* Add initial support for fused adapter trampolines
This commit lands a significant new piece of functionality to Wasmtime's
implementation of the component model in the form of the implementation
of fused adapter trampolines. Internally within a component core wasm
modules can communicate with each other by having their exports
`canon lift`'d to get `canon lower`'d into a different component. This
signifies that two components are communicating through a statically
known interface via the canonical ABI at this time. Previously Wasmtime
was able to identify that this communication was happening but it simply
panicked with `unimplemented!` upon seeing it. This commit is the
beginning of filling out this panic location with an actual
implementation.
The implementation route chosen here for fused adapters is to use a
WebAssembly module itself for the implementation. This means that, at
compile time of a component, Wasmtime is generating core WebAssembly
modules which then get recursively compiled within Wasmtime as well. The
choice to use WebAssembly itself as the implementation of fused adapters
stems from a few motivations:
* This does not represent a significant increase in the "trusted
compiler base" of Wasmtime. Getting the Wasm -> CLIF translation
correct once is hard enough much less for an entirely different IR to
CLIF. By generating WebAssembly no new interactions with Cranelift are
added which drastically reduces the possibilities for mistakes.
* Using WebAssembly means that component adapters are insulated from
miscompilations and mistakes. If something goes wrong it's defined
well within the WebAssembly specification how it goes wrong and what
happens as a result. This means that the "blast zone" for a wrong
adapter is the component instance but not the entire host itself.
Accesses to linear memory are guaranteed to be in-bounds and otherwise
handled via well-defined traps.
* A fully-finished fused adapter compiler is expected to be a
significant and quite complex component of Wasmtime. Functionality
along these lines is expected to be needed for Web-based polyfills of
the component model and by using core WebAssembly it provides the
opportunity to share code between Wasmtime and these polyfills for the
component model.
* Finally the runtime implementation of managing WebAssembly modules is
already implemented and quite easy to integrate with, so representing
fused adapters with WebAssembly results in very little extra support
necessary for the runtime implementation of instantiating and managing
a component.
The compiler added in this commit is dubbed Wasmtime's Fused Adapter
Compiler of Trampolines (FACT) because who doesn't like deriving a name
from an acronym. Currently the trampoline compiler is limited in its
support for interface types and only supports a few primitives. I plan
on filing future PRs to flesh out the support here for all the variants
of `InterfaceType`. For now this PR is primarily focused on all of the
other infrastructure for the addition of a trampoline compiler.
With the choice to use core WebAssembly to implement fused adapters it
means that adapters need to be inserted into a module. Unfortunately
adapters cannot all go into a single WebAssembly module because adapters
themselves have dependencies which may be provided transitively through
instances that were instantiated with other adapters. This means that a
significant chunk of this PR (`adapt.rs`) is dedicated to determining
precisely which adapters go into precisely which adapter modules. This
partitioning process attempts to make large modules wherever it can to
cut down on core wasm instantiations but is likely not optimal as
it's just a simple heuristic today.
With all of this added together it's now possible to start writing
`*.wast` tests that internally have adapted modules communicating with
one another. A `fused.wast` test suite was added as part of this PR
which is the beginning of tests for the support of the fused adapter
compiler added in this PR. Currently this is primarily testing some
various topologies of adapters along with direct/indirect modes. This
will grow many more tests over time as more types are supported.
Overall I'm not 100% satisfied with the testing story of this PR. When a
test fails it's very difficult to debug since everything is written in
the text format of WebAssembly meaning there's no "conveniences" to
print out the state of the world when things go wrong and easily debug.
I think this will become even more apparent as more tests are written
for more types in subsequent PRs. At this time though I know of no
better alternative other than leaning pretty heavily on fuzz-testing to
ensure this is all exercised.
* Fix an unused field warning
* Fix tests in `wasmtime-runtime`
* Add some more tests for compiled trampolines
* Remap exports when injecting adapters
The exports of a component were accidentally left unmapped which meant
that they indexed the instance indexes pre-adapter module insertion.
* Fix typo
* Rebase conflicts
* x64: Add VEX Instruction Encoder
This uses a similar builder pattern to the EVEX Encoder.
