* Allow emitting u64 constants into constant pool.
* Use constant pool for constants on x64 that do not fit in a simm32 and are needed as a RegMem or RegMemImm.
* Fix rip-relative addressing bug in pinsrd emission.
This PR refactors the x64 backend address-mode lowering to use an
incremental-build approach, where it considers each node in a tree of
`iadd`s that feed into a load/store address and, at each step, builds
the best possible `Amode`. It will combine an arbitrary number of
constant offsets (an extension beyond the current rules), and can
capture a left-shifted (scaled) index in any position of the tree
(another extension).
This doesn't have any measurable performance improvement on our Wasm
benchmarks in Sightglass, unfortunately, because the IR lowered from
wasm32 will do address computation in 32 bits and then `uextend` it to
add to the 64-bit heap base. We can't quite lift the 32-bit adds to 64
bits because this loses the wraparound semantics.
(We could label adds as "expected not to overflow", and allow *those* to
be lifted to 64 bit operations; wasm32 heap address computation should
fit this. This is `add nuw` (no unsigned wrap) in LLVM IR terms. That's
likely my next step.)
Nevertheless, (i) this generalizes the cases we can handle, which should
be a good thing, all other things being equal (and in this case, no
compile time impact was measured); and (ii) might benefit non-Wasm
frontends.
This PR removes "argument polarity": the feature of ISLE extractors that lets them take
inputs aside from the value to be matched.
Cases that need this expressivity have been subsumed by #4072 with if-let clauses;
we can now finally remove this misfeature of the language, which has caused significant
confusion and has always felt like a bit of a hack.
This PR (i) removes the feature from the ISLE compiler; (ii) removes it from the reference
documentation; and (iii) refactors away all uses of the feature in our three existing
backends written in ISLE.
* Cranelift: fix#3953: rework single/multiple-use logic in lowering.
This PR addresses the longstanding issue with loads trying to merge
into compares on x86-64, and more generally, with the lowering
framework falsely recognizing "single uses" of one op by
another (which would normally allow merging of side-effecting ops like
loads) when there is *indirect* duplication.
To fix this, we replace the direct `value_uses` count with a
transitive notion of uniqueness (not unlike Rust's `&`/`&mut` and how
a `&mut` downgrades to `&` when accessed through another `&`!). A
value is used multiple times transitively if it has multiple direct
uses, or is used by another op that is used multiple times
transitively.
The canonical example of badness is:
```
v1 := load
v2 := ifcmp v1, ...
v3 := selectif v2, ...
v4 := selectif v2, ...
```
both `v3` and `v4` effectively merge the `ifcmp` (`v2`), so even
though the use of `v1` is "unique", it is codegenned twice. This is
why we ~~can't have nice things~~ can't merge loads into
compares (#3953).
There is quite a subtle and interesting design space around this
problem and how we might solve it. See the long doc-comment on
`ValueUseState` in this PR for more justification for the particular
design here. In particular, this design deliberately simplifies a bit
relative to an "optimal" solution: some uses can *become* unique
depending on merging, but we don't design our data structures for such
updates because that would require significant extra costly
tracking (some sort of transitive refcounting). For example, in the
above, if `selectif` somehow did not merge `ifcmp`, then we would only
codegen the `ifcmp` once into its result register (and use that
register twice); then the load *is* uniquely used, and could be
merged. But that requires transitioning from "multiple use" back to
"unique use" with careful tracking as we do pattern-matching, which
I've chosen to make out-of-scope here for now. In practice, I don't
think it will matter too much (and we can always improve later).
With this PR, we can now re-enable load-op merging for compares. A
subsequent commit does this.
* Update x64 backend to allow load-op merging for `cmp`.
* Update filetests.
* Add test for cmp-mem merging on x64.
* Comment fixes.
* Rework ValueUseState analysis for better performance.
* Update s390x filetest: iadd_ifcout cannot merge loads anymore because it has multiple outputs (ValueUseState limitation)
* Address review comments.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
This change moves the majority of the lowerings for CLIF's `load`
instruction over to ISLE. To do so, it also migrates the previous
mechanism for creating an `Amode` (`lower_to_amode`) to several ISLE
rules (see `to_amode`).
