This file has grown quite a lot with `Store` over time so this splits it
up into three separate files, one for each of the main types defined in
it: `Config`, `Engine`, and `Store`.
This commit fixes an issue where when looking up the stack map for a pc
within a function we might end up reading the *previous* function's
stack maps. This then later caused asserts to trip because we started
interpreting random data as a `VMExternRef` when it wasn't. The fix was
to add `None` markers for "this range has no stack map" in the function
ranges map.
Closes#2386
* Use FMOV to move 64-bit FP registers and SIMD vectors.
* Add support for additional vector load types.
* Fix the printing of Inst::LoadAddr.
Copyright (c) 2020, Arm Limited.
The asserts on the sizes of the VCode constant-table data structures
introduced in PR #2328 are dependent on the size of data structures such
as `HashMap` in the standard library, which can change. In particular,
on Rust 1.46 (which is not current, but could be e.g. pinned by a
project using Cranelift), it appears that these asserts fail. We
shouldn't depend on stdlib internals; IMHO the asserts on our own struct
sizes are enough to catch accidental size blowups.
`lucetc` currently *almost*, but not quite, works with the new x64
backend; the only missing piece is support for the particular
instructions emitted as part of its prologue stack-check.
We do not normally see `brff`, `brif`, or `ifcmp_sp` in CLIF generated by
`cranelift-wasm` without the old-backend legalization rules, so these
were not supported in the new x64 backend as they were not necessary for
Wasm MVP support. Using them resulted in an `unimplemented!()` panic.
This PR adds support for `brff` and `brif` analogously to how AArch64
implements them, by pattern-matching the `ifcmp` / `ffcmp` directly.
Then `ifcmp_sp` is a straightforward variant of `ifcmp`.
Along the way, this also removes the notion of "fallthrough block" from
the branch-group lowering method; instead, `fallthrough` instructions
are handled as normal branches to their explicitly-provided targets,
which (in the original CLIF) match the fallthrough block. The reason for
this is that the block reordering done as part of lowering can change
the fallthrough block. We were not using `fallthrough` instructions in
the output produced by `cranelift-wasm`, so this, too, was not
previously caught.
With these changes, the `lucetc` crate in Lucet passes all tests with
the `x64` feature-flag added to its `cranelift-codegen` dependency.
This changes the following:
mov x0, #4
ldr x0, [x1, #4]
Into:
ldr x0, [x1]
I noticed this pattern (but with #0), in a benchmark.
Copyright (c) 2020, Arm Limited.
This commit fixes an issue with reference-types-using-modules where they
panicked on instantiation if any element segments had an externref null
specified.
* this requires upgrading to wasmparser 0.67.0.
* There are no CLIF side changes because the CLIF `select` instruction is
polymorphic enough.
* on aarch64, there is unfortunately no conditional-move (csel) instruction on
vectors. This patch adds a synthetic instruction `VecCSel` which *does*
behave like that. At emit time, this is emitted as an if-then-else diamond
(4 insns).
* aarch64 implementation is otherwise straightforwards.
In existing MachInst backends, many instructions -- any that can trap or
result in a relocation -- carry `SourceLoc` values in order to propagate
the location-in-original-source to use to describe resulting traps or
relocation errors.
This is quite tedious, and also error-prone: it is likely that the
necessary plumbing will be missed in some cases, and in any case, it's
unnecessarily verbose.
This PR factors out the `SourceLoc` handling so that it is tracked
during emission as part of the `EmitState`, and plumbed through
automatically by the machine-independent framework. Instruction emission
code that directly emits trap or relocation records can query the
current location as necessary. Then we only need to ensure that memory
references and trap instructions, at their (one) emission point rather
than their (many) lowering/generation points, are wired up correctly.
