* Cranelift: Use a single, shared vector allocation for all `ABIArg`s
Instead of two `SmallVec`s per `SigData`.
* Remove `Deref` and `DerefMut` impls for `ArgsAccumulator`
This can help rustc/llvm avoid bounds checks, but more importantly I will have
future changes here that remove indexing of params, and instead hand them out as
an iterator.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Cranelift: use regalloc2 constraints on caller side of ABI code.
This PR updates the shared ABI code and backends to use register-operand
constraints rather than explicit pinned-vreg moves for register
arguments and return values.
The s390x backend was not updated, because it has its own implementation
of ABI code. Ideally we could converge back to the code shared by x64
and aarch64 (which didn't exist when s390x ported calls to ISLE, so the
current situation is underestandable, to be clear!). I'll leave this for
future work.
This PR exposed several places where regalloc2 needed to be a bit more
flexible with constraints; it requires regalloc2#74 to be merged and
pulled in.
* Update to regalloc2 0.3.3.
In addition to version bump, this required removing two asserts as
`SpillSlot`s no longer carry their class (so we can't assert that they
have the correct class).
* Review comments.
* Filetest updates.
* Add cargo-vet audit for regalloc2 0.3.2 -> 0.3.3 upgrade.
* Update to regalloc2 0.4.0.
* s390x: update some regalloc metadata to remove use of `reg_mod`.
This is a step toward ultimately removing modify-operands, which along
with removal of pinned vregs, lets us move to a completely
constraint-based and fully-SSA regalloc input and get some nice
advantages eventually.
There are still a few uses of `mod` operands and pinned vregs remaining,
especially around the "regpair" abstraction. Those proved to be a bit
trickier to update though, so will have to be done separately.
* Review feedback: restore two-arg pretty-print form.
* Review feedback.
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
* Cranelift: Remove `ABICallee` trait
It has only one implementation: the `ABICalleeImpl` struct. By using that
directly we can avoid unnecessary layers of generics and abstractions as well as
a couple `Box`es that were previously putting the single implementation into a
`Box<dyn>`.
* Cranelift: Rename `ABICalleeImpl` to `AbiCallee`
* Fix comments as per review
* Rename `AbiCallee` to `Callee`
This adds full i128 support to the s390x target, including new filetests
and enabling the existing i128 runtest on s390x.
The ABI requires that i128 is passed and returned via implicit pointer,
but the front end still generates direct i128 types in call. This means
we have to implement ABI support to implicitly convert i128 types to
pointers when passing arguments.
To do so, we add a new variant ABIArg::ImplicitArg. This acts like
StructArg, except that the value type is the actual target type,
not a pointer type. The required conversions have to be inserted
in the prologue and at function call sites.
Note that when dereferencing the implicit pointer in the prologue,
we may require a temp register: the pointer may be passed on the
stack so it needs to be loaded first, but the value register may
be in the wrong class for pointer values. In this case, we use
the "stack limit" register, which should be available at this
point in the prologue.
For return values, we use a mechanism similar to the one used for
supporting multiple return values in the Wasmtime ABI. The only
difference is that the hidden pointer to the return buffer must
be the *first*, not last, argument in this case.
(This implements the second half of issue #4565.)
This adds support for StructArgument on s390x. The ABI for this
platform requires that the address of the buffer holding the copy
of the struct argument is passed from caller to callee as hidden
pointer, using a register or overflow stack slot.
To implement this, I've added an optional "pointer" filed to
ABIArg::StructArg, and code to handle the pointer both in common
abi_impl code and the s390x back-end.
One notable change necessary to make this work involved the
"copy_to_arg_order" mechanism. Currently, for struct args
we only need to copy the data (and that need to happen before
setting up any other args), while for non-struct args we only
need to set up the appropriate registers or stack slots.
This order is ensured by sorting the arguments appropriately
into a "copy_to_arg_order" list.
However, for struct args with explicit pointers we need to *both*
copy the data (again, before everything else), *and* set up a
register or stack slot. Since we now need to touch the argument
twice, we cannot solve the ordering problem by a simple sort.
