* x64: Fill out more AVX instructions
This commit fills out more AVX instructions for SSE counterparts
currently used. Many of these instructions do not benefit from the
3-operand form that AVX uses but instead benefit from being able to use
`XmmMem` instead of `XmmMemAligned` which may be able to avoid some
extra temporary registers in some cases.
* Review comments
The relaxed-simd proposal for WebAssembly adds a fused-multiply-add
operation for `v128` types so I was poking around at Cranelift's
existing support for its `fma` instruction. I was also poking around at
the x86_64 ISA's offerings for the FMA operation and ended up with this
PR that improves the lowering of the `fma` instruction on the x64
backend in a number of ways:
* A libcall-based fallback is now provided for `f32x4` and `f64x2` types
in preparation for eventual support of the relaxed-simd proposal.
These encodings are horribly slow, but it's expected that if FMA
semantics must be guaranteed then it's the best that can be done
without the `fma` feature. Otherwise it'll be up to producers (e.g.
Wasmtime embedders) whether wasm-level FMA operations should be FMA or
multiply-then-add.
* In addition to the existing `vfmadd213*` instructions opcodes were
added for `vfmadd132*`. The `132` variant is selected based on which
argument can have a sinkable load.
* Any argument in the `fma` CLIF instruction can now have a
`sinkable_load` and it'll generate a single FMA instruction.
* All `vfnmadd*` opcodes were added as well. These are pattern-matched
where one of the arguments to the CLIF instruction is an `fneg`. I
opted to not add a new CLIF instruction here since it seemed like
pattern matching was easy enough but I'm also not intimately familiar
with the semantics here so if that's the preferred approach I can do
that too.
* x64: Enable load-coalescing for SSE/AVX instructions
This commit unlocks the ability to fold loads into operands of SSE and
AVX instructions. This is beneficial for both function size when it
happens in addition to being able to reduce register pressure.
Previously this was not done because most SSE instructions require
memory to be aligned. AVX instructions, however, do not have alignment
requirements.
The solution implemented here is one recommended by Chris which is to
add a new `XmmMemAligned` newtype wrapper around `XmmMem`. All SSE
instructions are now annotated as requiring an `XmmMemAligned` operand
except for a new new instruction styles used specifically for
instructions that don't require alignment (e.g. `movdqu`, `*sd`, and
`*ss` instructions). All existing instruction helpers continue to take
`XmmMem`, however. This way if an AVX lowering is chosen it can be used
as-is. If an SSE lowering is chosen, however, then an automatic
conversion from `XmmMem` to `XmmMemAligned` kicks in. This automatic
conversion only fails for unaligned addresses in which case a load
instruction is emitted and the operand becomes a temporary register
instead. A number of prior `Xmm` arguments have now been converted to
`XmmMem` as well.
One change from this commit is that loading an unaligned operand for an
SSE instruction previously would use the "correct type" of load, e.g.
`movups` for f32x4 or `movup` for f64x2, but now the loading happens in
a context without type information so the `movdqu` instruction is
generated. According to [this stack overflow question][question] it
looks like modern processors won't penalize this "wrong" choice of type
when the operand is then used for f32 or f64 oriented instructions.
Finally this commit improves some reuse of logic in the `put_in_*_mem*`
helper to share code with `sinkable_load` and avoid duplication. With
this in place some various ISLE rules have been updated as well.
In the tests it can be seen that AVX-instructions are now automatically
load-coalesced and use memory operands in a few cases.
[question]: https://stackoverflow.com/questions/40854819/is-there-any-situation-where-using-movdqu-and-movupd-is-better-than-movups
* Fix tests
* Fix move-and-extend to be unaligned
These don't have alignment requirements like other xmm instructions as
well. Additionally add some ISA tests to ensure that their output is
tested.
* Review comments
This is a follow-up to comments in #5795 to remove some cruft in the x64
instruction model to ensure that the shape of an `Inst` reflects what's
going to happen in regalloc and encoding. This accessor was used to
handle `round*`, `pextr*`, and `pshufb` instructions. The `round*` ones
had already moved to the appropriate `XmmUnary*` variant and `pshufb`
was additionally moved over to that variant as well.
The `pextr*` instructions got a new `Inst` variant and additionally had
their constructors slightly modified to no longer require the type as
input. The encoding for these instructions now automatically handles the
various type-related operands through a new `SseOpcode::Pextrq` operand
to represent 64-bit movements.
This commit refactors a bit about how sinkable loads are handled in the
x64 backend. The intention is to bring most handling around sinkable
loads up to date with the current state of the backend since things have
changed since these were originally introduced, namely automatic
conversions between types in ISLE. For example the `Value` type can be
automatically converted to `RegMem` to perform load sinking, but some
rules are still explicitly doing matching themselves.
