* Refactor how relocs are stored and handled
* refactor CompiledModule::instantiate and link_module
* Refactor DWARF creation: split generation and serialization
* Separate DWARF data transform from instantiation
* rm LinkContext
These libcalls are useful for 32-bit platforms.
On x86_32 in particular, commit 4ec16fa0 added support for legalizing
64-bit shifts through SIMD operations. However, that legalization
requires SIMD to be enabled and SSE 4.1 to be supported, which is not
acceptable as a hard requirement.
* Moves CodeMemory, VMInterrupts and SignatureRegistry from Compiler
* CompiledModule holds CodeMemory and GdbJitImageRegistration
* Store keeps track of its JIT code
* Makes "jit_int.rs" stuff Send+Sync
* Adds the threads example.
* Implement interrupting wasm code, reimplement stack overflow
This commit is a relatively large change for wasmtime with two main
goals:
* Primarily this enables interrupting executing wasm code with a trap,
preventing infinite loops in wasm code. Note that resumption of the
wasm code is not a goal of this commit.
* Additionally this commit reimplements how we handle stack overflow to
ensure that host functions always have a reasonable amount of stack to
run on. This fixes an issue where we might longjmp out of a host
function, skipping destructors.
Lots of various odds and ends end up falling out in this commit once the
two goals above were implemented. The strategy for implementing this was
also lifted from Spidermonkey and existing functionality inside of
Cranelift. I've tried to write up thorough documentation of how this all
works in `crates/environ/src/cranelift.rs` where gnarly-ish bits are.
A brief summary of how this works is that each function and each loop
header now checks to see if they're interrupted. Interrupts and the
stack overflow check are actually folded into one now, where function
headers check to see if they've run out of stack and the sentinel value
used to indicate an interrupt, checked in loop headers, tricks functions
into thinking they're out of stack. An interrupt is basically just
writing a value to a location which is read by JIT code.
When interrupts are delivered and what triggers them has been left up to
embedders of the `wasmtime` crate. The `wasmtime::Store` type has a
method to acquire an `InterruptHandle`, where `InterruptHandle` is a
`Send` and `Sync` type which can travel to other threads (or perhaps
even a signal handler) to get notified from. It's intended that this
provides a good degree of flexibility when interrupting wasm code. Note
though that this does have a large caveat where interrupts don't work
when you're interrupting host code, so if you've got a host import
blocking for a long time an interrupt won't actually be received until
the wasm starts running again.
Some fallout included from this change is:
* Unix signal handlers are no longer registered with `SA_ONSTACK`.
Instead they run on the native stack the thread was already using.
This is possible since stack overflow isn't handled by hitting the
guard page, but rather it's explicitly checked for in wasm now. Native
stack overflow will continue to abort the process as usual.
* Unix sigaltstack management is now no longer necessary since we don't
use it any more.
* Windows no longer has any need to reset guard pages since we no longer
try to recover from faults on guard pages.
* On all targets probestack intrinsics are disabled since we use a
different mechanism for catching stack overflow.
* The C API has been updated with interrupts handles. An example has
also been added which shows off how to interrupt a module.
Closes#139Closes#860Closes#900
* Update comment about magical interrupt value
* Store stack limit as a global value, not a closure
* Run rustfmt
* Handle review comments
* Add a comment about SA_ONSTACK
* Use `usize` for type of `INTERRUPTED`
* Parse human-readable durations
* Bring back sigaltstack handling
Allows libstd to print out stack overflow on failure still.
* Add parsing and emission of stack limit-via-preamble
* Fix new example for new apis
* Fix host segfault test in release mode
* Fix new doc example
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This commit adds a few odds and ends required to build wasmtime on ARM64
with the new backend. In particular, it adds:
- Support for the `Arm64Call` relocation type.
- Support for fetching the trap PC when a signal is received.
- A hook for `SIGTRAP`, which is sent by the `brk` opcode (in contrast to
x86's `SIGILL`).
With the patch sequence up to and including this patch applied,
`wasmtime` can now compile and successfully execute code on arm64. Not
all tests pass yet, but basic Wasm/WASI tests work correctly.
* Handle select relocations while generating trampolines
Trampoline generation for all function signatures exposed a preexisting
bug in wasmtime where trampoline generation occasionally does have
relocations, but it's asserted that trampolines don't generate
relocations, causing a panic. The relocation is currently primarily the
probestack function which happens when functions might have a huge
number of parameters, but not so huge as to blow the wasmparser limit of
how many parameters are allowed.
This commit fixes the issue by handling relocations for trampolines in
the same manner as the rest of the code. Note that dynamically-generated
trampolines via the `Func` API still panic if they have too many
arguments and generate a relocation, but it seems like we can try to fix
that later if the need truly arises.
Closes#1322
* Log trampoline relocations
* Improve robustness of cache loading/storing
Today wasmtime incorrectly loads compiled compiled modules from the
global cache when toggling settings such as optimizations. For example
if you execute `wasmtime foo.wasm` that will cache globally an
unoptimized version of the wasm module. If you then execute `wasmtime -O
foo.wasm` it would then reload the unoptimized version from cache, not
realizing the compilation settings were different, and use that instead.
