* Implement strings in adapter modules
This commit is a hefty addition to Wasmtime's support for the component
model. This implements the final remaining type (in the current type
hierarchy) unimplemented in adapter module trampolines: strings. Strings
are the most complicated type to implement in adapter trampolines
because they are highly structured chunks of data in memory (according
to specific encodings). Additionally each lift/lower operation can
choose its own encoding for strings meaning that Wasmtime, the host, may
have to convert between any pairwise ordering of string encodings.
The `CanonicalABI.md` in the component-model repo in general specifies
all the fiddly bits of string encoding so there's not a ton of wiggle
room for Wasmtime to get creative. This PR largely "just" implements
that. The high-level architecture of this implementation is:
* Fused adapters are first identified to determine src/dst string
encodings. This statically fixes what transcoding operation is being
performed.
* The generated adapter will be responsible for managing calls to
`realloc` and performing bounds checks. The adapter itself does not
perform memory copies or validation of string contents, however.
Instead each transcoding operation is modeled as an imported function
into the adapter module. This means that the adapter module
dynamically, during compile time, determines what string transcoders
are needed. Note that an imported transcoder is not only parameterized
over the transcoding operation but additionally which memory is the
source and which is the destination.
* The imported core wasm functions are modeled as a new
`CoreDef::Transcoder` structure. These transcoders end up being small
Cranelift-compiled trampolines. The Cranelift-compiled trampoline will
load the actual base pointer of memory and add it to the relative
pointers passed as function arguments. This trampoline then calls a
transcoder "libcall" which enters Rust-defined functions for actual
transcoding operations.
* Each possible transcoding operation is implemented in Rust with a
unique name and a unique signature depending on the needs of the
transcoder. I've tried to document inline what each transcoder does.
This means that the `Module::translate_string` in adapter modules is by
far the largest translation method. The main reason for this is due to
the management around calling the imported transcoder functions in the
face of validating string pointer/lengths and performing the dance of
`realloc`-vs-transcode at the right time. I've tried to ensure that each
individual case in transcoding is documented well enough to understand
what's going on as well.
Additionally in this PR is a full implementation in the host for the
`latin1+utf16` encoding which means that both lifting and lowering host
strings now works with this encoding.
Currently the implementation of each transcoder function is likely far
from optimal. Where possible I've leaned on the standard library itself
and for latin1-related things I'm leaning on the `encoding_rs` crate. I
initially tried to implement everything with `encoding_rs` but was
unable to uniformly do so easily. For now I settled on trying to get a
known-correct (even in the face of endianness) implementation for all of
these transcoders. If an when performance becomes an issue it should be
possible to implement more optimized versions of each of these
transcoding operations.
Testing this commit has been somewhat difficult and my general plan,
like with the `(list T)` type, is to rely heavily on fuzzing to cover
the various cases here. In this PR though I've added a simple test that
pushes some statically known strings through all the pairs of encodings
between source and destination. I've attempted to pick "interesting"
strings that one way or another stress the various paths in each
transcoding operation to ideally get full branch coverage there.
Additionally a suite of "negative" tests have also been added to ensure
that validity of encoding is actually checked.
* Fix a temporarily commented out case
* Fix wasmtime-runtime tests
* Update deny.toml configuration
* Add `BSD-3-Clause` for the `encoding_rs` crate
* Remove some unused licenses
* Add an exemption for `encoding_rs` for now
* Split up the `translate_string` method
Move out all the closures and package up captured state into smaller
lists of arguments.
* Test out-of-bounds for zero-length strings
* Add shared memories
This change adds the ability to use shared memories in Wasmtime when the
[threads proposal] is enabled. Shared memories are annotated as `shared`
in the WebAssembly syntax, e.g., `(memory 1 1 shared)`, and are
protected from concurrent access during `memory.size` and `memory.grow`.
[threads proposal]: https://github.com/WebAssembly/threads/blob/master/proposals/threads/Overview.md
In order to implement this in Wasmtime, there are two main cases to
cover:
- a program may simply create a shared memory and possibly export it;
this means that Wasmtime itself must be able to create shared
memories
- a user may create a shared memory externally and pass it in as an
import during instantiation; this is the case when the program
contains code like `(import "env" "memory" (memory 1 1
shared))`--this case is handled by a new Wasmtime API
type--`SharedMemory`
Because of the first case, this change allows any of the current
memory-creation mechanisms to work as-is. Wasmtime can still create
either static or dynamic memories in either on-demand or pooling modes,
and any of these memories can be considered shared. When shared, the
`Memory` runtime container will lock appropriately during `memory.size`
and `memory.grow` operations; since all memories use this container, it
is an ideal place for implementing the locking once and once only.
The second case is covered by the new `SharedMemory` structure. It uses
the same `Mmap` allocation under the hood as non-shared memories, but
allows the user to perform the allocation externally to Wasmtime and
share the memory across threads (via an `Arc`). The pointer address to
the actual memory is carefully wired through and owned by the
`SharedMemory` structure itself. This means that there are differing
views of where to access the pointer (i.e., `VMMemoryDefinition`): for
owned memories (the default), the `VMMemoryDefinition` is stored
directly by the `VMContext`; in the `SharedMemory` case, however, this
`VMContext` must point to this separate structure.
To ensure that the `VMContext` can always point to the correct
`VMMemoryDefinition`, this change alters the `VMContext` structure.
Since a `SharedMemory` owns its own `VMMemoryDefinition`, the
`defined_memories` table in the `VMContext` becomes a sequence of
pointers--in the shared memory case, they point to the
`VMMemoryDefinition` owned by the `SharedMemory` and in the owned memory
case (i.e., not shared) they point to `VMMemoryDefinition`s stored in a
new table, `owned_memories`.
