The tests for the SIMD floating-point maximum and minimum operations
require particular care because the handling of the NaN values is
non-deterministic and may vary between platforms. There is no way to
match several NaN values in a test, so the solution is to extract the
non-deterministic test cases into a separate file that is subsequently
replicated for every backend under test, with adjustments made to the
expected results.
Copyright (c) 2021, Arm Limited.
PR #3131 fixed the failing builds by allowing this field to be dead.
After looking at it further the field is not being used and can be
removedi completely.
One of the fields of `TargetIsa` isn't used in the
cranelift-codegen-meta crate, but instead of refactoring to try to
remove it this just adds `#[allow(dead_code)]` for now in the assumption
that when the old backends go away this will probably go away as well.
Also, reorganize the AArch64-specific VCode instructions for unary
narrowing and widening vector operations, so that they are more
straightforward to use.
Copyright (c) 2021, Arm Limited.
* Add support for processor features (including auto-detection).
* Move base architecture set requirement back to z14.
* Add z15 feature sets and re-enable z15-specific code generation
when required features are available.
* Add support for x64 packed promote low
* Add support for x64 packed floating point demote
* Update vector promote low and demote by adding constraints
Also does some renaming and minor refactoring
When shuffling values from two different registers, the x64 lowering for
`i8x16.shuffle` must first shuffle each register separately and then OR
the results with SSE instructions. With `VPERMI2B`, available in
AVX512VL + AVX512VBMI, this can be done in a single instruction after
the shuffle mask has been moved into the destination register. This
change uses `VPERMI2B` for that case when the CPU supports it.
When AVX512VL or AVX512BITALG are available, Wasm SIMD's `popcnt`
instruction can be lowered to a single x64 instruction, `VPOPCNTB`,
instead of 8+ instructions.
This adds support for the IBM z/Architecture (s390x-ibm-linux).
The status of the s390x backend in its current form is:
- Wasmtime is fully functional and passes all tests on s390x.
- All back-end features supported, with the exception of SIMD.
- There is still a lot of potential for performance improvements.
- Currently the only supported processor type is z15.
This commit changes how both the shared flags and ISA flags are stored in the
serialized module to detect incompatibilities when a serialized module is
instantiated.
It improves the error reporting when a compiled module has mismatched shared
flags.
This commit adds the `wasmtime settings` command to print out available
Cranelift settings for a target (defaults to the host).
The compile command has been updated to remove the Cranelift ISA options in
favor of encouraging users to use `wasmtime settings` to discover what settings
are available. This will reduce the maintenance cost for syncing the compile
command with Cranelift ISA flags.
This commit adds a `compile` command to the Wasmtime CLI.
The command can be used to Ahead-Of-Time (AOT) compile WebAssembly modules.
With the `all-arch` feature enabled, AOT compilation can be performed for
non-native architectures (i.e. cross-compilation).
The `Module::compile` method has been added to perform AOT compilation.
A few of the CLI flags relating to "on by default" Wasm features have been
changed to be "--disable-XYZ" flags.
A simple example of using the `wasmtime compile` command:
```text
$ wasmtime compile input.wasm
$ wasmtime input.cwasm
```
* Use stable Rust on CI to test the x64 backend
This commit leverages the newly-released 1.51.0 compiler to test the
new backend on Windows and Linux with a stable compiler instead of a
nightly compiler. This isolates the nightly build to just the nightly
documentation generation and fuzzing, both of which rely on nightly for
the best results right now.
* Use updated stable in book build job
* Run rustfmt for new stable
* Silence new warnings for wasi-nn
* Allow some dead code in the x64 backend
Looks like new rustc is better about emitting some dead-code warnings
* Update rust in peepmatic job
* Fix a test in the pooling allocator
* Remove `package.metdata.docs.rs` temporarily
Needs resolution of https://github.com/rust-lang/cargo/pull/9300 first
* Fix a warning in a wasi-nn example
This bumps target-lexicon and adds support for the AppleAarch64 calling
convention. Specifically for WebAssembly support, we only have to worry
about the new stack slots convention. Stack slots don't need to be at
least 8-bytes, they can be as small as the data type's size. For
instance, if we need stack slots for (i32, i32), they can be located at
offsets (+0, +4). Note that they still need to be properly aligned on
the data type they're containing, though, so if we need stack slots for
(i32, i64), we can't start the i64 slot at the +4 offset (it must start
at the +8 offset).
Added one test that was failing on the Mac M1, as well as other tests
stressing different yet similar situations.
