This implements the s390x back-end portion of the solution for https://github.com/bytecodealliance/wasmtime/issues/4566 We now support both big- and little-endian vector lane order in code generation. The order used for a function is determined by the function's ABI: if it uses a Wasmtime ABI, it will use little-endian lane order, and big-endian lane order otherwise. (This ensures that all raw_bitcast instructions generated by both wasmtime and other cranelift frontends can always be implemented as a no-op.) Lane order affects the implementation of a number of operations: - Vector immediates - Vector memory load / store (in big- and little-endian variants) - Operations explicitly using lane numbers (insertlane, extractlane, shuffle, swizzle) - Operations implicitly using lane numbers (iadd_pairwise, narrow/widen, promote/demote, fcvt_low, vhigh_bits) In addition, when calling a function using a different lane order, we need to lane-swap all vector values passed or returned in registers. A small number of changes to common code were also needed: - Ensure we always select a Wasmtime calling convention on s390x in crates/cranelift (func_signature). - Fix vector immediates for filetests/runtests. In PR #4427, I attempted to fix this by byte-swapping the V128 value, but with the new scheme, we'd instead need to perform a per-lane byte swap. Since we do not know the actual type in write_to_slice and read_from_slice, this isn't easily possible. Revert this part of PR #4427 again, and instead just mark the memory buffer as little-endian when emitting the trampoline; the back-end will then emit correct code to load the constant. - Change a runtest in simd-bitselect-to-vselect.clif to no longer make little-endian lane order assumptions. - Remove runtests in simd-swizzle.clif that make little-endian lane order assumptions by relying on implicit type conversion when using a non-i16x8 swizzle result type (this feature should probably be removed anyway). Tested with both wasmtime and cg_clif.
224 lines
8.3 KiB
Rust
224 lines
8.3 KiB
Rust
//! Support for compiling with Cranelift.
|
|
//!
|
|
//! This crate provides an implementation of the `wasmtime_environ::Compiler`
|
|
//! and `wasmtime_environ::CompilerBuilder` traits.
|
|
|
|
use cranelift_codegen::binemit;
|
|
use cranelift_codegen::ir;
|
|
use cranelift_codegen::isa::{unwind::UnwindInfo, CallConv, TargetIsa};
|
|
use cranelift_entity::PrimaryMap;
|
|
use cranelift_wasm::{DefinedFuncIndex, FuncIndex, WasmFuncType, WasmType};
|
|
use target_lexicon::{Architecture, CallingConvention};
|
|
use wasmtime_environ::{
|
|
FilePos, FunctionInfo, InstructionAddressMap, ModuleTranslation, ModuleTypes, TrapInformation,
|
|
};
|
|
|
|
pub use builder::builder;
|
|
|
|
mod builder;
|
|
mod compiler;
|
|
mod debug;
|
|
mod func_environ;
|
|
mod obj;
|
|
|
|
type CompiledFunctions = PrimaryMap<DefinedFuncIndex, CompiledFunction>;
|
|
|
|
/// Compiled function: machine code body, jump table offsets, and unwind information.
|
|
#[derive(Default)]
|
|
pub struct CompiledFunction {
|
|
/// The machine code for this function.
|
|
body: Vec<u8>,
|
|
|
|
/// The unwind information.
|
|
unwind_info: Option<UnwindInfo>,
|
|
|
|
/// Information used to translate from binary offsets back to the original
|
|
/// location found in the wasm input.
|
|
address_map: FunctionAddressMap,
|
|
|
|
/// Metadata about traps in this module, mapping code offsets to the trap
|
|
/// that they may cause.
|
|
traps: Vec<TrapInformation>,
|
|
|
|
relocations: Vec<Relocation>,
|
|
value_labels_ranges: cranelift_codegen::ValueLabelsRanges,
|
|
sized_stack_slots: ir::StackSlots,
|
|
|
|
// TODO: Add dynamic_stack_slots?
|
|
info: FunctionInfo,
|
|
}
|
|
|
|
/// Function and its instructions addresses mappings.
