This commit goes through the dependencies that wasmtime has and updates
versions where possible. This notably brings in a wasmparser/wast update
which has some simd spec changes with new instructions. Otherwise most
of these are just routine updates.
This commit updates the various tooling used by wasmtime which has new
updates to the module linking proposal. This is done primarily to sync
with WebAssembly/module-linking#26. The main change implemented here is
that wasmtime now supports creating instances from a set of values, nott
just from instantiating a module. Additionally subtyping handling of
modules with respect to imports is now properly handled by desugaring
two-level imports to imports of instances.
A number of small refactorings are included here as well, but most of
them are in accordance with the changes to `wasmparser` and the updated
binary format for module linking.
This commit updates all the wasm-tools crates that we use and enables
fuzzing of the module linking proposal in our various fuzz targets. This
also refactors some of the dummy value generation logic to not be
fallible and to always succeed, the thinking being that we don't want to
accidentally hide errors while fuzzing. Additionally instantiation is
only allowed to fail with a `Trap`, other failure reasons are unwrapped.
* Implement imported/exported modules/instances
This commit implements the final piece of the module linking proposal
which is to flesh out the support for importing/exporting instances and
modules. This ended up having a few changes:
* Two more `PrimaryMap` instances are now stored in an `Instance`. The value
for instances is `InstanceHandle` (pretty easy) and for modules it's
`Box<dyn Any>` (less easy).
* The custom host state for `InstanceHandle` for `wasmtime` is now
`Arc<TypeTables` to be able to fully reconstruct an instance's types
just from its instance.
* Type matching for imports now has been updated to take
instances/modules into account.
One of the main downsides of this implementation is that type matching
of imports is duplicated between wasmparser and wasmtime, leading to
posssible bugs especially in the subtelties of module linking. I'm not
sure how best to unify these two pieces of validation, however, and it
may be more trouble than it's worth.
cc #2094
* Update wat/wast/wasmparser
* Review comments
* Fix a bug in publish script to vendor the right witx
Currently there's two witx binaries in our repository given the two wasi
spec submodules, so this updates the publication script to vendor the
right one.
This commit is intended to do almost everything necessary for processing
the alias section of module linking. Most of this is internal
refactoring, the highlights being:
* Type contents are now stored separately from a `wasmtime_env::Module`.
Given that modules can freely alias types and have them used all over
the place, it seemed best to have one canonical location to type
storage which everywhere else points to (with indices). A new
`TypeTables` structure is produced during compilation which is shared
amongst all member modules in a wasm blob.
* Instantiation is heavily refactored to account for module linking. The
main gotcha here is that imports are now listed as "initializers". We
have a sort of pseudo-bytecode-interpreter which interprets the
initialization of a module. This is more complicated than just
matching imports at this point because in the module linking proposal
the module, alias, import, and instance sections may all be
interleaved. This means that imports aren't guaranteed to show up at
the beginning of the address space for modules/instances.
Otherwise most of the changes here largely fell out from these two
design points. Aliases are recorded as initializers in this scheme.
Copying around type information and/or just knowing type information
during compilation is also pretty easy since everything is just a
pointer into a `TypeTables` and we don't have to actually copy any types
themselves. Lots of various refactorings were necessary to accomodate
these changes.
Tests are hoped to cover a breadth of functionality here, but not
necessarily a depth. There's still one more piece of the module linking
proposal missing which is exporting instances/modules, which will come
in a future PR.
It's also worth nothing that there's one large TODO which isn't
implemented in this change that I plan on opening an issue for.
With module linking when a set of modules comes back from compilation
each modules has all the trampolines for the entire set of modules. This
is quite a lot of duplicate trampolines across module-linking modules.
We'll want to refactor this at some point to instead have only one set
of trampolines per set of module linking modules and have them shared
from there. I figured it was best to separate out this change, however,
since it's purely related to resource usage, and doesn't impact
non-module-linking modules at all.
cc #2094
* Provide filename/line number information in `Trap`
This commit extends the `Trap` type and `Store` to retain DWARF debug
information found in a wasm file unconditionally, if it's present. This
then enables us to print filenames and line numbers which point back to
actual source code when a trap backtrace is printed. Additionally the
`FrameInfo` type has been souped up to return filename/line number
information as well.
The implementation here is pretty simplistic currently. The meat of all
the work happens in `gimli` and `addr2line`, and otherwise wasmtime is
just schlepping around bytes of dwarf debuginfo here and there!
The general goal here is to assist with debugging when using wasmtime
because filenames and line numbers are generally orders of magnitude
better even when you already have a stack trace. Another nicety here is
that backtraces will display inlined frames (learned through debug
information), improving the experience in release mode as well.