Does not yet support memory accesses.
* x64: Add FMA Flag
* x64: Implement SIMD `fma`
* x64: Use 4 register Vex Inst
* x64: Reorder VEX pretty print args
* support dynamic function calls in component model
This addresses #4310, introducing a new `component::values::Val` type for
representing component values dynamically, as well as `component::types::Type`
for representing the corresponding interface types. It also adds a `call` method
to `component::func::Func`, which takes a slice of `Val`s as parameters and
returns a `Result<Val>` representing the result.
Note that I've moved `post_return` and `call_raw` from `TypedFunc` to `Func`
since there was nothing specific to `TypedFunc` about them, and I wanted to
reuse them. The code in both is unchanged beyond the trivial tweaks to make
them fit in their new home.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* order variants and match cases more consistently
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* implement lift for String, Box<str>, etc.
This also removes the redundant `store` parameter from `Type::load`.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* implement code review feedback
This fixes a few issues:
- Bad offset calculation when lowering
- Missing variant padding
- Style issues regarding `types::Handle`
- Missed opportunities to reuse `Lift` and `Lower` impls
It also adds forwarding `Lift` impls for `Box<[T]>`, `Vec<T>`, etc.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* move `new_*` methods to specific `types` structs
Per review feedback, I've moved `Type::new_record` to `Record::new_val` and
added a `Type::unwrap_record` method; likewise for the other kinds of types.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* make tuple, option, and expected type comparisons recursive
These types should compare as equal across component boundaries as long as their
type parameters are equal.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* improve error diagnostic in `Type::check`
We now distinguish between more failure cases to provide an informative error
message.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* address review feedback
- Remove `WasmStr::to_str_from_memory` and `WasmList::get_from_memory`
- add `try_new` methods to various `values` types
- avoid using `ExactSizeIterator::len` where we can't trust it
- fix over-constrained bounds on forwarded `ComponentType` impls
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* rearrange code per review feedback
- Move functions from `types` to `values` module so we can make certain struct fields private
- Rename `try_new` to just `new`
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* remove special-case equality test for tuples, options, and expecteds
Instead, I've added a FIXME comment and will open an issue to do recursive
structural equality testing.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* Add cmake compatibility to c-api
* Add CMake documentation to wasmtime.h
* Add CMake instructions in examples
* Modify CI for CMake support
* Use correct rust in CI
* Trigger build
* Refactor run-examples
* Reintroduce example_to_run in run-examples
* Replace run-examples crate with cmake
* Fix markdown formatting in examples readme
* Fix cmake test quotes
* Build rust wasm before cmake tests
* Pass CTEST_OUTPUT_ON_FAILURE
* Another cmake test
* Handle os differences in cmake test
* Fix bugs in memory and multimemory examples
I noticed that `TableOp::insert` had assertions that `num_params` and
`table_size` were greater than 0, but no assert for `num_globals`. These
asserts couldn't be hit because the `*_RANGE` constants were all set to
a minimum of 1.
But the only reason I can see to prohibit 0-sized tables, locals, or
globals, was because indexes into those spaces were generated with the
`%` operator. Allowing 0-sized spaces requires not generating the
corresponding instructions at all when there are no valid indexes.
So I pushed the final selection of which table/local/global to access
earlier, to the moment when we're picking which TableOps to run. Then,
instead of generating a random u8 or u32 and taking the remainder to get
it into the right range, I can just ask `arbitrary` to generate a number
in the right range to begin with.
So this now explores some size-0 corners that it didn't before, and it
doesn't require reasoning about whether remainder can divide by zero.
Also I think it uses fewer bits of the `Unstructured` input to produce
the same cases, and I hope that lets libFuzzer more quickly find bits it
can mutate to get to novel coverage paths.
* Components: ignore type exports (for now).
This commit updates component translation to ignore type exports for now.
Components generated with `wit-component` contain type exports to give names to
types used within the component's functions based on the component's wit
definition.
The intention is to allow bindings to be generated with meaningful names
directly from a component. In the future, type exports (and imports) may be
used for more than this purpose to support things like resource types.