|
|
#[derive(Debug, Clone, PartialEq, Eq, Default)]
|
|
struct FunctionAddressMap {
|
|
/// An array of data for the instructions in this function, indicating where
|
|
/// each instruction maps back to in the original function.
|
|
///
|
|
/// This array is sorted least-to-greatest by the `code_offset` field.
|
|
/// Additionally the span of each `InstructionAddressMap` is implicitly the
|
|
/// gap between it and the next item in the array.
|
|
instructions: Box<[InstructionAddressMap]>,
|
|
|
|
/// Function's initial offset in the source file, specified in bytes from
|
|
/// the front of the file.
|
|
start_srcloc: FilePos,
|
|
|
|
/// Function's end offset in the source file, specified in bytes from
|
|
/// the front of the file.
|
|
end_srcloc: FilePos,
|
|
|
|
/// Generated function body offset if applicable, otherwise 0.
|
|
body_offset: usize,
|
|
|
|
/// Generated function body length.
|
|
body_len: u32,
|
|
}
|
|
|
|
/// A record of a relocation to perform.
|
|
#[derive(Debug, Clone, PartialEq, Eq)]
|
|
struct Relocation {
|
|
/// The relocation code.
|
|
reloc: binemit::Reloc,
|
|
/// Relocation target.
|
|
reloc_target: RelocationTarget,
|
|
/// The offset where to apply the relocation.
|
|
offset: binemit::CodeOffset,
|
|
/// The addend to add to the relocation value.
|
|
addend: binemit::Addend,
|
|
}
|
|
|
|
/// Destination function. Can be either user function or some special one, like `memory.grow`.
|
|
#[derive(Debug, Copy, Clone, PartialEq, Eq)]
|
|
enum RelocationTarget {
|
|
/// The user function index.
|
|
UserFunc(FuncIndex),
|
|
/// A compiler-generated libcall.
|
|
LibCall(ir::LibCall),
|
|
}
|
|
|
|
/// Creates a new cranelift `Signature` with no wasm params/results for the
|
|
/// given calling convention.
|
|
///
|
|
/// This will add the default vmctx/etc parameters to the signature returned.
|
|
fn blank_sig(isa: &dyn TargetIsa, call_conv: CallConv) -> ir::Signature {
|
|
let pointer_type = isa.pointer_type();
|
|
let mut sig = ir::Signature::new(call_conv);
|
|
// Add the caller/callee `vmctx` parameters.
|
|
sig.params.push(ir::AbiParam::special(
|
|
pointer_type,
|
|
ir::ArgumentPurpose::VMContext,
|
|
));
|
|
sig.params.push(ir::AbiParam::new(pointer_type));
|
|
return sig;
|
|
}
|
|
|
|
/// Returns the default calling convention for the `isa` provided.
|
|
///
|
|
/// Note that this calling convention is used for exported functions.
|
|
fn wasmtime_call_conv(isa: &dyn TargetIsa) -> CallConv {
|
|
match isa.triple().default_calling_convention() {
|
|
Ok(CallingConvention::AppleAarch64) => CallConv::WasmtimeAppleAarch64,
|
|
Ok(CallingConvention::SystemV) | Err(()) => CallConv::WasmtimeSystemV,
|
|
Ok(CallingConvention::WindowsFastcall) => CallConv::WasmtimeFastcall,
|
|
Ok(unimp) => unimplemented!("calling convention: {:?}", unimp),
|
|
}
|
|
}
|
|
|
|
/// Appends the types of the `wasm` function signature into the `sig` signature
|
|
/// provided.
|
|
///
|
|
/// Typically the `sig` signature will have been created from [`blank_sig`]
|
|
/// above.
|
|
fn push_types(isa: &dyn TargetIsa, sig: &mut ir::Signature, wasm: &WasmFuncType) {
|
|
let cvt = |ty: &WasmType| ir::AbiParam::new(value_type(isa, *ty));
|
|
sig.params.extend(wasm.params().iter().map(&cvt));
|
|
sig.returns.extend(wasm.returns().iter().map(&cvt));
|
|
}
|
|
|
|
/// Returns the corresponding cranelift type for the provided wasm type.