This change adds an additional indirection (through the `*mut
VMMemoryDefinition` pointer) that could add overhead. Using an imported
memory as a proxy, we measured a 1-3% overhead of this approach on the
`pulldown-cmark` benchmark. To avoid this, Cranelift-generated code will
special-case the owned memory access (i.e., load a pointer directly to
the `owned_memories` entry) for `memory.size` so that only
shared memories (and imported memories, as before) incur the indirection
cost.
* review: remove thread feature check
* review: swap wasmtime-types dependency for existing wasmtime-environ use
* review: remove unused VMMemoryUnion
* review: reword cross-engine error message
* review: improve tests
* review: refactor to separate prevent Memory <-> SharedMemory conversion
* review: into_shared_memory -> as_shared_memory
* review: remove commented out code
* review: limit shared min/max to 32 bits
* review: skip imported memories
* review: imported memories are not owned
* review: remove TODO
* review: document unsafe send + sync
* review: add limiter assertion
* review: remove TODO
* review: improve tests
* review: fix doc test
* fix: fixes based on discussion with Alex
This changes several key parts:
- adds memory indexes to imports and exports
- makes `VMMemoryDefinition::current_length` an atomic usize
* review: add `Extern::SharedMemory`
* review: remove TODO
* review: atomically load from VMMemoryDescription in JIT-generated code
* review: add test probing the last available memory slot across threads
* fix: move assertion to new location due to rebase
* fix: doc link
* fix: add TODOs to c-api
* fix: broken doc link
* fix: modify pooling allocator messages in tests
* review: make owned_memory_index panic instead of returning an option
* review: clarify calculation of num_owned_memories
* review: move 'use' to top of file
* review: change '*const [u8]' to '*mut [u8]'
* review: remove TODO
* review: avoid hard-coding memory index
* review: remove 'preallocation' parameter from 'Memory::_new'
* fix: component model memory length
* review: check that shared memory plans are static
* review: ignore growth limits for shared memory
* review: improve atomic store comment
* review: add FIXME for memory growth failure
* review: add comment about absence of bounds-checked 'memory.size'
* review: make 'current_length()' doc comment more precise
* review: more comments related to memory.size non-determinism
* review: make 'vmmemory' unreachable for shared memory
* review: move code around
* review: thread plan through to 'wrap()'
* review: disallow shared memory allocation with the pooling allocator
* Initial skeleton of some component model processing
This commit is the first of what will likely be many to implement the
component model proposal in Wasmtime. This will be structured as a
series of incremental commits, most of which haven't been written yet.
My hope is to make this incremental and over time to make this easier to
review and easier to test each step in isolation.
Here much of the skeleton of how components are going to work in
Wasmtime is sketched out. This is not a complete implementation of the
component model so it's not all that useful yet, but some things you can
do are:
* Process the type section into a representation amenable for working
with in Wasmtime.
* Process the module section and register core wasm modules.
* Process the instance section for core wasm modules.
* Process core wasm module imports.
* Process core wasm instance aliasing.
* Ability to compile a component with core wasm embedded.
* Ability to instantiate a component with no imports.
* Ability to get functions from this component.
This is already starting to diverge from the previous module linking
representation where a `Component` will try to avoid unnecessary
metadata about the component and instead internally only have the bare
minimum necessary to instantiate the module. My hope is we can avoid
constructing most of the index spaces during instantiation only for it
to all ge thrown away. Additionally I'm predicting that we'll need to
see through processing where possible to know how to generate adapters
and where they are fused.
At this time you can't actually call a component's functions, and that's
the next PR that I would like to make.
* Add tests for the component model support
This commit uses the recently updated wasm-tools crates to add tests for
the component model added in the previous commit. This involved updating
the `wasmtime-wast` crate for component-model changes. Currently the
component support there is quite primitive, but enough to at least
instantiate components and verify the internals of Wasmtime are all
working correctly. Additionally some simple tests for the embedding API
have also been added.
This commit fixes an issue introduced in #4046 where the checks for
ensuring that the memory initialization image for a module was
constrained in its size failed to trigger and a very small module could
produce an arbitrarily large memory image.
The bug in question was that if a module only had empty data segments at
arbitrarily small and large addresses then the loop which checks whether
or not the image is allowed was skipped entirely since it was seen that
the memory had no data size. The fix here is to skip segments that are
empty to ensure that if the validation loop is skipped then no data
segments will be processed to create the image (and the module won't end
up having an image in the end).
* Remove the `Paged` memory initialization variant
This commit simplifies the `MemoryInitialization` enum by removing the
`Paged` variant. The `Paged` variant was originally added for uffd, but
that support has now been removed in #4040. This is no longer necessary
but is still used as an intermediate step of becoming a `Static` variant
of initialized memory (which copy-on-write uses). As a result this
commit largely modifies the static initialization of memory steps and
folds the two methods together.
* Apply suggestions from code review
Co-authored-by: Peter Huene <peter@huene.dev>
Co-authored-by: Peter Huene <peter@huene.dev>
* Remove duplicate `TypeTables` type
This was once needed historically but it is no longer needed.
* Make the internals of `TypeTables` private
Instead of reaching internally for the `wasm_signatures` map an `Index`
implementation now exists to indirect accesses through the type of the
index being accessed. For the component model this table of types will
grow a number of other tables and this'll assist in consuming sites not
having to worry so much about which map they're reaching into.