Here I've removed explicit handling of immediates and sinkable loads
when they're the right-hand-side of an operation. These cases are
already handle by the "base case" when converting a `Value` to a
`RegMemImm`. Instead only rules explicitly for left-hand-side immediates
and sinkable loads remain. This helps cut down on the number of explicit
rules needed.
Additionally in the same manner that `Value` can be automatically
converted to `RegMem` I've added automatic conversions from
`SinkableLoad` to `RegMem` and the various other newtypes. This helps
cut down a bit on rule verbosity where `sink_load_*` is largely no
longer necessary.
* x64: Add most remaining AVX lowerings
This commit goes through `inst.isle` and adds a corresponding AVX
lowering for most SSE lowerings. I opted to skip instructions where the
SSE lowering didn't read/modify a register, such as `roundps`. I think
that AVX will benefit these instructions when there's load-merging since
AVX doesn't require alignment, but I've deferred that work to a future
PR.
Otherwise though in this PR I think all (or almost all) of the 3-operand
forms of AVX instructions are supported with their SSE counterparts.
This should ideally improve codegen slightly by removing register
pressure and the need for `movdqa` between registers. I've attempted to
ensure that there's at least one codegen test for all the new instructions.
As a side note, the recent capstone integration into `precise-output`
tests helped me catch a number of encoding bugs much earlier than
otherwise, so I've found that incredibly useful in tests!
* Move `vpinsr*` instructions to their own variant
Use true `XmmMem` and `GprMem` types in the instruction as well to get
more type-level safety for what goes where.
* Remove `Inst::produces_const` accessor
Instead of conditionally defining regalloc and various other operations
instead add dedicated `MInst` variants for operations which are intended
to produce a constant to have more clear interactions with regalloc and
printing and such.
* Fix tests
* Register traps in `MachBuffer` for load-folding ops
This adds a missing `add_trap` to encoding of VEX instructions with
memory operands to ensure that if they cause a segfault that there's
appropriate metadata for Wasmtime to understand that the instruction
could in fact trap. This fixes a fuzz test case found locally where v8
trapped and Wasmtime didn't catch the signal and crashed the fuzzer.
* x64: Add rudimentary support for some AVX instructions
I was poking around Spidermonkey's wasm backend and saw that the various
assembler functions used are all `v*`-prefixed which look like they're
intended for use with AVX instructions. I looked at Cranelift and it
currently doesn't have support for many AVX-based instructions, so I
figured I'd take a crack at it!
The support added here is a bit of a mishmash when viewed alone, but my
general goal was to take a single instruction from the SIMD proposal for
WebAssembly and migrate all of its component instructions to AVX. I, by
random chance, picked a pretty complicated instruction of `f32x4.min`.
This wasm instruction is implemented on x64 with 4 unique SSE
instructions and ended up being a pretty good candidate.
Further digging about AVX-vs-SSE shows that there should be two major
benefits to using AVX over SSE:
* Primarily AVX instructions largely use a three-operand form where two
input registers are operated with and an output register is also
specified. This is in contrast to SSE's predominant
one-register-is-input-but-also-output pattern. This should help free
up the register allocator a bit and additionally remove the need for
movement between registers.
* As #4767 notes the memory-based operations of VEX-encoded instructions
(aka AVX instructions) do not have strict alignment requirements which
means we would be able to sink loads and stores into individual
instructions instead of having separate instructions.
So I set out on my journey to implement the instructions used by
`f32x4.min`. The first few were fairly easy. The machinst backends are
already of the shape "take these inputs and compute the output" where
the x86 requirement of a register being both input and output is
postprocessed in. This means that the `inst.isle` creation helpers for
SSE instructions were already of the correct form to use AVX. I chose to
add new `rule` branches for the instruction creation helpers, for
example `x64_andnps`. The new `rule` conditionally only runs if AVX is
enabled and emits an AVX instruction instead of an SSE instruction for
achieving the same goal. This means that no lowerings of clif
instructions were modified, instead just new instructions are being
generated.
The VEX encoding was previously not heavily used in Cranelift. The only
current user are the FMA-style instructions that Cranelift has at this
time. These FMA instructions have one extra operand than `vandnps`, for
example, so I split the existing `XmmRmRVex` into a few more variants to
fit the shape of the instructions that needed generating for
`f32x4.min`. This was accompanied then with more AVX opcode definitions,
more emission support, etc.
Upon implementing all of this it turned out that the test suite was
failing on my machine due to the memory-operand encodings of VEX
instructions not being supported. I didn't explicitly add those in
myself but some preexisting RIP-relative addressing was leaking into the
new instructions with existing tests. I opted to go ahead and fill out
the memory addressing modes of VEX encoding to get the tests passing
again.