This commit enables Cranelift's AArch64 backend to generate code
for instruction set extensions (previously only the base Armv8-A
architecture was supported); also, it makes it possible to detect
the extensions supported by the host when JIT compiling. The new
functionality is applied to the IR instruction `AtomicCas`.
Copyright (c) 2021, Arm Limited.
Our previous implementation of unwind infrastructure was somewhat
complex and brittle: it parsed generated instructions in order to
reverse-engineer unwind info from prologues. It also relied on some
fragile linkage to communicate instruction-layout information that VCode
was not designed to provide.
A much simpler, more reliable, and easier-to-reason-about approach is to
embed unwind directives as pseudo-instructions in the prologue as we
generate it. That way, we can say what we mean and just emit it
directly.
The usual reasoning that leads to the reverse-engineering approach is
that metadata is hard to keep in sync across optimization passes; but
here, (i) prologues are generated at the very end of the pipeline, and
(ii) if we ever do a post-prologue-gen optimization, we can treat unwind
directives as black boxes with unknown side-effects, just as we do for
some other pseudo-instructions today.
It turns out that it was easier to just build this for both x64 and
aarch64 (since they share a factored-out ABI implementation), and wire
up the platform-specific unwind-info generation for Windows and SystemV.
Now we have simpler unwind on all platforms and we can delete the old
unwind infra as soon as we remove the old backend.
There were a few consequences to supporting Fastcall unwind in
particular that led to a refactor of the common ABI. Windows only
supports naming clobbered-register save locations within 240 bytes of
the frame-pointer register, whatever one chooses that to be (RSP or
RBP). We had previously saved clobbers below the fixed frame (and below
nominal-SP). The 240-byte range has to include the old RBP too, so we're
forced to place clobbers at the top of the frame, just below saved
RBP/RIP. This is fine; we always keep a frame pointer anyway because we
use it to refer to stack args. It does mean that offsets of fixed-frame
slots (spillslots, stackslots) from RBP are no longer known before we do
regalloc, so if we ever want to index these off of RBP rather than
nominal-SP because we add support for `alloca` (dynamic frame growth),
then we'll need a "nominal-BP" mode that is resolved after regalloc and
clobber-save code is generated. I added a comment to this effect in
`abi_impl.rs`.
The above refactor touched both x64 and aarch64 because of shared code.
This had a further effect in that the old aarch64 prologue generation
subtracted from `sp` once to allocate space, then used stores to `[sp,
offset]` to save clobbers. Unfortunately the offset only has 7-bit
range, so if there are enough clobbered registers (and there can be --
aarch64 has 384 bytes of registers; at least one unit test hits this)
the stores/loads will be out-of-range. I really don't want to synthesize
large-offset sequences here; better to go back to the simpler
pre-index/post-index `stp r1, r2, [sp, #-16]` form that works just like
a "push". It's likely not much worse microarchitecturally (dependence
chain on SP, but oh well) and it actually saves an instruction if
there's no other frame to allocate. As a further advantage, it's much
simpler to understand; simpler is usually better.
This PR adds the new backend on Windows to CI as well.
This adds support for the "fastcall" ABI, which is the native C/C++ ABI
on Windows platforms on x86-64. It is similar to but not exactly like
System V; primarily, its argument register assignments are different,
and it requires stack shadow space.
Note that this also adjusts the handling of multi-register values in the
shared ABI implementation, and with this change, adjusts handling of
`i128`s on *both* Fastcall/x64 *and* SysV/x64 platforms. This was done
to align with actual behavior by the "rustc ABI" on both platforms, as
mapped out experimentally (Compiler Explorer link in comments). This
behavior is gated under the `enable_llvm_abi_extensions` flag.
Note also that this does *not* add x64 unwind info on Windows. That will
come in a future PR (but is planned!).
With `Module::{serialize,deserialize}` it should be possible to share
wasmtime modules across machines or CPUs. Serialization, however, embeds
a hash of all configuration values, including cranelift compilation
settings. By default wasmtime's selection of the native ISA would enable
ISA flags according to CPU features available on the host, but the same
CPU features may not be available across two machines.
This commit adds a `Config::cranelift_clear_cpu_flags` method which
allows clearing the target-specific ISA flags that are automatically
inferred by default for the native CPU. Options can then be
incrementally built back up as-desired with teh `cranelift_other_flag`
method.
This was added as an incremental step to improve AArch64 code quality in
PR #2278. At the time, we did not have a way to pattern-match the load +
splat opcode sequence that the relevant Wasm opcodes lowered to.
However, now with PR #2366, we can merge effectful instructions such as
loads into other ops, and so we can do this pattern matching directly.
The pattern-matching update will come in a subsequent commit.