Instead, the abi_impl common code now provided *two* callbacks,
emit_copy_regs_to_buffer and emit_copy_regs_to_arg, and expects
the back end to first call copy..to_buffer for all args, and
then call copy.._to_arg for all args. This required updates
to all back ends.
In the s390x back end, in addition to the new ABI code, I'm now
adding code to actually copy the struct data, using the MVC
instruction (for small buffers) or a memcpy libcall (for larger
buffers). This also requires a bit of new infrastructure:
- MVC is the first memory-to-memory instruction we use, which
needed a bit of memory argument tweaking
- We also need to set up the infrastructure to emit libcalls.
(This implements the first half of issue #4565.)
Give the user the option to sign and to authenticate function
return addresses with the operations introduced by the Pointer
Authentication extension to the Arm instruction set architecture.
Copyright (c) 2021, Arm Limited.
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
On s390x, we do not have a frame pointer that can be used to chain
stack frames for easy unwinding. Instead, our ABI defines a stack
"backchain" mechanism that can be used to the same effect.
This PR uses that backchain mechanism to implement the new
preserve_frame_pointers flags introduced here:
https://github.com/bytecodealliance/wasmtime/pull/4469
This adds full support for all Cranelift SIMD instructions
to the s390x target. Everything is matched fully via ISLE.
In addition to adding support for many new instructions,
and the lower.isle code to match all SIMD IR patterns,
this patch also adds ABI support for vector types.
In particular, we now need to handle the fact that
vector registers 8 .. 15 are partially callee-saved,
i.e. the high parts of those registers (which correspond
to the old floating-poing registers) are callee-saved,
but the low parts are not. This is the exact same situation
that we already have on AArch64, and so this patch uses the
same solution (the is_included_in_clobbers callback).
The bulk of the changes are platform-specific, but there are
a few exceptions:
- Added ISLE extractors for the Immediate and Constant types,
to enable matching the vconst and swizzle instructions.
- Added a missing accessor for call_conv to ABISig.
- Fixed endian conversion for vector types in data_value.rs
to enable their use in runtests on the big-endian platforms.
- Enabled (nearly) all SIMD runtests on s390x. [ Two test cases
remain disabled due to vector shift count semantics, see below. ]
- Enabled all Wasmtime SIMD tests on s390x.
There are three minor issues, called out via FIXMEs below,
which should be addressed in the future, but should not be
blockers to getting this patch merged. I've opened the
following issues to track them:
- Vector shift count semantics
https://github.com/bytecodealliance/wasmtime/issues/4424
- is_included_in_clobbers vs. link register
https://github.com/bytecodealliance/wasmtime/issues/4425
- gen_constant callback
https://github.com/bytecodealliance/wasmtime/issues/4426
All tests, including all newly enabled SIMD tests, pass
on both z14 and z15 architectures.
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
This defines the full set of 32 128-bit vector registers on s390x.
(Note that the VRs overlap the existing FPRs.) In addition, this
adds support to use all 32 vector registers to implement floating-
point operations, by using vector floating-point instructions with
the 'W' bit set to operate only on the first element.
This part of the vector instruction set mostly matches the old FP
instruction set, with two exceptions:
- There is no vector version of the COPY SIGN instruction. Instead,
now use a VECTOR SELECT with an appropriate bit mask to implement
the fcopysign operation.
- There are no vector version of the float <-> int conversion
instructions where source and target differ in bit size. Use
appropriate multiple conversion steps instead. This also requires
use of explicit checking to implement correct overflow handling.
As a side effect, this version now also implements the i8 / i16
variants of all conversions, which had been missing so far.
For all operations except those two above, we continue to use the
old FP instruction if applicable (i.e. if all operands happen to
have been allocated to the original FP register set), and use the
vector instruction otherwise.
This adds infrastructure to allow implementing call and return
instructions in ISLE, and migrates the s390x back-end.