* x64: port GPR-held `icmp` to ISLE
* x64: port equality `icmp` for i128 type
* x64: port `icmp` for vector types
* x64: rename from_intcc to intcc_to_cc
* x64: port `select` using an FP comparison to ISLE
This change includes quite a few interlocking parts, required mainly by
the current x64 conventions in ISLE:
- it adds a way to emit a `cmove` with multiple OR-ing conditions;
because x64 ISLE cannot currently safely emit a comparison followed
by several jumps, this adds `MachInst::CmoveOr` and
`MachInst::XmmCmoveOr` macro instructions. Unfortunately, these macro
instructions hide the multi-instruction sequence in `lower.isle`
- to properly keep track of what instructions consume and produce
flags, @cfallin added a way to pass around variants of
`ConsumesFlags` and `ProducesFlags`--these changes affect all
backends
- then, to lower the `fcmp + select` CLIF, this change adds several
`cmove*_from_values` helpers that perform all of the awkward
conversions between `Value`, `ValueReg`, `Reg`, and `Gpr/Xmm`; one
upside is that now these lowerings have much-improved documentation
explaining why the various `FloatCC` and `CC` choices are made the
the way they are.
Co-authored-by: Chris Fallin <chris@cfallin.org>
We already defined the `Gpr` newtype and used it in a few places, and we already
defined the `Xmm` newtype and used it extensively. This finishes the transition
to using the newtypes extensively in lowering by making use of `Gpr` in more
places.
Fixes#3685
This primary motivation of this large commit (apologies for its size!) is to
introduce `Gpr` and `Xmm` newtypes over `Reg`. This should help catch
difficult-to-diagnose register class mixup bugs in x64 lowerings.
But having a newtype for `Gpr` and `Xmm` themselves isn't enough to catch all of
our operand-with-wrong-register-class bugs, because about 50% of operands on x64
aren't just a register, but a register or memory address or even an
immediate! So we have `{Gpr,Xmm}Mem[Imm]` newtypes as well.
Unfortunately, `GprMem` et al can't be `enum`s and are therefore a little bit
noisier to work with from ISLE. They need to maintain the invariant that their
registers really are of the claimed register class, so they need to encapsulate
the inner data. If they exposed the underlying `enum` variants, then anyone
could just change register classes or construct a `GprMem` that holds an XMM
register, defeating the whole point of these newtypes. So when working with
these newtypes from ISLE, we rely on external constructors like `(gpr_to_gpr_mem
my_gpr)` instead of `(GprMem.Gpr my_gpr)`.
A bit of extra lines of code are included to add support for register mapping
for all of these newtypes as well. Ultimately this is all a bit wordier than I'd
hoped it would be when I first started authoring this commit, but I think it is
all worth it nonetheless!
In the process of adding these newtypes, I didn't want to have to update both
the ISLE `extern` type definition of `MInst` and the Rust definition, so I move
the definition fully into ISLE, similar as aarch64.
Finally, this process isn't complete. I've introduced the newtypes here, and
I've made most XMM-using instructions switch from `Reg` to `Xmm`, as well as
register class-converting instructions, but I haven't moved all of the GPR-using
instructions over to the newtypes yet. I figured this commit was big enough as
it was, and I can continue the adoption of these newtypes in follow up commits.
Part of #3685.
Even though the implementation of emit and emit_safepoint may
be platform-specific, the interface ought to be common so that
other code in prelude.isle may safely call these constructors.
This patch moves the definition of emit (from all platforms)
and emit_safepoint (s390x only) to prelude.isle. This required
adding an emit_safepoint implementation to aarch64 and x64 as
well - the latter is still a stub as special move mitosis
handling will be required.
Change the implementation of emitted_insts in IsleContext from
a plain vector of instructions into a vector of tuples, where
the second element is a boolean that indicates whether this
instruction should be emitted as a safepoint.
This allows targets to emit safepoint insns via ISLE.
In preparing to move the s390x back-end to ISLE, I noticed a few
missing pieces in the common prelude code. This patch:
- Defines the reference types $R32 / $R64.
- Provides a trap_code_bad_conversion_to_integer helper.
- Provides an avoid_div_traps helper. This requires passing the
generic flags in addition to the ISA-specifc flags into the
ISLE lowering context.
