* aarch64: constant generation cleanup
Add support for MOVZ and MOVN generation via ISLE.
Handle f32const, f64const, and nop instructions via ISLE.
No longer call Inst::gen_constant from lower.rs.
* riscv64: constant generation cleanup
Handle f32const, f64const, and nop instructions via ISLE.
* s390x: constant generation cleanup
Fix rule priorities for "imm" term.
Only handle 32-bit stack offsets; no longer use load_constant64.
* x64: constant generation cleanup
No longer call Inst::gen_constant from lower.rs or abi.rs.
* Refactor LowerBackend::lower to return InstOutput
No longer write to the per-insn output registers; instead, return
an InstOutput vector of temp registers holding the outputs.
This will allow calling LowerBackend::lower multiple times for
the same instruction, e.g. to rematerialize constants.
When emitting the primary copy of the instruction during lowering,
writing to the per-insn registers is now done in lower_clif_block.
As a result, the ISLE lower_common routine is no longer needed.
In addition, the InsnOutput type and all code related to it
can be removed as well.
* Refactor IsleContext to hold a LowerBackend reference
Remove the "triple", "flags", and "isa_flags" fields that are
copied from LowerBackend to each IsleContext, and instead just
hold a reference to LowerBackend in IsleContext.
This will allow calling LowerBackend::lower from within callbacks
in src/machinst/isle.rs, e.g. to rematerialize constants.
To avoid having to pass LowerBackend references through multiple
functions, eliminate the lower_insn_to_regs subroutines in those
targets that still have them, and just inline into the main
lower routine. This also eliminates lower_inst.rs on aarch64
and riscv64.
Replace all accesses to the removed IsleContext fields by going
through the LowerBackend reference.
* Remove MachInst::gen_constant
This addresses the problem described in issue
https://github.com/bytecodealliance/wasmtime/issues/4426
that targets currently have to duplicate code to emit
constants between the ISLE logic and the gen_constant
callback.
After the various cleanups in earlier patches in this series,
the only remaining user of get_constant is put_value_in_regs
in Lower. This can now be removed, and instead constant
rematerialization can be performed in the put_in_regs ISLE
callback by simply directly calling LowerBackend::lower
on the instruction defining the constant (using a different
output register).
Since the check for egraph mode is now no longer performed in
put_value_in_regs, the Lower::flags member becomes obsolete.
Care needs to be taken that other calls directly to the
Lower::put_value_in_regs routine now handle the fact that
no more rematerialization is performed. All such calls in
target code already historically handle constants themselves.
The remaining call site in the ISLE gen_call_common helper
can be redirected to the ISLE put_in_regs callback.
The existing target implementations of gen_constant are then
unused and can be removed. (In some target there may still
be further opportunities to remove duplication between ISLE
and some local Rust code - this can be left to future patches.)
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
* Cranelift: Define `heap_load` and `heap_store` instructions
* Cranelift: Implement interpreter support for `heap_load` and `heap_store`
* Cranelift: Add a suite runtests for `heap_{load,store}`
There are so many knobs we can twist for heaps and I wanted to exhaustively test
all of them, so I wrote a script to generate the tests. I've checked in the
script in case we want to make any changes in the future, but I don't think it
is worth adding this to CI to check that scripts are up to date or anything like
that.
* Review feedback
This branch removes the trapif and trapff instructions, in favor of using an explicit comparison and trapnz. This moves us closer to removing iflags and fflags, but introduces the need to implement instructions like iadd_cout in the x64 and aarch64 backends.
- Allow bitcast for vectors with differing lane widths
- Remove raw_bitcast IR instruction
- Change all users of raw_bitcast to bitcast
- Implement support for no-op bitcast cases across backends
This implements the second step of the plan outlined here:
https://github.com/bytecodealliance/wasmtime/issues/4566#issuecomment-1234819394
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
The trait had only one implementation: the `Lower` struct. It is easier to just
use that directly, and not introduce unnecessary layers of generics and
abstractions.
Once upon a time, there was hope that we would have other implementations of the
`LowerCtx` trait, that did things like lower CLIF to SMTLIB for
verification. However, this is not practical these days given the way that the
trait has evolved over time, and our verification efforts are focused on ISLE
now anyways, and we're actually making some progress on that front (much more
than anyone ever did on a second `LowerCtx` trait implementation!)
Implement the tls_value for s390 in the ELF general-dynamic mode.
Notable differences to the x86_64 implementation are:
- We use a __tls_get_offset libcall instead of __tls_get_addr.
- The current thread pointer (stored in a pair of access registers)
needs to be added to the result of __tls_get_offset.
- __tls_get_offset has a variant ABI that requires the address of
the GOT (global offset table) is passed in %r12.
This means we need a new libcall entries for __tls_get_offset.
In addition, we also need a way to access _GLOBAL_OFFSET_TABLE_.
