* Pin nightlies to previous night
Fixes some upstream breakage in rust-lang/rust which should get fixed
tomorrow.
* fix-0.65
Co-authored-by: Yury Delendik <ydelendik@mozilla.com>
* Moves CodeMemory, VMInterrupts and SignatureRegistry from Compiler
* CompiledModule holds CodeMemory and GdbJitImageRegistration
* Store keeps track of its JIT code
* Makes "jit_int.rs" stuff Send+Sync
* Adds the threads example.
This avoids the set uniqueness (hashing) test, reduces memory
churn when re-mapping virtual register onto real registers, and is
generally more memory-efficient.
* Minor code tidying.
* Document that `Linker::iter`'s iteration order is arbitrary.
* Add a few more tests for `wasmtime::Linker`.
* Refactor `Linker::compute_imports`.
- Extract the error message generation into a separate function.
- In the error message, sort the candidates.
* Fix a typo in a comment.
* Add `__rtti_base` to the list of allowed but deprecated exports.
* Don't print an Error message when a program exits normally.
* Update comments to reflect the current code.
* Also allow "table" as an exported table, which is used by AssemblyScript.
This ports all of the identity, no-op, simplification, and canonicalization
related optimizations over from being hand-coded to the `peepmatic` DSL. This
does not handle the branch-to-branch optimizations or most of the
divide-by-constant optimizations.
SmallVec<[Value; 1]>, not as a Vec<Value>. This isn't a useful change for any
non-developer use of Cranelift, but it does significantly reduce the amount of
allocation "noise" seen when tuning the new backend pipeline as driven by
clif-util reading .clif files. In one case the number of malloc calls
declined by about 20% with this change.
This resolves the work started in https://github.com/bytecodealliance/cranelift/pull/1231 and https://github.com/bytecodealliance/wasmtime/pull/1436. Cranelift filetests currently have the ability to run CLIF functions with a signature like `() -> b*` and check that the result is true under the `test run` directive. This PR adds the ability to call functions with arbitrary arguments and non-boolean returns and either print the result or check against a list of expected results:
- `run` commands look like `; run: %add(2, 2) == 4` or `; run: %add(2, 2) != 5` and verify that the executed CLIF function returns the expected value
- `print` commands look like `; print: %add(2, 2)` and print the result of the function to stdout
To make this work, this PR compiles a single Cranelift `Function` into a `CompiledFunction` using a `SingleFunctionCompiler`. Because we will not know the signature of the function until runtime, we use a `Trampoline` to place the values in the appropriate location for the calling convention; this should look a lot like what @alexcrichton is doing with `VMTrampoline` in wasmtime (see 3b7cb6ee64/crates/api/src/func.rs (L510-L526), 3b7cb6ee64/crates/jit/src/compiler.rs (L260)). To avoid re-compiling `Trampoline`s for the same function signatures, `Trampoline`s are cached in the `SingleFunctionCompiler`.
* Implement trap info in Lightbeam
* Start using wasm-reader instead of wasmparser for parsing operators
* Update to use wasm-reader, some reductions in allocation, support source location tracking for traps, start to support multi-value
The only thing that still needs to be supported for multi-value is stack returns, but we need to make it compatible with Cranelift.
* Error when running out of registers (although we'd hope it should be impossible) instead of panicking
* WIP: Update Lightbeam to work with latest Wasmtime
* WIP: Update Lightbeam to use current wasmtime
* WIP: Migrate to new system for builtin functions
* WIP: Update Lightbeam to work with latest Wasmtime
* Remove multi_mut
* Format
* Fix some bugs around arguments, add debuginfo offset tracking
* Complete integration with new Wasmtime
* Remove commented code
* Fix formatting
* Fix warnings, remove unused dependencies
* Fix `iter` if there are too many elements, fix compilation for latest wasmtime
* Fix float arguments on stack
* Remove wasm-reader and trap info work
* Allocate stack space _before_ passing arguments, fail if we can't zero a xmm reg
* Fix stack argument offset calculation
* Fix stack arguments in Lightbeam
* Re-add WASI because it somehow got removed during rebase
* Workaround for apparent `type_alias_impl_trait`-related bug in rustdoc
* Fix breakages caused by rebase, remove module offset info as it is unrelated to wasmtime integration PR and was broken by rebase
* Add TODO comment explaining `lightbeam::ModuleContext` trait
This PR updates Cranelift to use the new version of regalloc.rs
(bytecodealliance/regalloc.rs#55) that provides dense vreg->rreg maps to
the `map_reg()` function for each instruction, rather than the earlier
hashmap-based approach.
In one test (regex-rs.wasm), this PR results in a 15% reduction in
memory allocations (1245MB -> 1060MB) as measured by DHAT on `clif-util
wasm` runs.
This change adds SourceLoc information per instruction in a `VCode<Inst>`
container, and keeps this information up-to-date across register allocation
and branch reordering. The information is initially collected during
instruction lowering, eventually collected on the MachSection, and finally
provided to the environment that wraps the codegen crate for wasmtime.
* wiggle-generate: paramaterize library on module path to runtime
This change makes no functional difference to users who only use the
wiggle crate.
