* Add narrower and wider constraints to the instruction DSL
* Add docs to narrower/wider operands
* Update cranelift/codegen/meta/src/cdsl/instructions.rs
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix assertion message
* Simplify upper bounds for the wider constraint
* Remove additional unnecessary cases in the verifier
* Remove unused variables
* Remove changes to is_ctrl_typevar_candidate
These changes were only necessary when the type returned by an
instruction was a variable constrained by narrow or widen. As we have
switched to requiring that constraints must appear on argument types and
not return types, these changes were not longer necessary.
---------
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Change CLIF `shuffle` to validate lane indices
Previously the CLIF `shuffle` instruction did not perform any validation
on the lane shuffle mask and specified that out-of-bounds lanes always
returned 0 as the value. This behavior though is not required by
WebAssembly which validates that lane indices are always in-bounds.
Additionally since these are static immediates even other code
generators should be able to verify that the immediates are in-bounds.
As a result this commit updates the definition of the `shuffle`
instruction to specify that all byte immediates must be in-bounds in the
range of [0, 32). The verifier has been updated and some test cases have
been removed that were testing this functionality.
Closes#5989
* Only generate valid shuffle immediates in fuzzer
We've adopted this pattern in Cranelift's instruction definitions where
we let-bind some calls to `Operand::new` and then later use them in one
or more calls to `Inst::new`.
That pattern has two problems:
- It puts the type of each operand somewhere potentially far removed
from the instruction in which it's used.
- We let-bind the same name for many different operands, compounding the
first problem by making it harder to find _which_ definition is used.
So instead this commit removes all let-bindings for operand definitions
and constructs a new `Operand` every time.
Constructing an `Operand` at every use means we duplicate some
documentation strings, but not all that many of them as it turns out.
I've left the let-bound type-sets alone, so those are currently still
shared across many instructions. They have some of the same problems and
should be reviewed as well.
* Remove the Cranelift `vselect` instruction
This instruction is documented as selecting lanes based on the "truthy"
value of the condition lane, but the current status of the
implementation of this instruction is:
* x64 - uses the high bit for `f32x4` and `f64x2` and otherwise uses the
high bit of each byte doing a byte-wise lane select rather than
whatever the controlling type is.
* AArch64 - this is the same as `bitselect` which is a bit-wise
selection rather than a lane-wise selection.
* s390x - this is the same as AArch64, a bit-wise selection rather than
lane-wise.
* interpreter - the interpreter implements the documented semantics of
selecting based on "truthy" values.
Coupled with the status of the implementation is the fact that this
instruction is not used by WebAssembly SIMD today either. The only use
of this instruction in Cranelift is the nan-canonicalization pass. By
moving nan-canonicalization to `bitselect`, since that has the desired
semantics, there's no longer any need for `vselect`.
Given this situation this commit subsqeuently removes `vselect` and all
usage of it throughout Cranelift.
Closes#5917
* Review comments
* Bring back vselect opts as bitselect opts
* Clean up vselect usage in the interpreter
* Move bitcast in nan canonicalization
* Add a comment about float optimization
* Initial support for the Relaxed SIMD proposal
This commit adds initial scaffolding and support for the Relaxed SIMD
proposal for WebAssembly. Codegen support is supported on the x64 and
AArch64 backends on this time.
The purpose of this commit is to get all the boilerplate out of the way
in terms of plumbing through a new feature, adding tests, etc. The tests
are copied from the upstream repository at this time while the
WebAssembly/testsuite repository hasn't been updated.
A summary of changes made in this commit are:
* Lowerings for all relaxed simd opcodes have been added, currently all
exhibiting deterministic behavior. This means that few lowerings are
optimal on the x86 backend, but on the AArch64 backend, for example,
all lowerings should be optimal.
* Support is added to codegen to, eventually, conditionally generate
different code based on input codegen flags. This is intended to
enable codegen to more efficient instructions on x86 by default, for
example, while still allowing embedders to force
architecture-independent semantics and behavior. One good example of
this is the `f32x4.relaxed_fmadd` instruction which when deterministic
forces the `fma` instruction, but otherwise if the backend doesn't
have support for `fma` then intermediate operations are performed
instead.