* Remove the module linking implementation in Wasmtime
This commit removes the experimental implementation of the module
linking WebAssembly proposal from Wasmtime. The module linking is no
longer intended for core WebAssembly but is instead incorporated into
the component model now at this point. This means that very large parts
of Wasmtime's implementation of module linking are no longer applicable
and would change greatly with an implementation of the component model.
The main purpose of this is to remove Wasmtime's reliance on the support
for module-linking in `wasmparser` and tooling crates. With this
reliance removed we can move over to the `component-model` branch of
`wasmparser` and use the updated support for the component model.
Additionally given the trajectory of the component model proposal the
embedding API of Wasmtime will not look like what it looks like today
for WebAssembly. For example the core wasm `Instance` will not change
and instead a `Component` is likely to be added instead.
Some more rationale for this is in #3941, but the basic idea is that I
feel that it's not going to be viable to develop support for the
component model on a non-`main` branch of Wasmtime. Additionaly I don't
think it's viable, for the same reasons as `wasm-tools`, to support the
old module linking proposal and the new component model at the same
time.
This commit takes a moment to not only delete the existing module
linking implementation but some abstractions are also simplified. For
example module serialization is a bit simpler that there's only one
module. Additionally instantiation is much simpler since the only
initializer we have to deal with are imports and nothing else.
Closes#3941
* Fix doc link
* Update comments
* Shrink the size of the anyfunc table in `VMContext`
This commit shrinks the size of the `VMCallerCheckedAnyfunc` table
allocated into a `VMContext` to be the size of the number of "escaped"
functions in a module rather than the number of functions in a module.
Escaped functions include exports, table elements, etc, and are
typically an order of magnitude smaller than the number of functions in
general. This should greatly shrink the `VMContext` for some modules
which while we aren't necessarily having any problems with that today
shouldn't cause any problems in the future.
The original motivation for this was that this came up during the recent
lazy-table-initialization work and while it no longer has a direct
performance benefit since tables aren't initialized at all on
instantiation it should still improve long-running instances
theoretically with smaller `VMContext` allocations as well as better
locality between anyfuncs.
* Fix some tests
* Remove redundant hash set
* Use a helper for pushing function type information
* Use a more descriptive `is_escaping` method
* Clarify a comment
* Fix condition
In #3820 we see an issue with the new heuristics that control use of
memfd: it's entirely possible for a reasonable Wasm module produced by a
snapshotting system to have a relatively sparse heap (less than 50%
filled). A system that avoids memfd because of this would have an
undesirable performance reduction on such modules.
Ultimately we should try to implement a hybrid scheme where we support
outlier/leftover initializers, but for now this PR makes the "always
allow dense" limit configurable. This way, embedders that want to ensure
that memfd is used can do so, if they have other knowledge about the
maximum heap size allowed in their system.
(Partially addresses #3820 but let's leave it open to track the hybrid
idea)
* Update memfd image construction to avoid excessively large images
Previously memfd-based image construction had a hard limit of a 1GB
memory image but this mean that tiny wasm modules could allocate up to
1GB of memory which became a bit excessive especially in terms of memory
usage during fuzzing. To fix this the conversion to a static memory
image has been updated to first do a conversion to paged memory
initialization, which is sparse, followed by a second conversion to
static memory initialization.
The sparse construction for the paged step should make it such that the
upper/lower bounds of the initialization image are easily computed, and
then afterwards this limit can be checked against some heuristics to
determine if we're willing to commit to building up a whole static image
for that module. The heuristics have been tweaked from "must be less
than 1GB" to one of two conditions must be true:
* Either the total memory image size is at most twice the size of the
original paged data itself.
* Otherwise the memory image size must be smaller than a reasonable
threshold, currently 1MB.
We'll likely need to tweak this over time and it's still possible to
cause a lot of extra memory consumption, but for now this should be
enough to appease the fuzzers.
Closes#3815
* Review comments
* Skip memfd creation with precompiled modules
This commit updates the memfd support internally to not actually use a
memfd if a compiled module originally came from disk via the
`wasmtime::Module::deserialize_file` API. In this situation we already
have a file descriptor open and there's no need to copy a module's heap
image to a new file descriptor.
To facilitate a new source of `mmap` the currently-memfd-specific-logic
of creating a heap image is generalized to a new form of
`MemoryInitialization` which is attempted for all modules at
module-compile-time. This means that the serialized artifact to disk
will have the memory image in its entirety waiting for us. Furthermore
the memory image is ensured to be padded and aligned carefully to the
target system's page size, notably meaning that the data section in the
final object file is page-aligned and the size of the data section is
also page aligned.
This means that when a precompiled module is mapped from disk we can
reuse the underlying `File` to mmap all initial memory images. This
means that the offset-within-the-memory-mapped-file can differ for
memfd-vs-not, but that's just another piece of state to track in the
memfd implementation.
In the limit this waters down the term "memfd" for this technique of
quickly initializing memory because we no longer use memfd
unconditionally (only when the backing file isn't available).
This does however open up an avenue in the future to porting this
support to other OSes because while `memfd_create` is Linux-specific
both macOS and Windows support mapping a file with copy-on-write. This
porting isn't done in this PR and is left for a future refactoring.
Closes#3758
* Enable "memfd" support on all unix systems
Cordon off the Linux-specific bits and enable the memfd support to
compile and run on platforms like macOS which have a Linux-like `mmap`.
This only works if a module is mapped from a precompiled module file on
disk, but that's better than not supporting it at all!
* Fix linux compile
* Use `Arc<File>` instead of `MmapVecFileBacking`
* Use a named struct instead of mysterious tuples
* Comment about unsafety in `Module::deserialize_file`
* Fix tests
* Fix uffd compile
* Always align data segments
No need to have conditional alignment since their sizes are all aligned
anyway
* Update comment in build.rs
* Use rustix, not `region`
* Fix some confusing logic/names around memory indexes
These functions all work with memory indexes, not specifically defined
memory indexes.
