* Remove unnecessary into_iter/map
Forgotten from a previous refactoring, this variable was already of the
right type!
* Move `wasmtime_jit::Compiler` into `wasmtime`
This `Compiler` struct is mostly a historical artifact at this point and
wasn't necessarily pulling much weight any more. This organization also
doesn't lend itself super well to compiling out `cranelift` when the
`Compiler` here is used for both parallel iteration configuration
settings as well as compilation.
The movement into `wasmtime` is relatively small, with
`Module::build_artifacts` being the main function added here which is a
merging of the previous functions removed from the `wasmtime-jit` crate.
* Add a `cranelift` compile-time feature to `wasmtime`
This commit concludes the saga of refactoring Wasmtime and making
Cranelift an optional dependency by adding a new Cargo feature to the
`wasmtime` crate called `cranelift`, which is enabled by default.
This feature is implemented by having a new cfg for `wasmtime` itself,
`cfg(compiler)`, which is used wherever compilation is necessary. This
bubbles up to disable APIs such as `Module::new`, `Func::new`,
`Engine::precompile_module`, and a number of `Config` methods affecting
compiler configuration. Checks are added to CI that when built in this
mode Wasmtime continues to successfully build. It's hoped that although
this is effectively "sprinkle `#[cfg]` until things compile" this won't
be too too bad to maintain over time since it's also an use case we're
interested in supporting.
With `cranelift` disabled the only way to create a `Module` is with the
`Module::deserialize` method, which requires some form of precompiled
artifact.
Two consequences of this change are:
* `Module::serialize` is also disabled in this mode. The reason for this
is that serialized modules contain ISA/shared flags encoded in them
which were used to produce the compiled code. There's no storage for
this if compilation is disabled. This could probably be re-enabled in
the future if necessary, but it may not end up being all that necessary.
* Deserialized modules are not checked to ensure that their ISA/shared
flags are compatible with the host CPU. This is actually already the
case, though, with normal modules. We'll likely want to fix this in
the future using a shared implementation for both these locations.
Documentation should be updated to indicate that `cranelift` can be
disabled, although it's not really the most prominent documentation
because this is expected to be a somewhat niche use case (albeit
important, just not too common).
* Always enable cranelift for the C API
* Fix doc example builds
* Fix check tests on GitHub Actions
* Bump the wasm-tools crates
Pulls in some updates here and there, mostly for updating crates to the
latest version to prepare for later memory64 work.
* Update lightbeam
* Start a high-level architecture document for Wasmtime
This commit cleands up some existing documentation by removing a number
of "noop README files" and starting a high-level overview of the
architecture of Wasmtime. I've placed this documentation under the
contributing section of the book since it seems most useful for possible
contributors.
I've surely left some things out in this pass, and am happy to add more!
* Review comments
* More rewording
* typos
* Update wasm-tools crates
This brings in recent updates, notably including more improvements to
wasm-smith which will hopefully help exercise non-trapping wasm more.
* Fix some wat
* Update wasm-tools crates
* Update Wasm SIMD spec tests
* Invert 'experimental_x64_should_panic' logic
By doing this, it is easier to see which spec tests currently panic. The new tests correspond to recently-added instructions.
* Fix: ignore new spec tests for all backends
This commit goes through the dependencies that wasmtime has and updates
versions where possible. This notably brings in a wasmparser/wast update
which has some simd spec changes with new instructions. Otherwise most
of these are just routine updates.
This commit updates the various tooling used by wasmtime which has new
updates to the module linking proposal. This is done primarily to sync
with WebAssembly/module-linking#26. The main change implemented here is
that wasmtime now supports creating instances from a set of values, nott
just from instantiating a module. Additionally subtyping handling of
modules with respect to imports is now properly handled by desugaring
two-level imports to imports of instances.
A number of small refactorings are included here as well, but most of
them are in accordance with the changes to `wasmparser` and the updated
binary format for module linking.
This commit updates all the wasm-tools crates that we use and enables
fuzzing of the module linking proposal in our various fuzz targets. This
also refactors some of the dummy value generation logic to not be
fallible and to always succeed, the thinking being that we don't want to
accidentally hide errors while fuzzing. Additionally instantiation is
only allowed to fail with a `Trap`, other failure reasons are unwrapped.
* Implement imported/exported modules/instances
This commit implements the final piece of the module linking proposal
which is to flesh out the support for importing/exporting instances and
modules. This ended up having a few changes:
* Two more `PrimaryMap` instances are now stored in an `Instance`. The value
for instances is `InstanceHandle` (pretty easy) and for modules it's
`Box<dyn Any>` (less easy).
* The custom host state for `InstanceHandle` for `wasmtime` is now
`Arc<TypeTables` to be able to fully reconstruct an instance's types
just from its instance.
* Type matching for imports now has been updated to take
instances/modules into account.
One of the main downsides of this implementation is that type matching
of imports is duplicated between wasmparser and wasmtime, leading to
posssible bugs especially in the subtelties of module linking. I'm not
sure how best to unify these two pieces of validation, however, and it
may be more trouble than it's worth.
cc #2094
* Update wat/wast/wasmparser
* Review comments
* Fix a bug in publish script to vendor the right witx
Currently there's two witx binaries in our repository given the two wasi
spec submodules, so this updates the publication script to vendor the
right one.
