This re-factoring replaces uses of `Inst::mov_r_m` with `Inst::store` to ensure there is only one code location to troubleshoot when generating store instructions for a specific type.
Previously, `Inst::store` only understood a subset of the scalar types, which resulted in failures seen in #2826. This change allows `Inst::store` to generate instructions for all scalar widths (`8 | 16 | 32 | 64`) since all of these are supported in the emission code of `Inst::MovRM`.
SIMD & FP registers are now saved and restored in pairs, similarly
to general-purpose registers. Also, only the bottom 64 bits of the
registers are saved and restored (in case of non-Baldrdash ABIs),
which is the requirement from the Procedure Call Standard for the
Arm 64-bit Architecture.
As for the callee-saved general-purpose registers, if a procedure
needs to save and restore an odd number of them, it no longer uses
store and load pair instructions for the last register.
Copyright (c) 2021, Arm Limited.
Because there are instructions that are present in more than one ISA feature set, we need to see if any of the ISA requirements match before emitting. This change includes the `VPABSQ` instruction as an example, which is present in both `AVX512F` and `AVX512VL`.
* Fully support multiple returns in Wasmtime
For quite some time now Wasmtime has "supported" multiple return values,
but only in the mose bare bones ways. Up until recently you couldn't get
a typed version of functions with multiple return values, and never have
you been able to use `Func::wrap` with functions that return multiple
values. Even recently where `Func::typed` can call functions that return
multiple values it uses a double-indirection by calling a trampoline
which calls the real function.
The underlying reason for this lack of support is that cranelift's ABI
for returning multiple values is not possible to write in Rust. For
example if a wasm function returns two `i32` values there is no Rust (or
C!) function you can write to correspond to that. This commit, however
fixes that.
This commit adds two new ABIs to Cranelift: `WasmtimeSystemV` and
`WasmtimeFastcall`. The intention is that these Wasmtime-specific ABIs
match their corresponding ABI (e.g. `SystemV` or `WindowsFastcall`) for
everything *except* how multiple values are returned. For multiple
return values we simply define our own version of the ABI which Wasmtime
implements, which is that for N return values the first is returned as
if the function only returned that and the latter N-1 return values are
returned via an out-ptr that's the last parameter to the function.
These custom ABIs provides the ability for Wasmtime to bind these in
Rust meaning that `Func::wrap` can now wrap functions that return
multiple values and `Func::typed` no longer uses trampolines when
calling functions that return multiple values. Although there's lots of
internal changes there's no actual changes in the API surface area of
Wasmtime, just a few more impls of more public traits which means that
more types are supported in more places!
Another change made with this PR is a consolidation of how the ABI of
each function in a wasm module is selected. The native `SystemV` ABI,
for example, is more efficient at returning multiple values than the
wasmtime version of the ABI (since more things are in more registers).
To continue to take advantage of this Wasmtime will now classify some
functions in a wasm module with the "fast" ABI. Only functions that are
not reachable externally from the module are classified with the fast
ABI (e.g. those not exported, used in tables, or used with `ref.func`).
This should enable purely internal functions of modules to have a faster
calling convention than those which might be exposed to Wasmtime itself.
Closes#1178
* Tweak some names and add docs
* "fix" lightbeam compile
* Fix TODO with dummy environ
* Unwind info is a property of the target, not the ABI
* Remove lightbeam unused imports
* Attempt to fix arm64
* Document new ABIs aren't stable
* Fix filetests to use the right target
* Don't always do 64-bit stores with cranelift
This was overwriting upper bits when 32-bit registers were being stored
into return values, so fix the code inline to do a sized store instead
of one-size-fits-all store.
* At least get tests passing on the old backend
* Fix a typo
* Add some filetests with mixed abi calls
* Get `multi` example working
* Fix doctests on old x86 backend
* Add a mixture of wasmtime/system_v tests
This PR switches the default backend on x86, for both the
`cranelift-codegen` crate and for Wasmtime, to the new
(`MachInst`-style, `VCode`-based) backend that has been under
development and testing for some time now.
The old backend is still available by default in builds with the
`old-x86-backend` feature, or by requesting `BackendVariant::Legacy`
from the appropriate APIs.
As part of that switch, it adds some more runtime-configurable plumbing
to the testing infrastructure so that tests can be run using the
appropriate backend. `clif-util test` is now capable of parsing a
backend selector option from filetests and instantiating the correct
backend.
CI has been updated so that the old x86 backend continues to run its
tests, just as we used to run the new x64 backend separately.
