* Implement a setting for reserved dynamic memory growth
Dynamic memories aren't really that heavily used in Wasmtime right now
because for most 32-bit memories they're classified as "static" which
means they reserve 4gb of address space and never move. Growth of a
static memory is simply making pages accessible, so it's quite fast.
With the memory64 feature, however, this is no longer true since all
memory64 memories are classified as "dynamic" at this time. Previous to
this commit growth of a dynamic memory unconditionally moved the entire
linear memory in the host's address space, always resulting in a new
`Mmap` allocation. This behavior is causing fuzzers to time out when
working with 64-bit memories because incrementally growing a memory by 1
page at a time can incur a quadratic time complexity as bytes are
constantly moved.
This commit implements a scheme where there is now a tunable setting for
memory to be reserved at the end of a dynamic memory to grow into. This
means that dynamic memory growth is ideally amortized as most calls to
`memory.grow` will be able to grow into the pre-reserved space. Some
calls, though, will still need to copy the memory around.
This helps enable a commented out test for 64-bit memories now that it's
fast enough to run in debug mode. This is because the growth of memory
in the test no longer needs to copy 4gb of zeros.
* Test fixes & review comments
* More comments
* Move `CompiledFunction` into wasmtime-cranelift
This commit moves the `wasmtime_environ::CompiledFunction` type into the
`wasmtime-cranelift` crate. This type has lots of Cranelift-specific
pieces of compilation and doesn't need to be generated by all Wasmtime
compilers. This replaces the usage in the `Compiler` trait with a
`Box<Any>` type that each compiler can select. Each compiler must still
produce a `FunctionInfo`, however, which is shared information we'll
deserialize for each module.
The `wasmtime-debug` crate is also folded into the `wasmtime-cranelift`
crate as a result of this commit. One possibility was to move the
`CompiledFunction` commit into its own crate and have `wasmtime-debug`
depend on that, but since `wasmtime-debug` is Cranelift-specific at this
time it didn't seem like it was too too necessary to keep it separate.
If `wasmtime-debug` supports other backends in the future we can
recreate a new crate, perhaps with it refactored to not depend on
Cranelift.
* Move wasmtime_environ::reference_type
This now belongs in wasmtime-cranelift and nowhere else
* Remove `Type` reexport in wasmtime-environ
One less dependency on `cranelift-codegen`!
* Remove `types` reexport from `wasmtime-environ`
Less cranelift!
* Remove `SourceLoc` from wasmtime-environ
Change the `srcloc`, `start_srcloc`, and `end_srcloc` fields to a custom
`FilePos` type instead of `ir::SourceLoc`. These are only used in a few
places so there's not much to lose from an extra abstraction for these
leaf use cases outside of cranelift.
* Remove wasmtime-environ's dep on cranelift's `StackMap`
This commit "clones" the `StackMap` data structure in to
`wasmtime-environ` to have an independent representation that that
chosen by Cranelift. This allows Wasmtime to decouple this runtime
dependency of stack map information and let the two evolve
independently, if necessary.
An alternative would be to refactor cranelift's implementation into a
separate crate and have wasmtime depend on that but it seemed a bit like
overkill to do so and easier to clone just a few lines for this.
* Define code offsets in wasmtime-environ with `u32`
Don't use Cranelift's `binemit::CodeOffset` alias to define this field
type since the `wasmtime-environ` crate will be losing the
`cranelift-codegen` dependency soon.
* Commit to using `cranelift-entity` in Wasmtime
This commit removes the reexport of `cranelift-entity` from the
`wasmtime-environ` crate and instead directly depends on the
`cranelift-entity` crate in all referencing crates. The original reason
for the reexport was to make cranelift version bumps easier since it's
less versions to change, but nowadays we have a script to do that.
Otherwise this encourages crates to use whatever they want from
`cranelift-entity` since we'll always depend on the whole crate.
It's expected that the `cranelift-entity` crate will continue to be a
lean crate in dependencies and suitable for use at both runtime and
compile time. Consequently there's no need to avoid its usage in
Wasmtime at runtime, since "remove Cranelift at compile time" is
primarily about the `cranelift-codegen` crate.
* Remove most uses of `cranelift-codegen` in `wasmtime-environ`
There's only one final use remaining, which is the reexport of
`TrapCode`, which will get handled later.
* Limit the glob-reexport of `cranelift_wasm`
This commit removes the glob reexport of `cranelift-wasm` from the
`wasmtime-environ` crate. This is intended to explicitly define what
we're reexporting and is a transitionary step to curtail the amount of
dependencies taken on `cranelift-wasm` throughout the codebase. For
example some functions used by debuginfo mapping are better imported
directly from the crate since they're Cranelift-specific. Note that
this is intended to be a temporary state affairs, soon this reexport
will be gone entirely.
Additionally this commit reduces imports from `cranelift_wasm` and also
primarily imports from `crate::wasm` within `wasmtime-environ` to get a
better sense of what's imported from where and what will need to be
shared.
