* Cranelift: Introduce the `tail` calling convention
This is an unstable-ABI calling convention that we will eventually use to
support Wasm tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Introduce the `return_call` and `return_call_indirect` instructions
These will be used to implement tail calls for Wasm and any other language
targeting CLIF. The `return_call_indirect` instruction differs from the Wasm
instruction of the same name by taking a native address callee rather than a
Wasm function index.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Implement verification rules for `return_call[_indirect]`
They must:
* have the same return types between the caller and callee,
* have the same calling convention between caller and callee,
* and that calling convention must support tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* cargo fmt
---------
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
This rewrite was introduced in #5676 and then reverted in #5682 due to a footgun
where we accidentally weren't actually checking the `y == !z` precondition. This
commit fixes the precondition check. It also fixes the arithmetic to be
correctly masked to the value type's width.
This reverts commit 268f6bfc1d.
Add a display method to BlockCall that returns a std::fmt::Displayable result. Rework the display code in the write module of cranelift-codegen to use this method instead.
Souper requires an `i1` condition value, we don't and will implicitly check
against 0. We were truncating conditions but should actually be doing the
comparison against `0`.
Remove the boolean parameters from the instruction builder functions, as they were only ever used with true. Additionally, change the returns and branches functions to imply terminates_block.
Most of these optimizations are in the egraph `cprop.isle` rules now,
making a separate crate unnecessary.
Also I think the `udiv` optimizations here are straight-up wrong (doing
signed instead of unsigned division, and panicking instead of preserving
traps on division by zero) so I'm guessing this crate isn't seriously
used anywhere.
At the least, bjorn3 confirms that cg_clif doesn't use this, and I've
verified that Wasmtime doesn't either.
Closes#1090.
Improve the generated code for unordered floating point comparisons by negating the comparison and inveritng the branches. This allows us to pick the unordered versions, which generate significantly better code.
Add a conditional branch instruction with two targets: brif. This instruction will eventually replace brz and brnz, as it encompasses the behavior of both.
This PR also changes the InstructionData layout for instruction formats that hold BlockCall values, taking the same approach we use for Value arguments. This allows branch_destination to return a slice to the BlockCall values held in the instruction, rather than requiring that we pattern match on InstructionData to fetch the then/else blocks.
Function generation for fuzzing has been updated to generate uses of brif, and I've run the cranelift-fuzzgen target locally for hours without triggering any new failures.
This PR follows up on #5382 and #5391, which rebuilt the egraph-based optimization framework to be more performant, by enabling it by default.
Based on performance results in #5382 (my measurements on SpiderMonkey and bjorn3's independent confirmation with cg_clif), it seems that this is reasonable to enable. Now that we have been fuzzing compiler configurations with egraph opts (#5388) for 6 weeks, having fixed a few fuzzbugs that came up (#5409, #5420, #5438) and subsequently received no further reports from OSS-Fuzz, I believe it is stable enough to rely on.
This PR enables `use_egraphs`, and also normalizes its meaning: previously it forced optimization (it basically meant "turn on the egraph optimization machinery"), now it runs egraph opts if the opt level indicates (it means "use egraphs to optimize if we are going to optimize"). The conditionals in the top-level pass driver are a little subtle, but will get simpler once we can remove the non-egraph path (which we plan to do eventually!).
Fixes#5181.
* Support mergeable-but-side-effectful (idempotent) operations in general in the egraph's GVN.
This mirrors the similar change made in #5534.
* Add tests for egraph case.
Add a new type BlockCall that represents the pair of a block name with arguments to be passed to it. (The mnemonic here is that it looks a bit like a function call.) Rework the implementation of jump, brz, and brnz to use BlockCall instead of storing the block arguments as varargs in the instruction's ValueList.
To ensure that we're processing block arguments from BlockCall values in instructions, three new functions have been introduced on DataFlowGraph that both sets of arguments:
inst_values - returns an iterator that traverses values in the instruction and block arguments
map_inst_values - applies a function to each value in the instruction and block arguments
overwrite_inst_values - overwrite all values in an instruction and block arguments with values from the iterator
Co-authored-by: Jamey Sharp <jamey@minilop.net>
This is a cleanup to help prepare for #5464.
Most of the diff is inlining the closure for `mark_all_uses_as_multiple`
which was only called once. That avoids some borrow-checker challenges.
The key change is that the former `push_args_on_stack` closure no longer
actually pushes the iterator on the stack, but just returns it. That
way this closure doesn't need the name of the stack's type. It also
allows it to be reused in the debug_assert.
* add clif-util compile option to output object file
* switch from a box to a borrow
* update objectmodule tests to use borrowed isa
* put targetisa into an arc
Fuzz additional targets in the cranelift-icache target. The list of targets fuzzed is controlled by the targets enabled in fuzz/Cargo.toml.