This commit effectively ignores type exports when translating the component as
they are not useful to executing a component at this time.
Closes#4415.
* Code review feedback.
* Skip new `table_ops` test under emulation
When emulating we already have to disable most pooling-allocator related
tests so this commit carries over that logic to the new fuzz test which
may run some configurations with the pooling allocator depending on the
random input.
* Fix panics in s390x codegen related to aliases
This commit fixes an issue introduced as part of the fix for
GHSA-5fhj-g3p3-pq9g. The `reftyped_vregs` list given to `regalloc2` is
not allowed to have duplicates in it and while the list originally
doesn't have duplicates once aliases are applied the list may have
duplicates. The fix here is to perform another pass to remove duplicates
after the aliases have been processed.
* Improve cranelift disassembly of stack maps
Print out extra information about stack maps such as their contents and
other related metadata available. Additionally also print out addresses
in hex to line up with the disassembly otherwise printed as well.
* Improve the `table_ops` fuzzer
* Generate more instructions by default
* Fix negative indices appearing in `table.{get,set}`
* Assert that the traps generated are expected to prevent accidental
other errors reporting a fuzzing success.
* Fix `reftype_vregs` reported to `regalloc2`
This fixes a mistake in the register allocation of Cranelift functions
where functions using reference-typed arguments incorrectly report which
virtual registers are reference-typed values if there are vreg aliases
in play. The fix here is to apply the vreg aliases to the final list of
reftyped regs which is eventually passed to `regalloc2`.
The main consequence of this fix is that functions which previously
accidentally didn't have correct stack maps should now have the missing
stack maps.
* Add a test that `table_ops` gc's eventually
* Add a comment about new alias resolution
* Update crates/fuzzing/src/oracles.rs
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add some comments
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
Preserving frame pointers -- even inside leaf functions -- makes it easy to
capture the stack of a running program, without requiring any side tables or
metadata (like `.eh_frame` sections). Many sampling profilers and similar tools
walk frame pointers to capture stacks. Enabling this option will play nice with
those tools.
These were for x86 (32-bit) where the ISA didn't have instructions for these
things, but now that we don't support that, and always have SSE2 for x86_64, we
never need or use these libcalls anymore.
This commit augments the current translation phase of components with
extra machinery to track the type information of component items such as
instances, components, and functions. The end goal of this commit is to
enable the `Lower` instruction to know the type of the component
function being lowered. Currently during the inlining pass where
component fusion is detected the type of the lifted function is known,
but to implement fusion entirely the type of the lowered function must
be known. Note that these two types are expected to be different to
allow for the subtyping rules specified by the component model.
For now nothing is actually done with this information other than noting
its presence in the face of a lifted-then-lowered function. My hope
though was to split this out for a separate review to avoid making a
future component-adapter-compiler-containing-PR too large.
This moves them into a new `wasmtime-asm-macros` crate that can be used not just
from the `wasmtime-fibers` crate but also from other crates (e.g. we will need
them in https://github.com/bytecodealliance/wasmtime/pull/4431).
This commit fixes an issue with the initialization of element segments
when one of the elements in the element segment is `ref.func null`.
Previously the contents of a table were accidentally initialized with
the raw value of the `*mut VMCallerCheckedAnyfunc` which bypassed the
"this is initialized" encoding of function table entries that Wasmtime
uses for lazy table initialization. The fix here was to ensure that the
encoded form is used.
The impact of this issue is that a module could panic at runtime when
accessing a table element that was initialized with an element segment
containing a `ref.null func` entry. This only happens with imported
tables in a WebAssembly module where the table itself was defined on the
host. If the table was defined in another wasm module or in the local
wasm module this bug would not occur. Additionally this bug requires
enabling the reference types proposal for WebAssembly (which is enabled
by default) due to the usage of encodings for null funcrefs in element
segments.
* implement wasmtime::component::flags! per #4308
This is the last macro needed to complete #4308. It supports generating a Rust
type that represents a `flags` component type, analogous to how the [bitflags
crate](https://crates.io/crates/bitflags) operates.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* wrap `format_flags` output in parens
This ensures we generate non-empty output even when no flags are set. Empty
output for a `Debug` implementation would be confusing.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* unconditionally derive `Lift` and `Lower` in wasmtime::component::flags!