* Extract types from cranelift-wasm to cranelift-wasm-types
This commit creates a new crate called `cranelift-wasm-types` and
extracts type definitions from the `cranelift-wasm` crate into this new
crate. The purpose of this crate is to be a shared definition of wasm
types that can be shared both by compilers (like Cranelift) as well as
wasm runtimes (e.g. Wasmtime). This new `cranelift-wasm-types` crate
doesn't depend on `cranelift-codegen` and is the final step in severing
the unconditional dependency from Wasmtime to `cranelift-codegen`.
The final refactoring in this commit is to then reexport this crate from
`wasmtime-environ`, delete the `cranelift-codegen` dependency, and then
update all `use` paths to point to these new types.
The main change of substance here is that the `TrapCode` enum is
mirrored from Cranelift into this `cranelift-wasm-types` crate. While
this unfortunately results in three definitions (one more which is
non-exhaustive in Wasmtime itself) it's hopefully not too onerous and
ideally something we can patch up in the future.
* Get lightbeam compiling
* Remove unnecessary dependency
* Fix compile with uffd
* Update publish script
* Fix more uffd tests
* Rename cranelift-wasm-types to wasmtime-types
This reflects the purpose a bit more where it's types specifically
intended for Wasmtime and its support.
* Fix publish script
The main purpose for doing this is that this is a large piece of
functionality used by Wasmtime which is entirely independent of
Cranelift. Eventually Wasmtime wants to be able to compile without
Cranelift, but it can't also depend on `cranelift-wasm` in that
situation for module translation which means that something needs to
happen. One option is to refactor what's in `cranelift-wasm` into a
separate crate (since all these pieces don't actually depend on
`cranelift-codegen`), but I personally chose to not do this because:
* The `ModuleEnvironment` trait, AFAIK, only has a primary user of
Wasmtime. The Spidermonkey integration, for example, does not use this.
* This is an extra layer of abstraction between Wasmtime and the
compilation phase which was a bit of a pain to maintain. It couldn't
be Wasmtime-specific as it was part of Cranelift but at the same time
it had lots of Wasmtime-centric functionality (such as module
linking).
* Updating the "dummy" implementation has become pretty onerous over
time as frequent additions are made and the "dummy" implementation was
never actually used anywhere. This ended up feeling like effectively
busy-work to update this.
For these reasons I've opted to to move the meat of `cranelift-wasm`
used by `wasmtime-environ` directly into `wasmtime-environ`. This means
that the only real meat that Wasmtime uses from `cranelift-wasm` is the
function-translation bits in the `wasmtime-cranelift` crate.
The changes in `wasmtime-environ` are largely to inline module parsing
together so it's a bit easier to follow instead of trying to connect
the dots between lots of various function calls.
* Reimplement how unwind information is stored
This commit is a major refactoring of how unwind information is stored
after compilation of a function has finished. Previously we would store
the raw `UnwindInfo` as a result of compilation and this would get
serialized/deserialized alongside the rest of the ELF object that
compilation creates. Whenever functions were registered with
`CodeMemory` this would also result in registering unwinding information
dynamically at runtime, which in the case of Unix, for example, would
dynamically created FDE/CIE entries on-the-fly.
Eventually I'd like to support compiling Wasmtime without Cranelift, but
this means that `UnwindInfo` wouldn't be easily available to decode into
and create unwinding information from. To solve this I've changed the
ELF object created to have the unwinding information encoded into it
ahead-of-time so loading code into memory no longer needs to create
unwinding tables. This change has two different implementations for
Windows/Unix:
* On Windows the implementation was much easier. The unwinding
information on Windows is already stored after the function itself in
the text section. This was actually slightly duplicated in object
building and in code memory allocation. Now the object building
continues to do the same, recording unwinding information after
functions, and code memory no longer manually tracks this.
Additionally Wasmtime will emit a special custom section in the object
file with unwinding information which is the list of
`RUNTIME_FUNCTION` structures that `RtlAddFunctionTable` expects. This
means that the object file has all the information precompiled into it
and registration at runtime is simply passing a few pointers around to
the runtime.
* Unix was a little bit more difficult than Windows. Today a `.eh_frame`
section is created on-the-fly with offsets in FDEs specified as the
absolute address that functions are loaded at. This absolute
address hindered the ability to precompile the FDE into the object
file itself. I've switched how addresses are encoded, though, to using
`DW_EH_PE_pcrel` which means that FDE addresses are now specified
relative to the FDE itself. This means that we can maintain a fixed
offset between the `.eh_frame` loaded in memory and the beginning of
code memory. When doing so this enables precompiling the `.eh_frame`
section into the object file and at runtime when loading an object no
further construction of unwinding information is needed.
The overall result of this commit is that unwinding information is no
longer stored in its cranelift-data-structure form on disk. This means
that this unwinding information format is only present during
compilation, which will make it that much easier to compile out
cranelift in the future.
This commit also significantly refactors `CodeMemory` since the way
unwinding information is handled is not much different from before.
Previously `CodeMemory` was suitable for incrementally adding more and
more functions to it, but nowadays a `CodeMemory` either lives per
module (in which case all functions are known up front) or it's created
once-per-`Func::new` with two trampolines. In both cases we know all
functions up front so the functionality of incrementally adding more and
more segments is no longer needed. This commit removes the ability to
add a function-at-a-time in `CodeMemory` and instead it can now only
load objects in their entirety. A small helper function is added to
build a small object file for trampolines in `Func::new` to handle
allocation there.