All-in-all this PR adds new instructions to the x64 backend for a number
of AVX instructions, updates 5 existing instruction producers to use AVX
instructions conditionally, implements VEX memory operands, and adds
some simple tests for the new output of `f32x4.min`. The existing
runtest for `f32x.min` caught a few intermediate bugs along the way and
I additionally added a plain `target x86_64` to that runtest to ensure
that it executes with and without AVX to test the various lowerings.
I'll also note that this, and future support, should be well-fuzzed
through Wasmtime's fuzzing which may explicitly disable AVX support
despite the machine having access to AVX, so non-AVX lowerings should be
well-tested into the future.
It's also worth mentioning that I am not an AVX or VEX or x64 expert.
Implementing the memory operand part for VEX was the hardest part of
this PR and while I think it should be good someone else should
definitely double-check me. Additionally I haven't added many
instructions to the x64 backend yet so I may have missed obvious places
to tests or such, so am happy to follow-up with anything to be more
thorough if necessary.
Finally I should note that this is just the tip of the iceberg when it
comes to AVX. My hope is to get some of the idioms sorted out to make it
easier for future PRs to add one-off instruction lowerings or such.
* Review feedback
This updates the signatures of the `xmm_rm_r` helper function and then
updates existing users and migrates other users to the helper now that
the type information is no longer required.
This change adds support for immediate to memory moves in x64 which
are needed by Winch for zeroing local slots.
This change follows the guideline in `isa/x64/inst/emit` and uses
other instructions (immediate to register moves) as a base for the
test cases.
The instruction encoding expectation was derived by assembling each
instruction and inspecting the assembly with `objdump`.
* cranelift-isle: Add "partial" flag for constructors
Instead of tying fallibility of constructors to whether they're either
internal or pure, this commit assumes all constructors are infallible
unless tagged otherwise with a "partial" flag.
Internal constructors without the "partial" flag are not allowed to use
constructors which have the "partial" flag on the right-hand side of any
rules, because they have no way to report last-minute match failures.
Multi-constructors should never be "partial"; they report match failures
with an empty iterator instead. In turn this means you can't use partial
constructors on the right-hand side of internal multi-constructor rules.
However, you can use the same constructors on the left-hand side with
`if` or `if-let` instead.
In many cases, ISLE can already trivially prove that an internal
constructor always returns `Some`. With this commit, those cases are
largely unchanged, except for removing all the `Option`s and `Some`s
from the generated code for those terms.
However, for internal non-partial constructors where ISLE could not
prove that, it now emits an `unreachable!` panic as the last-resort,
instead of returning `None` like it used to do. Among the existing
backends, here's how many constructors have these panic cases:
- x64: 14% (53/374)
- aarch64: 15% (41/277)
- riscv64: 23% (26/114)
- s390x: 47% (268/567)
It's often possible to rewrite rules so that ISLE can tell the panic can
never be hit. Just ensure that there's a lowest-priority rule which has
no constraints on the left-hand side.
But in many of these constructors, it's difficult to statically prove
the unhandled cases are unreachable because that's only down to
knowledge about how they're called or other preconditions.
So this commit does not try to enforce that all terms have a last-resort
fallback rule.
* Check term flags while translating expressions
Instead of doing it in a separate pass afterward.
This involved threading all the term flags (pure, multi, partial)
through the recursive `translate_expr` calls, so I extracted the flags
to a new struct so they can all be passed together.
* Validate multi-term usage
Now that I've threaded the flags through `translate_expr`, it's easy to
check this case too, so let's just do it.
* Extract `ReturnKind` to use in `ExternalSig`
There are only three legal states for the combination of `multi` and
`infallible`, so replace those fields of `ExternalSig` with a
three-state enum.
* Remove `Option` wrapper from multi-extractors too
If we'd had any external multi-constructors this would correct their
signatures as well.
* Update ISLE tests
* Tag prelude constructors as pure where appropriate
I believe the only reason these weren't marked `pure` before was because
that would have implied that they're also partial. Now that those two
states are specified separately we apply this flag more places.
* Fix my changes to aarch64 `lower_bmask` and `imm` terms
Avoid reusing output registers in make_i64x2_from_lanes by threading the output name instead, and using smart constructors for x64_pinsrd instead of constructing the instructions directly.
Avoid naming %rcx as written by the CoffTlsGetAddr pseudo-instruction in the x64 backend, and instead emit a fixed-def constraint for a fresh VReg and %rcx.
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
Resolve overlap in the ISLE prelude and the x64 inst module by introducing new types that allow better sharing of extractor resuls, or falling back on priorities.
* Port `icmp` to ISLE (AArch64)
Ported the existing implementation of `icmp` (and, by extension, the
`lower_icmp` function) to ISLE for AArch64.
Copyright (c) 2022 Arm Limited
* Allow 'producer chains', eliminating `Nop0`s
Copyright (c) 2022 Arm Limited
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
Using fallible extractors that produce no values for flag checks means
that it's not possible to pattern match cases where those flags are
false. This change reworks the existing flag-checking extractors to be
infallible, returning the flag's boolean value from the context instead.