|
|
fn value_type(isa: &dyn TargetIsa, ty: WasmType) -> ir::types::Type {
|
|
match ty {
|
|
WasmType::I32 => ir::types::I32,
|
|
WasmType::I64 => ir::types::I64,
|
|
WasmType::F32 => ir::types::F32,
|
|
WasmType::F64 => ir::types::F64,
|
|
WasmType::V128 => ir::types::I8X16,
|
|
WasmType::FuncRef | WasmType::ExternRef => reference_type(ty, isa.pointer_type()),
|
|
}
|
|
}
|
|
|
|
/// Returns a cranelift signature suitable to indirectly call the wasm signature
|
|
/// specified by `wasm`.
|
|
///
|
|
/// This will implicitly use the default calling convention for `isa` since to
|
|
/// indirectly call a wasm function it must be possibly exported somehow (e.g.
|
|
/// this assumes the function target to call doesn't use the "fast" calling
|
|
/// convention).
|
|
fn indirect_signature(isa: &dyn TargetIsa, wasm: &WasmFuncType) -> ir::Signature {
|
|
let mut sig = blank_sig(isa, wasmtime_call_conv(isa));
|
|
push_types(isa, &mut sig, wasm);
|
|
return sig;
|
|
}
|
|
|
|
/// Returns the cranelift fucntion signature of the function specified.
|
|
///
|
|
/// Note that this will determine the calling convention for the function, and
|
|
/// namely includes an optimization where functions never exported from a module
|
|
/// use a custom theoretically faster calling convention instead of the default.
|
|
fn func_signature(
|
|
isa: &dyn TargetIsa,
|
|
translation: &ModuleTranslation,
|
|
types: &ModuleTypes,
|
|
index: FuncIndex,
|
|
) -> ir::Signature {
|
|
let func = &translation.module.functions[index];
|
|
let call_conv = match translation.module.defined_func_index(index) {
|
|
// If this is a defined function in the module and it doesn't escape
|
|
// then we can optimize this function to use the fastest calling
|
|
// convention since it's purely an internal implementation detail of
|
|
// the module itself.
|
|
Some(_idx) if !func.is_escaping() => {
|
|
let on_apple_aarch64 = isa
|
|
.triple()
|
|
.default_calling_convention()
|
|
.unwrap_or(CallingConvention::SystemV)
|
|
== CallingConvention::AppleAarch64;
|
|
|
|
if on_apple_aarch64 {
|
|
// FIXME: We need an Apple-specific calling convention, so that
|
|
// Cranelift's ABI implementation generates unwinding directives
|
|
// about pointer authentication usage, so we can't just use
|
|
// `CallConv::Fast`.
|
|
CallConv::WasmtimeAppleAarch64
|
|
} else if isa.triple().architecture == Architecture::S390x {
|
|
// On S390x we need a Wasmtime calling convention to ensure
|
|
// we're using little-endian vector lane order.
|
|
wasmtime_call_conv(isa)
|
|
} else {
|
|
CallConv::Fast
|
|
}
|
|
}
|
|
|
|
// ... otherwise if it's an imported function or if it's a possibly
|
|
// exported function then we use the default ABI wasmtime would
|
|
// otherwise select.
|
|
_ => wasmtime_call_conv(isa),
|
|
};
|
|
let mut sig = blank_sig(isa, call_conv);
|
|
push_types(isa, &mut sig, &types[func.signature]);
|
|
return sig;
|
|
}
|
|
|
|
/// Returns the reference type to use for the provided wasm type.
|
|
fn reference_type(wasm_ty: cranelift_wasm::WasmType, pointer_type: ir::Type) -> ir::Type {
|
|
match wasm_ty {
|
|
cranelift_wasm::WasmType::FuncRef => pointer_type,
|
|
cranelift_wasm::WasmType::ExternRef => match pointer_type {
|
|
ir::types::I32 => ir::types::R32,
|
|
ir::types::I64 => ir::types::R64,
|
|
_ => panic!("unsupported pointer type"),
|
|
},
|
|
_ => panic!("unsupported Wasm reference type"),
|
|
}
|
|
}
|