Finally, this commit also folds the `wasmtime-obj` crate directly into
the `wasmtime-cranelift` crate and its builder structure to be more
amenable to this strategy of managing unwinding tables.
It is not intentional to have any real functional change as a result of
this commit. This might accelerate loading a module from cache slightly
since less work is needed to manage the unwinding information, but
that's just a side benefit from the main goal of this commit which is to
remove the dependence on cranelift unwinding information being available
at runtime.
* Remove isa reexport from wasmtime-environ
* Trim down reexports of `cranelift-codegen`
Remove everything non-essential so that only the bits which will need to
be refactored out of cranelift remain.
* Fix debug tests
* Review comments
This commit started off by deleting the `cranelift_codegen::settings`
reexport in the `wasmtime-environ` crate and then basically played
whack-a-mole until everything compiled again. The main result of this is
that the `wasmtime-*` family of crates have generally less of a
dependency on the `TargetIsa` trait and type from Cranelift. While the
dependency isn't entirely severed yet this is at least a significant
start.
This commit is intended to be largely refactorings, no functional
changes are intended here. The refactorings are:
* A `CompilerBuilder` trait has been added to `wasmtime_environ` which
server as an abstraction used to create compilers and configure them
in a uniform fashion. The `wasmtime::Config` type now uses this
instead of cranelift-specific settings. The `wasmtime-jit` crate
exports the ability to create a compiler builder from a
`CompilationStrategy`, which only works for Cranelift right now. In a
cranelift-less build of Wasmtime this is expected to return a trait
object that fails all requests to compile.
* The `Compiler` trait in the `wasmtime_environ` crate has been souped
up with a number of methods that Wasmtime and other crates needed.
* The `wasmtime-debug` crate is now moved entirely behind the
`wasmtime-cranelift` crate.
* The `wasmtime-cranelift` crate is now only depended on by the
`wasmtime-jit` crate.
* Wasm types in `cranelift-wasm` no longer contain their IR type,
instead they only contain the `WasmType`. This is required to get
everything to align correctly but will also be required in a future
refactoring where the types used by `cranelift-wasm` will be extracted
to a separate crate.
* I moved around a fair bit of code in `wasmtime-cranelift`.
* Some gdb-specific jit-specific code has moved from `wasmtime-debug` to
`wasmtime-jit`.
* Move all trampoline compilation to `wasmtime-cranelift`
This commit moves compilation of all the trampolines used in wasmtime
behind the `Compiler` trait object to live in `wasmtime-cranelift`. The
long-term goal of this is to enable depending on cranelift *only* from
the `wasmtime-cranelift` crate, so by moving these dependencies we
should make that a little more flexible.
* Fix windows build
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
* Consolidate address calculations for atomics
This commit consolidates all calcuations of guest addresses into one
`prepare_addr` function. This notably remove the atomics-specifics paths
as well as the `prepare_load` function (now renamed to `prepare_addr`
and folded into `get_heap_addr`).
The goal of this commit is to simplify how addresses are managed in the
code generator for atomics to use all the shared infrastrucutre of other
loads/stores as well. This additionally fixes#3132 via the use of
`heap_addr` in clif for all operations.
I also added a number of tests for loads/stores with varying alignments.
Originally I was going to allow loads/stores to not be aligned since
that's what the current formal specification says, but the overview of
the threads proposal disagrees with the formal specification, so I
figured I'd leave it as-is but adding tests probably doesn't hurt.
Closes#3132
* Fix old backend
* Guarantee misalignment checks happen before out-of-bounds
* Bump the wasm-tools crates
Pulls in some updates here and there, mostly for updating crates to the
latest version to prepare for later memory64 work.
* Update lightbeam
* Change VMMemoryDefinition::current_length to `usize`
This commit changes the definition of
`VMMemoryDefinition::current_length` to `usize` from its previous
definition of `u32`. This is a pretty impactful change because it also
changes the cranelift semantics of "dynamic" heaps where the bound
global value specifier must now match the pointer type for the platform
rather than the index type for the heap.
The motivation for this change is that the `current_length` field (or
bound for the heap) is intended to reflect the current size of the heap.
This is bound by `usize` on the host platform rather than `u32` or`
u64`. The previous choice of `u32` couldn't represent a 4GB memory
because we couldn't put a number representing 4GB into the
`current_length` field. By using `usize`, which reflects the host's
memory allocation, this should better reflect the size of the heap and
allows Wasmtime to support a full 4GB heap for a wasm program (instead
of 4GB minus one page).
This commit also updates the legalization of the `heap_addr` clif
instruction to appropriately cast the address to the platform's pointer
type, handling bounds checks along the way. The practical impact for
today's targets is that a `uextend` is happening sooner than it happened
before, but otherwise there is no intended impact of this change. In the
future when 64-bit memories are supported there will likely need to be
fancier logic which handles offsets a bit differently (especially in the
case of a 64-bit memory on a 32-bit host).
The clif `filetest` changes should show the differences in codegen, and
the Wasmtime changes are largely removing casts here and there.