Uncovered by @bjorn3 (thanks!): 8- and 16-bit rotates were not working
properly in recent versions of Cranelift with part of the lowering
migrated to ISLE.
This PR fixes a few issues:
- 8- and 16-bit rotate-left needs to mask a constant amount, if any,
because we use a 32-bit rotate instruction and so don't get the
appropriate shift-amount masking for free from x86 semantics.
- `operand_size_from_type` was incorrect: it only handled 32- and 64-bit
types and silently returned `OperandSize::Size32` for everything else.
Now uses the `OperandSize::from_ty(ty)` helper as the pre-ISLE code
did.
Our test coverage for narrow value types is not great; this PR adds some
runtests for rotl/rotr but more would always be better!
This commit migrates the sign/zero extension instructions from
`lower_inst.rs` to ISLE. There's actually a fair amount going on in this
migration since a few other pieces needed touching up along the way as
well:
* First is the actual migration of `uextend` and `sextend`. These
instructions are relatively simple but end up having a number of special
cases. I've attempted to replicate all the cases here but
double-checks would be good.
* This commit actually fixes a few issues where if the result of a vector
extraction is sign/zero-extended into i128 that actually results in
panics in the current backend.
* This commit adds exhaustive testing for
extension-of-a-vector-extraction is a noop wrt extraction.
* A bugfix around ISLE glue was required to get this commit working,
notably the case where the `RegMapper` implementation was trying to
map an input to an output (meaning ISLE was passing through an input
unmodified to the output) wasn't working. This requires a `mov`
instruction to be generated and this commit updates the glue to do
this. At the same time this commit updates the ISLE glue to share more
infrastructure between x64 and aarch64 so both backends get this fix
instead of just aarch64.
Overall I think that the translation to ISLE was a net benefit for these
instructions. It's relatively obvious what all the cases are now unlike
before where it took a few reads of the code and some boolean switches
to figure out which path was taken for each flavor of input. I think
there's still possible improvements here where, for example, the
`put_in_reg_{s,z}ext64` helper doesn't use this logic so technically
those helpers could also pattern match the "well atomic loads and vector
extractions automatically do this for us" but that's a possible future
improvement for later (and shouldn't be too too hard with some ISLE
refactoring).
* aarch64: Migrate {s,u}{div,rem} to ISLE
This commit migrates four different instructions at once to ISLE:
* `sdiv`
* `udiv`
* `srem`
* `urem`
These all share similar codegen and center around the `div` instruction
to use internally. The main feature of these was to model the manual
traps since the `div` instruction doesn't trap on overflow, instead
requiring manual checks to adhere to the semantics of the instruction
itself.
While I was here I went ahead and implemented an optimization for these
instructions when the right-hand-side is a constant with a known value.
For `udiv`, `srem`, and `urem` if the right-hand-side is a nonzero
constant then the checks for traps can be skipped entirely. For `sdiv`
if the constant is not 0 and not -1 then additionally all checks can be
elided. Finally if the right-hand-side of `sdiv` is -1 the zero-check is
elided, but it still needs a check for `i64::MIN` on the left-hand-side
and currently there's a TODO where `-1` is still checked too.
* Rebasing and review conflicts
This also fixes a bug where `movsd` was incorrectly used with a memory
operand for `insertlane`, causing it to actually zero the upper bits
instead of preserving them.
Note that the insertlane logic still exists in `lower.rs` because it's
used as a helper for a few other instruction lowerings which aren't
migrated to ISLE yet. This commit also adds a helper in ISLE itself for
those other lowerings to use when they get implemented.
Closes#3216
* aarch64: Initial work to transition backend to ISLE
This commit is what is hoped to be the initial commit towards migrating
the aarch64 backend to ISLE. There's seemingly a lot of changes here but
it's intended to largely be code motion. The current thinking is to
closely follow the x64 backend for how all this is handled and
organized.
Major changes in this PR are:
* The `Inst` enum is now defined in ISLE. This avoids having to define
it in two places (once in Rust and once in ISLE). I've preserved all
the comments in the ISLE and otherwise this isn't actually a
functional change from the Rust perspective, it's still the same enum
according to Rust.
