* Implement a setting for reserved dynamic memory growth
Dynamic memories aren't really that heavily used in Wasmtime right now
because for most 32-bit memories they're classified as "static" which
means they reserve 4gb of address space and never move. Growth of a
static memory is simply making pages accessible, so it's quite fast.
With the memory64 feature, however, this is no longer true since all
memory64 memories are classified as "dynamic" at this time. Previous to
this commit growth of a dynamic memory unconditionally moved the entire
linear memory in the host's address space, always resulting in a new
`Mmap` allocation. This behavior is causing fuzzers to time out when
working with 64-bit memories because incrementally growing a memory by 1
page at a time can incur a quadratic time complexity as bytes are
constantly moved.
This commit implements a scheme where there is now a tunable setting for
memory to be reserved at the end of a dynamic memory to grow into. This
means that dynamic memory growth is ideally amortized as most calls to
`memory.grow` will be able to grow into the pre-reserved space. Some
calls, though, will still need to copy the memory around.
This helps enable a commented out test for 64-bit memories now that it's
fast enough to run in debug mode. This is because the growth of memory
in the test no longer needs to copy 4gb of zeros.
* Test fixes & review comments
* More comments
* Move `CompiledFunction` into wasmtime-cranelift
This commit moves the `wasmtime_environ::CompiledFunction` type into the
`wasmtime-cranelift` crate. This type has lots of Cranelift-specific
pieces of compilation and doesn't need to be generated by all Wasmtime
compilers. This replaces the usage in the `Compiler` trait with a
`Box<Any>` type that each compiler can select. Each compiler must still
produce a `FunctionInfo`, however, which is shared information we'll
deserialize for each module.
The `wasmtime-debug` crate is also folded into the `wasmtime-cranelift`
crate as a result of this commit. One possibility was to move the
`CompiledFunction` commit into its own crate and have `wasmtime-debug`
depend on that, but since `wasmtime-debug` is Cranelift-specific at this
time it didn't seem like it was too too necessary to keep it separate.
If `wasmtime-debug` supports other backends in the future we can
recreate a new crate, perhaps with it refactored to not depend on
Cranelift.
* Move wasmtime_environ::reference_type
This now belongs in wasmtime-cranelift and nowhere else
* Remove `Type` reexport in wasmtime-environ
One less dependency on `cranelift-codegen`!
* Remove `types` reexport from `wasmtime-environ`
Less cranelift!
* Remove `SourceLoc` from wasmtime-environ
Change the `srcloc`, `start_srcloc`, and `end_srcloc` fields to a custom
`FilePos` type instead of `ir::SourceLoc`. These are only used in a few
places so there's not much to lose from an extra abstraction for these
leaf use cases outside of cranelift.
* Remove wasmtime-environ's dep on cranelift's `StackMap`
This commit "clones" the `StackMap` data structure in to
`wasmtime-environ` to have an independent representation that that
chosen by Cranelift. This allows Wasmtime to decouple this runtime
dependency of stack map information and let the two evolve
independently, if necessary.
An alternative would be to refactor cranelift's implementation into a
separate crate and have wasmtime depend on that but it seemed a bit like
overkill to do so and easier to clone just a few lines for this.
* Define code offsets in wasmtime-environ with `u32`
Don't use Cranelift's `binemit::CodeOffset` alias to define this field
type since the `wasmtime-environ` crate will be losing the
`cranelift-codegen` dependency soon.
* Commit to using `cranelift-entity` in Wasmtime
This commit removes the reexport of `cranelift-entity` from the
`wasmtime-environ` crate and instead directly depends on the
`cranelift-entity` crate in all referencing crates. The original reason
for the reexport was to make cranelift version bumps easier since it's
less versions to change, but nowadays we have a script to do that.
Otherwise this encourages crates to use whatever they want from
`cranelift-entity` since we'll always depend on the whole crate.
It's expected that the `cranelift-entity` crate will continue to be a
lean crate in dependencies and suitable for use at both runtime and
compile time. Consequently there's no need to avoid its usage in
Wasmtime at runtime, since "remove Cranelift at compile time" is
primarily about the `cranelift-codegen` crate.
* Remove most uses of `cranelift-codegen` in `wasmtime-environ`
There's only one final use remaining, which is the reexport of
`TrapCode`, which will get handled later.