Closes#3022
* Add tests for memory.size at maximum memory size
* Add a dfg helper method
This incorrectly assumed that we had unparsed dwarf information,
regardless of custom section name. This commit updates the logic to
calculate that by first checking the section name before we set the flag
indicating that there's unparsed debuginfo.
* Add a type parameter to `VMOffsets` for pointer size
This commit adds a type parameter to `VMOffsets` representing the
pointer size to improve computations in `wasmtime-runtime` which always
use a constant value of the host's pointer size. The type parameter is
`u8` for `wasmtime-cranelift`'s use case where cross-compilation may be
involved.
* fix lightbeam
This commit slims down the list of builtin intrinsics. It removes the
duplicated intrinsics for imported and locally defined items, instead
always using one intrinsic for both. This was previously inconsistently
applied where some intrinsics got two copies (one for imported one for
local) and other intrinsics got only one copy. This does add an extra
branch in intrinsics since they need to determine whether something is
local or not, but that's generally much lower cost than the intrinsics
themselves.
This also removes the `memory32_size` intrinsic, instead inlining the
codegen directly into the clif IR. This matches what the `table.size`
instruction does and removes the need for a few functions on a
`wasmtime_runtime::Instance`.
* Add guard pages to the front of linear memories
This commit implements a safety feature for Wasmtime to place guard
pages before the allocation of all linear memories. Guard pages placed
after linear memories are typically present for performance (at least)
because it can help elide bounds checks. Guard pages before a linear
memory, however, are never strictly needed for performance or features.
The intention of a preceding guard page is to help insulate against bugs
in Cranelift or other code generators, such as CVE-2021-32629.
This commit adds a `Config::guard_before_linear_memory` configuration
option, defaulting to `true`, which indicates whether guard pages should
be present both before linear memories as well as afterwards. Guard
regions continue to be controlled by
`{static,dynamic}_memory_guard_size` methods.
The implementation here affects both on-demand allocated memories as
well as the pooling allocator for memories. For on-demand memories this
adjusts the size of the allocation as well as adjusts the calculations
for the base pointer of the wasm memory. For the pooling allocator this
will place a singular extra guard region at the very start of the
allocation for memories. Since linear memories in the pooling allocator
are contiguous every memory already had a preceding guard region in
memory, it was just the previous memory's guard region afterwards. Only
the first memory needed this extra guard.
I've attempted to write some tests to help test all this, but this is
all somewhat tricky to test because the settings are pretty far away
from the actual behavior. I think, though, that the tests added here
should help cover various use cases and help us have confidence in
tweaking the various `Config` settings beyond their defaults.
Note that this also contains a semantic change where
`InstanceLimits::memory_reservation_size` has been removed. Instead this
field is now inferred from the `static_memory_maximum_size` and guard
size settings. This should hopefully remove some duplication in these
settings, canonicalizing on the guard-size/static-size settings as the
way to control memory sizes and virtual reservations.
* Update config docs
* Fix a typo
* Fix benchmark
* Fix wasmtime-runtime tests
* Fix some more tests
* Try to fix uffd failing test
* Review items
* Tweak 32-bit defaults
Makes the pooling allocator a bit more reasonable by default on 32-bit
with these settings.
Implement Wasmtime's new API as designed by RFC 11. This is quite a large commit which has had lots of discussion externally, so for more information it's best to read the RFC thread and the PR thread.
* Upgrade to the latest versions of gimli, addr2line, object
And adapt to API changes. New gimli supports wasm dwarf, resulting in
some simplifications in the debug crate.
* upgrade gimli usage in linux-specific profiling too
* Add "continue" statement after interpreting a wasm local dwarf opcode
This fixes some hard-coded assumptions in the debug crate that
the native ELF files being accessed are little-endian; specifically
in create_gdbjit_image as well as in emit_dwarf.
In addition, data in WebAssembly memory always uses little-endian
byte order. Therefore, if the native architecture is big-endian,
all references to base types need to be marked as little-endian
using the DW_AT_endianity attribute, so that the debugger will
be able to correctly access them.
Now that we're using "possibly exported" as an impactful decision for
codegen (which trampolines to generate and which ABI a function has)
it's important that we calculate this property of a wasm function
correctly! Previously Wasmtime forgot to processed "declared" elements
in apart from active/passive element segments, but this updates Wasmtime
to ensure that these entries are processed and all the functions
contained within are flagged as "possibly exported".
Closes#2850
* Optimize `table.init` instruction and instantiation
This commit optimizes table initialization as part of instance
instantiation and also applies the same optimization to the `table.init`
instruction. One part of this commit is to remove some preexisting
duplication between instance instantiation and the `table.init`
instruction itself, after this the actual implementation of `table.init`
is optimized to effectively have fewer bounds checks in fewer places and
have a much tighter loop for instantiation.
A big fallout from this change is that memory/table initializer offsets
are now stored as `u32` instead of `usize` to remove a few casts in a
few places. This ended up requiring moving some overflow checks that
happened in parsing to later in code itself because otherwise the wrong
spec test errors are emitted during testing. I've tried to trace where
these can possibly overflow but I think that I managed to get
everything.
