In particular, introduce initial support for the MOVI and MVNI
instructions, with 8-bit elements. Also, treat vector constants
as 32- or 64-bit floating-point numbers, if their value allows
it, by relying on the architectural zero extension. Finally,
stop generating literal loads for 32-bit constants.
Copyright (c) 2020, Arm Limited.
This PR updates the AArch64 ABI implementation so that it (i) properly
respects that v8-v15 inclusive have callee-save lower halves, and
caller-save upper halves, by conservatively approximating (to full
registers) in the appropriate directions when generating prologue
caller-saves and when informing the regalloc of clobbered regs across
callsites.
In order to prevent saving all of these vector registers in the prologue
of every non-leaf function due to the above approximation, this also
makes use of a new regalloc.rs feature to exclude call instructions'
writes from the clobber set returned by register allocation. This is
safe whenever the caller and callee have the same ABI (because anything
the callee could clobber, the caller is allowed to clobber as well
without saving it in the prologue).
Fixes#2254.
The implementation is pretty straightforward. Wasm atomic instructions fall
into 5 groups
* atomic read-modify-write
* atomic compare-and-swap
* atomic loads
* atomic stores
* fences
and the implementation mirrors that structure, at both the CLIF and AArch64
levels.
At the CLIF level, there are five new instructions, one for each group. Some
comments about these:
* for those that take addresses (all except fences), the address is contained
entirely in a single `Value`; there is no offset field as there is with
normal loads and stores. Wasm atomics require alignment checks, and
removing the offset makes implementation of those checks a bit simpler.
* atomic loads and stores get their own instructions, rather than reusing the
existing load and store instructions, for two reasons:
- per above comment, makes alignment checking simpler
- reuse of existing loads and stores would require extension of `MemFlags`
to indicate atomicity, which sounds semantically unclean. For example,
then *any* instruction carrying `MemFlags` could be marked as atomic, even
in cases where it is meaningless or ambiguous.
* I tried to specify, in comments, the behaviour of these instructions as
tightly as I could. Unfortunately there is no way (per my limited CLIF
knowledge) to enforce the constraint that they may only be used on I8, I16,
I32 and I64 types, and in particular not on floating point or vector types.
The translation from Wasm to CLIF, in `code_translator.rs` is unremarkable.
At the AArch64 level, there are also five new instructions, one for each
group. All of them except `::Fence` contain multiple real machine
instructions. Atomic r-m-w and atomic c-a-s are emitted as the usual
load-linked store-conditional loops, guarded at both ends by memory fences.
Atomic loads and stores are emitted as a load preceded by a fence, and a store
followed by a fence, respectively. The amount of fencing may be overkill, but
it reflects exactly what the SM Wasm baseline compiler for AArch64 does.
One reason to implement r-m-w and c-a-s as a single insn which is expanded
only at emission time is that we must be very careful what instructions we
allow in between the load-linked and store-conditional. In particular, we
cannot allow *any* extra memory transactions in there, since -- particularly
on low-end hardware -- that might cause the transaction to fail, hence
deadlocking the generated code. That implies that we can't present the LL/SC
loop to the register allocator as its constituent instructions, since it might
insert spills anywhere. Hence we must present it as a single indivisible
unit, as we do here. It also has the benefit of reducing the total amount of
work the RA has to do.
The only other notable feature of the r-m-w and c-a-s translations into
AArch64 code, is that they both need a scratch register internally. Rather
than faking one up by claiming, in `get_regs` that it modifies an extra
scratch register, and having to have a dummy initialisation of it, these new
instructions (`::LLSC` and `::CAS`) simply use fixed registers in the range
x24-x28. We rely on the RA's ability to coalesce V<-->R copies to make the
cost of the resulting extra copies zero or almost zero. x24-x28 are chosen so
as to be call-clobbered, hence their use is less likely to interfere with long
live ranges that span calls.
One subtlety regarding the use of completely fixed input and output registers
is that we must be careful how the surrounding copy from/to of the arg/result
registers is done. In particular, it is not safe to simply emit copies in
some arbitrary order if one of the arg registers is a real reg. For that
reason, the arguments are first moved into virtual regs if they are not
already there, using a new method `<LowerCtx for Lower>::ensure_in_vreg`.
Again, we rely on coalescing to turn them into no-ops in the common case.
There is also a ridealong fix for the AArch64 lowering case for
`Opcode::Trapif | Opcode::Trapff`, which removes a bug in which two trap insns
in a row were generated.
In the patch as submitted there are 6 "FIXME JRS" comments, which mark things
which I believe to be correct, but for which I would appreciate a second
opinion. Unless otherwise directed, I will remove them for the final commit
but leave the associated code/comments unchanged.
The main issue with the InstSize enum was that it was used both for
GPR and SIMD & FP operands, even though machine instructions do not
mix them in general (as in a destination register is either a GPR
or not). As a result it had methods such as sf_bit() that made
sense only for one type of operand.
Another issue was that the enum name was not reflecting its purpose
accurately - it was meant to represent an instruction operand size,
not an instruction size, which is fixed in A64 (always 4 bytes).
Now the enum is split into one for GPR operands and another for
scalar SIMD & FP operands.
Copyright (c) 2020, Arm Limited.
This PR changes the aarch64 ABI implementation to use positive offsets
from SP, rather than negative offsets from FP, to refer to spill slots
and stack-local storage. This allows for better addressing-mode options,
and hence slightly better code: e.g., the unsigned scaled 12-bit offset
mode can be used to reach anywhere in a 32KB frame without extra
address-construction instructions, whereas negative offsets are limited
to a signed 9-bit unscaled mode (-256 bytes).
To enable this, the PR introduces a notion of "nominal SP offsets" as a
virtual addressing mode, lowered during the emission pass. The offsets
are relative to "SP after adjusting downward to allocate stack/spill
slots", but before pushing clobbers. This allows the addressing-mode
expressions to be generated before register allocation (or during it,
for spill/reload sequences).
To convert these offsets into *true* offsets from SP, we need to track
how much further SP is moved downward, and compensate for this. We do so
with "virtual SP offset adjustment" pseudo-instructions: these are seen
by the emission pass, and result in no instruction (0 byte output), but
update state that is now threaded through each instruction emission in
turn. In this way, we can push e.g. stack args for a call and adjust
the virtual SP offset, allowing reloads from nominal-SP-relative
spillslots while we do the argument setup with "real SP offsets" at the
same time.
Previously, `fcopysign` was mysteriously failing to pass the
`float_misc` spec test. This was tracked down to bad logical-immediate
masks used to separate the sign and not-sign bits. In particular, the
masks for the and-not operations were wrong. The `invert()` function on
an `ImmLogic` immediate, it turns out, assumed every immediate would be
used by a 64-bit instruction; `ImmLogic` immediates are subtly different
for 32-bit instructions. This change tracks the instruction size (32 or
64 bits) intended for use with each such immediate, and passes it back
into `maybe_from_u64` when computing the inverted immediate.
Addresses several of the failures (`float_misc`, `f32_bitwise`) for
#1521 (test failures) and presumably helps #1519 (SpiderMonkey
integration).
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