* Lowerings of `iadd_pairwise` for `i16x8` and `i32x4` were added to the
x86 backend as they're now exercised by the deterministic lowerings of
relaxed simd instructions.
* Sample codegen tests for added for x86 and aarch64 for some relaxed
simd instructions.
* Wasmtime embedder support for the relaxed-simd proposal and forcing
determinism have been added to `Config` and the CLI.
* Support has been added to the `*.wast` runtime execution for the
`(either ...)` matcher used in the relaxed-simd proposal.
* Tests for relaxed-simd are run both with a default `Engine` as well as
a "force deterministic" `Engine` to test both configurations.
* All tests from the upstream repository were copied into Wasmtime.
These tests should be deleted when WebAssembly/testsuite is updated.
* x64: Add x86-specific lowerings for relaxed simd
This commit builds on the prior commit and adds an array of `x86_*`
instructions to Cranelift which have semantics that match their
corresponding x86 equivalents. Translation for relaxed simd is then
additionally updated to conditionally generate different CLIF for
relaxed simd instructions depending on whether the target is x86 or not.
This means that for AArch64 no changes are made but for x86 most relaxed
instructions now lower to some x86-equivalent with slightly different
semantics than the "deterministic" lowering.
* Add libcall support for fma to Wasmtime
This will be required to implement the `f32x4.relaxed_madd` instruction
(and others) when an x86 host doesn't specify the `has_fma` feature.
* Ignore relaxed-simd tests on s390x and riscv64
* Enable relaxed-simd tests on s390x
* Update cranelift/codegen/meta/src/shared/instructions.rs
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
* Add a FIXME from review
* Add notes about deterministic semantics
* Don't default `has_native_fma` to `true`
* Review comments and rebase fixes
---------
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
This instruction is only defined with i8x16 inputs and outputs so
there's no need for a type variable, so shadow the otherwise-generic `a`
result with a concrete i8x16 type.
This was added for the wasm SIMD proposal but I've been poking around at
this recently and the instruction can instead be represented by its
component parts with the same semantics I believe. This commit removes
the instruction and instead represents it with the existing
`iadd_pairwise` instruction (among others) and updates backends to with
new pattern matches to have the same codegen as before.
This interestingly entirely removed the codegen rule with no replacement
on the AArch64 backend as the existing rules all existed to produce the
same codegen.
Rework br_table to use BlockCall, allowing us to avoid adding new nodes during ssa construction to hold block arguments. Additionally, many places where we previously matched on InstructionData to extract branch destinations can be replaced with a use of branch_destination or branch_destination_mut.
* Cranelift: Introduce the `tail` calling convention
This is an unstable-ABI calling convention that we will eventually use to
support Wasm tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Introduce the `return_call` and `return_call_indirect` instructions
These will be used to implement tail calls for Wasm and any other language
targeting CLIF. The `return_call_indirect` instruction differs from the Wasm
instruction of the same name by taking a native address callee rather than a
Wasm function index.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Implement verification rules for `return_call[_indirect]`
They must:
* have the same return types between the caller and callee,
* have the same calling convention between caller and callee,
* and that calling convention must support tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* cargo fmt
---------
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
Remove the boolean parameters from the instruction builder functions, as they were only ever used with true. Additionally, change the returns and branches functions to imply terminates_block.
Add a conditional branch instruction with two targets: brif. This instruction will eventually replace brz and brnz, as it encompasses the behavior of both.
This PR also changes the InstructionData layout for instruction formats that hold BlockCall values, taking the same approach we use for Value arguments. This allows branch_destination to return a slice to the BlockCall values held in the instruction, rather than requiring that we pattern match on InstructionData to fetch the then/else blocks.
Function generation for fuzzing has been updated to generate uses of brif, and I've run the cranelift-fuzzgen target locally for hours without triggering any new failures.
