Move the storage for jump tables off of FunctionStencil and onto DataFlowGraph. This change is in service of #5731, making it easier to access the jump table data in the context of helpers like inst_values.
* Cranelift: Introduce the `tail` calling convention
This is an unstable-ABI calling convention that we will eventually use to
support Wasm tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Introduce the `return_call` and `return_call_indirect` instructions
These will be used to implement tail calls for Wasm and any other language
targeting CLIF. The `return_call_indirect` instruction differs from the Wasm
instruction of the same name by taking a native address callee rather than a
Wasm function index.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Implement verification rules for `return_call[_indirect]`
They must:
* have the same return types between the caller and callee,
* have the same calling convention between caller and callee,
* and that calling convention must support tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* cargo fmt
---------
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
Add a conditional branch instruction with two targets: brif. This instruction will eventually replace brz and brnz, as it encompasses the behavior of both.
This PR also changes the InstructionData layout for instruction formats that hold BlockCall values, taking the same approach we use for Value arguments. This allows branch_destination to return a slice to the BlockCall values held in the instruction, rather than requiring that we pattern match on InstructionData to fetch the then/else blocks.
Function generation for fuzzing has been updated to generate uses of brif, and I've run the cranelift-fuzzgen target locally for hours without triggering any new failures.
Add a new type BlockCall that represents the pair of a block name with arguments to be passed to it. (The mnemonic here is that it looks a bit like a function call.) Rework the implementation of jump, brz, and brnz to use BlockCall instead of storing the block arguments as varargs in the instruction's ValueList.
To ensure that we're processing block arguments from BlockCall values in instructions, three new functions have been introduced on DataFlowGraph that both sets of arguments:
inst_values - returns an iterator that traverses values in the instruction and block arguments
map_inst_values - applies a function to each value in the instruction and block arguments
overwrite_inst_values - overwrite all values in an instruction and block arguments with values from the iterator
Co-authored-by: Jamey Sharp <jamey@minilop.net>
We have some operations defined on DataFlowGraph purely to work around borrow-checker issues with InstructionData and other data on DataFlowGraph. Part of the problem is that indexing the DFG directly hides the fact that we're only indexing the insts field of the DFG.
This PR makes the insts field of the DFG public, but wraps it in a newtype that only allows indexing. This means that the borrow checker is better able to tell when operations on memory held by the DFG won't conflict, which comes up frequently when mutating ValueLists held by InstructionData.
* cranelift-wasm: translate Wasm loads into lower-level CLIF operations
Rather than using `heap_{load,store,addr}`.
* cranelift: Remove the `heap_{addr,load,store}` instructions
These are now legalized in the `cranelift-wasm` frontend.
* cranelift: Remove the `ir::Heap` entity from CLIF
* Port basic memory operation tests to .wat filetests
* Remove test for verifying CLIF heaps
* Remove `heap_addr` from replace_branching_instructions_and_cfg_predecessors.clif test
* Remove `heap_addr` from readonly.clif test
* Remove `heap_addr` from `table_addr.clif` test
* Remove `heap_addr` from the simd-fvpromote_low.clif test
* Remove `heap_addr` from simd-fvdemote.clif test
* Remove `heap_addr` from the load-op-store.clif test
* Remove the CLIF heap runtest
* Remove `heap_addr` from the global_value.clif test
* Remove `heap_addr` from fpromote.clif runtests
* Remove `heap_addr` from fdemote.clif runtests
* Remove `heap_addr` from memory.clif parser test
* Remove `heap_addr` from reject_load_readonly.clif test
* Remove `heap_addr` from reject_load_notrap.clif test
* Remove `heap_addr` from load_readonly_notrap.clif test
* Remove `static-heap-without-guard-pages.clif` test
Will be subsumed when we port `make-heap-load-store-tests.sh` to generating
`.wat` tests.
* Remove `static-heap-with-guard-pages.clif` test
Will be subsumed when we port `make-heap-load-store-tests.sh` over to `.wat`
tests.
* Remove more heap tests
These will be subsumed by porting `make-heap-load-store-tests.sh` over to `.wat`
tests.
