* Move `CompiledFunction` into wasmtime-cranelift
This commit moves the `wasmtime_environ::CompiledFunction` type into the
`wasmtime-cranelift` crate. This type has lots of Cranelift-specific
pieces of compilation and doesn't need to be generated by all Wasmtime
compilers. This replaces the usage in the `Compiler` trait with a
`Box<Any>` type that each compiler can select. Each compiler must still
produce a `FunctionInfo`, however, which is shared information we'll
deserialize for each module.
The `wasmtime-debug` crate is also folded into the `wasmtime-cranelift`
crate as a result of this commit. One possibility was to move the
`CompiledFunction` commit into its own crate and have `wasmtime-debug`
depend on that, but since `wasmtime-debug` is Cranelift-specific at this
time it didn't seem like it was too too necessary to keep it separate.
If `wasmtime-debug` supports other backends in the future we can
recreate a new crate, perhaps with it refactored to not depend on
Cranelift.
* Move wasmtime_environ::reference_type
This now belongs in wasmtime-cranelift and nowhere else
* Remove `Type` reexport in wasmtime-environ
One less dependency on `cranelift-codegen`!
* Remove `types` reexport from `wasmtime-environ`
Less cranelift!
* Remove `SourceLoc` from wasmtime-environ
Change the `srcloc`, `start_srcloc`, and `end_srcloc` fields to a custom
`FilePos` type instead of `ir::SourceLoc`. These are only used in a few
places so there's not much to lose from an extra abstraction for these
leaf use cases outside of cranelift.
* Remove wasmtime-environ's dep on cranelift's `StackMap`
This commit "clones" the `StackMap` data structure in to
`wasmtime-environ` to have an independent representation that that
chosen by Cranelift. This allows Wasmtime to decouple this runtime
dependency of stack map information and let the two evolve
independently, if necessary.
An alternative would be to refactor cranelift's implementation into a
separate crate and have wasmtime depend on that but it seemed a bit like
overkill to do so and easier to clone just a few lines for this.
* Define code offsets in wasmtime-environ with `u32`
Don't use Cranelift's `binemit::CodeOffset` alias to define this field
type since the `wasmtime-environ` crate will be losing the
`cranelift-codegen` dependency soon.
* Commit to using `cranelift-entity` in Wasmtime
This commit removes the reexport of `cranelift-entity` from the
`wasmtime-environ` crate and instead directly depends on the
`cranelift-entity` crate in all referencing crates. The original reason
for the reexport was to make cranelift version bumps easier since it's
less versions to change, but nowadays we have a script to do that.
Otherwise this encourages crates to use whatever they want from
`cranelift-entity` since we'll always depend on the whole crate.
It's expected that the `cranelift-entity` crate will continue to be a
lean crate in dependencies and suitable for use at both runtime and
compile time. Consequently there's no need to avoid its usage in
Wasmtime at runtime, since "remove Cranelift at compile time" is
primarily about the `cranelift-codegen` crate.
* Remove most uses of `cranelift-codegen` in `wasmtime-environ`
There's only one final use remaining, which is the reexport of
`TrapCode`, which will get handled later.
* Limit the glob-reexport of `cranelift_wasm`
This commit removes the glob reexport of `cranelift-wasm` from the
`wasmtime-environ` crate. This is intended to explicitly define what
we're reexporting and is a transitionary step to curtail the amount of
dependencies taken on `cranelift-wasm` throughout the codebase. For
example some functions used by debuginfo mapping are better imported
directly from the crate since they're Cranelift-specific. Note that
this is intended to be a temporary state affairs, soon this reexport
will be gone entirely.
Additionally this commit reduces imports from `cranelift_wasm` and also
primarily imports from `crate::wasm` within `wasmtime-environ` to get a
better sense of what's imported from where and what will need to be
shared.
* Extract types from cranelift-wasm to cranelift-wasm-types
This commit creates a new crate called `cranelift-wasm-types` and
extracts type definitions from the `cranelift-wasm` crate into this new
crate. The purpose of this crate is to be a shared definition of wasm
types that can be shared both by compilers (like Cranelift) as well as
wasm runtimes (e.g. Wasmtime). This new `cranelift-wasm-types` crate
doesn't depend on `cranelift-codegen` and is the final step in severing
the unconditional dependency from Wasmtime to `cranelift-codegen`.
The final refactoring in this commit is to then reexport this crate from
`wasmtime-environ`, delete the `cranelift-codegen` dependency, and then
update all `use` paths to point to these new types.
The main change of substance here is that the `TrapCode` enum is
mirrored from Cranelift into this `cranelift-wasm-types` crate. While
this unfortunately results in three definitions (one more which is
non-exhaustive in Wasmtime itself) it's hopefully not too onerous and
ideally something we can patch up in the future.
* Get lightbeam compiling
* Remove unnecessary dependency
* Fix compile with uffd
* Update publish script
* Fix more uffd tests
* Rename cranelift-wasm-types to wasmtime-types
This reflects the purpose a bit more where it's types specifically
intended for Wasmtime and its support.