Add a new type BlockCall that represents the pair of a block name with arguments to be passed to it. (The mnemonic here is that it looks a bit like a function call.) Rework the implementation of jump, brz, and brnz to use BlockCall instead of storing the block arguments as varargs in the instruction's ValueList.
To ensure that we're processing block arguments from BlockCall values in instructions, three new functions have been introduced on DataFlowGraph that both sets of arguments:
inst_values - returns an iterator that traverses values in the instruction and block arguments
map_inst_values - applies a function to each value in the instruction and block arguments
overwrite_inst_values - overwrite all values in an instruction and block arguments with values from the iterator
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Switch duplicate loads w/ dynamic memories test to `min_size = 0`
This test was accidentally hitting a special case for bounds checks for when we
know that `offset + access_size < min_size` and can skip some steps. This
commit changes the `min_size` of the memory to zero so that we are forced to do
fully general bounds checks.
* Cranelift: Mark `uadd_overflow_trap` as okay for GVN
Although this improves our test sequence for duplicate loads with dynamic
memories, it unfortunately doesn't have any effect on sightglass benchmarks:
```
instantiation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[34448 35607.23 37158] gvn_uadd_overflow_trap.so
[34566 35734.05 36585] main.so
instantiation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[44101 60449.62 92712] gvn_uadd_overflow_trap.so
[44011 60436.37 92690] main.so
instantiation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[35595 36675.72 38153] gvn_uadd_overflow_trap.so
[35440 36670.42 37993] main.so
compilation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[17370195 17405125.62 17471222] gvn_uadd_overflow_trap.so
[17369324 17404859.43 17470725] main.so
execution :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[7055720520 7055886880.32 7056265930] gvn_uadd_overflow_trap.so
[7055719554 7055843809.33 7056193289] main.so
compilation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[683589861 683767276.00 684098366] gvn_uadd_overflow_trap.so
[683590024 683767998.02 684097885] main.so
execution :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[46436883 46437135.10 46437823] gvn_uadd_overflow_trap.so
[46436883 46437087.67 46437785] main.so
compilation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[126522461 126565812.58 126647044] gvn_uadd_overflow_trap.so
[126522176 126565757.75 126647522] main.so
execution :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[653010531 653010533.03 653010544] gvn_uadd_overflow_trap.so
[653010531 653010533.18 653010537] main.so
```
* cranelift-codegen-meta: Rename `side_effects_okay_for_gvn` to `side_effects_idempotent`
* cranelift-filetests: Ensure there is a trailing newline for blessed Wasm tests
* Cranelift: Make spectre guards GVN-able
While these instructions have a side effect that is otherwise invisible to the
optimizer, the side effect in question is idempotent, so it can be de-duplicated
by GVN.
* Cranelift: Run redundant load replacement and GVN twice
This allows us to actually replace redundant Wasm loads with dynamic memories.
While this improves our hand-crafted test sequences, it doesn't seem to have any
improvement on sightglass benchmarks run with dynamic memories, however it also
isn't a hit to compilation times, so seems generally good to land anyways:
```
$ cargo run --release -- benchmark -e ~/scratch/once.so -e ~/scratch/twice.so -m insts-retired --processes 20 --iterations-per-process 3 --engine-flags="--static-memory-maximum-size 0" -- benchmarks/default.suite
compilation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[683595240 683768610.53 684097577] once.so
[683597068 700115966.83 1664907164] twice.so
instantiation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[44107 60411.07 92785] once.so
[44138 59552.32 92097] twice.so
compilation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[17369916 17404839.78 17471458] once.so
[17369935 17625713.87 30700150] twice.so
compilation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[126523640 126566170.80 126648265] once.so
[126523076 127174580.30 163145149] twice.so
instantiation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[34569 35686.25 36513] once.so
[34651 35749.97 36953] twice.so
instantiation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[35146 36639.10 37707] once.so
[34472 36580.82 38431] twice.so
execution :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[7055720115 7055841324.82 7056180024] once.so
[7055717681 7055877095.85 7056225217] twice.so
execution :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[46436881 46437081.28 46437691] once.so
[46436883 46437127.68 46437766] twice.so
execution :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[653010530 653010533.27 653010539] once.so
[653010531 653010532.95 653010538] twice.so
```
* cranelift-wasm: translate Wasm loads into lower-level CLIF operations
Rather than using `heap_{load,store,addr}`.