* Remove `heap_addr` from `simple-alias.clif` test
* Remove `heap_addr` from partial-redundancy.clif test
* Remove `heap_addr` from multiple-blocks.clif test
* Remove `heap_addr` from fence.clif test
* Remove `heap_addr` from extends.clif test
* Remove runtests that rely on heaps
Heaps are not a thing in CLIF or the interpreter anymore
* Add generated load/store `.wat` tests
* Enable memory-related wasm features in `.wat` tests
* Remove CLIF heap from fcmp-mem-bug.clif test
* Add a mode for compiling `.wat` all the way to assembly in filetests
* Also generate WAT to assembly tests in `make-load-store-tests.sh`
* cargo fmt
* Reinstate `f{de,pro}mote.clif` tests without the heap bits
* Remove undefined doc link
* Remove outdated SVG and dot file from docs
* Add docs about `None` returns for base address computation helpers
* Factor out `env.heap_access_spectre_mitigation()` to a local
* Expand docs for `FuncEnvironment::heaps` trait method
* Restore f{de,pro}mote+load clif runtests with stack memory
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
* Cranelift: Define `heap_load` and `heap_store` instructions
* Cranelift: Implement interpreter support for `heap_load` and `heap_store`
* Cranelift: Add a suite runtests for `heap_{load,store}`
There are so many knobs we can twist for heaps and I wanted to exhaustively test
all of them, so I wrote a script to generate the tests. I've checked in the
script in case we want to make any changes in the future, but I don't think it
is worth adding this to CI to check that scripts are up to date or anything like
that.
* Review feedback
* cranelift: Cleanup `fdemote`/`fpromote` tests
* cranelift: Fix `fdemote`/`fpromote` instruction docs
The verifier fails if the input and output types are the same
for these instructions
* cranelift: Fix `fdemote`/`fpromote` in the interpreter
* fuzzgen: Add `fdemote`/`fpromote`
* Cranelift: Make `heap_addr` return calculated `base + index + offset`
Rather than return just the `base + index`.
(Note: I've chosen to use the nomenclature "index" for the dynamic operand and
"offset" for the static immediate.)
This move the addition of the `offset` into `heap_addr`, instead of leaving it
for the subsequent memory operation, so that we can Spectre-guard the full
address, and not allow speculative execution to read the first 4GiB of memory.
Before this commit, we were effectively doing
load(spectre_guard(base + index) + offset)
Now we are effectively doing
load(spectre_guard(base + index + offset))
Finally, this also corrects `heap_addr`'s documented semantics to say that it
returns an address that will trap on access if `index + offset + access_size` is
out of bounds for the given heap, rather than saying that the `heap_addr` itself
will trap. This matches the implemented behavior for static memories, and after
https://github.com/bytecodealliance/wasmtime/pull/5190 lands (which is blocked
on this commit) will also match the implemented behavior for dynamic memories.
* Update heap_addr docs
* Factor out `offset + size` to a helper
This branch removes the trapif and trapff instructions, in favor of using an explicit comparison and trapnz. This moves us closer to removing iflags and fflags, but introduces the need to implement instructions like iadd_cout in the x64 and aarch64 backends.
- Allow bitcast for vectors with differing lane widths
- Remove raw_bitcast IR instruction
- Change all users of raw_bitcast to bitcast
- Implement support for no-op bitcast cases across backends
This implements the second step of the plan outlined here:
https://github.com/bytecodealliance/wasmtime/issues/4566#issuecomment-1234819394
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Leverage Cargo's workspace inheritance feature
This commit is an attempt to reduce the complexity of the Cargo
manifests in this repository with Cargo's workspace-inheritance feature
becoming stable in Rust 1.64.0. This feature allows specifying fields in
the root workspace `Cargo.toml` which are then reused throughout the
workspace. For example this PR shares definitions such as:
* All of the Wasmtime-family of crates now use `version.workspace =
true` to have a single location which defines the version number.
* All crates use `edition.workspace = true` to have one default edition
for the entire workspace.
* Common dependencies are listed in `[workspace.dependencies]` to avoid
typing the same version number in a lot of different places (e.g. the
`wasmparser = "0.89.0"` is now in just one spot.
Currently the workspace-inheritance feature doesn't allow having two
different versions to inherit, so all of the Cranelift-family of crates
still manually specify their version. The inter-crate dependencies,
however, are shared amongst the root workspace.
This feature can be seen as a method of "preprocessing" of sorts for
Cargo manifests. This will help us develop Wasmtime but shouldn't have
any actual impact on the published artifacts -- everything's dependency
lists are still the same.
* Fix wasi-crypto tests
We weren't using the "union" cargo feature for the smallvec crate, which
reduces the size of a SmallVec by one machine word. This feature
requires Rust 1.49 but we already require much newer versions.
When using Wasmtime to compile pulldown-cmark from Sightglass, this
saves a decent amount of memory allocations and writes. According to
`valgrind --tool=dhat`:
- 6.2MiB (3.69%) less memory allocated over the program's lifetime
- 0.5MiB (4.13%) less memory allocated at maximum heap size
- 5.5MiB (1.88%) fewer bytes written to
- 0.44% fewer instructions executed
Sightglass reports a statistically significant runtime improvement too:
compilation :: cycles :: benchmarks/pulldown-cmark/benchmark.wasm
Δ = 24379323.60 ± 20051394.04 (confidence = 99%)
shrink-abiarg-0406da67c.so is 1.01x to 1.13x faster than main-be690a468.so!