In a local synthetic test where an empty module with a single 80,000
element initializer this improves total instantiation time by 4x (562us
=> 141us)
* Review comments
This commit uses a two-phase lookup of stack map information from modules
rather than giving back raw pointers to stack maps.
First the runtime looks up information about a module from a pc value, which
returns an `Arc` it keeps a reference on while completing the stack map lookup.
Second it then queries the module information for the stack map from a pc
value, getting a reference to the stack map (which is now safe because of the
`Arc` held by the runtime).
This commit removes the stack map registry and instead uses the existing
information from the store's module registry to lookup stack maps.
A trait is now used to pass the lookup context to the runtime, implemented by
`Store` to do the lookup.
With this change, module registration in `Store` is now entirely limited to
inserting the module into the module registry.
This commit updates the implementation of `VMOffsets` to frontload all
checked arithmetic on construction of the `VMOffsets` which allows
eliding all checked arithmetic when accessing the fields of `VMOffsets`.
For testing and such this adds a new constructor as well from a new
`VMOffsetsFields` structure which is a clone of the old definition.
This should help speed up some profile hot spots I've been seeing where
with all the checked arithmetic on field sizes this was slowing down the
various accessors during instantiation (which uses `VMOffsets` to
initialize various fields of the `VMContext`).
Looking at some profiles these or their related functions were all
showing up, so this commit adds `#[inline]` to allow cross-crate
inlining by default.
Otherwise they won't get inlined across crates unless we enable LTO, and much of
the usage of these function is across crates (eg from the `wasmtime-runtime`
crate).
* Fully support multiple returns in Wasmtime
For quite some time now Wasmtime has "supported" multiple return values,
but only in the mose bare bones ways. Up until recently you couldn't get
a typed version of functions with multiple return values, and never have
you been able to use `Func::wrap` with functions that return multiple
values. Even recently where `Func::typed` can call functions that return
multiple values it uses a double-indirection by calling a trampoline
which calls the real function.
The underlying reason for this lack of support is that cranelift's ABI
for returning multiple values is not possible to write in Rust. For
example if a wasm function returns two `i32` values there is no Rust (or
C!) function you can write to correspond to that. This commit, however
fixes that.
This commit adds two new ABIs to Cranelift: `WasmtimeSystemV` and
`WasmtimeFastcall`. The intention is that these Wasmtime-specific ABIs
match their corresponding ABI (e.g. `SystemV` or `WindowsFastcall`) for
everything *except* how multiple values are returned. For multiple
return values we simply define our own version of the ABI which Wasmtime
implements, which is that for N return values the first is returned as
if the function only returned that and the latter N-1 return values are
returned via an out-ptr that's the last parameter to the function.
These custom ABIs provides the ability for Wasmtime to bind these in
Rust meaning that `Func::wrap` can now wrap functions that return
multiple values and `Func::typed` no longer uses trampolines when
calling functions that return multiple values. Although there's lots of
internal changes there's no actual changes in the API surface area of
Wasmtime, just a few more impls of more public traits which means that
more types are supported in more places!
Another change made with this PR is a consolidation of how the ABI of
each function in a wasm module is selected. The native `SystemV` ABI,
for example, is more efficient at returning multiple values than the
wasmtime version of the ABI (since more things are in more registers).
To continue to take advantage of this Wasmtime will now classify some
functions in a wasm module with the "fast" ABI. Only functions that are
not reachable externally from the module are classified with the fast
ABI (e.g. those not exported, used in tables, or used with `ref.func`).
This should enable purely internal functions of modules to have a faster
calling convention than those which might be exposed to Wasmtime itself.
Closes#1178
* Tweak some names and add docs
* "fix" lightbeam compile
* Fix TODO with dummy environ
* Unwind info is a property of the target, not the ABI
* Remove lightbeam unused imports
* Attempt to fix arm64
* Document new ABIs aren't stable
* Fix filetests to use the right target
* Don't always do 64-bit stores with cranelift
This was overwriting upper bits when 32-bit registers were being stored
into return values, so fix the code inline to do a sized store instead
of one-size-fits-all store.
* At least get tests passing on the old backend
* Fix a typo
* Add some filetests with mixed abi calls
* Get `multi` example working
* Fix doctests on old x86 backend
* Add a mixture of wasmtime/system_v tests
This commit changes how both the shared flags and ISA flags are stored in the
serialized module to detect incompatibilities when a serialized module is
instantiated.
It improves the error reporting when a compiled module has mismatched shared
flags.
This commit adds the `wasmtime settings` command to print out available
Cranelift settings for a target (defaults to the host).
The compile command has been updated to remove the Cranelift ISA options in
favor of encouraging users to use `wasmtime settings` to discover what settings
are available. This will reduce the maintenance cost for syncing the compile
command with Cranelift ISA flags.
This commit adds a `compile` command to the Wasmtime CLI.
The command can be used to Ahead-Of-Time (AOT) compile WebAssembly modules.
With the `all-arch` feature enabled, AOT compilation can be performed for
non-native architectures (i.e. cross-compilation).
The `Module::compile` method has been added to perform AOT compilation.
A few of the CLI flags relating to "on by default" Wasm features have been
changed to be "--disable-XYZ" flags.
