We can encode more constants into 12-bit immediates if we do the following
rewrite for comparisons with odd constants:
A >= B + 1
==> A - 1 >= B
==> A > B
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
* aarch64: Fix incorrect masking for small types on bmask
`bmask` was accidentally relying on the uppermost bits of the register
for small types.
This was found by fuzzgen, when it generated a shift left followed by
a bmask, the shift left shifted the bits out of the range of the input
type (i8), however these are not automatically cleared since they
remained inside the 32 bits of the register.
That caused issues when the bmask tried to compare the whole register
instead of just the bottom bits. The solution here is to mask the upper
bits for small types.
* aarch64: Emit 32bit cmp on bmask
This fixes an issue where bmask was accidentally comparing the
upper bits of the register by always using a 64bit cmp.
* riscv: Mask high bits in bmask
* riscv: Add compile tests for br{z,nz}
* riscv: Use shifts to mask 32bit values
This produces less code than the AND since that version needs to
load an immediate constant from memory.
* cranelift: Update test input to hexadecimal values
This makes it a bit more clear what is being tested.
* riscv: Use addiw for masking 32 bit values
Co-authored-by: Trevor Elliott <telliott@fastly.com>
* aarch64: Update bmask rule priority
Co-authored-by: Trevor Elliott <telliott@fastly.com>
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Port branches to ISLE (AArch64)
Ported the existing implementations of the following opcodes for AArch64
to ISLE:
- `Brz`
- `Brnz`
- `Brif`
- `Brff`
- `BrIcmp`
- `Jump`
- `BrTable`
Copyright (c) 2022 Arm Limited
* Remove dead code
Copyright (c) 2022 Arm Limited
Ported the existing implementations of the following opcodes for AArch64
to ISLE:
- `Trueif`
- `Trueff`
- `Trapif`
- `Trapff`
- `Select`
- `Selectif`
- `SelectifSpectreGuard`
Copyright (c) 2022 Arm Limited
Improved the instruction lowering for the following opcodes on AArch64,
and introduced support for converting to integers less than 32-bits wide
as per the docs:
- `FcvtToSintSat`
- `FcvtToUintSat`
Copyright (c) 2022 Arm Limited
* Vector bitcast support (AArch64 & Interpreter)
Implemented support for `bitcast` on vector values for AArch64 and the
interpreter.
Also corrected the verifier to ensure that the size, in bits, of the input and
output types match for a `bitcast`, per the docs.
Copyright (c) 2022 Arm Limited
* `I128` same-type bitcast support
Copyright (c) 2022 Arm Limited
* Directly return input for 64-bit GPR<=>GPR bitcast
Copyright (c) 2022 Arm Limited
* Port `icmp` to ISLE (AArch64)
Ported the existing implementation of `icmp` (and, by extension, the
`lower_icmp` function) to ISLE for AArch64.
Copyright (c) 2022 Arm Limited
* Allow 'producer chains', eliminating `Nop0`s
Copyright (c) 2022 Arm Limited
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
* Initial forward-edge CFI implementation
Give the user the option to start all basic blocks that are targets
of indirect branches with the BTI instruction introduced by the
Branch Target Identification extension to the Arm instruction set
architecture.
Copyright (c) 2022, Arm Limited.
* Refactor `from_artifacts` to avoid second `make_executable` (#1)
This involves "parsing" twice but this is parsing just the header of an
ELF file so it's not a very intensive operation and should be ok to do
twice.
* Address the code review feedback
Copyright (c) 2022, Arm Limited.
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
The previous implementation assumed that nothing had clobbered the
LR register since the current function had started executing, so
it would be incorrect for a non-leaf function, for example, that
contains the `get_return_address` operation right after a call.
The operation is valid only if the `preserve_frame_pointers` flag
is enabled, which implies that the presence of a frame record on
the stack is guaranteed.
Copyright (c) 2022, Arm Limited.
Previously the implementations of the various atomic memory IR operations
ignored the memory operation flags that were passed.
Copyright (c) 2022, Arm Limited.
Co-authored-by: Chris Fallin <chris@cfallin.org>
This PR removes all uses of modify-operands in the aarch64 backend,
replacing them with reused-input operands instead. This has the nice
effect of removing a bunch of move instructions and more clearly
representing inputs and outputs.
This PR also removes the explicit use of pinned vregs in the aarch64
backend, instead using fixed-register constraints on the operands when
insts or pseudo-inst sequences require certain registers.
This is the second PR in the regalloc-semantics cleanup series; after
the remaining backend (s390x) and the ABI code are cleaned up as well,
we'll be able to simplify the regalloc2 frontend.
Ported the existing implementation of `fcmp` for AArch64 to ISLE.
This also ports the `lower_vector_comparison` method to ISLE.