* Limit the glob-reexport of `cranelift_wasm`
This commit removes the glob reexport of `cranelift-wasm` from the
`wasmtime-environ` crate. This is intended to explicitly define what
we're reexporting and is a transitionary step to curtail the amount of
dependencies taken on `cranelift-wasm` throughout the codebase. For
example some functions used by debuginfo mapping are better imported
directly from the crate since they're Cranelift-specific. Note that
this is intended to be a temporary state affairs, soon this reexport
will be gone entirely.
Additionally this commit reduces imports from `cranelift_wasm` and also
primarily imports from `crate::wasm` within `wasmtime-environ` to get a
better sense of what's imported from where and what will need to be
shared.
* Extract types from cranelift-wasm to cranelift-wasm-types
This commit creates a new crate called `cranelift-wasm-types` and
extracts type definitions from the `cranelift-wasm` crate into this new
crate. The purpose of this crate is to be a shared definition of wasm
types that can be shared both by compilers (like Cranelift) as well as
wasm runtimes (e.g. Wasmtime). This new `cranelift-wasm-types` crate
doesn't depend on `cranelift-codegen` and is the final step in severing
the unconditional dependency from Wasmtime to `cranelift-codegen`.
The final refactoring in this commit is to then reexport this crate from
`wasmtime-environ`, delete the `cranelift-codegen` dependency, and then
update all `use` paths to point to these new types.
The main change of substance here is that the `TrapCode` enum is
mirrored from Cranelift into this `cranelift-wasm-types` crate. While
this unfortunately results in three definitions (one more which is
non-exhaustive in Wasmtime itself) it's hopefully not too onerous and
ideally something we can patch up in the future.
* Get lightbeam compiling
* Remove unnecessary dependency
* Fix compile with uffd
* Update publish script
* Fix more uffd tests
* Rename cranelift-wasm-types to wasmtime-types
This reflects the purpose a bit more where it's types specifically
intended for Wasmtime and its support.
* Fix publish script
* Always call the resource limiter for memory allocations
Previously the memory64 support meant that sometimes we wouldn't call
the limiter because the calculation for the minimum size requested would
overflow. Instead Wasmtime now wraps the minimum size in something a bit
smaller than the address space to inform the limiter, which should
guarantee that although the limiter is called with "incorrect"
information it's effectively correct and is allowed a pass to learn that
a massive memory was requested.
This was found by the fuzzers where a request for the absolute maximal
size of 64-bit memory (e.g. the entire 64-bit address space) didn't
actually invoke the limiter which means that we mis-classified an
instantiation error and didn't realize that it was an OOM.
* Add a test
This commit started off by deleting the `cranelift_codegen::settings`
reexport in the `wasmtime-environ` crate and then basically played
whack-a-mole until everything compiled again. The main result of this is
that the `wasmtime-*` family of crates have generally less of a
dependency on the `TargetIsa` trait and type from Cranelift. While the
dependency isn't entirely severed yet this is at least a significant
start.
This commit is intended to be largely refactorings, no functional
changes are intended here. The refactorings are:
* A `CompilerBuilder` trait has been added to `wasmtime_environ` which
server as an abstraction used to create compilers and configure them
in a uniform fashion. The `wasmtime::Config` type now uses this
instead of cranelift-specific settings. The `wasmtime-jit` crate
exports the ability to create a compiler builder from a
`CompilationStrategy`, which only works for Cranelift right now. In a
cranelift-less build of Wasmtime this is expected to return a trait
object that fails all requests to compile.
* The `Compiler` trait in the `wasmtime_environ` crate has been souped
up with a number of methods that Wasmtime and other crates needed.
* The `wasmtime-debug` crate is now moved entirely behind the
`wasmtime-cranelift` crate.
* The `wasmtime-cranelift` crate is now only depended on by the
`wasmtime-jit` crate.
* Wasm types in `cranelift-wasm` no longer contain their IR type,
instead they only contain the `WasmType`. This is required to get
everything to align correctly but will also be required in a future
refactoring where the types used by `cranelift-wasm` will be extracted
to a separate crate.
* I moved around a fair bit of code in `wasmtime-cranelift`.