An example of this is that with this file:
```rust
fn main() {
panic!("hello");
}
```
we get this stack trace:
```
$ rustc foo.rs --target wasm32-wasi -g
$ cargo run foo.wasm
Finished dev [unoptimized + debuginfo] target(s) in 0.16s
Running `target/debug/wasmtime foo.wasm`
thread 'main' panicked at 'hello', foo.rs:2:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Error: failed to run main module `foo.wasm`
Caused by:
0: failed to invoke command default
1: wasm trap: unreachable
wasm backtrace:
0: 0x6c1c - panic_abort::__rust_start_panic::abort::h2d60298621b1ccbf
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:77:17
- __rust_start_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:32:5
1: 0x68c7 - rust_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:626:9
2: 0x65a1 - std::panicking::rust_panic_with_hook::h2345fb0909b53e12
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:596:5
3: 0x1436 - std::panicking::begin_panic::{{closure}}::h106f151a6db8c8fb
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:506:9
4: 0xda8 - std::sys_common::backtrace::__rust_end_short_backtrace::he55aa13f22782798
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:153:18
5: 0x1324 - std::panicking::begin_panic::h1727e7d1d719c76f
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:505:12
6: 0xfde - foo::main::h2db1313a64510850
at /Users/acrichton/code/wasmtime/foo.rs:2:5
7: 0x11d5 - core::ops::function::FnOnce::call_once::h20ee1cc04aeff1fc
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:227:5
8: 0xddf - std::sys_common::backtrace::__rust_begin_short_backtrace::h054493e41e27e69c
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:137:18
9: 0x1d5a - std::rt::lang_start::{{closure}}::hd83784448d3fcb42
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:66:18
10: 0x69d8 - core::ops::function::impls::<impl core::ops::function::FnOnce<A> for &F>::call_once::h564d3dad35014917
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:259:13
- std::panicking::try::do_call::hdca4832ace5a8603
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:381:40
- std::panicking::try::ha8624a1a6854b456
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:345:19
- std::panic::catch_unwind::h71421f57cf2bc688
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panic.rs:382:14
- std::rt::lang_start_internal::h260050c92cd470af
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:51:25
11: 0x1d0c - std::rt::lang_start::h0b4bcf3c5e498224
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:65:5
12: 0xffc - <unknown>!__original_main
13: 0x393 - __muloti4
at /cargo/registry/src/github.com-1ecc6299db9ec823/compiler_builtins-0.1.35/src/macros.rs:269
```
This is relatively noisy by default but there's filenames and line
numbers! Additionally frame 10 can be seen to have lots of frames
inlined into it. All information is always available to the embedder but
we could try to handle the `__rust_begin_short_backtrace` and
`__rust_end_short_backtrace` markers to trim the backtrace by default as
well.
The only gotcha here is that it looks like `__muloti4` is out of place.
That's because the libc that Rust ships with doesn't have dwarf
information, although I'm not sure why we land in that function for
symbolizing it...
* Add a configuration switch for debuginfo
* Control debuginfo by default with `WASM_BACKTRACE_DETAILS`
* Try cpp_demangle on demangling as well
* Rename to WASMTIME_BACKTRACE_DETAILS
* this requires upgrading to wasmparser 0.67.0.
* There are no CLIF side changes because the CLIF `select` instruction is
polymorphic enough.
* on aarch64, there is unfortunately no conditional-move (csel) instruction on
vectors. This patch adds a synthetic instruction `VecCSel` which *does*
behave like that. At emit time, this is emitted as an if-then-else diamond
(4 insns).
* aarch64 implementation is otherwise straightforwards.
This commit is intended to be the first of many in implementing the
module linking proposal. At this time this builds on #2059 so it
shouldn't land yet. The goal of this commit is to compile bare-bones
modules which use module linking, e.g. those with nested modules.
My hope with module linking is that almost everything in wasmtime only
needs mild refactorings to handle it. The goal is that all per-module
structures are still per-module and at the top level there's just a
`Vec` containing a bunch of modules. That's implemented currently where
`wasmtime::Module` contains `Arc<[CompiledModule]>` and an index of
which one it's pointing to. This should enable
serialization/deserialization of any module in a nested modules
scenario, no matter how you got it.
Tons of features of the module linking proposal are missing from this
commit. For example instantiation flat out doesn't work, nor does
import/export of modules or instances. That'll be coming as future
commits, but the purpose here is to start laying groundwork in Wasmtime
for handling lots of modules in lots of places.
This will hopefully remove a small thorn in our side with periodic
nightly breakage due to nightly features changing. This commit moves
lightbeam to stable Rust, swapping out `staticvec` for `arrayvec` and
otherwise updating some dependencies (namely `dynasm`) to compile with
stable.
This then also updates CI appropriately to not use a pinned nightly and
instead us a floating `nightly` channel so we can head off any breakage
coming up ASAP.
I don't think this has happened in awhile but I've run a `cargo update`
as well as trimming some of the duplicate/older dependencies in
`Cargo.lock` by updating some of our immediate dependencies as well.
After compilation there's actually no need to hold onto the native
signature for a wasm function type, so this commit moves out the
`ir::Signature` value from a `Module` into a separate field that's
deallocated when compilation is finished. This simplifies the
`SignatureRegistry` because it only needs to track wasm functino types
and it also means less work is done for `Func::wrap`.