Per feedback on #4414, we now derive impls for those traits unconditionally,
which simplifies the syntax of the macro.
Also, I happened to notice an alignment bug in `LowerExpander::expand_variant`,
so I fixed that and cleaned up some related code.
Finally, I used @jameysharp's trick to calculate bit masks without looping.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* fix shift overflow regression in previous commit
Jamey pointed out my mistake: I didn't consider the case when the flag count was
evenly divisible by the representation size. This fixes the problem and adds
test cases to cover it.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* fuzz: add a single instruction module generator
As proposed by @cfallin in #3251, this change adds a way to generate a
Wasm module for a single instruction. It captures the necessary
parameter and result types so that fuzzing can not only choose which
instruction to check but also generate values to pass to the
instruction. Not all instructions are available yet, but a significant
portion of scalar instructions are implemented in this change.
This does not wire the generator up to any fuzz targets.
* review: use raw string in test
* review: remove once_cell, use slices
* review: refactor macros to use valtype!
* review: avoid cloning when choosing a SingleInstModule
This commit removes Wasmtime's dependency on the `region` crate. The
motivation for this came about when I was updating dependencies and saw
that `region` had a new major version at 3.0.0 as opposed to our
currently used 2.3 track. In reviewing the use cases of `region` within
Wasmtime I found two trends in particular which motivated this commit:
* Some unix-specific areas of `wasmtime_runtime` use
`rustix::mm::mprotect` instead of `region::protect` already. This
means that the usage of `region::protect` for changing virtual memory
protections was already inconsistent.
* Many uses of `region::protect` were already in unix-specific regions
which could make use of `rustix`.
Overall I opted to remove the dependency on the `region` crate to avoid
chasing its versions over time. Unix-specific changes of protections
were easily changed to `rustix::mm::mprotect`. There were two locations
where a windows/unix split is now required and I subjectively ruled
"that seems ok". Finally removing `region` also meant that the "what is
the current page size" query needed to be inlined into
`wasmtime_runtime`, which I have also subjectively ruled "that seems
fine".
Finally one final refactoring here was that the `unix.rs` and `linux.rs`
split for the pooling allocator was merged. These two files already only
differed in one function so I slapped a `cfg_if!` in there to help
reduce the duplication.
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
Previously, much of the logic for generating the various objects needed
for fuzzing was concentrated primarily in `generators.rs`. In trying to
piece together what code does what, the size of the file and the light
documentation make it hard to discern what each part does. Since several
generator structures had been split out as separate modules in the
`generators/` directory, this change takes that refactoring further by
moving the structures in `generators.rs` to their own modules. No logic
changes were made, only the addition of documentation in a few places.
* wasmtime: Rename host->wasm trampolines
As we introduce new types of trampolines, having clear names for our existing
trampolines will be helpful.
* Fix typo in docs for `VMCOMPONENT_MAGIC`
* wasmtime: Add criterion micro benchmarks for traps
Additionally remove the `rlib` crate type so it's possible to build the
API with LTO options if configured (otherwise Cargo ignores LTO
configuration with an `rlib` output since it would hit an error in
rustc)
* Update differential fuzzing configuration
This uses some new features of `wasm-smith` and additionally tweaks the
existing fuzz configuration:
* More than one function is now allowed to be generated. There's no
particular reason to limit differential execution to just one and we
may want to explore other interesting module shapes.
* More than one function type is now allowed to possibly allow more
interesting `block` types.
* Memories are now allowed to grow beyond one page, but still say small
by staying underneath 10 pages.
* Tables are now always limited in their growth to ensure consistent
behavior across engines (e.g. with the pooling allocator vs v8).
* The `export_everything` feature is used instead of specifying a
min/max number of exports.
The `wasmi` differential fuzzer was updated to still work if memory is
exported, but otherwise the v8 differential fuzzer already worked if a
function was exported but a memory wasn't. Both fuzzers continue to
execute only the first exported function.