A simple example of using the `wasmtime compile` command:
```text
$ wasmtime compile input.wasm
$ wasmtime input.cwasm
```
Currently wasmtime will generate a `SignatureIndex`-per-type in the
module itself, even if the module itself declares the same type multiple
times. To make matters worse if the same type is declared across
multiple modules used in a module-linking-using-module then the
signature will be recorded each time it's declared.
This commit adds a simple map to module translation to deduplicate these
function types. This should improve the performance of module-linking
graphs where the same function type may be declared in a number of
modules. For modules that don't use module linking this adds an extra
map that's not used too often, but the time spent managing it should be
dwarfed by other compile tasks.
* Add `anyhow` dependency to `wasmtime-runtime`.
* Revert `get_data` back to `fn`.
* Remove `DataInitializer` and box the data in `Module` translation instead.
* Improve comments on `MemoryInitialization`.
* Remove `MemoryInitialization::OutOfBounds` in favor of proper bulk memory
semantics.
* Use segmented memory initialization except for when the uffd feature is
enabled on Linux.
* Validate modules with the allocator after translation.
* Updated various functions in the runtime to return `anyhow::Result`.
* Use a slice when copying pages instead of `ptr::copy_nonoverlapping`.
* Remove unnecessary casts in `OnDemandAllocator::deallocate`.
* Better document the `uffd` feature.
* Use WebAssembly page-sized pages in the paged initialization.
* Remove the stack pool from the uffd handler and simply protect just the guard
pages.
Last minute code clean up to fix some comments and rename `address_space_size`
to `memory_reservation_size` to better describe what the option is doing.
This commit implements copying paged initialization data upon a fault of a
linear memory page.
If the initialization data is "paged", then the appropriate pages are copied
into the Wasm page (or zeroed if the page is not present in the
initialization data).
If the initialization data is not "paged", the Wasm page is zeroed so that
module instantiation can initialize the pages.
This commit implements the pooling instance allocator.
The allocation strategy can be set with `Config::with_allocation_strategy`.
The pooling strategy uses the pooling instance allocator to preallocate a
contiguous region of memory for instantiating modules that adhere to various
limits.
The intention of the pooling instance allocator is to reserve as much of the
host address space needed for instantiating modules ahead of time and to reuse
committed memory pages wherever possible.
With the change to artificially limit unbounded memories based on Tunables,
it's possible to hit the assert where the minimum might exceed the static
memory bound.
This commit removes the assert in favor of a check to see if the minimum also
fits within the static memory bound. It also corrects the maximum bounding to
ensure the minimum between the memory's maximum and the configured maximum is
used.
If it does not fit, the memory will be treated as dynamic. In the case of the
pooling instance allocator, the bounds will be checked again during translation
and an appropriate error will be returned as dynamic memories are not supported
for that allocator.
This commit introduces two new methods on `InstanceAllocator`:
* `validate_module` - this method is used to validate a module after
translation but before compilation. It will be used for the upcoming pooling
allocator to ensure a module being compiled adheres to the limits of the
allocator.
* `adjust_tunables` - this method is used to adjust the `Tunables` given the
JIT compiler. The pooling allocator will use this to force all memories to
be static during compilation.
This commit refactors module instantiation in the runtime to allow for
different instance allocation strategy implementations.
It adds an `InstanceAllocator` trait with the current implementation put behind
the `OnDemandInstanceAllocator` struct.
The Wasmtime API has been updated to allow a `Config` to have an instance
allocation strategy set which will determine how instances get allocated.
This change is in preparation for an alternative *pooling* instance allocator
that can reserve all needed host process address space in advance.
This commit also makes changes to the `wasmtime_environ` crate to represent
compiled modules in a way that reduces copying at instantiation time.
* Consume fuel during function execution
This commit adds codegen infrastructure necessary to instrument wasm
code to consume fuel as it executes. Currently nothing is really done
with the fuel, but that'll come in later commits.
The focus of this commit is to implement the codegen infrastructure
necessary to consume fuel and account for fuel consumed correctly.
* Periodically check remaining fuel in wasm JIT code
This commit enables wasm code to periodically check to see if fuel has
run out. When fuel runs out an intrinsic is called which can do what it
needs to do in the result of fuel running out. For now a trap is thrown
to have at least some semantics in synchronous stores, but another
planned use for this feature is for asynchronous stores to periodically
yield back to the host based on fuel running out.
Checks for remaining fuel happen in the same locations as interrupt
checks, which is to say the start of the function as well as loop
headers.
* Improve codegen by caching `*const VMInterrupts`
The location of the shared interrupt value and fuel value is through a
double-indirection on the vmctx (load through the vmctx and then load
through that pointer). The second pointer in this chain, however, never
changes, so we can alter codegen to account for this and remove some
extraneous load instructions and hopefully reduce some register
pressure even maybe.
* Add tests fuel can abort infinite loops
* More fuzzing with fuel
Use fuel to time out modules in addition to time, using fuzz input to
figure out which.