* Move function names out of `Module`
This commit moves function names in a module out of the
`wasmtime_environ::Module` type and into separate sections stored in the
final compiled artifact. Spurred on by #3787 to look at module load
times I noticed that a huge amount of time was spent in deserializing
this map. The `spidermonkey.wasm` file, for example, has a 3MB name
section which is a lot of unnecessary data to deserialize at module load
time.
The names of functions are now split out into their own dedicated
section of the compiled artifact and metadata about them is stored in a
more compact format at runtime by avoiding a `BTreeMap` and instead
using a sorted array. Overall this improves deserialize times by up to
80% for modules with large name sections since the name section is no
longer deserialized at load time and it's lazily paged in as names are
actually referenced.
* Fix a typo
* Fix compiled module determinism
Need to not only sort afterwards but also first to ensure the data of
the name section is consistent.
During instance initialization, we build two sorts of arrays eagerly:
- We create an "anyfunc" (a `VMCallerCheckedAnyfunc`) for every function
in an instance.
- We initialize every element of a funcref table with an initializer to
a pointer to one of these anyfuncs.
Most instances will not touch (via call_indirect or table.get) all
funcref table elements. And most anyfuncs will never be referenced,
because most functions are never placed in tables or used with
`ref.func`. Thus, both of these initialization tasks are quite wasteful.
Profiling shows that a significant fraction of the remaining
instance-initialization time after our other recent optimizations is
going into these two tasks.
This PR implements two basic ideas:
- The anyfunc array can be lazily initialized as long as we retain the
information needed to do so. For now, in this PR, we just recreate the
anyfunc whenever a pointer is taken to it, because doing so is fast
enough; in the future we could keep some state to know whether the
anyfunc has been written yet and skip this work if redundant.
This technique allows us to leave the anyfunc array as uninitialized
memory, which can be a significant savings. Filling it with
initialized anyfuncs is very expensive, but even zeroing it is
expensive: e.g. in a large module, it can be >500KB.
- A funcref table can be lazily initialized as long as we retain a link
to its corresponding instance and function index for each element. A
zero in a table element means "uninitialized", and a slowpath does the
initialization.
Funcref tables are a little tricky because funcrefs can be null. We need
to distinguish "element was initially non-null, but user stored explicit
null later" from "element never touched" (ie the lazy init should not
blow away an explicitly stored null). We solve this by stealing the LSB
from every funcref (anyfunc pointer): when the LSB is set, the funcref
is initialized and we don't hit the lazy-init slowpath. We insert the
bit on storing to the table and mask it off after loading.
We do have to set up a precomputed array of `FuncIndex`s for the table
in order for this to work. We do this as part of the module compilation.
This PR also refactors the way that the runtime crate gains access to
information computed during module compilation.
Performance effect measured with in-tree benches/instantiation.rs, using
SpiderMonkey built for WASI, and with memfd enabled:
```
BEFORE:
sequential/default/spidermonkey.wasm
time: [68.569 us 68.696 us 68.856 us]
sequential/pooling/spidermonkey.wasm
time: [69.406 us 69.435 us 69.465 us]
parallel/default/spidermonkey.wasm: with 1 background thread
time: [69.444 us 69.470 us 69.497 us]
parallel/default/spidermonkey.wasm: with 16 background threads
time: [183.72 us 184.31 us 184.89 us]
parallel/pooling/spidermonkey.wasm: with 1 background thread
time: [69.018 us 69.070 us 69.136 us]
parallel/pooling/spidermonkey.wasm: with 16 background threads
time: [326.81 us 337.32 us 347.01 us]
WITH THIS PR:
sequential/default/spidermonkey.wasm
time: [6.7821 us 6.8096 us 6.8397 us]
change: [-90.245% -90.193% -90.142%] (p = 0.00 < 0.05)
Performance has improved.
sequential/pooling/spidermonkey.wasm
time: [3.0410 us 3.0558 us 3.0724 us]
change: [-95.566% -95.552% -95.537%] (p = 0.00 < 0.05)
Performance has improved.
parallel/default/spidermonkey.wasm: with 1 background thread
time: [7.2643 us 7.2689 us 7.2735 us]
change: [-89.541% -89.533% -89.525%] (p = 0.00 < 0.05)
Performance has improved.
parallel/default/spidermonkey.wasm: with 16 background threads
time: [147.36 us 148.99 us 150.74 us]
change: [-18.997% -18.081% -17.285%] (p = 0.00 < 0.05)
Performance has improved.
parallel/pooling/spidermonkey.wasm: with 1 background thread
time: [3.1009 us 3.1021 us 3.1033 us]
change: [-95.517% -95.511% -95.506%] (p = 0.00 < 0.05)
Performance has improved.
parallel/pooling/spidermonkey.wasm: with 16 background threads
time: [49.449 us 50.475 us 51.540 us]
change: [-85.423% -84.964% -84.465%] (p = 0.00 < 0.05)
Performance has improved.
```
So an improvement of something like 80-95% for a very large module (7420
functions in its one funcref table, 31928 functions total).
* Consolidate methods of memory initialization
This commit consolidates the few locations that we have which are
performing memory initialization. Namely the uffd logic for creating
paged memory as well as the memfd logic for creating a memory image now
share an implementation to avoid duplicating bounds-checks or other
validation conditions. The main purpose of this commit is to fix a
fuzz-bug where a multiplication overflowed. The overflow itself was
benign but it seemed better to fix the overflow in only one place
instead of multiple.