At some point, we will remove the old x86 backend entirely, once we are
satisfied that the new backend has not caused any unforeseen issues and
we do not need to revert.
In preparation for adding new encoding modes to the x64 backend (e.g. VEX,
EVEX), this change moves all of the current instruction encoding functions to
`encodings::rex`. This refactor does not change any logic.
This commit changes how both the shared flags and ISA flags are stored in the
serialized module to detect incompatibilities when a serialized module is
instantiated.
It improves the error reporting when a compiled module has mismatched shared
flags.
This commit adds the `wasmtime settings` command to print out available
Cranelift settings for a target (defaults to the host).
The compile command has been updated to remove the Cranelift ISA options in
favor of encouraging users to use `wasmtime settings` to discover what settings
are available. This will reduce the maintenance cost for syncing the compile
command with Cranelift ISA flags.
This commit adds a `compile` command to the Wasmtime CLI.
The command can be used to Ahead-Of-Time (AOT) compile WebAssembly modules.
With the `all-arch` feature enabled, AOT compilation can be performed for
non-native architectures (i.e. cross-compilation).
The `Module::compile` method has been added to perform AOT compilation.
A few of the CLI flags relating to "on by default" Wasm features have been
changed to be "--disable-XYZ" flags.
A simple example of using the `wasmtime compile` command:
```text
$ wasmtime compile input.wasm
$ wasmtime input.cwasm
```
* Use stable Rust on CI to test the x64 backend
This commit leverages the newly-released 1.51.0 compiler to test the
new backend on Windows and Linux with a stable compiler instead of a
nightly compiler. This isolates the nightly build to just the nightly
documentation generation and fuzzing, both of which rely on nightly for
the best results right now.
* Use updated stable in book build job
* Run rustfmt for new stable
* Silence new warnings for wasi-nn
* Allow some dead code in the x64 backend
Looks like new rustc is better about emitting some dead-code warnings
* Update rust in peepmatic job
* Fix a test in the pooling allocator
* Remove `package.metdata.docs.rs` temporarily
Needs resolution of https://github.com/rust-lang/cargo/pull/9300 first
* Fix a warning in a wasi-nn example
The codegen for div/rem ops has two modes, depending on the
`avoid_div_traps` flag: it can either do all checks for trapping
conditions explicitly, and use explicit trap instructions, then use a
hardware divide instruction that will not trap (`avoid_div_traps ==
true`); or it can run in a mode where a hardware FP fault on the divide
instruction implies a Wasm trap (`avoid_div_traps == false`). Wasmtime
uses the former while Lucet (for example) uses the latter.
It turns out that because we run all our spec tests run under Wasmtime,
we missed a spec corner case that fails in the latter: INT_MIN % -1 == 0
per the spec, but causes a trap with the x86 signed divide/remainder
instruction. Hence, in Lucet, this specific remainder computation would
incorrectly result in a Wasm trap.
This PR fixes the issue by just forcing use of the explicit-checks
implementation for `srem` even when `avoid_div_traps` is false.
This logging step may be quite expensive, since logging has never been
optimized at all. Removing it is a clear win in compile times on my
machine for a large wasm module, for which parallel compilation is
lowering from 6 seconds to 1.5 seconds.
Co-authored-by: bjorn3 <bjorn3@users.noreply.github.com>
This bumps target-lexicon and adds support for the AppleAarch64 calling
convention. Specifically for WebAssembly support, we only have to worry
about the new stack slots convention. Stack slots don't need to be at
least 8-bytes, they can be as small as the data type's size. For
instance, if we need stack slots for (i32, i32), they can be located at
offsets (+0, +4). Note that they still need to be properly aligned on
the data type they're containing, though, so if we need stack slots for
(i32, i64), we can't start the i64 slot at the +4 offset (it must start
at the +8 offset).
Added one test that was failing on the Mac M1, as well as other tests
stressing different yet similar situations.
* Switch macOS to using mach ports for trap handling
This commit moves macOS to using mach ports instead of signals for
handling traps. The motivation for this is listed in #2456, namely that
once mach ports are used in a process that means traditional UNIX signal
handlers won't get used. This means that if Wasmtime is integrated with
Breakpad, for example, then Wasmtime's trap handler never fires and
traps don't work.
The `traphandlers` module is refactored as part of this commit to split
the platform-specific bits into their own files (it was growing quite a
lot for one inline `cfg_if!`). The `unix.rs` and `windows.rs` files
remain the same as they were before with a few minor tweaks for some
refactored interfaces. The `macos.rs` file is brand new and lifts almost
its entire implementation from SpiderMonkey, adapted for Wasmtime
though.