* Some gdb-specific jit-specific code has moved from `wasmtime-debug` to
`wasmtime-jit`.
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
* Consolidate address calculations for atomics
This commit consolidates all calcuations of guest addresses into one
`prepare_addr` function. This notably remove the atomics-specifics paths
as well as the `prepare_load` function (now renamed to `prepare_addr`
and folded into `get_heap_addr`).
The goal of this commit is to simplify how addresses are managed in the
code generator for atomics to use all the shared infrastrucutre of other
loads/stores as well. This additionally fixes#3132 via the use of
`heap_addr` in clif for all operations.
I also added a number of tests for loads/stores with varying alignments.
Originally I was going to allow loads/stores to not be aligned since
that's what the current formal specification says, but the overview of
the threads proposal disagrees with the formal specification, so I
figured I'd leave it as-is but adding tests probably doesn't hurt.
Closes#3132
* Fix old backend
* Guarantee misalignment checks happen before out-of-bounds
* Change VMMemoryDefinition::current_length to `usize`
This commit changes the definition of
`VMMemoryDefinition::current_length` to `usize` from its previous
definition of `u32`. This is a pretty impactful change because it also
changes the cranelift semantics of "dynamic" heaps where the bound
global value specifier must now match the pointer type for the platform
rather than the index type for the heap.
The motivation for this change is that the `current_length` field (or
bound for the heap) is intended to reflect the current size of the heap.
This is bound by `usize` on the host platform rather than `u32` or`
u64`. The previous choice of `u32` couldn't represent a 4GB memory
because we couldn't put a number representing 4GB into the
`current_length` field. By using `usize`, which reflects the host's
memory allocation, this should better reflect the size of the heap and
allows Wasmtime to support a full 4GB heap for a wasm program (instead
of 4GB minus one page).
This commit also updates the legalization of the `heap_addr` clif
instruction to appropriately cast the address to the platform's pointer
type, handling bounds checks along the way. The practical impact for
today's targets is that a `uextend` is happening sooner than it happened
before, but otherwise there is no intended impact of this change. In the
future when 64-bit memories are supported there will likely need to be
fancier logic which handles offsets a bit differently (especially in the
case of a 64-bit memory on a 32-bit host).
The clif `filetest` changes should show the differences in codegen, and
the Wasmtime changes are largely removing casts here and there.
Closes#3022
* Add tests for memory.size at maximum memory size
* Add a dfg helper method
This was needed a long time ago in the original implementation when the
function being called here was hotter than it was before, but nowadays
this function isn't hot as it's protected elsewhere from being
repeatedly called, so the caching thread local is no longer necessary.
* Add a type parameter to `VMOffsets` for pointer size
This commit adds a type parameter to `VMOffsets` representing the
pointer size to improve computations in `wasmtime-runtime` which always
use a constant value of the host's pointer size. The type parameter is
`u8` for `wasmtime-cranelift`'s use case where cross-compilation may be
involved.
* fix lightbeam
* Restore POSIX signal handling on MacOS behind a feature flag
As described in Issue #3052, the switch to Mach Exception handling
removed `unix::StoreExt` from the public API of crate on MacOS.
That is a breaking change and makes it difficult for some
application to upgrade to the current stable Wasmtime.
As a workaround this PR introduces a feature flag called
`posix-signals-on-macos` that restores the old behaviour on MacOS.
The flag is disabled by default.
* Fix test guard
* Fix formatting in the test
* Start a high-level architecture document for Wasmtime
This commit cleands up some existing documentation by removing a number
of "noop README files" and starting a high-level overview of the
architecture of Wasmtime. I've placed this documentation under the
contributing section of the book since it seems most useful for possible
contributors.
I've surely left some things out in this pass, and am happy to add more!
* Review comments
* More rewording
* typos
This commit slims down the list of builtin intrinsics. It removes the
duplicated intrinsics for imported and locally defined items, instead
always using one intrinsic for both. This was previously inconsistently
applied where some intrinsics got two copies (one for imported one for
local) and other intrinsics got only one copy. This does add an extra
branch in intrinsics since they need to determine whether something is
local or not, but that's generally much lower cost than the intrinsics
themselves.