This patch implements, for aarch64, the following wasm SIMD extensions
i32x4.dot_i16x8_s instruction
https://github.com/WebAssembly/simd/pull/127
It also updates dependencies as follows, in order that the new instruction can
be parsed, decoded, etc:
wat to 1.0.27
wast to 26.0.1
wasmparser to 0.65.0
wasmprinter to 0.2.12
The changes are straightforward:
* new CLIF instruction `widening_pairwise_dot_product_s`
* translation from wasm into `widening_pairwise_dot_product_s`
* new AArch64 instructions `smull`, `smull2` (part of the `VecRRR` group)
* translation from `widening_pairwise_dot_product_s` to `smull ; smull2 ; addv`
There is no testcase in this commit, because that is a separate repo. The
implementation has been tested, nevertheless.
Turns out this wasn't needed anywhere! Additionally we can construct it
from `InstructionAddressMap` anyway. There's so many pieces of trap
information that it's best to keep these structures small as well.
* Validate modules while translating
This commit is a change to cranelift-wasm to validate each function body
as it is translated. Additionally top-level module translation functions
will perform module validation. This commit builds on changes in
wasmparser to perform module validation interwtwined with parsing and
translation. This will be necessary for future wasm features such as
module linking where the type behind a function index, for example, can
be far away in another module. Additionally this also brings a nice
benefit where parsing the binary only happens once (instead of having an
up-front serial validation step) and validation can happen in parallel
for each function.
Most of the changes in this commit are plumbing to make sure everything
lines up right. The major functional change here is that module
compilation should be faster by validating in parallel (or skipping
function validation entirely in the case of a cache hit). Otherwise from
a user-facing perspective nothing should be that different.
This commit does mean that cranelift's translation now inherently
validates the input wasm module. This means that the Spidermonkey
integration of cranelift-wasm will also be validating the function as
it's being translated with cranelift. The associated PR for wasmparser
(bytecodealliance/wasmparser#62) provides the necessary tools to create
a `FuncValidator` for Gecko, but this is something I'll want careful
review for before landing!
* Read function operators until EOF
This way we can let the validator take care of any issues with
mismatched `end` instructions and/or trailing operators/bytes.
This commit extracts the two implementations of `Compiler` into two
separate crates, `wasmtime-cranelfit` and `wasmtime-lightbeam`. The
`wasmtime-jit` crate then depends on these two and instantiates them
appropriately. The goal here is to start reducing the weight of the
`wasmtime-environ` crate, which currently serves as a common set of
types between all `wasmtime-*` crates. Long-term I'd like to remove the
dependency on Cranelift from `wasmtime-environ`, but that's going to
take a lot more work.
In the meantime I figure it's a good way to get started by separating
out the lightbeam/cranelift function compilers from the
`wasmtime-environ` crate. We can continue to iterate on moving things
out in the future, too.
This commit is intended to update wasmparser to 0.59.0. This primarily
includes bytecodealliance/wasm-tools#40 which is a large update to how
parsing and validation works. The impact on Wasmtime is pretty small at
this time, but over time I'd like to refactor the internals here to lean
more heavily on that upstream wasmparser refactoring.
For now, though, the intention is to get on the train of wasmparser's
latest `main` branch to ensure we get bug fixes and such.
As part of this update a few other crates and such were updated. This is
primarily to handle the new encoding of `ref.is_null` where the type is
not part of the instruction encoding any more.
* Implement trap info in Lightbeam
* Start using wasm-reader instead of wasmparser for parsing operators
* Update to use wasm-reader, some reductions in allocation, support source location tracking for traps, start to support multi-value
The only thing that still needs to be supported for multi-value is stack returns, but we need to make it compatible with Cranelift.
* Error when running out of registers (although we'd hope it should be impossible) instead of panicking
* WIP: Update Lightbeam to work with latest Wasmtime
* WIP: Update Lightbeam to use current wasmtime
* WIP: Migrate to new system for builtin functions
* WIP: Update Lightbeam to work with latest Wasmtime
* Remove multi_mut
* Format
* Fix some bugs around arguments, add debuginfo offset tracking
* Complete integration with new Wasmtime
* Remove commented code
* Fix formatting
* Fix warnings, remove unused dependencies
* Fix `iter` if there are too many elements, fix compilation for latest wasmtime
* Fix float arguments on stack
* Remove wasm-reader and trap info work
* Allocate stack space _before_ passing arguments, fail if we can't zero a xmm reg
* Fix stack argument offset calculation
* Fix stack arguments in Lightbeam
* Re-add WASI because it somehow got removed during rebase
* Workaround for apparent `type_alias_impl_trait`-related bug in rustdoc
* Fix breakages caused by rebase, remove module offset info as it is unrelated to wasmtime integration PR and was broken by rebase
* Add TODO comment explaining `lightbeam::ModuleContext` trait
* Wasmtime 0.15.0 and Cranelift 0.62.0. (#1398)
* Bump more ad-hoc versions.
* Add build.rs to wasi-common's Cargo.toml.
* Update the env var name in more places.
* Remove a redundant echo.
* Bump Wasmtime to 0.14.0.
* Update the publish script for the wiggle crate wiggle.
* More fixes.
* Fix lightbeam depenency version.
* cargo update
* Cargo update wasi-tests too.
And add cargo update to the version-bump scripts.