* Lots of little enums and things were moved to ISLE as well. As with
`Inst` their definitions didn't change, only where they're defined.
This will give future ISLE PRs access to all these operations.
* Initial code for lowering `iconst`, `null`, and `bconst` are
implemented. Ironically none of this is actually used right now
because constant lowering is handled in `put_input_in_regs` which
specially handles constants. Nonetheless I wanted to get at least
something simple working which shows off how to special case various
things that are specific to AArch64. In a future PR I plan to hook up
const-lowering in ISLE to this path so even though
`iconst`-the-clif-instruction is never lowered this should use the
const lowering defined in ISLE rather than elsewhere in the backend
(eventually leading to the deletion of the non-ISLE lowering).
* The `IsleContext` skeleton is created and set up for future additions.
* Some code for ISLE that's shared across all backends now lives in
`isle_prelude_methods!()` and is deduplicated between the AArch64
backend and the x64 backend.
* Register mapping is tweaked to do the same thing for AArch64 that it
does for x64. Namely mapping virtual registers is supported instead of
just virtual to machine registers.
My main goal with this PR was to get AArch64 into a place where new
instructions can be added with relative ease. Additionally I'm hoping to
figure out as part of this change how much to share for ISLE between
AArch64 and x64 (and other backends).
* Don't use priorities with rules
* Update .gitattributes with concise syntax
* Deduplicate some type definitions
* Rebuild ISLE
* Move isa::isle to machinst::isle
This moves the `f32const` and `f64const` instructions from `lower.rs` to
ISLE. I was originally going to add something else but due to the
`isle.rs`'s manual use of `constructor_imm(..)` it necessitated filling
out the `imm` cases for f32/f64 constants, so I figured I'd go ahead and
move these instructions as well.
The special case for 0 constants which use `xorp{s,d}` is preserved from
`lower.rs` today, but a special case isn't added for the all-ones
constant. The comment says to use `cmpeqp{s,d}` but as discovered on
other recent PRs that's not quite sufficient because comparing a
register against itself which happens to be NaN wouldn't work, so
something else will be required (perhaps `pcmpeq` or similar? I figured
I'd defer to later)
This was my first attempt at transitioning code to ISLE to originally
fix#3327 but that fix has since landed on `main`, so this is instead
now just porting a few operations to ISLE.
Closes#3336
On the build side, this commit introduces two things:
1. The automatic generation of various ISLE definitions for working with
CLIF. Specifically, it generates extern type definitions for clif opcodes and
the clif instruction data `enum`, as well as extractors for matching each clif
instructions. This happens inside the `cranelift-codegen-meta` crate.
2. The compilation of ISLE DSL sources to Rust code, that can be included in the
main `cranelift-codegen` compilation.
Next, this commit introduces the integration glue code required to get
ISLE-generated Rust code hooked up in clif-to-x64 lowering. When lowering a clif
instruction, we first try to use the ISLE code path. If it succeeds, then we are
done lowering this instruction. If it fails, then we proceed along the existing
hand-written code path for lowering.
Finally, this commit ports many lowering rules over from hand-written,
open-coded Rust to ISLE.
In the process of supporting ISLE, this commit also makes the x64 `Inst` capable
of expressing SSA by supporting 3-operand forms for all of the existing
instructions that only have a 2-operand form encoding:
dst = src1 op src2
Rather than only the typical x86-64 2-operand form:
dst = dst op src
This allows `MachInst` to be in SSA form, since `dst` and `src1` are
disentangled.
("3-operand" and "2-operand" are a little bit of a misnomer since not all
operations are binary operations, but we do the same thing for, e.g., unary
operations by disentangling the sole operand from the result.)
There are two motivations for this change:
1. To allow ISLE lowering code to have value-equivalence semantics. We want ISLE
lowering to translate a CLIF expression that evaluates to some value into a
`MachInst` expression that evaluates to the same value. We want both the
lowering itself and the resulting `MachInst` to be pure and referentially
transparent. This is both a nice paradigm for compiler writers that are
authoring and maintaining lowering rules and is a prerequisite to any sort of
formal verification of our lowering rules in the future.
2. Better align `MachInst` with `regalloc2`'s API, which requires that the input
be in SSA form.