To implement ABI details, this patch creates public accessors
for `ABISig` and makes them accessible in ISLE. All actual
code generation is then done in ISLE rules, following the
information provided by that signature.
[ Note that the s390x back end never requires multiple slots for
a single argument - the infrastructure to handle this should
already be present, however. ]
To implement loops in ISLE rules, this patch uses regular tail
recursion, employing a `Range` data structure holding a range
of integers to be looped over.
- Handle call instructions' clobbers with the clobbers API, using RA2's
clobbers bitmask (bytecodealliance/regalloc2#58) rather than clobbers
list;
- Pull in changes from bytecodealliance/regalloc2#59 for much more sane
edge-case behavior w.r.t. liverange splitting.
Previously, the pinned register (enabled by the `enable_pinned_reg`
Cranelift setting and used via the `get_pinned_reg` and `set_pinned_reg`
CLIF ops) was only used when Cranelift was embedded in SpiderMonkey, in
order to support a pinned heap register. SpiderMonkey has its own
calling convention in Cranelift (named after the integration layer,
"Baldrdash").
However, the feature is more general, and should be usable with the
default system calling convention too, e.g. SysV or Windows Fastcall.
This PR fixes the ABI code to properly treat the pinned register as a
globally allocated register -- and hence an implicit input and output to
every function, not saved/restored in the prologue/epilogue -- for SysV
on x86-64 and aarch64, and Fastcall on x86-64.
Fixes#4170.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
In preparing the back-end to move to ISLE, I detected a
number of codegen bugs in the existing code, which are
fixed here:
- Fix internal compiler error with uload16/icmp corner case.
- Fix broken Cls lowering.
- Correctly mask shift count for i8/i16 shifts.
In addition, I made several changes to operand encodings
in various MInst patterns. These should not have any
functional effect, but will make the ISLE migration easier:
- Encode floating-point constants as u32/u64 in MInst patterns.
- Encode shift amounts as u8 and Reg in ShiftOp pattern.
- Use MemArg in LoadMultiple64 and StoreMultiple64 patterns.
This patch makes spillslot allocation, spilling and reloading all based
on register class only. Hence when we have a 32- or 64-bit value in a
128-bit XMM register on x86-64 or vector register on aarch64, this
results in larger spillslots and spills/restores.
Why make this change, if it results in less efficient stack-frame usage?
Simply put, it is safer: there is always a risk when allocating
spillslots or spilling/reloading that we get the wrong type and make the
spillslot or the store/load too small. This was one contributing factor
to CVE-2021-32629, and is now the source of a fuzzbug in SIMD code that
puns an arbitrary user-controlled vector constant over another
stackslot. (If this were a pointer, that could result in RCE. SIMD is
not yet on by default in a release, fortunately.
In particular, we have not been particularly careful about using moves
between values of different types, for example with `raw_bitcast` or
with certain SIMD operations, and such moves indicate to regalloc.rs
that vregs are in equivalence classes and some arbitrary vreg in the
class is provided when allocating the spillslot or spilling/reloading.
Since regalloc.rs does not track actual type, and since we haven't been
careful about moves, we can't really trust this "arbitrary vreg in
equivalence class" to provide accurate type information.
In the fix to CVE-2021-32629 we fixed this for integer registers by
always spilling/reloading 64 bits; this fix can be seen as the analogous
change for FP/vector regs.
* Support full set of ADD LOGICAL / SUBTRACT LOGICAL instructions
* Full implementation of IaddIfcout lowering
* Enable most memory64 tests (except simd and threads)
* Cranelift AArch64: Simplify leaf functions that do not use the stack
Leaf functions that do not use the stack (e.g. do not clobber any
callee-saved registers) do not need a frame record.
Copyright (c) 2021, Arm Limited.
This adds support for the IBM z/Architecture (s390x-ibm-linux).
The status of the s390x backend in its current form is:
- Wasmtime is fully functional and passes all tests on s390x.
- All back-end features supported, with the exception of SIMD.
- There is still a lot of potential for performance improvements.
- Currently the only supported processor type is z15.