[227506364 355007998.78 423280514] main-be690a468.so
[227686018 330628675.18 406025344] shrink-abiarg-0406da67c.so
compilation :: cycles :: benchmarks/spidermonkey/benchmark.wasm
Δ = 360151622.56 ± 278294316.90 (confidence = 99%)
shrink-abiarg-0406da67c.so is 1.01x to 1.07x faster than main-be690a468.so!
[8709162212 8911001926.44 9535111576] main-be690a468.so
[5058015392 8550850303.88 9282148438] shrink-abiarg-0406da67c.so
compilation :: cycles :: benchmarks/bz2/benchmark.wasm
Δ = 6936570.28 ± 6897696.38 (confidence = 99%)
shrink-abiarg-0406da67c.so is 1.00x to 1.08x faster than main-be690a468.so!
[155810934 175260571.20 234737344] main-be690a468.so
[119128240 168324000.92 257451074] shrink-abiarg-0406da67c.so
Ported the existing implementations of the following opcodes for AArch64
to ISLE:
- `Trueif`
- `Trueff`
- `Trapif`
- `Trapff`
- `Select`
- `Selectif`
- `SelectifSpectreGuard`
Copyright (c) 2022 Arm Limited
* Vector bitcast support (AArch64 & Interpreter)
Implemented support for `bitcast` on vector values for AArch64 and the
interpreter.
Also corrected the verifier to ensure that the size, in bits, of the input and
output types match for a `bitcast`, per the docs.
Copyright (c) 2022 Arm Limited
* `I128` same-type bitcast support
Copyright (c) 2022 Arm Limited
* Directly return input for 64-bit GPR<=>GPR bitcast
Copyright (c) 2022 Arm Limited
* cranelift: Remove of/nof overflow flags from icmp
Neither Wasmtime nor cg-clif use these flags under any circumstances.
From discussion on #3060 I see it's long been unclear what purpose these
flags served.
Fixes#3060, fixes#4406, and fixes #4875... by deleting all the code
that could have been buggy.
This changes the cranelift-fuzzgen input format by removing some IntCC
options, so I've gone ahead and enabled I128 icmp tests at the same
time. Since only the of/nof cases were failing before, I expect these to
work.
* Restore trapif tests
It's still useful to validate that iadd_ifcout's iflags result can be
forwarded correctly to trapif, and for that purpose it doesn't really
matter what condition code is checked.
This commit replaces #4869 and represents the actual version bump that
should have happened had I remembered to bump the in-tree version of
Wasmtime to 1.0.0 prior to the branch-cut date. Alas!
* cranelift-codegen: Remove all uses of DataValue
This type is only used by the interpreter, cranelift-fuzzgen, and
filetests. I haven't found another convenient crate for those to all
depend on where this type can live instead, but this small refactor at
least makes it obvious that code generation does not in any way depend
on the implementation of this type.
* Make DataValue, not Ieee32/64, respect IEEE754
This fixes#4857 by partially reverting #4849.
It turns out that Ieee32 and Ieee64 need bitwise equality semantics so
they can be used as hash-table keys.
Moving the IEEE754 semantics up a layer to DataValue makes sense in
conjunction with #4855, where we introduced a DataValue::bitwise_eq
alternative implementation of equality for those cases where users of
DataValue still want the bitwise equality semantics.
* cranelift-interpreter: Use eq/ord from DataValue
This fixes#4828, again, now that the comparison operators on DataValue
have the right IEEE754 semantics.
* Add regression test from issue #4857
* cranelift: Add `fcmp` tests
Some of these are disabled on aarch64 due to not being implemented yet.
* cranelift: Implement float PartialEq for Ieee{32,64} (fixes#4828)
Previously `PartialEq` was auto derived. This means that it was implemented in terms of PartialEq in a u32.
This is not correct for floats because `NaN != NaN`.
PartialOrd was manually implemented in 6d50099816, but it seems like it was an oversight to leave PartialEq out until now.
The test suite depends on the previous behaviour so we adjust it to keep comparing bits instead of floats.
* cranelift: Disable `fcmp ord` tests on aarch64
* cranelift: Disable `fcmp ueq` tests on aarch64
* cranelift: Implement `bnot` in interpreter
* cranelift: Register all functions in test file for interpreter
* cranelift: Relax signature checking for bools and vectors
