This will allow for support for `I128` values everywhere, and `I64`
values on 32-bit targets (e.g., ARM32 and x86-32). It does not alter the
machine backends to build such support; it just adds the framework for
the MachInst backends to *reason* about a `Value` residing in more than
one register.
When performing a function call, the platform ABI may require space
on the stack to hold outgoing arguments and/or return values.
Currently, this is supported via decrementing the stack pointer
before the call and incrementing it afterwards, using the
emit_stack_pre_adjust and emit_stack_post_adjust methods of
ABICaller. However, on some platforms it would be preferable
to just allocate enough space for any call done in the function
in the caller's prologue instead.
This patch adds support to allow back-ends to choose that method.
Instead of calling emit_stack_pre/post_adjust around a call, they
simply call a new accumulate_outgoing_args_size method of
ABICaller instead. This will pass on the required size to the
ABICallee structure of the calling function, which will accumulate
the maximum size required for all function calls.
That accumulated size is then passed to the gen_clobber_save
and gen_clobber_restore functions so they can include the size
in the stack allocation / deallocation that already happens in
the prologue / epilogue code.
This PR updates the AArch64 ABI implementation so that it (i) properly
respects that v8-v15 inclusive have callee-save lower halves, and
caller-save upper halves, by conservatively approximating (to full
registers) in the appropriate directions when generating prologue
caller-saves and when informing the regalloc of clobbered regs across
callsites.
In order to prevent saving all of these vector registers in the prologue
of every non-leaf function due to the above approximation, this also
makes use of a new regalloc.rs feature to exclude call instructions'
writes from the clobber set returned by register allocation. This is
safe whenever the caller and callee have the same ABI (because anything
the callee could clobber, the caller is allowed to clobber as well
without saving it in the prologue).
Fixes#2254.
As part of a Wasm JIT update, SpiderMonkey is changing its internal
WebAssembly function ABI. The new ABI's frame format includes "caller
TLS" and "callee TLS" slots. The details of where these come from are
not important; from Cranelift's point of view, the only relevant
requirement is that we have two on-stack args that are always present
(offsetting other on-stack args), and that we define special argument
purposes so that we can supply values for these slots.
Note that this adds a *new* ABI (a variant of the Baldrdash ABI) because
we do not want to tightly couple the landing of this PR to the landing
of the changes in SpiderMonkey; it's better if both the old and new
behavior remain available in Cranelift, so SpiderMonkey can continue to
vendor Cranelift even if it does not land (or backs out) the ABI change.
Furthermore, note that this needs to be a Cranelift-level change (i.e.
cannot be done purely from the translator environment implementation)
because the special TLS arguments must always go on the stack, which
would not otherwise happen with the usual argument-placement logic; and
there is no primitive to push a value directly in CLIF code (the notion
of a stack frame is a lower-level concept).
Previously, in #2128, we factored out a common "vanilla 64-bit ABI"
implementation from the AArch64 ABI code, with the idea that this should
be largely compatible with x64. This PR alters the new x64 backend to
make use of the shared infrastructure, removing the duplication that
existed previously. The generated code is nearly (not exactly) the same;
the only difference relates to how the clobber-save region is padded in
the prologue.
This also changes some register allocations in the aarch64 code because
call support in the shared ABI infra now passes a temp vreg in, rather
than requiring use of a fixed, non-allocable temp; tests have been
updated, and the runtime behavior is unchanged.
In the Baldrdash (SpiderMonkey) embedding, we must take care to
zero-extend all function arguments to callees in integer registers when
the types are narrower than 64 bits. This is because, unlike the native
SysV ABI, the Baldrdash ABI expects high bits to be cleared. Not doing
so leads to difficult-to-trace errors where high bits falsely tag an
int32 as e.g. an object pointer, leading to potential security issues.
This commit adds support for generating stackmaps at safepoints to the
new backend framework and to the AArch64 backend in particular. It has
been tested to work with SpiderMonkey.
This avoids the set uniqueness (hashing) test, reduces memory
churn when re-mapping virtual register onto real registers, and is
generally more memory-efficient.
This PR changes the aarch64 ABI implementation to use positive offsets
from SP, rather than negative offsets from FP, to refer to spill slots
and stack-local storage. This allows for better addressing-mode options,
and hence slightly better code: e.g., the unsigned scaled 12-bit offset
mode can be used to reach anywhere in a 32KB frame without extra
address-construction instructions, whereas negative offsets are limited
to a signed 9-bit unscaled mode (-256 bytes).
To enable this, the PR introduces a notion of "nominal SP offsets" as a
virtual addressing mode, lowered during the emission pass. The offsets
are relative to "SP after adjusting downward to allocate stack/spill
slots", but before pushing clobbers. This allows the addressing-mode
expressions to be generated before register allocation (or during it,
for spill/reload sequences).
To convert these offsets into *true* offsets from SP, we need to track
how much further SP is moved downward, and compensate for this. We do so
with "virtual SP offset adjustment" pseudo-instructions: these are seen
by the emission pass, and result in no instruction (0 byte output), but
update state that is now threaded through each instruction emission in
turn. In this way, we can push e.g. stack args for a call and adjust
the virtual SP offset, allowing reloads from nominal-SP-relative
spillslots while we do the argument setup with "real SP offsets" at the
same time.
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This patch adds the MachInst, or Machine Instruction, infrastructure.
This is the machine-independent portion of the new backend design. It
contains the implementation of the "vcode" (virtual-registerized code)
container, the top-level lowering algorithm and compilation pipeline,
and the trait definitions that the machine backends will fill in.
This backend infrastructure is included in the compilation of the
`codegen` crate, but it is not yet tied into the public APIs; that patch
will come last, after all the other pieces are filled in.
This patch contains code written by Julian Seward <jseward@acm.org> and
Benjamin Bouvier <public@benj.me>, originally developed on a side-branch
before rebasing and condensing into this patch series. See the `arm64`
branch at `https://github.com/cfallin/wasmtime` for original development
history.
Co-authored-by: Julian Seward <jseward@acm.org>
Co-authored-by: Benjamin Bouvier <public@benj.me>
