The `libfuzzer-sys` update in #5068 included some changes to the
`fuzz_target!` macro which caused a bare `run` function to be shadowed
by the macro-defined `run` function (changed in
rust-fuzz/libfuzzer#95) which meant that some of our fuzz targets were
infinite looping or stack overflowing as the same function was called
indefinitely. This renames the top-level `run` function to something
else in the meantime.
Using rayon adds a lot of dependencies to Cranelift. The total
unparallelized time the code that uses rayon takes is less than half a
second and it runs at compile time, so there is pretty much no benefit
to parallelizing it.
This can help rustc/llvm avoid bounds checks, but more importantly I will have
future changes here that remove indexing of params, and instead hand them out as
an iterator.
The `SigData::from_func_sig` constructor will already ensure that the struct
return pointer is returned, so this is a purely unnecessary call.
Note that this is not a performance speed up, since
`ensure_struct_return_ptr_is_returned` doesn't do any significant work if the
signature is already legalized.
This fixes#5086 by addressing two separate issues:
- The `ValueDataPacked::set_type()` helper had an embarrassing bitfield-manipulation bug that would mangle the rest of a `ValueDef` when setting its type. This is not normally used, only when the egraph elaboration fills in types after-the-fact on a multi-value node.
- The lowering rules for `isplit` on aarch64 and s390x were dispatching on the first output type, rather than the input type. When only the second output is used (as in the example in #5086), the first output type actually remains `INVALID` (and this is fine because it's never used).
Remove uses of reg_mod from the s390x backend. This required moving away from using r0/r1 as the result registers from a few different pseudo instructions, standardizing instead on r2/r3. That change was necessary as regalloc2 will not correctly allocate registers that aren't listed in the allocatable set, which r0/r1 are not.
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Upgrade our github actions to "node16"
Each github actions run has a lot of warnings about using node12 so this
upgrades our repository to using node16. I'm hoping no other changes are
needed and I suspect other actions we're using are on node12 and will
need further updates, but this should help pin down what's remaining.
* Update `actions/checkout` workflow to `v3`
* Update to `actions/cache@v3`
* Update to `actions/upload-artifact@v3`
* Drop usage of `actions-rs/toolchain`
* Update to `actions/setup-python@v4`
* Update mdbook version
* fuzzgen: Test compiler flags
* cranelift: Generate `all()` function for all enum flags
This allows a user to iterate all flags that exist.
* fuzzgen: Minimize regalloc_checker compiles
* fuzzgen: Limit the amount of test case inputs
* fuzzgen: Add egraphs flag
It's finally here! 🥳
* cranelift: Add fuzzing comment to settings
* fuzzgen: Add riscv64
* fuzzgen: Unconditionally enable some flags
This commit fixes the `push-tag.yml` workflow to work with the new
`Cargo.toml` manifest since workspace inheritance was added. This
additionally fixes some warnings coming up on CI about our usage of
deprecated features on github actions.
* egraphs: a few miscellaneous compile-time optimizations.
These optimizations together are worth about a 2% compile-time
reduction, as measured on one core with spidermonkey.wasm as an input,
using `hyperfine` on `wasmtime compile`.
The changes included are:
- Some better pre-allocation (blockparams and side-effects concatenated
list vecs);
- Avoiding the indirection of storing list-of-types for every Pure and
Inst node, when almost all nodes produce only a single result;
instead, store arity and single type if it exists, and allow result
projection nodes to fill in types otherwise;
- Pack the `MemoryState` enum into one `u32` (this together with the
above removal of the type slice allows `Node` to
shrink from 48 bytes to 32 bytes);
- always-inline an accessor (`entry` on `CtxHash`) that wasn't
(`always(inline)` appears to be load-bearing, rather than just
`inline`);
- Split the update-analysis path into two hotpaths, one for the union
case and one for the new-node case (and the former can avoid
recomputing for the contained node when replacing a node with
node-and-child eclass entry).
* Review feedback.
* Fix test build.
* Fix to lowering when unused output with invalid type is present.
* func_wrap_async typechecks
* func call async
* instantiate_async
* fixes
* async engine creation for tests
* start adding a component model test for async
* fix wrong check for async support, factor out Instance::new_started to an unchecked impl
* tests: wibbles
* component::Linker::func_wrap: replace IntoComponentFunc with directly accepting a closure
We find that this makes the Linker::func_wrap type signature much easier
to read. The IntoComponentFunc abstraction was adding a lot of weight to
"splat" a set of arguments from a tuple of types into individual
arguments to the closure. Additionally, making the StoreContextMut
argument optional, or the Result<return> optional, wasn't very
worthwhile.