The overflow in question is specifically when an initializer is checked
to be statically out-of-bounds and multiplies a memory's minimum size by
the wasm page size, returning the result as a `u64`. For
memory64-memories of size `1 << 48` this multiplication will overflow.
This was actually a preexisting bug with the `try_paged_init` function
which was copied for memfd, but cropped up here since memfd is used more
often than paged initialization. The fix here is to skip validation of
the `end` index if the size of memory is `1 << 64` since if the `end`
index can be represented as a `u64` then it's in-bounds. This is
somewhat of an esoteric case, though, since a memory of minimum size `1
<< 64` can't ever exist (we can't even ask the os for that much memory,
and even if we could it would fail).
* Fix memfd test
* Fix some tests
* Remove InitMemory enum
* Add an `is_segmented` helper method
* More clear variable name
* Make arguments to `init_memory` more descriptive
As first suggested by Jan on the Zulip here [1], a cheap and effective
way to obtain copy-on-write semantics of a "backing image" for a Wasm
memory is to mmap a file with `MAP_PRIVATE`. The `memfd` mechanism
provided by the Linux kernel allows us to create anonymous,
in-memory-only files that we can use for this mapping, so we can
construct the image contents on-the-fly then effectively create a CoW
overlay. Furthermore, and importantly, `madvise(MADV_DONTNEED, ...)`
will discard the CoW overlay, returning the mapping to its original
state.
By itself this is almost enough for a very fast
instantiation-termination loop of the same image over and over,
without changing the address space mapping at all (which is
expensive). The only missing bit is how to implement
heap *growth*. But here memfds can help us again: if we create another
anonymous file and map it where the extended parts of the heap would
go, we can take advantage of the fact that a `mmap()` mapping can
be *larger than the file itself*, with accesses beyond the end
generating a `SIGBUS`, and the fact that we can cheaply resize the
file with `ftruncate`, even after a mapping exists. So we can map the
"heap extension" file once with the maximum memory-slot size and grow
the memfd itself as `memory.grow` operations occur.
The above CoW technique and heap-growth technique together allow us a
fastpath of `madvise()` and `ftruncate()` only when we re-instantiate
the same module over and over, as long as we can reuse the same
slot. This fastpath avoids all whole-process address-space locks in
the Linux kernel, which should mean it is highly scalable. It also
avoids the cost of copying data on read, as the `uffd` heap backend
does when servicing pagefaults; the kernel's own optimized CoW
logic (same as used by all file mmaps) is used instead.
[1] https://bytecodealliance.zulipchat.com/#narrow/stream/206238-general/topic/Copy.20on.20write.20based.20instance.20reuse/near/266657772
* Remove some allocations in `CodeMemory`
This commit removes the `FinishedFunctions` type as well as allocations
associated with trampolines when allocating inside of a `CodeMemory`.
The main goal of this commit is to improve the time spent in
`CodeMemory` where currently today a good portion of time is spent
simply parsing symbol names and trying to extract function indices from
them. Instead this commit implements a new strategy (different from #3236)
where compilation records offset/length information for all
functions/trampolines so this doesn't need to be re-learned from the
object file later.
A consequence of this commit is that this offset information will be
decoded/encoded through `bincode` unconditionally, but we can also
optimize that later if necessary as well.
Internally this involved quite a bit of refactoring since the previous
map for `FinishedFunctions` was relatively heavily relied upon.
* comments
* Reduce indentation in `to_paged`
Use a few early-returns from `match` to avoid lots of extra indentation.
* Move wasm data sections out of `wasmtime_environ::Module`
This is the first step down the road of #3230. The long-term goal is
that `Module` is always `bincode`-decoded, but wasm data segments are a
possibly very-large portion of this residing in modules which we don't
want to shove through bincode. This refactors the internals of wasmtime
to be ok with this data living separately from the `Module` itself,
providing access at necessary locations.
Wasm data segments are now extracted from a wasm module and
concatenated directly. Data sections then describe ranges within this
concatenated list of data, and passive data works the same way. This
implementation does not lend itself to eventually optimizing the case
where passive data is dropped and no longer needed. That's left for a
future PR.
* Fix determinism of compiled modules
Currently wasmtime's compilation artifacts are not deterministic due to
the usage of `HashMap` during serialization which has randomized order
of its elements. This commit fixes that by switching to a sorted
`BTreeMap` for various maps. A test is also added to ensure determinism.
If in the future the performance of `BTreeMap` is not as good as
`HashMap` for some of these cases we can implement a fancier
`serialize_with`-style solution where we sort keys during serialization,
but only during serialization and otherwise use a `HashMap`.
* fix lightbeam
* Implement a setting for reserved dynamic memory growth
Dynamic memories aren't really that heavily used in Wasmtime right now
because for most 32-bit memories they're classified as "static" which
means they reserve 4gb of address space and never move. Growth of a
static memory is simply making pages accessible, so it's quite fast.
With the memory64 feature, however, this is no longer true since all
memory64 memories are classified as "dynamic" at this time. Previous to
this commit growth of a dynamic memory unconditionally moved the entire
linear memory in the host's address space, always resulting in a new
`Mmap` allocation. This behavior is causing fuzzers to time out when
working with 64-bit memories because incrementally growing a memory by 1
page at a time can incur a quadratic time complexity as bytes are
constantly moved.
This commit implements a scheme where there is now a tunable setting for
memory to be reserved at the end of a dynamic memory to grow into. This
means that dynamic memory growth is ideally amortized as most calls to
`memory.grow` will be able to grow into the pre-reserved space. Some
calls, though, will still need to copy the memory around.