This also removes the `memory32_size` intrinsic, instead inlining the
codegen directly into the clif IR. This matches what the `table.size`
instruction does and removes the need for a few functions on a
`wasmtime_runtime::Instance`.
This commit removes some one-use methods to inline them at their use
site, and otherwise adds bounds checks to other functions like
`imported_function` where previously the `FuncIndex` may have been
accidentally out of bounds, which would cause memory unsafety. There's
no actual bug this was fixing, just trying to improve the safety of the
code internally a little.
The current_length member is defined as "usize" in Rust code,
but generated wasm code refers to it as if it were "u32".
While this happens to mostly work on little-endian machines
(as long as the length is < 4GB), it will always fail on
big-endian machines.
Fixed by making current_length "u32" in Rust as well, and
ensuring the actual memory size is always less than 4GB.
This commit adds a `#[link]` annotation to the block defining symbols
coming from a native static library that we build and link. This is
required by rustc to get symbols to get exported correctly when linking
wasmtime into a Rust dynamic library instead of always as an rlib.
While I was at it I went ahead and renamed the symbols now that they're
no longer in C++ and they're doing setjmp/longjmp and not much else.
Closes#3006
* Add guard pages to the front of linear memories
This commit implements a safety feature for Wasmtime to place guard
pages before the allocation of all linear memories. Guard pages placed
after linear memories are typically present for performance (at least)
because it can help elide bounds checks. Guard pages before a linear
memory, however, are never strictly needed for performance or features.
The intention of a preceding guard page is to help insulate against bugs
in Cranelift or other code generators, such as CVE-2021-32629.
This commit adds a `Config::guard_before_linear_memory` configuration
option, defaulting to `true`, which indicates whether guard pages should
be present both before linear memories as well as afterwards. Guard
regions continue to be controlled by
`{static,dynamic}_memory_guard_size` methods.
The implementation here affects both on-demand allocated memories as
well as the pooling allocator for memories. For on-demand memories this
adjusts the size of the allocation as well as adjusts the calculations
for the base pointer of the wasm memory. For the pooling allocator this
will place a singular extra guard region at the very start of the
allocation for memories. Since linear memories in the pooling allocator
are contiguous every memory already had a preceding guard region in
memory, it was just the previous memory's guard region afterwards. Only
the first memory needed this extra guard.
I've attempted to write some tests to help test all this, but this is
all somewhat tricky to test because the settings are pretty far away
from the actual behavior. I think, though, that the tests added here
should help cover various use cases and help us have confidence in
tweaking the various `Config` settings beyond their defaults.
Note that this also contains a semantic change where
`InstanceLimits::memory_reservation_size` has been removed. Instead this
field is now inferred from the `static_memory_maximum_size` and guard
size settings. This should hopefully remove some duplication in these
settings, canonicalizing on the guard-size/static-size settings as the
way to control memory sizes and virtual reservations.
* Update config docs
* Fix a typo
* Fix benchmark
* Fix wasmtime-runtime tests
* Fix some more tests
* Try to fix uffd failing test
* Review items
* Tweak 32-bit defaults
Makes the pooling allocator a bit more reasonable by default on 32-bit
with these settings.
* Reimplement how instance exports are stored/loaded
This commit internally refactors how instance exports are handled and
fixes two issues. One issue is that when we instantiate an instance we
no longer forcibly load all items from the instance immediately,
deferring insertion of each item into the store data tables to happen
later as necessary. The next issue is that repeated calls to
`Caller::get_export` would continuously insert items into the store data
tables. While working as intended this was undesirable because it would
continuously push onto a vector that only got deallocated once the
entire store was deallocate. Now it's routed to `Instance::get_export`
which doesn't have this behavior.
Closes#2916Closes#2983
* Just define our own `Either`
* wasmtime_runtime: move ResourceLimiter defaults into this crate
In preparation of changing wasmtime::ResourceLimiter to be a re-export
of this definition, because translating between two traits was causing
problems elsewhere.