* Fixes for the new style of closure required by component::Linker::func_wrap
* future of result of return
* add Linker::instantiate_async and {Typed}Func::post_return_async
* fix fuzzing generator
* note optimisation opportunity
* simplify test
* Add egraphs option to Wasmtime config, and add it to fuzzing config generation.
This PR adds a wrapper method for Cranelift's `use_egraphs` setting to
Wasmtime's `Config`, named `cranelift_use_egraphs` analogously to its
existing `cranelift_opt_level`.
Eventually this should become a no-op as egraph-based optimization
becomes the default, but until then it makes sense to expose this as
another kind of optimization option.
This PR then adds the option to the `Arbitrary`-based config generation
for fuzzing, so compilation with egraphs will be fuzzed (on its own and
against other configurations and oracles).
* Don't use `NamedTempFile` on Windows
It looks like this prevents mmap-ing since the named temporary file
holds a `File` open which conflicts with the rights we're trying to open
the file for mmap-ing. Instead use a temporary directory to try to fix
this issue.
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
* component::Linker::func_wrap: replace IntoComponentFunc with directly accepting a closure
We find that this makes the Linker::func_wrap type signature much easier
to read. The IntoComponentFunc abstraction was adding a lot of weight to
"splat" a set of arguments from a tuple of types into individual
arguments to the closure. Additionally, making the StoreContextMut
argument optional, or the Result<return> optional, wasn't very
worthwhile.
* Fixes for the new style of closure required by component::Linker::func_wrap
* fix fuzzing generator
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
This is a simple error in the const-prop rules: uextend was not
masking iconst's u64 immediate when extending from i32 to
i64. Arguably an iconst.i32 should not have nonzero bits in the upper
32 of its immediate, but that's a separate design question. For now,
if our invariant is that the upper bits are ignored, then it is
required to mask the bits when const-evaling a `uextend`.
Fixes#5047.
* Plumb type exports in components around more
This commit adds some more plumbing for type exports to ensure that they
show up in the final compiled representation of a component. For now
they continued to be ignored for all purposes in the embedding API
itself but I found this useful to explore in `wit-bindgen` based tooling
which is leveraging the component parsing in Wasmtime.
* Add a field to `ModuleTranslation` to store the original wasm
This commit adds a field to be able to refer back to the original wasm
binary for a `ModuleTranslation`. This field is used in the upcoming
support for host generation in `wit-component` to "decompile" a
component into core wasm modules to get instantiated. This is used to
extract a core wasm module from the original component.
* FIx a build warning
* Add a benchmark for traps with many Wasm<-->host calls on the stack
* Add a test for expected Wasm stack traces with Wasm<--host calls on the stack when we trap
* Don't re-capture backtraces when propagating traps through host frames
This fixes some accidentally quadratic code where we would re-capture a Wasm
stack trace (takes `O(n)` time) every time we propagated a trap through a host
frame back to Wasm (can happen `O(n)` times). And `O(n) * O(n) = O(n^2)`, of
course. Whoops. After this commit, it trapping with a call stack that is `n`
frames deep of Wasm-to-host-to-Wasm calls just captures a single backtrace and
is therefore just a proper `O(n)` time operation, as it is intended to be.
Now we explicitly track whether we need to capture a Wasm backtrace or not when
raising a trap. This unfortunately isn't as straightforward as one might hope,
however, because of the split between `wasmtime::Trap` and
`wasmtime_runtime::Trap`. We need to decide whether or not to capture a Wasm
backtrace inside `wasmtime_runtime` but in order to determine whether to do that
or not we need to reflect on the `anyhow::Error` and see if it is a
`wasmtime::Trap` that already has a backtrace or not. This can't be done the
straightforward way because it would introduce a cyclic dependency between the
`wasmtime` and `wasmtime-runtime` crates. We can't merge those two `Trap`
types-- at least not without effectively merging the whole `wasmtime` and
`wasmtime-runtime` crates together, which would be a good idea in a perfect
world but would be a *ton* of ocean boiling from where we currently are --
because `wasmtime::Trap` does symbolication of stack traces which relies on
module registration information data that resides inside the `wasmtime` crate
and therefore can't be moved into `wasmtime-runtime`. We resolve this problem by
adding a boolean to `wasmtime_runtime::raise_user_trap` that controls whether we
should capture a Wasm backtrace or not, and then determine whether we need a
backtrace or not at each of that function's call sites, which are in `wasmtime`
and therefore can do the reflection to determine whether the user trap already
has a backtrace or not. Phew!
Fixes#5037
* debug assert that we don't record unnecessary backtraces for traps
* Add assertions around `needs_backtrace`
Unfortunately we can't do
debug_assert_eq!(needs_backtrace, trap.inner.backtrace.get().is_some());
because `needs_backtrace` doesn't consider whether Wasm backtraces have been
disabled via config.