This helps enable a commented out test for 64-bit memories now that it's
fast enough to run in debug mode. This is because the growth of memory
in the test no longer needs to copy 4gb of zeros.
* Test fixes & review comments
* More comments
* Move `CompiledFunction` into wasmtime-cranelift
This commit moves the `wasmtime_environ::CompiledFunction` type into the
`wasmtime-cranelift` crate. This type has lots of Cranelift-specific
pieces of compilation and doesn't need to be generated by all Wasmtime
compilers. This replaces the usage in the `Compiler` trait with a
`Box<Any>` type that each compiler can select. Each compiler must still
produce a `FunctionInfo`, however, which is shared information we'll
deserialize for each module.
The `wasmtime-debug` crate is also folded into the `wasmtime-cranelift`
crate as a result of this commit. One possibility was to move the
`CompiledFunction` commit into its own crate and have `wasmtime-debug`
depend on that, but since `wasmtime-debug` is Cranelift-specific at this
time it didn't seem like it was too too necessary to keep it separate.
If `wasmtime-debug` supports other backends in the future we can
recreate a new crate, perhaps with it refactored to not depend on
Cranelift.
* Move wasmtime_environ::reference_type
This now belongs in wasmtime-cranelift and nowhere else
* Remove `Type` reexport in wasmtime-environ
One less dependency on `cranelift-codegen`!
* Remove `types` reexport from `wasmtime-environ`
Less cranelift!
* Remove `SourceLoc` from wasmtime-environ
Change the `srcloc`, `start_srcloc`, and `end_srcloc` fields to a custom
`FilePos` type instead of `ir::SourceLoc`. These are only used in a few
places so there's not much to lose from an extra abstraction for these
leaf use cases outside of cranelift.
* Remove wasmtime-environ's dep on cranelift's `StackMap`
This commit "clones" the `StackMap` data structure in to
`wasmtime-environ` to have an independent representation that that
chosen by Cranelift. This allows Wasmtime to decouple this runtime
dependency of stack map information and let the two evolve
independently, if necessary.
An alternative would be to refactor cranelift's implementation into a
separate crate and have wasmtime depend on that but it seemed a bit like
overkill to do so and easier to clone just a few lines for this.
* Define code offsets in wasmtime-environ with `u32`
Don't use Cranelift's `binemit::CodeOffset` alias to define this field
type since the `wasmtime-environ` crate will be losing the
`cranelift-codegen` dependency soon.
* Commit to using `cranelift-entity` in Wasmtime
This commit removes the reexport of `cranelift-entity` from the
`wasmtime-environ` crate and instead directly depends on the
`cranelift-entity` crate in all referencing crates. The original reason
for the reexport was to make cranelift version bumps easier since it's
less versions to change, but nowadays we have a script to do that.
Otherwise this encourages crates to use whatever they want from
`cranelift-entity` since we'll always depend on the whole crate.
It's expected that the `cranelift-entity` crate will continue to be a
lean crate in dependencies and suitable for use at both runtime and
compile time. Consequently there's no need to avoid its usage in
Wasmtime at runtime, since "remove Cranelift at compile time" is
primarily about the `cranelift-codegen` crate.
* Remove most uses of `cranelift-codegen` in `wasmtime-environ`
There's only one final use remaining, which is the reexport of
`TrapCode`, which will get handled later.
* Limit the glob-reexport of `cranelift_wasm`
This commit removes the glob reexport of `cranelift-wasm` from the
`wasmtime-environ` crate. This is intended to explicitly define what
we're reexporting and is a transitionary step to curtail the amount of
dependencies taken on `cranelift-wasm` throughout the codebase. For
example some functions used by debuginfo mapping are better imported
directly from the crate since they're Cranelift-specific. Note that
this is intended to be a temporary state affairs, soon this reexport
will be gone entirely.
Additionally this commit reduces imports from `cranelift_wasm` and also
primarily imports from `crate::wasm` within `wasmtime-environ` to get a
better sense of what's imported from where and what will need to be
shared.
* Extract types from cranelift-wasm to cranelift-wasm-types
This commit creates a new crate called `cranelift-wasm-types` and
extracts type definitions from the `cranelift-wasm` crate into this new
crate. The purpose of this crate is to be a shared definition of wasm
types that can be shared both by compilers (like Cranelift) as well as
wasm runtimes (e.g. Wasmtime). This new `cranelift-wasm-types` crate
doesn't depend on `cranelift-codegen` and is the final step in severing
the unconditional dependency from Wasmtime to `cranelift-codegen`.
The final refactoring in this commit is to then reexport this crate from
`wasmtime-environ`, delete the `cranelift-codegen` dependency, and then
update all `use` paths to point to these new types.
The main change of substance here is that the `TrapCode` enum is
mirrored from Cranelift into this `cranelift-wasm-types` crate. While
this unfortunately results in three definitions (one more which is
non-exhaustive in Wasmtime itself) it's hopefully not too onerous and
ideally something we can patch up in the future.
* Get lightbeam compiling
* Remove unnecessary dependency
* Fix compile with uffd
* Update publish script
* Fix more uffd tests
* Rename cranelift-wasm-types to wasmtime-types
This reflects the purpose a bit more where it's types specifically
intended for Wasmtime and its support.
* Fix publish script
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
* Add guard pages to the front of linear memories
This commit implements a safety feature for Wasmtime to place guard
pages before the allocation of all linear memories. Guard pages placed
after linear memories are typically present for performance (at least)
because it can help elide bounds checks. Guard pages before a linear
memory, however, are never strictly needed for performance or features.
The intention of a preceding guard page is to help insulate against bugs
in Cranelift or other code generators, such as CVE-2021-32629.