* Fix publish script
This commit started off by deleting the `cranelift_codegen::settings`
reexport in the `wasmtime-environ` crate and then basically played
whack-a-mole until everything compiled again. The main result of this is
that the `wasmtime-*` family of crates have generally less of a
dependency on the `TargetIsa` trait and type from Cranelift. While the
dependency isn't entirely severed yet this is at least a significant
start.
This commit is intended to be largely refactorings, no functional
changes are intended here. The refactorings are:
* A `CompilerBuilder` trait has been added to `wasmtime_environ` which
server as an abstraction used to create compilers and configure them
in a uniform fashion. The `wasmtime::Config` type now uses this
instead of cranelift-specific settings. The `wasmtime-jit` crate
exports the ability to create a compiler builder from a
`CompilationStrategy`, which only works for Cranelift right now. In a
cranelift-less build of Wasmtime this is expected to return a trait
object that fails all requests to compile.
* The `Compiler` trait in the `wasmtime_environ` crate has been souped
up with a number of methods that Wasmtime and other crates needed.
* The `wasmtime-debug` crate is now moved entirely behind the
`wasmtime-cranelift` crate.
* The `wasmtime-cranelift` crate is now only depended on by the
`wasmtime-jit` crate.
* Wasm types in `cranelift-wasm` no longer contain their IR type,
instead they only contain the `WasmType`. This is required to get
everything to align correctly but will also be required in a future
refactoring where the types used by `cranelift-wasm` will be extracted
to a separate crate.
* I moved around a fair bit of code in `wasmtime-cranelift`.
* Some gdb-specific jit-specific code has moved from `wasmtime-debug` to
`wasmtime-jit`.
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
* Consolidate address calculations for atomics
This commit consolidates all calcuations of guest addresses into one
`prepare_addr` function. This notably remove the atomics-specifics paths
as well as the `prepare_load` function (now renamed to `prepare_addr`
and folded into `get_heap_addr`).
The goal of this commit is to simplify how addresses are managed in the
code generator for atomics to use all the shared infrastrucutre of other
loads/stores as well. This additionally fixes#3132 via the use of
`heap_addr` in clif for all operations.
I also added a number of tests for loads/stores with varying alignments.
Originally I was going to allow loads/stores to not be aligned since
that's what the current formal specification says, but the overview of
the threads proposal disagrees with the formal specification, so I
figured I'd leave it as-is but adding tests probably doesn't hurt.
Closes#3132
* Fix old backend
* Guarantee misalignment checks happen before out-of-bounds
This commit slims down the list of builtin intrinsics. It removes the
duplicated intrinsics for imported and locally defined items, instead
always using one intrinsic for both. This was previously inconsistently
applied where some intrinsics got two copies (one for imported one for
local) and other intrinsics got only one copy. This does add an extra
branch in intrinsics since they need to determine whether something is
local or not, but that's generally much lower cost than the intrinsics
themselves.
This also removes the `memory32_size` intrinsic, instead inlining the
codegen directly into the clif IR. This matches what the `table.size`
instruction does and removes the need for a few functions on a
`wasmtime_runtime::Instance`.
Implement Wasmtime's new API as designed by RFC 11. This is quite a large commit which has had lots of discussion externally, so for more information it's best to read the RFC thread and the PR thread.
This commit uses a two-phase lookup of stack map information from modules
rather than giving back raw pointers to stack maps.
First the runtime looks up information about a module from a pc value, which
returns an `Arc` it keeps a reference on while completing the stack map lookup.
Second it then queries the module information for the stack map from a pc
value, getting a reference to the stack map (which is now safe because of the
`Arc` held by the runtime).
This commit removes the stack map registry and instead uses the existing
information from the store's module registry to lookup stack maps.
A trait is now used to pass the lookup context to the runtime, implemented by
`Store` to do the lookup.
With this change, module registration in `Store` is now entirely limited to
inserting the module into the module registry.
* Consume fuel during function execution
This commit adds codegen infrastructure necessary to instrument wasm
code to consume fuel as it executes. Currently nothing is really done
with the fuel, but that'll come in later commits.
The focus of this commit is to implement the codegen infrastructure
necessary to consume fuel and account for fuel consumed correctly.
* Periodically check remaining fuel in wasm JIT code
This commit enables wasm code to periodically check to see if fuel has
run out. When fuel runs out an intrinsic is called which can do what it
needs to do in the result of fuel running out. For now a trap is thrown
to have at least some semantics in synchronous stores, but another
planned use for this feature is for asynchronous stores to periodically
yield back to the host based on fuel running out.
Checks for remaining fuel happen in the same locations as interrupt
checks, which is to say the start of the function as well as loop
headers.
* Improve codegen by caching `*const VMInterrupts`
The location of the shared interrupt value and fuel value is through a
double-indirection on the vmctx (load through the vmctx and then load
through that pointer). The second pointer in this chain, however, never
changes, so we can alter codegen to account for this and remove some
extraneous load instructions and hopefully reduce some register
pressure even maybe.
* Add tests fuel can abort infinite loops
* More fuzzing with fuel
Use fuel to time out modules in addition to time, using fuzz input to
figure out which.