* Consolidate `needs_backtrace` calculation followed by calling `raise_user_trap` into one place
* allow a ComponentTypeRef::Type to point to a component TypeDef
* component matching: don't assert exported Interface type definitions are "defined"
types may be exported by their name for consumption by some component
runtimes, but in wasmtime this doesn't matter (we lift and lower to
types, not define them) so we should ignore these.
* component-model instance tests: show that an import can export a type definition
this is meaningless, but it should be accepted. (previously rejected)
* cranelift: Add FlushInstructionCache for AArch64 on Windows
This was previously done on #3426 for linux.
* wasmtime: Add FlushInstructionCache for AArch64 on Windows
This was previously done on #3426 for linux.
* cranelift: Add MemoryUse flag to JIT Memory Manager
This allows us to keep the icache flushing code self-contained and not leak implementation details.
This also changes the windows icache flushing code to only flush pages that were previously unflushed.
* Add jit-icache-coherence crate
* cranelift: Use `jit-icache-coherence`
* wasmtime: Use `jit-icache-coherence`
* jit-icache-coherence: Make rustix feature additive
Mutually exclusive features cause issues.
* wasmtime: Remove rustix from wasmtime-jit
We now use it via jit-icache-coherence
* Rename wasmtime-jit-icache-coherency crate
* Use cfg-if in wasmtime-jit-icache-coherency crate
* Use inline instead of inline(always)
* Add unsafe marker to clear_cache
* Conditionally compile all rustix operations
membarrier does not exist on MacOS
* Publish `wasmtime-jit-icache-coherence`
* Remove explicit windows check
This is implied by the target_os = "windows" above
* cranelift: Remove len != 0 check
This is redundant as it is done in non_protected_allocations_iter
* Comment cleanups
Thanks @akirilov-arm!
* Make clear_cache safe
* Rename pipeline_flush to pipeline_flush_mt
* Revert "Make clear_cache safe"
This reverts commit 21165d81c9030ed9b291a1021a367214d2942c90.
* More docs!
* Fix pipeline_flush reference on clear_cache
* Update more docs!
* Move pipeline flush after `mprotect` calls
Technically the `clear_cache` operation is a lie in AArch64, so move the pipeline flush after the `mprotect` calls so that it benefits from the implicit cache cleaning done by it.
* wasmtime: Remove rustix backend from icache crate
* wasmtime: Use libc for macos
* wasmtime: Flush icache on all arch's for windows
* wasmtime: Add flags to membarrier call
* egraph-based midend: draw the rest of the owl.
* Rename `egg` submodule of cranelift-codegen to `egraph`.
* Apply some feedback from @jsharp during code walkthrough.
* Remove recursion from find_best_node by doing a single pass.
Rather than recursively computing the lowest-cost node for a given
eclass and memoizing the answer at each eclass node, we can do a single
forward pass; because every eclass node refers only to earlier nodes,
this is sufficient. The behavior may slightly differ from the earlier
behavior because we cannot short-circuit costs to zero once a node is
elaborated; but in practice this should not matter.
* Make elaboration non-recursive.
Use an explicit stack instead (with `ElabStackEntry` entries,
alongside a result stack).
* Make elaboration traversal of the domtree non-recursive/stack-safe.
* Work analysis logic in Cranelift-side egraph glue into a general analysis framework in cranelift-egraph.
* Apply static recursion limit to rule application.
* Fix aarch64 wrt dynamic-vector support -- broken rebase.
* Topo-sort cranelift-egraph before cranelift-codegen in publish script, like the comment instructs me to!
* Fix multi-result call testcase.
* Include `cranelift-egraph` in `PUBLISHED_CRATES`.
* Fix atomic_rmw: not really a load.
* Remove now-unnecessary PartialOrd/Ord derivations.
* Address some code-review comments.
* Review feedback.
* Review feedback.
* No overlap in mid-end rules, because we are defining a multi-constructor.
* rustfmt
* Review feedback.
* Review feedback.
* Review feedback.
* Review feedback.
* Remove redundant `mut`.
* Add comment noting what rules can do.
* Review feedback.
* Clarify comment wording.
* Update `has_memory_fence_semantics`.
* Apply @jameysharp's improved loop-level computation.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion commit.
* Fix off-by-one in new loop-nest analysis.
* Review feedback.
* Review feedback.
* Review feedback.
* Use `Default`, not `std::default::Default`, as per @fitzgen
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Apply @fitzgen's comment elaboration to a doc-comment.
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add stat for hitting the rewrite-depth limit.
* Some code motion in split prelude to make the diff a little clearer wrt `main`.