* cranelift: Remove the `heap_{addr,load,store}` instructions
These are now legalized in the `cranelift-wasm` frontend.
* cranelift: Remove the `ir::Heap` entity from CLIF
* Port basic memory operation tests to .wat filetests
* Remove test for verifying CLIF heaps
* Remove `heap_addr` from replace_branching_instructions_and_cfg_predecessors.clif test
* Remove `heap_addr` from readonly.clif test
* Remove `heap_addr` from `table_addr.clif` test
* Remove `heap_addr` from the simd-fvpromote_low.clif test
* Remove `heap_addr` from simd-fvdemote.clif test
* Remove `heap_addr` from the load-op-store.clif test
* Remove the CLIF heap runtest
* Remove `heap_addr` from the global_value.clif test
* Remove `heap_addr` from fpromote.clif runtests
* Remove `heap_addr` from fdemote.clif runtests
* Remove `heap_addr` from memory.clif parser test
* Remove `heap_addr` from reject_load_readonly.clif test
* Remove `heap_addr` from reject_load_notrap.clif test
* Remove `heap_addr` from load_readonly_notrap.clif test
* Remove `static-heap-without-guard-pages.clif` test
Will be subsumed when we port `make-heap-load-store-tests.sh` to generating
`.wat` tests.
* Remove `static-heap-with-guard-pages.clif` test
Will be subsumed when we port `make-heap-load-store-tests.sh` over to `.wat`
tests.
* Remove more heap tests
These will be subsumed by porting `make-heap-load-store-tests.sh` over to `.wat`
tests.
* Remove `heap_addr` from `simple-alias.clif` test
* Remove `heap_addr` from partial-redundancy.clif test
* Remove `heap_addr` from multiple-blocks.clif test
* Remove `heap_addr` from fence.clif test
* Remove `heap_addr` from extends.clif test
* Remove runtests that rely on heaps
Heaps are not a thing in CLIF or the interpreter anymore
* Add generated load/store `.wat` tests
* Enable memory-related wasm features in `.wat` tests
* Remove CLIF heap from fcmp-mem-bug.clif test
* Add a mode for compiling `.wat` all the way to assembly in filetests
* Also generate WAT to assembly tests in `make-load-store-tests.sh`
* cargo fmt
* Reinstate `f{de,pro}mote.clif` tests without the heap bits
* Remove undefined doc link
* Remove outdated SVG and dot file from docs
* Add docs about `None` returns for base address computation helpers
* Factor out `env.heap_access_spectre_mitigation()` to a local
* Expand docs for `FuncEnvironment::heaps` trait method
* Restore f{de,pro}mote+load clif runtests with stack memory
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
* Cranelift: Define `heap_load` and `heap_store` instructions
* Cranelift: Implement interpreter support for `heap_load` and `heap_store`
* Cranelift: Add a suite runtests for `heap_{load,store}`
There are so many knobs we can twist for heaps and I wanted to exhaustively test
all of them, so I wrote a script to generate the tests. I've checked in the
script in case we want to make any changes in the future, but I don't think it
is worth adding this to CI to check that scripts are up to date or anything like
that.
* Review feedback
* cranelift: Cleanup `fdemote`/`fpromote` tests
* cranelift: Fix `fdemote`/`fpromote` instruction docs
The verifier fails if the input and output types are the same
for these instructions
* cranelift: Fix `fdemote`/`fpromote` in the interpreter
* fuzzgen: Add `fdemote`/`fpromote`
* Cranelift: Make `heap_addr` return calculated `base + index + offset`
Rather than return just the `base + index`.
(Note: I've chosen to use the nomenclature "index" for the dynamic operand and
"offset" for the static immediate.)