* wasmtime: make ResourceLimiter a re-export of wasmtime_runtime::ResourceLimiter
* refactor Store internals to support ResourceLimiter as part of store's data
* add hooks for entering and exiting native code to Store
* wasmtime-wast, fuzz: changes to adapt ResourceLimiter API
* fix tests
* wrap calls into wasm with entering/exiting exit hooks as well
* the most trivial test found a bug, lets write some more
* store: mark some methods as #[inline] on Store, StoreInner, StoreInnerMost
Co-authored-By: Alex Crichton <alex@alexcrichton.com>
* improve tests for the entering/exiting native hooks
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Implement Wasmtime's new API as designed by RFC 11. This is quite a large commit which has had lots of discussion externally, so for more information it's best to read the RFC thread and the PR thread.
This adds benchmarks around module instantiation using criterion.
Both the default (i.e. on-demand) and pooling allocators are tested
sequentially and in parallel using a thread pool.
Instantiation is tested with an empty module, a module with a single page
linear memory, a larger linear memory with a data initializer, and a "hello
world" Rust WASI program.
On s390x, SIGILL and SIGFPE are delivered with the PSW address
pointing *after* the faulting instruction, while SIGSEGV and
SIGBUS are delivered with the PSW address pointing *to* the
faulting instruction. In order to support this, the common
code trap handler has to distinguish between those cases.
Also, enable SIGFPE on s390x (just like on x86).
* Bring back per-thread lazy initialization
Platforms Wasmtime supports may have per-thread initialization that
needs to run before WebAssembly. For example Unix needs to setup a
sigaltstack and macOS needs to set up mach ports. In #2757 this
per-thread setup was moved out of the invocation of a wasm function,
relying on the lack of Send for Store to initialize the thread at Store
creation time and never worry about it later.
This conflicted with [wasmtime's desired multithreading
story](https://github.com/bytecodealliance/wasmtime/pull/2812) so a new
[`Store::notify_switched_thread` was
added](https://github.com/bytecodealliance/wasmtime/pull/2822) to
explicitly indicate a Store has moved to another thread (if it unsafely
did so).
It turns out though that it's not always easy to determine when a
`Store` moves to a new thread. For example the Go bindings for Wasmtime
are generally unaware when a goroutine switches OS threads. This led to
https://github.com/bytecodealliance/wasmtime-go/issues/74 where a SIGILL
was left uncaught, making it appear that traps aren't working properly.
This commit revisits the decision in #2757 and moves per-thread
initialization back into the path of calling into WebAssembly. This is
differently from before, though, where there's still only one TLS access
on the path of calling into WebAssembly, unlike before where it was a
separate access. This allows us to get the speed benefits of #2757 as
well as the flexibility benefits of not having to explicitly move a
store between threads.
With this new ability this commit deletes the recently added
`Store::notify_switched_thread` method since it's no longer necessary.
* Fix a test compiling
* Optimize `table.init` instruction and instantiation
This commit optimizes table initialization as part of instance
instantiation and also applies the same optimization to the `table.init`
instruction. One part of this commit is to remove some preexisting
duplication between instance instantiation and the `table.init`
instruction itself, after this the actual implementation of `table.init`
is optimized to effectively have fewer bounds checks in fewer places and
have a much tighter loop for instantiation.
A big fallout from this change is that memory/table initializer offsets
are now stored as `u32` instead of `usize` to remove a few casts in a
few places. This ended up requiring moving some overflow checks that
happened in parsing to later in code itself because otherwise the wrong
spec test errors are emitted during testing. I've tried to trace where
these can possibly overflow but I think that I managed to get
everything.
In a local synthetic test where an empty module with a single 80,000
element initializer this improves total instantiation time by 4x (562us
=> 141us)
* Review comments
* Add resource limiting to the Wasmtime API.
This commit adds a `ResourceLimiter` trait to the Wasmtime API.
When used in conjunction with `Store::new_with_limiter`, this can be used to
monitor and prevent WebAssembly code from growing linear memories and tables.
This is particularly useful when hosts need to take into account host resource
usage to determine if WebAssembly code can consume more resources.
A simple `StaticResourceLimiter` is also included with these changes that will
simply limit the size of linear memories or tables for all instances created in
the store based on static values.
* Code review feedback.
* Implemented `StoreLimits` and `StoreLimitsBuilder`.
* Moved `max_instances`, `max_memories`, `max_tables` out of `Config` and into
`StoreLimits`.
* Moved storage of the limiter in the runtime into `Memory` and `Table`.
* Made `InstanceAllocationRequest` use a reference to the limiter.