* Take @jameysharp's suggested `try_into()` usage for blockparam indices.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Take @jameysharp's suggestion to avoid double-match on load op.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion (add import).
* Review feedback.
* Fix stack_load handling.
* Remove redundant can_store case.
* Take @jameysharp's suggested improvement to FuncEGraph::build() logic
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Tweaks to FuncEGraph::build() on top of suggestion.
* Take @jameysharp's suggested clarified condition
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Clean up after suggestion (unused variable).
* Fix loop analysis.
* loop level asserts
* Revert constant-space loop analysis -- edge cases were incorrect, so let's go with the simple thing for now.
* Take @jameysharp's suggestion re: result_tys
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix up after suggestion
* Take @jameysharp's suggestion to use fold rather than reduce
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fixup after suggestion
* Take @jameysharp's suggestion to remove elaborate_eclass_use's return value.
* Clarifying comment in terminator insts.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Cranelift: Make `Opcode` represented as a `u8` instead of `u16`
* Cranelift: Remove unused conversion impls for `Opcode`
These are vestigial, left over from Peepmatic.
In #5023 we are seeing a failing CI job (see [1]); after four attempted
restarts, it 404's each time when trying to download OpenVino from the
Intel apt mirrors.
This PR temporarily removes the wasi-nn CI job from our CI configuration
so that we have green CI and can merge other work.
[1] https://github.com/bytecodealliance/wasmtime/actions/runs/3200861896/jobs/5228903240
* Fix StructReturn handling: properly mark the clobber, and offset actual rets.
The legalization of `StructReturn` was causing issues in the new
call-handling code: the `StructReturn` ret was included in the `SigData` as
if it were an actual CLIF-level return value, but it is not.
Prior to using regalloc constraints for return values, we
unconditionally included rax (or the architecture's usual return
register) as a def, so it would be properly handled as "clobbered" by
the regalloc. With the new scheme, we include defs on the call only for
CLIF-level outputs. Callees with `StructReturn` args were thus not known
to clobber the return-value register, and values might be corrupted.
This PR updates the code to include a `StructReturn` ret as a clobber
rather than a returned value in the relevant spots. I observed it
causing saves/restores of rax in some CLIF that @bjorn3 provided me, but
I was having difficulty minimizing this into a test-case that I would be
comfortable including as a precise-output case (including the whole
thing verbatim would lock down a bunch of other irrelevant details and
cause test-update noise later). If we can find a more minimized example
I'm happy to include it as a filetest.
Fixes#5018.
* Replace resize+copy_from_slice with extend_from_slice
Vec::resize initializes the new space, which is wasted effort if we're
just going to call `copy_from_slice` on it immediately afterward. Using
`extend_from_slice` is simpler, and very slightly faster.
If the new size were bigger than the buffer we're copying from, then it
would make sense to initialize the excess. But it isn't: it's always
exactly the same size.
* Move helpers from Context to CompiledCode
These methods only use information from Context::compiled_code, so they
should live on CompiledCode instead.
* Remove an unnecessary #[cfg_attr]
There are other uses of `#[allow(clippy::too_many_arguments)]` in this
file, so apparently it doesn't need to be guarded by the "cargo-clippy"
feature.
* Fix a few comments
Two of these were wrong/misleading:
- `FunctionBuilder::new` does not clear the provided func_ctx. It does
debug-assert that the context is already clear, but I don't think
that's worth a comment.
- `switch_to_block` does not "create values for the arguments." That's
done by the combination of `append_block_params_for_function_params`
and `declare_wasm_parameters`.
* wasmtime-cranelift: Misc cleanups
The main change is to use the `CompiledCode` reference we already had
instead of getting it out of `Context` repeatedly. This removes a bunch
of `unwrap()` calls.
* wasmtime-cranelift: Factor out uncached compile
When implementing custom WasiDir instances, there is a lot of
boilerplate. These default methods should reduce code for implementors
who want to provide only a subset of functionality.
Signed-off-by: Nathaniel McCallum <nathaniel@profian.com>
Signed-off-by: Nathaniel McCallum <nathaniel@profian.com>
* Tidy up the WASI `ErrorKind` enum.
`ErrorKind` is an internal enum used in wasi-libc to represent WASI
errors that aren't precisely represened by `std::io::ErrorKind` errors.
Add a descriptive comment, and remove some codes that are no longer
needed:
- Remove `NotCapable`, which is no longer used.
- Remove `WouldBlk`, `Exist`, `Noent`, and `Inval`, which have
one-to-one correspondences with codes in `std::io::ErrorKind`.
This will simplify the error handling in #4947 and #4967, as it means
the code will no longer have to check for two different forms of these
errors.
* Map `std::io::ErrorKind::InvalidInput` to `Ok(types::Errno::Inval)`.