The main gotcha with mach ports is that a separate thread is what
services the exception. Some unsafe magic allows this separate thread to
read non-`Send` and temporary state from other threads, but is hoped to
be safe in this context. The unfortunate downside is that calling wasm
on macOS now involves taking a global lock and modifying a global hash
map twice-per-call. I'm not entirely sure how to get out of this cost
for now, but hopefully for any embeddings on macOS it's not the end of
the world.
Closes#2456
* Add a sketch of arm64 apple support
* store: maintain CallThreadState mapping when switching fibers
* cranelift/aarch64: generate unwind directives to disable pointer auth
Aarch64 post ARMv8.3 has a feature called pointer authentication,
designed to fight ROP/JOP attacks: some pointers may be signed using new
instructions, adding payloads to the high (previously unused) bits of
the pointers. More on this here: https://lwn.net/Articles/718888/
Unwinders on aarch64 need to know if some pointers contained on the call
frame contain an authentication code or not, to be able to properly
authenticate them or use them directly. Since native code may have
enabled it by default (as is the case on the Mac M1), and the default is
that this configuration value is inherited, we need to explicitly
disable it, for the only kind of supported pointers (return addresses).
To do so, we set the value of a non-existing dwarf pseudo register (34)
to 0, as documented in
https://github.com/ARM-software/abi-aa/blob/master/aadwarf64/aadwarf64.rst#note-8.
This is done at the function granularity, in the spirit of Cranelift
compilation model. Alternatively, a single directive could be generated
in the CIE, generating less information per module.
* Make exception handling work on Mac aarch64 too
* fibers: use a breakpoint instruction after the final call in wasmtime_fiber_start
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
This commit enables Cranelift's AArch64 backend to generate code
for instruction set extensions (previously only the base Armv8-A
architecture was supported); also, it makes it possible to detect
the extensions supported by the host when JIT compiling. The new
functionality is applied to the IR instruction `AtomicCas`.
Copyright (c) 2021, Arm Limited.
Our previous implementation of unwind infrastructure was somewhat
complex and brittle: it parsed generated instructions in order to
reverse-engineer unwind info from prologues. It also relied on some
fragile linkage to communicate instruction-layout information that VCode
was not designed to provide.
A much simpler, more reliable, and easier-to-reason-about approach is to
embed unwind directives as pseudo-instructions in the prologue as we
generate it. That way, we can say what we mean and just emit it
directly.
The usual reasoning that leads to the reverse-engineering approach is
that metadata is hard to keep in sync across optimization passes; but
here, (i) prologues are generated at the very end of the pipeline, and
(ii) if we ever do a post-prologue-gen optimization, we can treat unwind
directives as black boxes with unknown side-effects, just as we do for
some other pseudo-instructions today.
It turns out that it was easier to just build this for both x64 and
aarch64 (since they share a factored-out ABI implementation), and wire
up the platform-specific unwind-info generation for Windows and SystemV.
Now we have simpler unwind on all platforms and we can delete the old
unwind infra as soon as we remove the old backend.
There were a few consequences to supporting Fastcall unwind in
particular that led to a refactor of the common ABI. Windows only
supports naming clobbered-register save locations within 240 bytes of
the frame-pointer register, whatever one chooses that to be (RSP or
RBP). We had previously saved clobbers below the fixed frame (and below
nominal-SP). The 240-byte range has to include the old RBP too, so we're
forced to place clobbers at the top of the frame, just below saved
RBP/RIP. This is fine; we always keep a frame pointer anyway because we
use it to refer to stack args. It does mean that offsets of fixed-frame
slots (spillslots, stackslots) from RBP are no longer known before we do
regalloc, so if we ever want to index these off of RBP rather than
nominal-SP because we add support for `alloca` (dynamic frame growth),
then we'll need a "nominal-BP" mode that is resolved after regalloc and
clobber-save code is generated. I added a comment to this effect in
`abi_impl.rs`.
The above refactor touched both x64 and aarch64 because of shared code.
This had a further effect in that the old aarch64 prologue generation
subtracted from `sp` once to allocate space, then used stores to `[sp,
offset]` to save clobbers. Unfortunately the offset only has 7-bit
range, so if there are enough clobbered registers (and there can be --
aarch64 has 384 bytes of registers; at least one unit test hits this)
the stores/loads will be out-of-range. I really don't want to synthesize
large-offset sequences here; better to go back to the simpler
pre-index/post-index `stp r1, r2, [sp, #-16]` form that works just like
a "push". It's likely not much worse microarchitecturally (dependence
chain on SP, but oh well) and it actually saves an instruction if
there's no other frame to allocate. As a further advantage, it's much
simpler to understand; simpler is usually better.