This can lead to very surprising behavior naturally!
This commit updates how the cache is managed in an attempt to make it
much more robust against these sorts of issues. This takes a leaf out of
rustc's playbook and models the cache with a function that looks like:
fn load<T: Hash>(
&self,
data: T,
compute: fn(T) -> CacheEntry,
) -> CacheEntry;
The goal here is that it guarantees that all the `data` necessary to
`compute` the result of the cache entry is hashable and stored into the
hash key entry. This was previously open-coded and manually managed
where items were hashed explicitly, but this construction guarantees
that everything reasonable `compute` could use to compile the module is
stored in `data`, which is itself hashable.
This refactoring then resulted in a few workarounds and a few fixes,
including the original issue:
* The `Module` type was split into `Module` and `ModuleLocal` where only
the latter is hashed. The previous hash function for a `Module` left
out items like the `start_func` and didn't hash items like the imports
of the module. Omitting the `start_func` was fine since compilation
didn't actually use it, but omitting imports seemed uncomfortable
because while compilation didn't use the import values it did use the
*number* of imports, which seems like it should then be put into the
cache key. The `ModuleLocal` type now derives `Hash` to guarantee that
all of its contents affect the hash key.
* The `ModuleTranslationState` from `cranelift-wasm` doesn't implement
`Hash` which means that we have a manual wrapper to work around that.
This will be fixed with an upstream implementation, since this state
affects the generated wasm code. Currently this is just a map of
signatures, which is present in `Module` anyway, so we should be good
for the time being.
* Hashing `dyn TargetIsa` was also added, where previously it was not
fully hashed. Previously only the target name was used as part of the
cache key, but crucially the flags of compilation were omitted (for
example the optimization flags). Unfortunately the trait object itself
is not hashable so we still have to manually write a wrapper to hash
it, but we likely want to add upstream some utilities to hash isa
objects into cranelift itself. For now though we can continue to add
hashed fields as necessary.
Overall the goal here was to use the compiler to expose what we're not
hashing, and then make sure we organize data and write the right code to
ensure everything is hashed, and nothing more.
* Update crates/environ/src/module.rs
Co-Authored-By: Peter Huene <peterhuene@protonmail.com>
* Fix lightbeam
* Fix compilation of tests
* Update the expected structure of the cache
* Revert "Update the expected structure of the cache"
This reverts commit 2b53fee426a4e411c313d8c1e424841ba304a9cd.
* Separate the cache dir a bit
* Add a test the cache is busted with opt levels
* rustfmt
Co-authored-by: Peter Huene <peterhuene@protonmail.com>
This commit shrinks the `RelocationTarget` enumeration to remove
intrinsic-related relocations since they are no longer used. Instead
these function calls are done indirectly via a table in the `VMContext`.
This means that all of this is essentially dead code!
* Move compilation into Module from Instance.
* Fix fuzzing
* Use wasmtime::Module in fuzzing crates
Instead of wasmtime_jit.
* Compile eagerly.
* Review fixes.
* Always use the saved name.
* Preserve the former behavior for fuzzing oracle
This commit fixes the `wasmtime::Instance` instantiation API when
imports have the same name but might be imported under different types.
This is handled in the API by listing imports as a list instead of as a
name map, but they were interpreted as a name map under the hood causing
collisions.
This commit now keeps track of the index used to define each import, and
the index is passed through in the `Resolver`. Existing implementaitons
of `Resolver` all ignore this, but the API now uses it exclusivley to
match up `Extern` definitions to imports.
* Migrate back to `std::` stylistically
This commit moves away from idioms such as `alloc::` and `core::` as
imports of standard data structures and types. Instead it migrates all
crates to uniformly use `std::` for importing standard data structures
and types. This also removes the `std` and `core` features from all
crates to and removes any conditional checking for `feature = "std"`
All of this support was previously added in #407 in an effort to make
wasmtime/cranelift "`no_std` compatible". Unfortunately though this
change comes at a cost:
* The usage of `alloc` and `core` isn't idiomatic. Especially trying to
dual between types like `HashMap` from `std` as well as from
`hashbrown` causes imports to be surprising in some cases.
* Unfortunately there was no CI check that crates were `no_std`, so none
of them actually were. Many crates still imported from `std` or
depended on crates that used `std`.
It's important to note, however, that **this does not mean that wasmtime
will not run in embedded environments**. The style of the code today and
idioms aren't ready in Rust to support this degree of multiplexing and
makes it somewhat difficult to keep up with the style of `wasmtime`.
Instead it's intended that embedded runtime support will be added as
necessary. Currently only `std` is necessary to build `wasmtime`, and
platforms that natively need to execute `wasmtime` will need to use a
Rust target that supports `std`. Note though that not all of `std` needs
to be supported, but instead much of it could be configured off to
return errors, and `wasmtime` would be configured to gracefully handle
errors.
The goal of this PR is to move `wasmtime` back to idiomatic usage of
features/`std`/imports/etc and help development in the short-term.
Long-term when platform concerns arise (if any) they can be addressed by
moving back to `no_std` crates (but fixing the issues mentioned above)
or ensuring that the target in Rust has `std` available.
* Start filling out platform support doc