Also notable from this update is that the `SwarmConfig` from
`wasm-smith` will now include an arbitrary `allowed_instructions`
configuration which may help explore the space of interesting modules
more effectively.
* Fix typos
* Bump versions of wasm-tools crates
Note that this leaves new features in the component model, outer type
aliases for core wasm types, unimplemented for now.
* Move to crates.io-based versions of tools
* ci: replace OpenVINO installer action
To test wasi-nn, we currently use an OpenVINO backend. The Wasmtime CI
must install OpenVINO using a custom GitHub action. This CI action has
not been updated in some time and in the meantime OpenVINO (and the
OpenVINO crates) have released several new versions.
https://github.com/abrown/install-openvino-action is an external action
that we plan to keep up to date with the latest releases. This change
replaces the current CI action with that one.
* wasi-nn: upgrade openvino dependency to v0.4.1
This eliminates a `lazy_static` dependency and changes a few parameters
to pass by reference. Importantly, it enables support for the latest
versions of OpenVINO (v2022.*) in wasi-nn.
* ci: update wasi-nn script to source correct env script
* ci: really use the correct path for the env script
Also, clarify which directory OpenVINO is installed in (the symlink may
not be present).
* Update tracing-core to a version which doesn't depend on lazy-static.
* Update crossbeam-utils to a version that doesn't depend on lazy-static.
* Update crossbeam-epoch to a version that doesn't depend on lazy-static.
* Update clap to a version that doesn't depend on lazy-static.
* Convert Wasmtime's own use of lazy_static to once_cell.
* Make `GDB_REGISTRATION`'s comment a doc comment.
* Fix compilation on Windows.
This commit adds support to Wasmtime for components which themselves
export instances. The support here adds new APIs for how instance
exports are accessed in the embedding API. For now this is mostly just a
first-pass where the API is somewhat confusing and has a lot of
lifetimes. I'm hoping that over time we can figure out how to simplify
this but for now it should at least be expressive enough for exploring
the exports of an instance.
* support enums with more than 256 variants in derive macro
This addresses #4361. Technically, we now support up to 2^32 variants, which is
the maximum for the canonical ABI. In practice, though, the derived code for
enums with even just 2^16 variants takes a prohibitively long time to compile.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* simplify `LowerExpander::expand_variant` code
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
When setting up a copy on write image, we add several seals, to prevent
the image from being resized or modified. Set all the seals in a single
call, rather than doing one call per seal.
* support variant, enum, and union derives
This is the second stage of implementing #4308. It adds support for deriving
variant, enum, and union impls for `ComponentType`, `Lift`, and `Lower`. It
also fixes derived record impls for generic `struct`s, which I had intended to
support in my previous commit, but forgot to test.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* deduplicate component-macro code
Thanks to @jameysharp for the suggestion!
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
* Wasmtime: disable unwind_info unless needed
fixes#4350
Otherwise wasm modules will be built with unwind info, even if
backtraces are disabled. This can get expensive in deeply recursive
modules.
* Wasmtime: test that disabling backtraces disables unwind_info
* fix: make sure we have unwind_info when the engine needs it
This commit updates the management of the `may_enter` flag in line with
WebAssembly/component-model#57. Namely the `may_enter` flag is now
exclusively managed in the `canon lift` function (which is
`TypedFunc::call`) and is only unset after post-return completes
successfully. This implements semantics where if any trap happens for
any reason (lifting, lowering, execution, imports, etc) then the
instance is considered permanently poisoned and can no longer be
entered.
Tests needed many updates to create new instances where previously the
same instance was reused after it had an erroneous state.
The more I read over this again the more I think that these should be
constants to explicitly indicate that we're supposed to be able to
optimize for them. Currently I'm predicting that adding memory64 support
will probably double the surface area of each trait (e.g. `lower32` and
`lower64`) rather than have a parameter passed around. This is in the
hopes that having specialized 32 and 64-bit paths will enable better
optimizations within each path instead of having to check all bounds
everywhere.
Additionally one day I'd like to have `fn load(bytes: &[u8;
Self::SIZE32])` but that doesn't work today in Rust.