This commit adds a `Config::guard_before_linear_memory` configuration
option, defaulting to `true`, which indicates whether guard pages should
be present both before linear memories as well as afterwards. Guard
regions continue to be controlled by
`{static,dynamic}_memory_guard_size` methods.
The implementation here affects both on-demand allocated memories as
well as the pooling allocator for memories. For on-demand memories this
adjusts the size of the allocation as well as adjusts the calculations
for the base pointer of the wasm memory. For the pooling allocator this
will place a singular extra guard region at the very start of the
allocation for memories. Since linear memories in the pooling allocator
are contiguous every memory already had a preceding guard region in
memory, it was just the previous memory's guard region afterwards. Only
the first memory needed this extra guard.
I've attempted to write some tests to help test all this, but this is
all somewhat tricky to test because the settings are pretty far away
from the actual behavior. I think, though, that the tests added here
should help cover various use cases and help us have confidence in
tweaking the various `Config` settings beyond their defaults.
Note that this also contains a semantic change where
`InstanceLimits::memory_reservation_size` has been removed. Instead this
field is now inferred from the `static_memory_maximum_size` and guard
size settings. This should hopefully remove some duplication in these
settings, canonicalizing on the guard-size/static-size settings as the
way to control memory sizes and virtual reservations.
* Update config docs
* Fix a typo
* Fix benchmark
* Fix wasmtime-runtime tests
* Fix some more tests
* Try to fix uffd failing test
* Review items
* Tweak 32-bit defaults
Makes the pooling allocator a bit more reasonable by default on 32-bit
with these settings.
* Optimize `table.init` instruction and instantiation
This commit optimizes table initialization as part of instance
instantiation and also applies the same optimization to the `table.init`
instruction. One part of this commit is to remove some preexisting
duplication between instance instantiation and the `table.init`
instruction itself, after this the actual implementation of `table.init`
is optimized to effectively have fewer bounds checks in fewer places and
have a much tighter loop for instantiation.
A big fallout from this change is that memory/table initializer offsets
are now stored as `u32` instead of `usize` to remove a few casts in a
few places. This ended up requiring moving some overflow checks that
happened in parsing to later in code itself because otherwise the wrong
spec test errors are emitted during testing. I've tried to trace where
these can possibly overflow but I think that I managed to get
everything.
In a local synthetic test where an empty module with a single 80,000
element initializer this improves total instantiation time by 4x (562us
=> 141us)
* Review comments
Looking at some profiles these or their related functions were all
showing up, so this commit adds `#[inline]` to allow cross-crate
inlining by default.
* Fully support multiple returns in Wasmtime
For quite some time now Wasmtime has "supported" multiple return values,
but only in the mose bare bones ways. Up until recently you couldn't get
a typed version of functions with multiple return values, and never have
you been able to use `Func::wrap` with functions that return multiple
values. Even recently where `Func::typed` can call functions that return
multiple values it uses a double-indirection by calling a trampoline
which calls the real function.
The underlying reason for this lack of support is that cranelift's ABI
for returning multiple values is not possible to write in Rust. For
example if a wasm function returns two `i32` values there is no Rust (or
C!) function you can write to correspond to that. This commit, however
fixes that.
This commit adds two new ABIs to Cranelift: `WasmtimeSystemV` and
`WasmtimeFastcall`. The intention is that these Wasmtime-specific ABIs
match their corresponding ABI (e.g. `SystemV` or `WindowsFastcall`) for
everything *except* how multiple values are returned. For multiple
return values we simply define our own version of the ABI which Wasmtime
implements, which is that for N return values the first is returned as
if the function only returned that and the latter N-1 return values are
returned via an out-ptr that's the last parameter to the function.
These custom ABIs provides the ability for Wasmtime to bind these in
Rust meaning that `Func::wrap` can now wrap functions that return
multiple values and `Func::typed` no longer uses trampolines when
calling functions that return multiple values. Although there's lots of
internal changes there's no actual changes in the API surface area of
Wasmtime, just a few more impls of more public traits which means that
more types are supported in more places!
Another change made with this PR is a consolidation of how the ABI of
each function in a wasm module is selected. The native `SystemV` ABI,
for example, is more efficient at returning multiple values than the
wasmtime version of the ABI (since more things are in more registers).
To continue to take advantage of this Wasmtime will now classify some
functions in a wasm module with the "fast" ABI. Only functions that are
not reachable externally from the module are classified with the fast
ABI (e.g. those not exported, used in tables, or used with `ref.func`).
This should enable purely internal functions of modules to have a faster
calling convention than those which might be exposed to Wasmtime itself.
Closes#1178
* Tweak some names and add docs
* "fix" lightbeam compile
* Fix TODO with dummy environ
* Unwind info is a property of the target, not the ABI
* Remove lightbeam unused imports
* Attempt to fix arm64
* Document new ABIs aren't stable
* Fix filetests to use the right target
* Don't always do 64-bit stores with cranelift
This was overwriting upper bits when 32-bit registers were being stored
into return values, so fix the code inline to do a sized store instead
of one-size-fits-all store.
* At least get tests passing on the old backend
* Fix a typo
* Add some filetests with mixed abi calls
* Get `multi` example working
* Fix doctests on old x86 backend
* Add a mixture of wasmtime/system_v tests
* Add `anyhow` dependency to `wasmtime-runtime`.
* Revert `get_data` back to `fn`.
* Remove `DataInitializer` and box the data in `Module` translation instead.
* Improve comments on `MemoryInitialization`.
* Remove `MemoryInitialization::OutOfBounds` in favor of proper bulk memory
semantics.