This PR also reworks how instruction disabling is done in function generator, moving the deny-list to a function to make the decision at runtime instead of compile time.
* Switch duplicate loads w/ dynamic memories test to `min_size = 0`
This test was accidentally hitting a special case for bounds checks for when we
know that `offset + access_size < min_size` and can skip some steps. This
commit changes the `min_size` of the memory to zero so that we are forced to do
fully general bounds checks.
* Cranelift: Mark `uadd_overflow_trap` as okay for GVN
Although this improves our test sequence for duplicate loads with dynamic
memories, it unfortunately doesn't have any effect on sightglass benchmarks:
```
instantiation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[34448 35607.23 37158] gvn_uadd_overflow_trap.so
[34566 35734.05 36585] main.so
instantiation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[44101 60449.62 92712] gvn_uadd_overflow_trap.so
[44011 60436.37 92690] main.so
instantiation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[35595 36675.72 38153] gvn_uadd_overflow_trap.so
[35440 36670.42 37993] main.so
compilation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[17370195 17405125.62 17471222] gvn_uadd_overflow_trap.so
[17369324 17404859.43 17470725] main.so
execution :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[7055720520 7055886880.32 7056265930] gvn_uadd_overflow_trap.so
[7055719554 7055843809.33 7056193289] main.so
compilation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[683589861 683767276.00 684098366] gvn_uadd_overflow_trap.so
[683590024 683767998.02 684097885] main.so
execution :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[46436883 46437135.10 46437823] gvn_uadd_overflow_trap.so
[46436883 46437087.67 46437785] main.so
compilation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[126522461 126565812.58 126647044] gvn_uadd_overflow_trap.so
[126522176 126565757.75 126647522] main.so
execution :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[653010531 653010533.03 653010544] gvn_uadd_overflow_trap.so
[653010531 653010533.18 653010537] main.so
```
* cranelift-codegen-meta: Rename `side_effects_okay_for_gvn` to `side_effects_idempotent`
* cranelift-filetests: Ensure there is a trailing newline for blessed Wasm tests
Remove the lower_br_fcmp function from the riscv64 backend. This PR only affects the emit implementation for FloatRound, replacing the uses of lower_br_fcmp with direct uses of FpuRRR and CondBr.
Any changes in behavior here should be already covered by the runtests for ceil, floor, trunc, and nearest.
Remove the MInst::TrapFf instruction in the riscv64 backend. It was only used in two places in the emit case for FloatRound, and was easily replaced with a combination of FpuRRR and TrapIf.
* Cranelift: Make spectre guards GVN-able
While these instructions have a side effect that is otherwise invisible to the
optimizer, the side effect in question is idempotent, so it can be de-duplicated
by GVN.
* Cranelift: Run redundant load replacement and GVN twice
This allows us to actually replace redundant Wasm loads with dynamic memories.
While this improves our hand-crafted test sequences, it doesn't seem to have any
improvement on sightglass benchmarks run with dynamic memories, however it also
isn't a hit to compilation times, so seems generally good to land anyways:
```
$ cargo run --release -- benchmark -e ~/scratch/once.so -e ~/scratch/twice.so -m insts-retired --processes 20 --iterations-per-process 3 --engine-flags="--static-memory-maximum-size 0" -- benchmarks/default.suite
compilation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[683595240 683768610.53 684097577] once.so
[683597068 700115966.83 1664907164] twice.so
instantiation :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[44107 60411.07 92785] once.so
[44138 59552.32 92097] twice.so
compilation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[17369916 17404839.78 17471458] once.so
[17369935 17625713.87 30700150] twice.so
compilation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[126523640 126566170.80 126648265] once.so
[126523076 127174580.30 163145149] twice.so
instantiation :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[34569 35686.25 36513] once.so
[34651 35749.97 36953] twice.so
instantiation :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[35146 36639.10 37707] once.so
[34472 36580.82 38431] twice.so
execution :: instructions-retired :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[7055720115 7055841324.82 7056180024] once.so
[7055717681 7055877095.85 7056225217] twice.so
execution :: instructions-retired :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[46436881 46437081.28 46437691] once.so
[46436883 46437127.68 46437766] twice.so
execution :: instructions-retired :: benchmarks/bz2/benchmark.wasm
No difference in performance.
[653010530 653010533.27 653010539] once.so
[653010531 653010532.95 653010538] twice.so
```
Rework the compilation of fcmp in the riscv64 backend to be in ISLE, removing the need for the dedicated Fcmp instruction. This change is motivated by #5500, which showed that the riscv64 backend was generating branch instructions in the middle of a basic block.
We can't remove lower_br_fcmp quite yet as it's used in a few places in the emit module, but it's now no longer reachable from the ISLE lowerings.
Fixes#5500