* Updated docs.
* Made `ResourceLimiterProxy` generic to remove a level of indirection.
* Fixed the limiter not being used for `wasmtime::Memory` and
`wasmtime::Table`.
* Code review feedback and bug fix.
* `Memory::new` now returns `Result<Self>` so that an error can be returned if
the initial requested memory exceeds any limits placed on the store.
* Changed an `Arc` to `Rc` as the `Arc` wasn't necessary.
* Removed `Store` from the `ResourceLimiter` callbacks. Custom resource limiter
implementations are free to capture any context they want, so no need to
unnecessarily store a weak reference to `Store` from the proxy type.
* Fixed a bug in the pooling instance allocator where an instance would be
leaked from the pool. Previously, this would only have happened if the OS was
unable to make the necessary linear memory available for the instance. With
these changes, however, the instance might not be created due to limits
placed on the store. We now properly deallocate the instance on error.
* Added more tests, including one that covers the fix mentioned above.
* Code review feedback.
* Add another memory to `test_pooling_allocator_initial_limits_exceeded` to
ensure a partially created instance is successfully deallocated.
* Update some doc comments for better documentation of `Store` and
`ResourceLimiter`.
This commit uses a two-phase lookup of stack map information from modules
rather than giving back raw pointers to stack maps.
First the runtime looks up information about a module from a pc value, which
returns an `Arc` it keeps a reference on while completing the stack map lookup.
Second it then queries the module information for the stack map from a pc
value, getting a reference to the stack map (which is now safe because of the
`Arc` held by the runtime).
* Make `FunctionInfo` public and `CompiledModule::func_info` return it.
* Make the `StackMapLookup` trait unsafe.
* Add comments for the purpose of `EngineHostFuncs`.
* Rework ownership model of shared signatures: `SignatureCollection` in
conjunction with `SignatureRegistry` is now used so that the `Engine`,
`Store`, and `Module` don't need to worry about unregistering shared
signatures.
* Implement `Func::param_arity` and `Func::result_arity` in terms of
`Func::ty`.
* Make looking up a trampoline with the module registry more efficient by doing
a binary search on the function's starting PC value for the owning module and
then looking up the trampoline with only that module.
* Remove reference to the shared signatures from `GlobalRegisteredModule`.
This commit removes the stack map registry and instead uses the existing
information from the store's module registry to lookup stack maps.
A trait is now used to pass the lookup context to the runtime, implemented by
`Store` to do the lookup.
With this change, module registration in `Store` is now entirely limited to
inserting the module into the module registry.
This commit moves the shared signature registry out of `Store` and into
`Engine`.
This helps eliminate work that was performed whenever a `Module` was
instantiated into a `Store`.
Now a `Module` is registered with the shared signature registry upon creation,
storing the mapping from the module's signature index space to the shared index
space.
This also refactors the "frame info" registry into a general purpose "module
registry" that is used to look up trap information, signature information, and
(soon) stack map information.
This commit is intended to be a perf improvement for instantiation of
modules with lots of functions. Previously the `lookup_shared_signature`
callback was showing up quite high in profiles as part of instantiation.
As some background, this callback is used to translate from a module's
`SignatureIndex` to a `VMSharedSignatureIndex` which the instance
stores. This callback is called for two reasons, one is to translate all
of the module's own types into `VMSharedSignatureIndex` for the purposes
of `call_indirect` (the translation of that loads from this table to
compare indices). The second reason is that a `VMCallerCheckedAnyfunc`
is prepared for all functions and this embeds a `VMSharedSignatureIndex`
inside of it.
The slow part today is that the lookup callback was called
once-per-function and each lookup involved hashing a full
`WasmFuncType`. Albeit our hash algorithm is still Rust's default
SipHash algorithm which is quite slow, but we also shouldn't need to
re-hash each signature if we see it multiple times anyway.
The fix applied in this commit is to change this lookup callback to an
`enum` where one variant is that there's a table to lookup from. This
table is a `PrimaryMap` which means that lookup is quite fast. The only
thing we need to do is to prepare the table ahead of time. Currently
this happens on the instantiation path because in my measurments the
creation of the table is quite fast compared to the rest of
instantiation. If this becomes an issue, though, we can look into
creating the table as part of `SigRegistry::register_module` and caching
it somewhere (I'm not entirely sure where but I'm sure we can figure it
out).