* Implement `canon lower` of a `canon lift` function in the same component
This commit implements the "degenerate" logic for implementing a
function within a component that is lifted and then immediately lowered
again. In this situation the lowered function will immediately generate
a trap and doesn't need to implement anything else.
The implementation in this commit is somewhat heavyweight but I think is
probably justified moreso in future additions to the component model
rather than what exactly is here right now. It's not expected that this
"always trap" functionality will really be used all that often since it
would generally mean a buggy component, but the functionality plumbed
through here is hopefully going to be useful for implementing
component-to-component adapter trampolines.
Specifically this commit implements a strategy where the `canon.lower`'d
function is generated by Cranelift and simply has a single trap
instruction when called, doing nothing else. The main complexity comes
from juggling around all the data associated with these functions,
primarily plumbing through the traps into the `ModuleRegistry` to
ensure that the global `is_wasm_trap_pc` function returns `true` and at
runtime when we lookup information about the trap it's all readily
available (e.g. translating the trapping pc to a `TrapCode`).
* Fix non-component build
* Fix some offset calculations
* Only create one "always trap" per signature
Use an internal map to deduplicate during compilation.
This is the first stage of implementing
https://github.com/bytecodealliance/wasmtime/issues/4308, i.e. derive macros for
`ComponentType`, `Lift`, and `Lower` for composite types in the component model.
This stage only covers records; I expect the other composite types will follow a
similar pattern.
It borrows heavily from the work Jamey Sharp did in
https://github.com/bytecodealliance/wasmtime/pull/4217. Thanks for that, and
thanks to both Jamey and Alex Crichton for their excellent review feedback.
Thanks also to Brian for pairing up on the initial draft.
Signed-off-by: Joel Dice <joel.dice@fermyon.com>
Currently I don't know how we can reasonably implement this. Given all
the signatures of how we call functions and how functions are called on
the host there's no real feasible way that I know of to hook these two
up "seamlessly". This means that a component which reexports an imported
function can't be run in Wasmtime.
One of the main reasons for this is that when calling a component
function Wasmtime wants to lower arguments first and then have them
lifted when the host is called. With a reexport though there's not
actually anything to lower into so we'd sort of need something similar
to a table on the side or maybe a linear memory and that seems like it'd
get quite complicated quite quickly for not really all that much
benefit. As-such for now this simply returns a first-class error (rather
than the current panic) in situations like this.
* Implement lowered-then-lifted functions
This commit is a few features bundled into one, culminating in the
implementation of lowered-then-lifted functions for the component model.
It's probably not going to be used all that often but this is possible
within a valid component so Wasmtime needs to do something relatively
reasonable. The main things implemented in this commit are:
* Component instances are now assigned a `RuntimeComponentInstanceIndex`
to differentiate each one. This will be used in the future to detect
fusion (one instance lowering a function from another instance). For
now it's used to allocate separate `VMComponentFlags` for each
internal component instance.
* The `CoreExport<FuncIndex>` of lowered functions was changed to a
`CoreDef` since technically a lowered function can use another lowered
function as the callee. This ended up being not too difficult to plumb
through as everything else was already in place.
* A need arose to compile host-to-wasm trampolines which weren't already
present. Currently wasm in a component is always entered through a
host-to-wasm trampoline but core wasm modules are the source of all
the trampolines. In the case of a lowered-then-lifted function there
may not actually be any core wasm modules, so component objects now
contain necessary trampolines not otherwise provided by the core wasm
objects. This feature required splitting a new function into the
`Compiler` trait for creating a host-to-wasm trampoline. After doing
this core wasm compilation was also updated to leverage this which
further enabled compiling trampolines in parallel as opposed to the
previous synchronous compilation.
* Review comments
* Migrate from `winapi` to `windows-sys`
I believe that Microsoft itself is supporting the development of
`windows-sys` and it's also used by `cap-std` now so this switches
Wasmtime's dependencies on Windows APIs from the `winapi` crate to the
`windows-sys` crate. We still have `winapi` in our dependency graph but
that may get phased out over time.
* Make windows-sys a target-specific dependency