The latter is a "magic" symbol with a well-known name defined
by the ABI and recognized by the linker. This patch introduces
a new ExternalName::KnownSymbol variant to support such names
(originally due to @afonso360).
We also need to emit a relocation on a symbol placed in a
constant pool, as well as an extra relocation on the call
to __tls_get_offset required for TLS linker optimization.
Needed by the cg_clif frontend.
This adds full i128 support to the s390x target, including new filetests
and enabling the existing i128 runtest on s390x.
The ABI requires that i128 is passed and returned via implicit pointer,
but the front end still generates direct i128 types in call. This means
we have to implement ABI support to implicitly convert i128 types to
pointers when passing arguments.
To do so, we add a new variant ABIArg::ImplicitArg. This acts like
StructArg, except that the value type is the actual target type,
not a pointer type. The required conversions have to be inserted
in the prologue and at function call sites.
Note that when dereferencing the implicit pointer in the prologue,
we may require a temp register: the pointer may be passed on the
stack so it needs to be loaded first, but the value register may
be in the wrong class for pointer values. In this case, we use
the "stack limit" register, which should be available at this
point in the prologue.
For return values, we use a mechanism similar to the one used for
supporting multiple return values in the Wasmtime ABI. The only
difference is that the hidden pointer to the return buffer must
be the *first*, not last, argument in this case.
(This implements the second half of issue #4565.)
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
This adds full support for all Cranelift SIMD instructions
to the s390x target. Everything is matched fully via ISLE.
In addition to adding support for many new instructions,
and the lower.isle code to match all SIMD IR patterns,
this patch also adds ABI support for vector types.
In particular, we now need to handle the fact that
vector registers 8 .. 15 are partially callee-saved,
i.e. the high parts of those registers (which correspond
to the old floating-poing registers) are callee-saved,
but the low parts are not. This is the exact same situation
that we already have on AArch64, and so this patch uses the
same solution (the is_included_in_clobbers callback).
The bulk of the changes are platform-specific, but there are
a few exceptions:
- Added ISLE extractors for the Immediate and Constant types,
to enable matching the vconst and swizzle instructions.
- Added a missing accessor for call_conv to ABISig.
- Fixed endian conversion for vector types in data_value.rs
to enable their use in runtests on the big-endian platforms.
- Enabled (nearly) all SIMD runtests on s390x. [ Two test cases
remain disabled due to vector shift count semantics, see below. ]
- Enabled all Wasmtime SIMD tests on s390x.
There are three minor issues, called out via FIXMEs below,
which should be addressed in the future, but should not be
blockers to getting this patch merged. I've opened the
following issues to track them:
- Vector shift count semantics
https://github.com/bytecodealliance/wasmtime/issues/4424
- is_included_in_clobbers vs. link register
https://github.com/bytecodealliance/wasmtime/issues/4425
- gen_constant callback
https://github.com/bytecodealliance/wasmtime/issues/4426
All tests, including all newly enabled SIMD tests, pass
on both z14 and z15 architectures.
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
Now that lowering is fully done in ISLE, clean up some code remnants
in lower.rs. In particular, move code to lower/isle.rs where
possible, and inline lower_insn_to_regs into its caller and simplify.
This adds infrastructure to allow implementing call and return
instructions in ISLE, and migrates the s390x back-end.
To implement ABI details, this patch creates public accessors
for `ABISig` and makes them accessible in ISLE. All actual
code generation is then done in ISLE rules, following the
information provided by that signature.
[ Note that the s390x back end never requires multiple slots for
a single argument - the infrastructure to handle this should
already be present, however. ]
To implement loops in ISLE rules, this patch uses regular tail
recursion, employing a `Range` data structure holding a range
of integers to be looped over.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
This change removes all variants of `load*_complex` and `store*_complex`
from Cranelift; this is a breaking change to the instructions exposed by
CLIF. The complete list of instructions removed is: `load_complex`,
`store_complex`, `uload8_complex`, `sload8_complex`, `istore8_complex`,
`sload8_complex`, `uload16_complex`, `sload16_complex`,
`istore16_complex`, `uload32_complex`, `sload32_complex`,
`istore32_complex`, `uload8x8_complex`, `sload8x8_complex`,
`sload16x4_complex`, `uload16x4_complex`, `uload32x2_complex`,
`sload32x2_complex`.
The rationale for this removal is that the Cranelift backend now has the
ability to pattern-match multiple upstream additions in order to
calculate the address to access. Previously, this was not possible so
the `*_complex` instructions were needed. Over time, these instructions
have fallen out of use in this repository, making the additional
overhead of maintaining them a chore.
In order to migrate branches to ISLE, we define a second entry
point `lower_branch` which gets the list of branch targets as
additional argument.
This requires a small change to `lower_common`: the `isle_lower`
callback argument is changed from a function pointer to a closure.