There's in generally not a ton of efficiency around the `SigRegistry`
type. I'm hoping though that this fixes the next-lowest-hanging-fruit in
terms of performance without complicating the implementation too much. I
tried a few variants and this change seemed like the best balance
between simplicity and still a nice performance gain.
Locally I measured an improvement in instantiation time for a large-ish
module by reducing the time from ~3ms to ~2.6ms per instance.
This commit updates the implementation of `VMOffsets` to frontload all
checked arithmetic on construction of the `VMOffsets` which allows
eliding all checked arithmetic when accessing the fields of `VMOffsets`.
For testing and such this adds a new constructor as well from a new
`VMOffsetsFields` structure which is a clone of the old definition.
This should help speed up some profile hot spots I've been seeing where
with all the checked arithmetic on field sizes this was slowing down the
various accessors during instantiation (which uses `VMOffsets` to
initialize various fields of the `VMContext`).
Looking at some profiles these or their related functions were all
showing up, so this commit adds `#[inline]` to allow cross-crate
inlining by default.
- some tests don't pass because of bad interactions with the system's
libunwind; ignore them for now.
- the page size on mac aarch64 is 16K, not 4K; tweak some tests which
were expecting 4K or multiples of 4K pages to use a multiple of host page size
instead.
- a cranelift-native test needed an update for the new calling convention.
This commit fixes a bug where the wrong destination range was used when copying
data from the module's memory initialization upon instance initialization.
This affects the on-demand allocator only when using the `uffd` feature on
Linux and when the Wasm page being initialized is not the last in the module's
initial pages.
Fixes#2784.
* Use stable Rust on CI to test the x64 backend
This commit leverages the newly-released 1.51.0 compiler to test the
new backend on Windows and Linux with a stable compiler instead of a
nightly compiler. This isolates the nightly build to just the nightly
documentation generation and fuzzing, both of which rely on nightly for
the best results right now.
* Use updated stable in book build job
* Run rustfmt for new stable
* Silence new warnings for wasi-nn
* Allow some dead code in the x64 backend
Looks like new rustc is better about emitting some dead-code warnings
* Update rust in peepmatic job
* Fix a test in the pooling allocator
* Remove `package.metdata.docs.rs` temporarily
Needs resolution of https://github.com/rust-lang/cargo/pull/9300 first
* Fix a warning in a wasi-nn example
* Combine stack-based cleanups for faster wasm calls
This commit is an extension of #2757 where the goal is to optimize entry
into WebAssembly. Currently wasmtime has two stack-based cleanups when
entering wasm, one for the externref activation table and another for
stack limits getting reset. This commit fuses these two cleanups
together into one and moves some code around which enables less captures
for fewer closures and such to speed up calls in to wasm a bit more.
Overall this drops the execution time from 88ns to 80ns locally for me.
This also updates the atomic orderings when updating the stack limit
from `SeqCst` to `Relaxed`. While `SeqCst` is a reasonable starting
point the usage here should be safe to use `Relaxed` since we're not
using the atomics to actually protect any memory, it's simply receiving
signals from other threads.
* Determine whether a pc is wasm via a global map
The macOS implementation of traps recently changed to using mach ports
for handlers instead of signal handlers. This means that a previously
relied upon invariant, each thread fixes its own trap, was broken. The
macOS implementation worked around this by maintaining a global map from
thread id to thread local information, however, to solve the problem.
This global map is quite slow though. It involves taking a lock and
updating a hash map on all calls into WebAssembly. In my local testing
this accounts for >70% of the overhead of calling into WebAssembly on
macOS. Naturally it'd be great to remove this!
This commit fixes this issue and removes the global lock/map that is
updated on all calls into WebAssembly. The fix is to maintain a global
map of wasm modules and their trap addresses in the `wasmtime` crate.
Doing so is relatively simple since we're already tracking this
information at the `Store` level.
Once we've got a global map then the macOS implementation can use this
from a foreign thread and everything works out.
Locally this brings the overhead, on macOS specifically, of calling into
wasm from 80ns to ~20ns.
* Fix compiles
* Review comments