This patch implements, for aarch64, the following wasm SIMD extensions
i32x4.dot_i16x8_s instruction
https://github.com/WebAssembly/simd/pull/127
It also updates dependencies as follows, in order that the new instruction can
be parsed, decoded, etc:
wat to 1.0.27
wast to 26.0.1
wasmparser to 0.65.0
wasmprinter to 0.2.12
The changes are straightforward:
* new CLIF instruction `widening_pairwise_dot_product_s`
* translation from wasm into `widening_pairwise_dot_product_s`
* new AArch64 instructions `smull`, `smull2` (part of the `VecRRR` group)
* translation from `widening_pairwise_dot_product_s` to `smull ; smull2 ; addv`
There is no testcase in this commit, because that is a separate repo. The
implementation has been tested, nevertheless.
This commit extracts the two implementations of `Compiler` into two
separate crates, `wasmtime-cranelfit` and `wasmtime-lightbeam`. The
`wasmtime-jit` crate then depends on these two and instantiates them
appropriately. The goal here is to start reducing the weight of the
`wasmtime-environ` crate, which currently serves as a common set of
types between all `wasmtime-*` crates. Long-term I'd like to remove the
dependency on Cranelift from `wasmtime-environ`, but that's going to
take a lot more work.
In the meantime I figure it's a good way to get started by separating
out the lightbeam/cranelift function compilers from the
`wasmtime-environ` crate. We can continue to iterate on moving things
out in the future, too.
This commit is intended to update wasmparser to 0.59.0. This primarily
includes bytecodealliance/wasm-tools#40 which is a large update to how
parsing and validation works. The impact on Wasmtime is pretty small at
this time, but over time I'd like to refactor the internals here to lean
more heavily on that upstream wasmparser refactoring.
For now, though, the intention is to get on the train of wasmparser's
latest `main` branch to ensure we get bug fixes and such.
As part of this update a few other crates and such were updated. This is
primarily to handle the new encoding of `ref.is_null` where the type is
not part of the instruction encoding any more.
This somewhat cuts down on duplicate dependencies. `wast` is used in a much older version (`11.0.0`) by `witx`, and can be updated without issues there as well, but this at least gets us from 3 copies to 2.
The `wasmtime` crate currently lives in `crates/api` for historical
reasons, because we once called it `wasmtime-api` crate. This creates a
stumbling block for new contributors.
As discussed on Zulip, rename the directory to `crates/wasmtime`.
* Wasmtime 0.15.0 and Cranelift 0.62.0. (#1398)
* Bump more ad-hoc versions.
* Add build.rs to wasi-common's Cargo.toml.
* Update the env var name in more places.
* Remove a redundant echo.
* Bump Wasmtime to 0.14.0.
* Update the publish script for the wiggle crate wiggle.
* More fixes.
* Fix lightbeam depenency version.
* cargo update
* Cargo update wasi-tests too.
And add cargo update to the version-bump scripts.
* Enable jitdump profiling support by default
This the result of some of the investigation I was doing for #1017. I've
done a number of refactorings here which culminated in a number of
changes that all amount to what I think should result in jitdump support being
enabled by default:
* Pass in a list of finished functions instead of just a range to
ensure that we're emitting jit dump data for a specific module rather
than a whole `CodeMemory` which may have other modules.
* Define `ProfilingStrategy` in the `wasmtime` crate to have everything
locally-defined
* Add support to the C API to enable profiling
* Documentation added for profiling with jitdump to the book
* Split out supported/unsupported files in `jitdump.rs` to avoid having
lots of `#[cfg]`.
* Make dependencies optional that are only used for `jitdump`.
* Move initialization up-front to `JitDumpAgent::new()` instead of
deferring it to the first module.
* Pass around `Arc<dyn ProfilingAgent>` instead of
`Option<Arc<Mutex<Box<dyn ProfilingAgent>>>>`
The `jitdump` Cargo feature is now enabled by default which means that
our published binaries, C API artifacts, and crates will support
profiling at runtime by default. The support I don't think is fully
fleshed out and working but I think it's probably in a good enough spot
we can get users playing around with it!
* Cargo.lock: Update, to no longer use multiple versions of autocfg
* Update wasmtime-debug and wasmtime-profiling to current gimli 0.20.0
This also eliminates duplicate versions of gimli and arrayvec, and
eliminates the nodrop dependency entirely.
* Update wasmtime-profiling to goblin 0.1.3 and object 0.17.0
This also eliminates two duplicate versions of goblin, and duplicate
versions of proc-macro2, quote, syn, scroll_derive, and unicode-xid.
* Update wasmtime-profiling to current scroll 0.10.1
This eliminates duplicate versions of scroll.
* Update wasmtime-profiling to current target-lexicon 0.10.0
This eliminates duplicate versions of target-lexicon.
* Update wasmtime-interface-types to current walrus and wasm-webidl-bindings
This also eliminates the oldest of the three duplicate versions of
wasmparser.
* Update wasmtime-wast to current wast 8.0.0
This eliminates one of the duplicate versions of wast.
* Update to the latest spec_testsuite and dependencies.
Update to target-lexicon 0.10, cranelift 0.54, wast 0.6, faerie 0.14,
and the latest spec_testsuite.
For wast and cranelift-wasm, update the code for API changes.
* Factor out the code for matching f32, f64, and v128.
This takes the idea from #802 to split out `f32_matches`, `f64_matches`,
and `v128_matches` functions, which better factor out the matching
functionality between scalar and vector.