Add a parameter to the `Names` constructor that determines the module
that runtime components (e.g. GuestPtr, GuestError etc) of wiggle come
from. For `wiggle` users this is just `quote!(wiggle)`, but other
libraries which consume wiggle-generate may wrap and re-export wiggle
under some other path, and not want their consumers to have to know
about the wiggle dependency, e.g. `quote!(my_crate::some_path::wiggle)`.
* wiggle-generate,macro: move more logic into macro
better for code reuse elsewhere
* Implement interrupting wasm code, reimplement stack overflow
This commit is a relatively large change for wasmtime with two main
goals:
* Primarily this enables interrupting executing wasm code with a trap,
preventing infinite loops in wasm code. Note that resumption of the
wasm code is not a goal of this commit.
* Additionally this commit reimplements how we handle stack overflow to
ensure that host functions always have a reasonable amount of stack to
run on. This fixes an issue where we might longjmp out of a host
function, skipping destructors.
Lots of various odds and ends end up falling out in this commit once the
two goals above were implemented. The strategy for implementing this was
also lifted from Spidermonkey and existing functionality inside of
Cranelift. I've tried to write up thorough documentation of how this all
works in `crates/environ/src/cranelift.rs` where gnarly-ish bits are.
A brief summary of how this works is that each function and each loop
header now checks to see if they're interrupted. Interrupts and the
stack overflow check are actually folded into one now, where function
headers check to see if they've run out of stack and the sentinel value
used to indicate an interrupt, checked in loop headers, tricks functions
into thinking they're out of stack. An interrupt is basically just
writing a value to a location which is read by JIT code.
When interrupts are delivered and what triggers them has been left up to
embedders of the `wasmtime` crate. The `wasmtime::Store` type has a
method to acquire an `InterruptHandle`, where `InterruptHandle` is a
`Send` and `Sync` type which can travel to other threads (or perhaps
even a signal handler) to get notified from. It's intended that this
provides a good degree of flexibility when interrupting wasm code. Note
though that this does have a large caveat where interrupts don't work
when you're interrupting host code, so if you've got a host import
blocking for a long time an interrupt won't actually be received until
the wasm starts running again.
Some fallout included from this change is:
* Unix signal handlers are no longer registered with `SA_ONSTACK`.
Instead they run on the native stack the thread was already using.
This is possible since stack overflow isn't handled by hitting the
guard page, but rather it's explicitly checked for in wasm now. Native
stack overflow will continue to abort the process as usual.
* Unix sigaltstack management is now no longer necessary since we don't
use it any more.
* Windows no longer has any need to reset guard pages since we no longer
try to recover from faults on guard pages.
* On all targets probestack intrinsics are disabled since we use a
different mechanism for catching stack overflow.
* The C API has been updated with interrupts handles. An example has
also been added which shows off how to interrupt a module.
Closes#139Closes#860Closes#900
* Update comment about magical interrupt value
* Store stack limit as a global value, not a closure
* Run rustfmt
* Handle review comments
* Add a comment about SA_ONSTACK
* Use `usize` for type of `INTERRUPTED`
* Parse human-readable durations
* Bring back sigaltstack handling
Allows libstd to print out stack overflow on failure still.
* Add parsing and emission of stack limit-via-preamble
* Fix new example for new apis
* Fix host segfault test in release mode
* Fix new doc example
This dependency was unfortunately causing rebuilds switching between
`cargo test` and `cargo build` since the `num` crate had different
features activated in testbuild mode. Instead of fixing this I went
ahead and just removed the small dependency on the `num` crate in the
`wasi-common` crate, opting for simple local definitions or using the
standard library's endian-switching methods.
This updates a few dependencies to avoid rebuilding extraneously when
possible on CI. While this doesn't fix everything it should at least be
part of the solution!
* Move most wasmtime tests into one test suite
This commit moves most wasmtime tests into a single test suite which
gets compiled into one executable instead of having lots of test
executables. The goal here is to reduce disk space on CI, and this
should be achieved by having fewer executables which means fewer copies
of `libwasmtime.rlib` linked across binaries on the system. More
importantly though this means that DWARF debug information should only
be in one executable rather than duplicated across many.
* Share more build caches
Globally set `RUSTFLAGS` to `-Dwarnings` instead of individually so all
build steps share the same value.
* Allow some dead code in cranelift-codegen
Prevents having to fix all warnings for all possible feature
combinations, only the main ones which come up.
* Update some debug file paths
This commit makes the following changes to unwind information generation in
Cranelift:
* Remove frame layout change implementation in favor of processing the prologue
and epilogue instructions when unwind information is requested. This also
means this work is no longer performed for Windows, which didn't utilize it.
It also helps simplify the prologue and epilogue generation code.
* Remove the unwind sink implementation that required each unwind information
to be represented in final form. For FDEs, this meant writing a
complete frame table per function, which wastes 20 bytes or so for each
function with duplicate CIEs. This also enables Cranelift users to collect the
unwind information and write it as a single frame table.
* For System V calling convention, the unwind information is no longer stored
in code memory (it's only a requirement for Windows ABI to do so). This allows
for more compact code memory for modules with a lot of functions.
* Deletes some duplicate code relating to frame table generation. Users can
now simply use gimli to create a frame table from each function's unwind
information.
Fixes#1181.