This move the addition of the `offset` into `heap_addr`, instead of leaving it
for the subsequent memory operation, so that we can Spectre-guard the full
address, and not allow speculative execution to read the first 4GiB of memory.
Before this commit, we were effectively doing
load(spectre_guard(base + index) + offset)
Now we are effectively doing
load(spectre_guard(base + index + offset))
Finally, this also corrects `heap_addr`'s documented semantics to say that it
returns an address that will trap on access if `index + offset + access_size` is
out of bounds for the given heap, rather than saying that the `heap_addr` itself
will trap. This matches the implemented behavior for static memories, and after
https://github.com/bytecodealliance/wasmtime/pull/5190 lands (which is blocked
on this commit) will also match the implemented behavior for dynamic memories.
* Update heap_addr docs
* Factor out `offset + size` to a helper
Add a MemFlags operand to the bitcast instruction, where only the
`big` and `little` flags are accepted. These define the lane order
to be used when casting between types of different lane counts.
Update all users to pass an appropriate MemFlags argument.
Implement lane swaps where necessary in the s390x back-end.
This is the final part necessary to fix
https://github.com/bytecodealliance/wasmtime/issues/4566.
This branch removes the trapif and trapff instructions, in favor of using an explicit comparison and trapnz. This moves us closer to removing iflags and fflags, but introduces the need to implement instructions like iadd_cout in the x64 and aarch64 backends.
- Allow bitcast for vectors with differing lane widths
- Remove raw_bitcast IR instruction
- Change all users of raw_bitcast to bitcast
- Implement support for no-op bitcast cases across backends
This implements the second step of the plan outlined here:
https://github.com/bytecodealliance/wasmtime/issues/4566#issuecomment-1234819394
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
* cranelift: Remove iconst.i128
* bugpoint: Report Changed when only one instruction is mutated
* cranelift: Fix egraph bxor rule
* cranelift: Remove some simple_preopt opts for i128
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Vector bitcast support (AArch64 & Interpreter)
Implemented support for `bitcast` on vector values for AArch64 and the
interpreter.
Also corrected the verifier to ensure that the size, in bits, of the input and
output types match for a `bitcast`, per the docs.
Copyright (c) 2022 Arm Limited
* `I128` same-type bitcast support
Copyright (c) 2022 Arm Limited
* Directly return input for 64-bit GPR<=>GPR bitcast
Copyright (c) 2022 Arm Limited
* cranelift: Remove of/nof overflow flags from icmp
Neither Wasmtime nor cg-clif use these flags under any circumstances.
From discussion on #3060 I see it's long been unclear what purpose these
flags served.
Fixes#3060, fixes#4406, and fixes #4875... by deleting all the code
that could have been buggy.
This changes the cranelift-fuzzgen input format by removing some IntCC
options, so I've gone ahead and enabled I128 icmp tests at the same
time. Since only the of/nof cases were failing before, I expect these to
work.
* Restore trapif tests
It's still useful to validate that iadd_ifcout's iflags result can be
forwarded correctly to trapif, and for that purpose it doesn't really
matter what condition code is checked.
Ported the existing implementations of the following opcodes on AArch64
to ISLE:
- `AvgRound`
- Also introduced support for `i64x2` vectors, as per the docs.
- `SqmulRoundSat`
Copyright (c) 2022 Arm Limited
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
* Allow 64-bit vectors and implement for interpreter
The AArch64 backend already supports 64-bit vectors; this simply allows
instructions to make use of that.
Implemented support for 64-bit vectors within the interpreter to allow
interpret runtests to use them.
Copyright (c) 2022 Arm Limited
* Disable 64-bit SIMD `iaddpairwise` tests on s390x
Copyright (c) 2022 Arm Limited
* cranelift: Restrict `br_table` to `i32` indices
In #4498 it was proposed that we should only accept `i32` indices
to `br_table`. The rationale for this is that larger types lead the
users to a false sense of flexibility (since we don't support jump
tables larger than u32's), and narrower types are not well tested
paths that would be safer if we removed them.
* cranelift: Reduce directly from i128 to i32 in Switch
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