This does have the side-effect that some loads and stores that do not
correspond directly to user code's heap accesses will have unnecessary
but harmless trap metadata. For example, the load that fetches a code
offset from a jump table will have a 'heap out of bounds' trap record
attached to it; but because it is bounds-checked, and will never
actually trap if the lowering is correct, this should be harmless. The
simplicity improvement here seemed more worthwhile to me than plumbing
through a "corresponds to user-level load/store" bit, because the latter
is a bit complex when we allow for op merging.
Closes#2290: though it does not implement a full "metadata" scheme as
described in that issue, this seems simpler overall.
The JIT build_object routine currently rejects building object files
for any big-endian platform. However, most of the object builder
code works fine for either byte order, with the exception of a small
change in the ObjectBuilderTarget::new routine.
This patch adds that change and removes the assert in build_object.
When invoking a WebAssembly routine from Rust code, arguments
are stored into an array of u128, and read from a piece of
generated trampoline code before calling the compiled target
function using the platform ABI calling convention.
The WasmTy/WasmRet routines handle the conversion between Rust
data types and those u128 buffers. This currently works by
in effect converting the Rust object to a u128 and then storing
this u128 into the buffer. The generated trampoline code will
then read an object of appropriate type from the beginning of
that buffer.
This does not work on big-endian platforms, since the above
approach causes the value to be stored into the rightmost
bytes of the u128 buffer, while the trampoline code reads
the leftmost bytes.
This patch fixes the problem by changing WasmTy/WasmRet to
use the leftmost bytes as well, by casting the u128 pointer
to a pointer of the correct type before storing to it (or
reading from it).
(Note that it is not necessary to actually byte-swap the
values since the trampoline code will not treat them like
WebAssembly little-endian memory, but simply access them
in native byte order.)
The GuestType trait is used to access data elements in guest memory.
According to the WebAssembly spec, those are always stored in
little-endian byte order, even on big-endian hosts. Accessing such
elements on big-endian hosts therefore requires byte swapping.
Fixed by adding from_le_bytes / to_le_bytes.
We've generally moved to a model where `InstanceHandle` doesn't hold
ownership of its internals, instead relying on the caller to manage
that. This removes an allocation on the `Func::wrap` path but otherwise
shouldn't have much impact.
This commit adds lots of plumbing to get the type section from the
module linking proposal plumbed all the way through to the `wasmtime`
crate and the `wasmtime-c-api` crate. This isn't all that useful right
now because Wasmtime doesn't support imported/exported
modules/instances, but this is all necessary groundwork to getting that
exported at some point. I've added some light tests but I suspect the
bulk of the testing will come in a future commit.
One major change in this commit is that `SignatureIndex` no longer
follows type type index space in a wasm module. Instead a new
`TypeIndex` type is used to track that. Function signatures, still
indexed by `SignatureIndex`, are then packed together tightly.
This commit is intended to be the first of many in implementing the
module linking proposal. At this time this builds on #2059 so it
shouldn't land yet. The goal of this commit is to compile bare-bones
modules which use module linking, e.g. those with nested modules.
My hope with module linking is that almost everything in wasmtime only
needs mild refactorings to handle it. The goal is that all per-module
structures are still per-module and at the top level there's just a
`Vec` containing a bunch of modules. That's implemented currently where
`wasmtime::Module` contains `Arc<[CompiledModule]>` and an index of
which one it's pointing to. This should enable
serialization/deserialization of any module in a nested modules
scenario, no matter how you got it.
Tons of features of the module linking proposal are missing from this
commit. For example instantiation flat out doesn't work, nor does
import/export of modules or instances. That'll be coming as future
commits, but the purpose here is to start laying groundwork in Wasmtime
for handling lots of modules in lots of places.
This will hopefully remove a small thorn in our side with periodic
nightly breakage due to nightly features changing. This commit moves
lightbeam to stable Rust, swapping out `staticvec` for `arrayvec` and
otherwise updating some dependencies (namely `dynasm`) to compile with
stable.
This then also updates CI appropriately to not use a pinned nightly and
instead us a floating `nightly` channel so we can head off any breakage
coming up ASAP.