* Update docs on trapping instructions
* Fix doc links
* Fix a fuzz test
* Change setting fuel to adding fuel
* Fix a doc link
* Squelch some rustdoc warnings
This commit adds initial (gated) support for the multi-memory wasm
proposal. This was actually quite easy since almost all of wasmtime
already expected multi-memory to be implemented one day. The only real
substantive change is the `memory.copy` intrinsic changes, which now
accounts for the source/destination memories possibly being different.
According to wasm's spec, nearest must do the following, for NaN inputs:
- when the input is a canonical NaN, return a canonical NaN;
- when the input is a non-canonical NaN, return an arithmetic NaN.
This patch adds checks when the exponent is all ones if the input was a
NaN, and will set the significand's most significant bit in that case.
It works both for canonical inputs (which already had the bit set) and
makes other NaN inputs canonical.
use approach with copysign for handling negative zero
format
refactor for better branch prediction
move copysign back to internal branch
format
fix
use abs instead branches
better comments
switch arms for better branch prediction
* wasmtime: Implement `global.{get,set}` for externref globals
We use libcalls to implement these -- unlike `table.{get,set}`, for which we
create inline JIT fast paths -- because no known toolchain actually uses
externref globals.
Part of #929
* wasmtime: Enable `{extern,func}ref` globals in the API
These instructions have fast, inline JIT paths for the common cases, and only
call out to host VM functions for the slow paths. This required some changes to
`cranelift-wasm`'s `FuncEnvironment`: instead of taking a `FuncCursor` to insert
an instruction sequence within the current basic block,
`FuncEnvironment::translate_table_{get,set}` now take a `&mut FunctionBuilder`
so that they can create whole new basic blocks. This is necessary for
implementing GC read/write barriers that involve branching (e.g. checking for
null, or whether a store buffer is at capacity).
Furthermore, it required that the `load`, `load_complex`, and `store`
instructions handle loading and storing through an `r{32,64}` rather than just
`i{32,64}` addresses. This involved making `r{32,64}` types acceptable
instantiations of the `iAddr` type variable, plus a few new instruction
encodings.
Part of #929
`funcref`s are implemented as `NonNull<VMCallerCheckedAnyfunc>`.
This should be more efficient than using a `VMExternRef` that points at a
`VMCallerCheckedAnyfunc` because it gets rid of an indirection, dynamic
allocation, and some reference counting.
Note that the null function reference is *NOT* a null pointer; it is a
`VMCallerCheckedAnyfunc` that has a null `func_ptr` member.
Part of #929
These libcalls are useful for 32-bit platforms.
On x86_32 in particular, commit 4ec16fa0 added support for legalizing
64-bit shifts through SIMD operations. However, that legalization
requires SIMD to be enabled and SSE 4.1 to be supported, which is not
acceptable as a hard requirement.
* Consolidate trap/frame information
This commit removes `TrapRegistry` in favor of consolidating this
information in the `FRAME_INFO` we already have in the `wasmtime` crate.
This allows us to keep information generally in one place and have one
canonical location for "map this PC to some original wasm stuff". The
intent for this is to next update with enough information to go from a
program counter to a position in the original wasm file.
* Expose module offset information in `FrameInfo`
This commit implements functionality for `FrameInfo`, the wasm stack
trace of a `Trap`, to return the module/function offset. This allows
knowing the precise wasm location of each stack frame, instead of only
the main trap itself. The intention here is to provide more visibility
into the wasm source when something traps, so you know precisely where
calls were and where traps were, in order to assist in debugging.
Eventually we might use this information for mapping back to native
source languages as well (given sufficient debug information).
This change makes a previously-optional artifact of compilation always
computed on the cranelift side of things. This `ModuleAddressMap` is
then propagated to the same store of information other frame information
is stored within. This also removes the need for passing a `SourceLoc`
with wasm traps or to wasm trap creation, since the backtrace's wasm
frames will be able to infer their own `SourceLoc` from the relevant
program counters.
* Enable the already-passing `bulk-memoryoperations/imports.wast` test
* Implement support for the `memory.init` instruction and passive data
This adds support for passive data segments and the `memory.init` instruction
from the bulk memory operations proposal. Passive data segments are stored on
the Wasm module and then `memory.init` instructions copy their contents into
memory.
* Implement the `data.drop` instruction
This allows wasm modules to deallocate passive data segments that it doesn't
need anymore. We keep track of which segments have not been dropped on an
`Instance` and when dropping them, remove the entry from the instance's hash
map. The module always needs all of the segments for new instantiations.
* Enable final bulk memory operations spec test
This requires special casing an expected error message for an `assert_trap`,
since the expected error message contains the index of an uninitialized table
element, but our trap implementation doesn't save that diagnostic information
and shepherd it out.
* rename PassiveElemIndex to ElemIndex and same for PassiveDataIndex (#1411)
* rename PassiveDataIndex to DataIndex
* rename PassiveElemIndex to ElemIndex
* Apply renamings to wasmtime as well
* Run rustfmt
Co-authored-by: csmoe <csmoe@msn.com>
This adds support for the `table.copy` instruction from the bulk memory
proposal. It also supports multiple tables, which were introduced by the
reference types proposal.
Part of #928