This PR adds the new backend on Windows to CI as well.
This adds support for the "fastcall" ABI, which is the native C/C++ ABI
on Windows platforms on x86-64. It is similar to but not exactly like
System V; primarily, its argument register assignments are different,
and it requires stack shadow space.
Note that this also adjusts the handling of multi-register values in the
shared ABI implementation, and with this change, adjusts handling of
`i128`s on *both* Fastcall/x64 *and* SysV/x64 platforms. This was done
to align with actual behavior by the "rustc ABI" on both platforms, as
mapped out experimentally (Compiler Explorer link in comments). This
behavior is gated under the `enable_llvm_abi_extensions` flag.
Note also that this does *not* add x64 unwind info on Windows. That will
come in a future PR (but is planned!).
This instruction has a single instruction lowering in AVX512F/VL and a three instruction lowering in AVX but neither is currently supported in the x64 backend. To implement this, we instead subtract the vector from 0 and use a blending instruction to pick the lanes containing the absolute value.
* Update wasm-tools crates
* Update Wasm SIMD spec tests
* Invert 'experimental_x64_should_panic' logic
By doing this, it is easier to see which spec tests currently panic. The new tests correspond to recently-added instructions.
* Fix: ignore new spec tests for all backends
Add a bunch of test vectors that actually expose this (previously the
shift-by-zero test had equal lower and upper halves and hid the bug),
including the most basic of all, 1 << 0 == 1 (thanks @bjorn3 for finding
this).
If an instruction has more than one trap record associated with it (for
example: a divide instruction that has participated in load-op fusion,
so we have both a heap-out-of-bounds trap record due to its load and a
divide-by-zero trap record due to its divide op), the current MachBuffer
code would emit only one of the trap records to the sink.
Separately, divide instructions probably shouldn't merge loads, because
the two separate possible traps at one location might be confusing for
some embedders (certainly in Lucet). Divide seems to be the only case in
our current codegen where such merging might occur. This PR changes the
lowering to always force the divisor into a register.
Finally, while working out why trap records were not appearing, I had
noticed that `isa::x64::emit_std_enc_mem()` was only emitting heap-OOB
trap metadata for loads/stores when it had a srcloc. This PR ensures
that the metadata is emitted even when the srcloc is empty.
Note that none of the above presents a security or correctness problem;
trap metadata only affects the status that we return to the embedder
when a Wasm program terminates with a trap.
When a block is unreachable, the `unreachable_code` pass will remove it,
which is perfectly sensible. Jump tables factor into unreachability in
an expected way: even if a block is listed in a jump table, the block
might be unreachable if the jump table itself is unused (or used in an
unreachable block). Unfortunately, the verifier still expects all
block refs in all jump tables to be valid, even after DCE, which will
not always be the case.
This makes a simple change to the pass: after removing blocks, it scans
jump tables. Any jump table that refers to an unreachable block must
itself be unused, and so we just clear its entries. We do not bother
removing it (and renumbering all later jumptables), and we do not bother
computing full unused-ness of all jumptables, as that would be more
expensive; it's sufficient to clear out the ones that refer to
unreachable blocks, which are a subset of all unused jumptables.
Fixes#2670.
This fixes#2672 and #2679, and also fixes an incorrect instruction
emission (`test` with small immediate) that we had missed earlier.
The shift-related fixes have to do with (i) shifts by 0 bits, as a
special case that must be handled; and (ii) shifts by a 128-bit amount,
which we can handle by just dropping the upper half (we only use 3--7
bits of shift amount).
This adjusts the lowerings appropriately, and also adds run-tests to
ensure that the lowerings actually execute correctly (previously we only
had compile-tests with golden lowerings; I'd like to correct this for
more ops eventually, adding run-tests beyond what the Wasm spec and
frontend covers).
This unifies the logic around Rex prefix emission and hopefully makes REX prefix errors less likely.
There are still several instructions that use other sources to determine the flags, so set_w and clear_w are left as is.
Additional cleanups:
* Change always_emit_if_8bit_needed to take a Reg instead of a u8 for type safety.
* Deduplicated emission code in MovRM.
- Panic messages must now be string literals (we used `format!()` in
many places; `panic!()` can take format strings directly).
- Some dead enum options with EVEX encoding stuff in old x86 backend.
This will go away soon and/or be moved to the new backend anyway, so
let's silence the warning for now.
- A few other misc warnings.