This allows passing the extra argument via a closure.
Traps make use of the recently added facility to emit safepoints
from ISLE, but are otherwise straightforward.
The BranchTarget abstraction is no longer needed, since all branches are
being emitted using a MachLabel target. Remove BranchTarget and simply
use MachLabel everywhere a branch target is required. (This brings the
s390x back-end in line with what x64 does as well.)
In addition, simplify jumptable emission by moving all instructions
that do not depend on the internal label (i.e. the conditional branch
to the default label, as well as the scaling the index register) out of
the combined JTSequence instruction.
This refactoring will make moving branch generation to ISLE easier.
This adds ISLE support for the s390x back-end and moves lowering
of most instructions to ISLE. The only instructions still remaining
are calls, returns, traps, and branches, most of which will need
additional support in common code.
Generated code is not intended to be (significantly) different
than before; any additional optimizations now made easier to
implement due to the ISLE layer can be added in follow-on patches.
There were a few differences in some filetests, but those are all
just simple register allocation changes (and all to the better!).
In preparing the back-end to move to ISLE, I detected a
number of codegen bugs in the existing code, which are
fixed here:
- Fix internal compiler error with uload16/icmp corner case.
- Fix broken Cls lowering.
- Correctly mask shift count for i8/i16 shifts.
In addition, I made several changes to operand encodings
in various MInst patterns. These should not have any
functional effect, but will make the ISLE migration easier:
- Encode floating-point constants as u32/u64 in MInst patterns.
- Encode shift amounts as u8 and Reg in ShiftOp pattern.
- Use MemArg in LoadMultiple64 and StoreMultiple64 patterns.
This opcode was removed as part of the old-backend cleanup in #3446.
While this opcode will definitely go away eventually, it is
unfortunately still used today in Lucet (as we just discovered while
working to upgrade Lucet's pinned Cranelift version). Lucet is
deprecated and slated to eventually be completely sunset in favor of
Wasmtime; but until that happens, we need to keep this opcode.
This also paves the way for unifying TargetIsa and MachBackend, since now they map one to one. In theory the two traits could be merged, which would be nice to limit the number of total concepts. Also they have quite different responsibilities, so it might be fine to keep them separate.
Interestingly, this PR started as removing RegInfo from the TargetIsa trait since the adapter returned a dummy value there. From the fallout, noticed that all Display implementations didn't needed an ISA anymore (since these were only used to render ISA specific registers). Also the whole family of RegInfo / ValueLoc / RegUnit was exclusively used for the old backend, and these could be removed. Notably, some IR instructions needed to be removed, because they were using RegUnit too: this was the oddball of regfill / regmove / regspill / copy_special, which were IR instructions inserted by the old regalloc. Fare thee well!
* Support full set of ADD LOGICAL / SUBTRACT LOGICAL instructions
* Full implementation of IaddIfcout lowering
* Enable most memory64 tests (except simd and threads)
- Add relocation handling needed after PR #3275
- Fix incorrect handling of signed constants detected by PR #3056 test
- Fix LabelUse max pos/neg ranges; fix overflow in buffers.rs
- Disable fuzzing tests that require pre-built v8 binaries
- Disable cranelift test that depends on i128
- Temporarily disable memory64 tests
Also, reorganize the AArch64-specific VCode instructions for unary
narrowing and widening vector operations, so that they are more
straightforward to use.
Copyright (c) 2021, Arm Limited.
This adds enough support for the IaddIfcout opcode to make the
code emitted by dynamic_addr work on s390x.
Note: On s390x, the condition code mask that has to be used to
implement unsigned_add_overflow_condition does not match any of
the masks for the "normal" condition codes, so this design is
not really a good match for s390x ...
* Add support for processor features (including auto-detection).
* Move base architecture set requirement back to z14.
* Add z15 feature sets and re-enable z15-specific code generation
when required features are available.
This adds full back-end support for the Fence, AtomicLoad
and AtomicStore operations, and partial support for the
AtomicCas and AtomicRmw operations.
The missing pieces include sub-word operations, operations
on little-endian memory requiring byte-swapping, and some
of the subtypes of AtomicRmw -- everything that cannot be
implemented without a compare-and-swap loop. This will be
done in a follow-up patch.
This patch already suffices to make the test suite green
again after a recent change that now requires atomic
operations when accessing the heap.
* Add support for x64 packed promote low
* Add support for x64 packed floating point demote
* Update vector promote low and demote by adding constraints
Also does some renaming and minor refactoring
This adds support for the IBM z/Architecture (s390x-ibm-linux).
The status of the s390x backend in its current form is:
- Wasmtime is fully functional and passes all tests on s390x.
- All back-end features supported, with the exception of SIMD.
- There is still a lot of potential for performance improvements.
- Currently the only supported processor type is z15.