This is a cherry-pick of a long-ago commit, 2d46637. The original
message reads:
> Now that `SyntheticAmode` can refer to constants, there is no longer a
> need for a separate instruction format--standard load instructions will
> work.
Since then, the transition to ISLE and the use of `XmmLoadConst` in many
more places makes this change a larger diff than the original. The basic
idea is the same, though: the extra indirection of `Inst::XMmLoadConst`
is removed and replaced by a direct use of `VCodeConstant` as a
`SyntheticAmode`. This has no effect on codegen, but the CLIF output is
now clearer in that the actual instruction is displayed (e.g., `movdqu`)
instead of a made-up instruction (`load_const`).
This slipped through the regalloc2 operand code update in #4811: the
CvtFloatToUintSeq pseudo-instruction actually clobbers its source. It
was marked as a "mod" operand in the original and I mistakenly
converted it to a "use" as I had not seen the actual clobber. The
instruction now takes an extra temp and makes a copy of `src` in the
appropriate place.
Fixes#4840.
Add a new pseudo-instruction, XmmUnaryRmRImm, to handle instructions like roundss that only use their first register argument for the instruction's result. This has the added benefit of allowing the isle wrappers for those instructions to take an XmmMem argument, allowing for more cases where loads may be merged.
* x64: clean up regalloc-related semantics on several instructions.
This PR removes all uses of "modify" operands on instructions in the x64
backend, and also removes all uses of "pinned vregs", or vregs that are
explicitly tied to particular physical registers. In place of both of
these mechanisms, which are legacies of the old regalloc design and
supported via compatibility code, the backend now uses operand
constraints. This is more flexible as it allows the regalloc to see the
liveranges and constraints without "reverse-engineering" move instructions.
Eventually, after removing all such uses (including in other backends
and by the ABI code), we can remove the compatibility code in regalloc2,
significantly simplifying its liverange-construction frontend and
thus allowing for higher confidence in correctness as well as possibly a
bit more compilation speed.
Curiously, there are a few extra move instructions now; they are likely
poor splitting decisions and I can try to chase these down later.
* Fix cranelift-codegen tests.
* Review feedback.
Ensure that constants generated for the memory case of XmmMem values are always 16 bytes, ensuring that we don't accidantally perform an unaligned load.
Fixes#4761
Lower extractlane, scalar_to_vector and splat in ISLE.
This PR also makes some changes to the SinkableLoad api
* change the return type of sink_load to RegMem as there are more functions available for dealing with RegMem
* add reg_mem_to_reg_mem_imm and register it as an automatic conversion
Lower `shuffle` and `swizzle` in ISLE.
This PR surfaced a bug with the lowering of `shuffle` when avx512vl and avx512vbmi are enabled: we use `vpermi2b` as the implementation, but panic if the immediate shuffle mask contains any out-of-bounds values. The behavior when the avx512 extensions are not present is that out-of-bounds values are turned into `0` in the result.
I've resolved this by detecting when the shuffle immediate has out-of-bounds indices in the avx512-enabled lowering, and generating an additional mask to zero out the lanes where those indices occur. This brings the avx512 case into line with the semantics of the `shuffle` op: 94bcbe8446/cranelift/codegen/meta/src/shared/instructions.rs (L1495-L1498)
* x64: Mask shift amounts for small types
* cranelift: Disable i128 shifts in fuzzer again
They are fixed. But we had a bunch of fuzzgen issues come in, and we don't want to accidentaly mark them as fixed
* cranelift: Avoid masking shifts for 32 and 64 bit cases
* cranelift: Add const shift tests and fix them
* cranelift: Remove const `rotl` cases
Now that `put_masked_in_imm8_gpr` works properly we can simplify rotl/rotr
Lower stack_addr, udiv, sdiv, urem, srem, umulhi, and smulhi in ISLE.
For udiv, sdiv, urem, and srem I opted to move the original lowering into an extern constructor, as the interactions with rax and rdx for the div instruction didn't seem meaningful to implement in ISLE. However, I'm happy to revisit this choice and move more of the embedding into ISLE.
The sse_cmp_op rule had cases that would produce SseOperand values that aren't legal to use with MInst.XmmRmR, and was only used in vector_all_ones when constructing an XmmRmR value. Additionally, vector_all_ones always called sse_cmp_op with the same type, so the other cases were redundant.
The solution in this PR is to remove sse_cmp_op entirely and inline a call to x64_pcmpeqd directly in vector_all_ones, and remove the unused argument from vector_all_ones.
* Add a test for iadd_pairwise with swiden input
* Implement iadd_pairwise for swiden_{low,high} input
* Add a test case for iadd_pairwise with uwiden input
* Implement iadd_pairwise with uwiden