* Update docs on trapping instructions
* Fix doc links
* Fix a fuzz test
* Change setting fuel to adding fuel
* Fix a doc link
* Squelch some rustdoc warnings
This PR propagates "value labels" all the way from CLIF to DWARF
metadata on the emitted machine code. The key idea is as follows:
- Translate value-label metadata on the input into "value_label"
pseudo-instructions when lowering into VCode. These
pseudo-instructions take a register as input, denote a value label,
and semantically are like a "move into value label" -- i.e., they
update the current value (as seen by debugging tools) of the given
local. These pseudo-instructions emit no machine code.
- Perform a dataflow analysis *at the machine-code level*, tracking
value-labels that propagate into registers and into [SP+constant]
stack storage. This is a forward dataflow fixpoint analysis where each
storage location can contain a *set* of value labels, and each value
label can reside in a *set* of storage locations. (Meet function is
pairwise intersection by storage location.)
This analysis traces value labels symbolically through loads and
stores and reg-to-reg moves, so it will naturally handle spills and
reloads without knowing anything special about them.
- When this analysis converges, we have, at each machine-code offset, a
mapping from value labels to some number of storage locations; for
each offset for each label, we choose the best location (prefer
registers). Note that we can choose any location, as the symbolic
dataflow analysis is sound and guarantees that the value at the
value_label instruction propagates to all of the named locations.
- Then we can convert this mapping into a format that the DWARF
generation code (wasmtime's debug crate) can use.
This PR also adds the new-backend variant to the gdb tests on CI.
This commit fully implements outer aliases of the module linking
proposal. Outer aliases can now handle multiple-level-up aliases and now
properly also handle closed-over-values of modules that are either
imported or defined.
The structure of `wasmtime::Module` was altered as part of this commit.
It is now a compiled module plus two lists of "upvars", or closed over
values used when instantiating the module. One list of upvars is
compiled artifacts which are submodules that could be used. Another is
module values that are injected via outer aliases. Serialization and
such have been updated as appropriate to handle this.
This commit updates the various tooling used by wasmtime which has new
updates to the module linking proposal. This is done primarily to sync
with WebAssembly/module-linking#26. The main change implemented here is
that wasmtime now supports creating instances from a set of values, nott
just from instantiating a module. Additionally subtyping handling of
modules with respect to imports is now properly handled by desugaring
two-level imports to imports of instances.
A number of small refactorings are included here as well, but most of
them are in accordance with the changes to `wasmparser` and the updated
binary format for module linking.
This method attempted to reserve space in the `results` list of final
modules. Unfortunately `results.reserve(nmodules)` isn't enough here
because this can be called many times before a module is actually
finished and pushed onto the vector. The attempted logic to work around
this was buggy, however, and would simply trigger geometric growth on
every single reservation because it erroneously assumed that a
reservation would be exactly met.
This is fixed by avoiding looking at the vector's capacity and instead
keeping track of modules-to-be in a side field. This is the incremented
and passed to `reserve` as it represents the number of modules that will
eventually make their way into the result vector.
* Implement imported/exported modules/instances
This commit implements the final piece of the module linking proposal
which is to flesh out the support for importing/exporting instances and
modules. This ended up having a few changes:
* Two more `PrimaryMap` instances are now stored in an `Instance`. The value
for instances is `InstanceHandle` (pretty easy) and for modules it's
`Box<dyn Any>` (less easy).
* The custom host state for `InstanceHandle` for `wasmtime` is now
`Arc<TypeTables` to be able to fully reconstruct an instance's types
just from its instance.
* Type matching for imports now has been updated to take
instances/modules into account.
One of the main downsides of this implementation is that type matching
of imports is duplicated between wasmparser and wasmtime, leading to
posssible bugs especially in the subtelties of module linking. I'm not
sure how best to unify these two pieces of validation, however, and it
may be more trouble than it's worth.
cc #2094
* Update wat/wast/wasmparser
* Review comments
* Fix a bug in publish script to vendor the right witx
Currently there's two witx binaries in our repository given the two wasi
spec submodules, so this updates the publication script to vendor the
right one.
This commit is intended to do almost everything necessary for processing
the alias section of module linking. Most of this is internal
refactoring, the highlights being:
* Type contents are now stored separately from a `wasmtime_env::Module`.
Given that modules can freely alias types and have them used all over
the place, it seemed best to have one canonical location to type
storage which everywhere else points to (with indices). A new
`TypeTables` structure is produced during compilation which is shared
amongst all member modules in a wasm blob.
* Instantiation is heavily refactored to account for module linking. The
main gotcha here is that imports are now listed as "initializers". We
have a sort of pseudo-bytecode-interpreter which interprets the
initialization of a module. This is more complicated than just
matching imports at this point because in the module linking proposal
the module, alias, import, and instance sections may all be
interleaved. This means that imports aren't guaranteed to show up at
the beginning of the address space for modules/instances.
Otherwise most of the changes here largely fell out from these two
design points. Aliases are recorded as initializers in this scheme.
Copying around type information and/or just knowing type information
during compilation is also pretty easy since everything is just a
pointer into a `TypeTables` and we don't have to actually copy any types
themselves. Lots of various refactorings were necessary to accomodate
these changes.
Tests are hoped to cover a breadth of functionality here, but not
necessarily a depth. There's still one more piece of the module linking
proposal missing which is exporting instances/modules, which will come
in a future PR.
It's also worth nothing that there's one large TODO which isn't
implemented in this change that I plan on opening an issue for.