Copyright (c) 2022 Arm Limited
This retains `lower_amode` in the handwritten code (@akirilov-arm
reports that there is an upcoming patch to port this), but tweaks it
slightly to take a `Value` rather than an `Inst`.
* Port `Fcopysign`..``FcvtToSintSat` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `Fcopysign`
- Also introduced missing support for `fcopysign` on vector values, as
per the docs.
- This introduces the vector encoding for the `SLI` machine
instruction.
- `FcvtToUint`
- `FcvtToSint`
- `FcvtFromUint`
- `FcvtFromSint`
- `FcvtToUintSat`
- `FcvtToSintSat`
Copyright (c) 2022 Arm Limited
* Document helpers and abstract conversion checks
Ported the existing implementations of the following opcodes for AArch64
to ISLE, and implemented support for 64-bit vectors (per the docs):
- `SwidenLow`
- `SwidenHigh`
- `UwidenLow`
- `UwidenHigh`
Also ported `WideningPairwiseDotProductS` as-is.
Copyright (c) 2022 Arm Limited
* Port `vconst` to ISLE (AArch64)
Ported the existing implementation of `vconst` to ISLE for AArch64, and
added support for 64-bit vector constants.
Also introduced 64-bit `vconst` support to the interpreter.
Copyright (c) 2022 Arm Limited
* Replace if-chains with match statements
Copyright (c) 2022 Arm Limited
Also, adjust the tests that are executed on that platform. Finally,
fix a bug with obtaining backtraces when back-edge CFI is enabled.
Copyright (c) 2022, Arm Limited.
Ported the existing implementations of the following opcodes on AArch64
to ISLE:
- `AvgRound`
- Also introduced support for `i64x2` vectors, as per the docs.
- `SqmulRoundSat`
Copyright (c) 2022 Arm Limited
Separates the following opcodes for AArch64 into a separate `VecALUModOp` enum,
which is emitted via the `VecRRRMod` instruction. This separates vector ALU
instructions which modify a register from instructions which write to a new register:
- `Bsl`
- `Fmla`
Addresses [a discussion](https://github.com/bytecodealliance/wasmtime/pull/4608#discussion_r937975581) in #4608.
Copyright (c) 2022 Arm Limited
* Convert `fma`, `valltrue` & `vanytrue` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `fma`
- Introduced missing support for `fma` on vector values, as per the
docs.
- `valltrue`
- `vanytrue`
Also fixed `fcmp` on scalar values in the interpreter, and enabled
interpreter tests in `simd-fma.clif`.
This introduces the `FMLA` machine instruction.
Copyright (c) 2022 Arm Limited
* Add comments for `Fmla` and `Bsl`
Copyright (c) 2022 Arm Limited
* Port `Shuffle` to ISLE (AArch64)
Ported the existing implementation of `Shuffle` for AArch64 to ISLE.
Copyright (c) 2022 Arm Limited
* Cleanup by shadowing `rn`, `rn2`, and `_`
Copyright (c) 2022 Arm Limited
Give the user the option to sign and to authenticate function
return addresses with the operations introduced by the Pointer
Authentication extension to the Arm instruction set architecture.
Copyright (c) 2021, Arm Limited.
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
* Cranelift: Don't `emit` inside lowering rules in aarch64
The lowering rules should be "pure" and side-effect free, using helpers defined
in `inst.isle` to perform actual side effects like emitting instructions.
* Cranelift: use 80 width for section separators in aarch64 lowering rules
* Support shadowing in isle
* Re-run the isle build.rs if the examples change
* Print error messages when isle tests fail
* Move run tests
* Refactor `let` uses that don't need to introduce unique names
Ported the existing implementation of the following Opcodes for AArch64
to ISLE:
- `Fence`
- `IsNull`
- `IsInvalid`
- `Debugtrap`
Copyright (c) 2022 Arm Limited
* [AArch64] Port SIMD narrowing to ISLE
Fvdemote, snarrow, unarrow and uunarrow.
Also refactor the aarch64 instructions descriptions to parameterize
on ScalarSize instead of using different opcodes.
The zero_value pure constructor has been introduced and used by the
integer narrow operations and it replaces, and extends, the compare
zero patterns.
Copright (c) 2022, Arm Limited.
* use short 'if' patterns
Converted the existing implementations for the following opcodes to ISLE
on AArch64:
- `sqrt`
- `fneg`
- `fabs`
- `fpromote`
- `fdemote`
- `ceil`
- `floor`
- `trunc`
- `nearest`
Copyright (c) 2022 Arm Limited
Converted the existing implementations for the following Opcodes to ISLE on AArch64:
- `fadd`
- `fsub`
- `fmul`
- `fdiv`
- `fmin`
- `fmax`
- `fmin_pseudo`
- `fmax_pseudo`
Copyright (c) 2022 Arm Limited
