.
* This commit adds exhaustive testing for
extension-of-a-vector-extraction is a noop wrt extraction.
* A bugfix around ISLE glue was required to get this commit working,
notably the case where the `RegMapper` implementation was trying to
map an input to an output (meaning ISLE was passing through an input
unmodified to the output) wasn't working. This requires a `mov`
instruction to be generated and this commit updates the glue to do
this. At the same time this commit updates the ISLE glue to share more
infrastructure between x64 and aarch64 so both backends get this fix
instead of just aarch64.
Overall I think that the translation to ISLE was a net benefit for these
instructions. It's relatively obvious what all the cases are now unlike
before where it took a few reads of the code and some boolean switches
to figure out which path was taken for each flavor of input. I think
there's still possible improvements here where, for example, the
`put_in_reg_{s,z}ext64` helper doesn't use this logic so technically
those helpers could also pattern match the "well atomic loads and vector
extractions automatically do this for us" but that's a possible future
improvement for later (and shouldn't be too too hard with some ISLE
refactoring).
* aarch64: Migrate {s,u}{div,rem} to ISLE
This commit migrates four different instructions at once to ISLE:
* `sdiv`
* `udiv`
* `srem`
* `urem`
These all share similar codegen and center around the `div` instruction
to use internally. The main feature of these was to model the manual
traps since the `div` instruction doesn't trap on overflow, instead
requiring manual checks to adhere to the semantics of the instruction
itself.
While I was here I went ahead and implemented an optimization for these
instructions when the right-hand-side is a constant with a known value.
For `udiv`, `srem`, and `urem` if the right-hand-side is a nonzero
constant then the checks for traps can be skipped entirely. For `sdiv`
if the constant is not 0 and not -1 then additionally all checks can be
elided. Finally if the right-hand-side of `sdiv` is -1 the zero-check is
elided, but it still needs a check for `i64::MIN` on the left-hand-side
and currently there's a TODO where `-1` is still checked too.
* Rebasing and review conflicts
* x64: expand FloatCC enum in ISLE
* isle: regenerate manifests
* isle: generate all enum fields in `clif.isle`
This expands the `gen_isle` function to write all of the immediate
`enum`s out explicitly in `clif.isle`. Non-`enum` immediates are still
`extern primitive`.
* Only compile `enum_values` with `rebuild-isle` feature
* Only compile `gen_enum_isle` with `rebuild-isle` feature
This register is not initialized, but we protect against its being used
by never allowing an iflags/fflags-typed value to be used with
`put_value_in_regs`. All `iflags`/`fflags` usages should be handled by
pattern-matching: e.g., `trapif` explicitly matches an `iadd_ifcout`
input.
Eventually (#3249) we need to simplify this by removing
iflags/fflags-tyepd values and using bool flags instead,
pattern-matching to get the same efficient lowerings as today. For now,
this allows the ISLE assertions to pass.
This documentation provides details for all of the ISLE language
features, and detailed rationale for why many of them are designed in
the way that they are. It is hopefully both a reasonable tutorial and
reference for someone looking to understand the DSL.
Note that this documentation is separate from and orthogonal to the
work to document the Cranelift bindings and integration work that
@fitzgen has covered well in #3556. This document can link to that one
and vice-versa once they are both in-tree.