With module linking when a set of modules comes back from compilation
each modules has all the trampolines for the entire set of modules. This
is quite a lot of duplicate trampolines across module-linking modules.
We'll want to refactor this at some point to instead have only one set
of trampolines per set of module linking modules and have them shared
from there. I figured it was best to separate out this change, however,
since it's purely related to resource usage, and doesn't impact
non-module-linking modules at all.
cc #2094
* Provide filename/line number information in `Trap`
This commit extends the `Trap` type and `Store` to retain DWARF debug
information found in a wasm file unconditionally, if it's present. This
then enables us to print filenames and line numbers which point back to
actual source code when a trap backtrace is printed. Additionally the
`FrameInfo` type has been souped up to return filename/line number
information as well.
The implementation here is pretty simplistic currently. The meat of all
the work happens in `gimli` and `addr2line`, and otherwise wasmtime is
just schlepping around bytes of dwarf debuginfo here and there!
The general goal here is to assist with debugging when using wasmtime
because filenames and line numbers are generally orders of magnitude
better even when you already have a stack trace. Another nicety here is
that backtraces will display inlined frames (learned through debug
information), improving the experience in release mode as well.
An example of this is that with this file:
```rust
fn main() {
panic!("hello");
}
```
we get this stack trace:
```
$ rustc foo.rs --target wasm32-wasi -g
$ cargo run foo.wasm
Finished dev [unoptimized + debuginfo] target(s) in 0.16s
Running `target/debug/wasmtime foo.wasm`
thread 'main' panicked at 'hello', foo.rs:2:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Error: failed to run main module `foo.wasm`
Caused by:
0: failed to invoke command default
1: wasm trap: unreachable
wasm backtrace:
0: 0x6c1c - panic_abort::__rust_start_panic::abort::h2d60298621b1ccbf
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:77:17
- __rust_start_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/panic_abort/src/lib.rs:32:5
1: 0x68c7 - rust_panic
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:626:9
2: 0x65a1 - std::panicking::rust_panic_with_hook::h2345fb0909b53e12
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:596:5
3: 0x1436 - std::panicking::begin_panic::{{closure}}::h106f151a6db8c8fb
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:506:9
4: 0xda8 - std::sys_common::backtrace::__rust_end_short_backtrace::he55aa13f22782798
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:153:18
5: 0x1324 - std::panicking::begin_panic::h1727e7d1d719c76f
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:505:12
6: 0xfde - foo::main::h2db1313a64510850
at /Users/acrichton/code/wasmtime/foo.rs:2:5
7: 0x11d5 - core::ops::function::FnOnce::call_once::h20ee1cc04aeff1fc
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:227:5
8: 0xddf - std::sys_common::backtrace::__rust_begin_short_backtrace::h054493e41e27e69c
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/sys_common/backtrace.rs:137:18
9: 0x1d5a - std::rt::lang_start::{{closure}}::hd83784448d3fcb42
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:66:18
10: 0x69d8 - core::ops::function::impls::<impl core::ops::function::FnOnce<A> for &F>::call_once::h564d3dad35014917
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/core/src/ops/function.rs:259:13
- std::panicking::try::do_call::hdca4832ace5a8603
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:381:40
- std::panicking::try::ha8624a1a6854b456
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panicking.rs:345:19
- std::panic::catch_unwind::h71421f57cf2bc688
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/panic.rs:382:14
- std::rt::lang_start_internal::h260050c92cd470af
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:51:25
11: 0x1d0c - std::rt::lang_start::h0b4bcf3c5e498224
at /rustc/7eac88abb2e57e752f3302f02be5f3ce3d7adfb4/library/std/src/rt.rs:65:5
12: 0xffc - <unknown>!__original_main
13: 0x393 - __muloti4
at /cargo/registry/src/github.com-1ecc6299db9ec823/compiler_builtins-0.1.35/src/macros.rs:269
```
This is relatively noisy by default but there's filenames and line
numbers! Additionally frame 10 can be seen to have lots of frames
inlined into it. All information is always available to the embedder but
we could try to handle the `__rust_begin_short_backtrace` and
`__rust_end_short_backtrace` markers to trim the backtrace by default as
well.
The only gotcha here is that it looks like `__muloti4` is out of place.
That's because the libc that Rust ships with doesn't have dwarf
information, although I'm not sure why we land in that function for
symbolizing it...
* Add a configuration switch for debuginfo
* Control debuginfo by default with `WASM_BACKTRACE_DETAILS`
* Try cpp_demangle on demangling as well
* Rename to WASMTIME_BACKTRACE_DETAILS
This commit implements the interpretation necessary of the instance
section of the module linking proposal. Instantiating a module which
itself has nested instantiated instances will now instantiate the nested
instances properly. This isn't all that useful without the ability to
alias exports off the result, but we can at least observe the side
effects of instantiation through the `start` function.
cc #2094
With the module linking proposal the field name on imports is now
optional, and only the module is required to be specified. This commit
propagates this API change to the boundary of wasmtime's API, ensuring
consumers are aware of what's optional with module linking and what
isn't. Note that it's expected that all existing users will either
update accordingly or unwrap the result since module linking is
presumably disabled.