* Use segmented memory initialization except for when the uffd feature is
enabled on Linux.
* Validate modules with the allocator after translation.
* Updated various functions in the runtime to return `anyhow::Result`.
* Use a slice when copying pages instead of `ptr::copy_nonoverlapping`.
* Remove unnecessary casts in `OnDemandAllocator::deallocate`.
* Better document the `uffd` feature.
* Use WebAssembly page-sized pages in the paged initialization.
* Remove the stack pool from the uffd handler and simply protect just the guard
pages.
Last minute code clean up to fix some comments and rename `address_space_size`
to `memory_reservation_size` to better describe what the option is doing.
This commit implements copying paged initialization data upon a fault of a
linear memory page.
If the initialization data is "paged", then the appropriate pages are copied
into the Wasm page (or zeroed if the page is not present in the
initialization data).
If the initialization data is not "paged", the Wasm page is zeroed so that
module instantiation can initialize the pages.
With the change to artificially limit unbounded memories based on Tunables,
it's possible to hit the assert where the minimum might exceed the static
memory bound.
This commit removes the assert in favor of a check to see if the minimum also
fits within the static memory bound. It also corrects the maximum bounding to
ensure the minimum between the memory's maximum and the configured maximum is
used.
If it does not fit, the memory will be treated as dynamic. In the case of the
pooling instance allocator, the bounds will be checked again during translation
and an appropriate error will be returned as dynamic memories are not supported
for that allocator.
This commit introduces two new methods on `InstanceAllocator`:
* `validate_module` - this method is used to validate a module after
translation but before compilation. It will be used for the upcoming pooling
allocator to ensure a module being compiled adheres to the limits of the
allocator.
* `adjust_tunables` - this method is used to adjust the `Tunables` given the
JIT compiler. The pooling allocator will use this to force all memories to
be static during compilation.
This commit refactors module instantiation in the runtime to allow for
different instance allocation strategy implementations.
It adds an `InstanceAllocator` trait with the current implementation put behind
the `OnDemandInstanceAllocator` struct.
The Wasmtime API has been updated to allow a `Config` to have an instance
allocation strategy set which will determine how instances get allocated.
This change is in preparation for an alternative *pooling* instance allocator
that can reserve all needed host process address space in advance.
This commit also makes changes to the `wasmtime_environ` crate to represent
compiled modules in a way that reduces copying at instantiation time.
This commit fully implements outer aliases of the module linking
proposal. Outer aliases can now handle multiple-level-up aliases and now
properly also handle closed-over-values of modules that are either
imported or defined.
The structure of `wasmtime::Module` was altered as part of this commit.
It is now a compiled module plus two lists of "upvars", or closed over
values used when instantiating the module. One list of upvars is
compiled artifacts which are submodules that could be used. Another is
module values that are injected via outer aliases. Serialization and
such have been updated as appropriate to handle this.
This commit updates the various tooling used by wasmtime which has new
updates to the module linking proposal. This is done primarily to sync
with WebAssembly/module-linking#26. The main change implemented here is
that wasmtime now supports creating instances from a set of values, nott
just from instantiating a module. Additionally subtyping handling of
modules with respect to imports is now properly handled by desugaring
two-level imports to imports of instances.
A number of small refactorings are included here as well, but most of
them are in accordance with the changes to `wasmparser` and the updated
binary format for module linking.
* Implement imported/exported modules/instances
This commit implements the final piece of the module linking proposal
which is to flesh out the support for importing/exporting instances and
modules. This ended up having a few changes:
* Two more `PrimaryMap` instances are now stored in an `Instance`. The value
for instances is `InstanceHandle` (pretty easy) and for modules it's
`Box<dyn Any>` (less easy).
* The custom host state for `InstanceHandle` for `wasmtime` is now
`Arc<TypeTables` to be able to fully reconstruct an instance's types
just from its instance.
* Type matching for imports now has been updated to take
instances/modules into account.
One of the main downsides of this implementation is that type matching
of imports is duplicated between wasmparser and wasmtime, leading to
posssible bugs especially in the subtelties of module linking. I'm not
sure how best to unify these two pieces of validation, however, and it
may be more trouble than it's worth.
cc #2094
* Update wat/wast/wasmparser
* Review comments
* Fix a bug in publish script to vendor the right witx
Currently there's two witx binaries in our repository given the two wasi
spec submodules, so this updates the publication script to vendor the
right one.
This commit is intended to do almost everything necessary for processing
the alias section of module linking. Most of this is internal
refactoring, the highlights being:
* Type contents are now stored separately from a `wasmtime_env::Module`.
Given that modules can freely alias types and have them used all over
the place, it seemed best to have one canonical location to type
storage which everywhere else points to (with indices). A new
`TypeTables` structure is produced during compilation which is shared
amongst all member modules in a wasm blob.
* Instantiation is heavily refactored to account for module linking. The
main gotcha here is that imports are now listed as "initializers". We
have a sort of pseudo-bytecode-interpreter which interprets the
initialization of a module. This is more complicated than just
matching imports at this point because in the module linking proposal
the module, alias, import, and instance sections may all be
interleaved. This means that imports aren't guaranteed to show up at
the beginning of the address space for modules/instances.
Otherwise most of the changes here largely fell out from these two
design points. Aliases are recorded as initializers in this scheme.
Copying around type information and/or just knowing type information
during compilation is also pretty easy since everything is just a
pointer into a `TypeTables` and we don't have to actually copy any types
themselves. Lots of various refactorings were necessary to accomodate
these changes.
Tests are hoped to cover a breadth of functionality here, but not
necessarily a depth. There's still one more piece of the module linking
proposal missing which is exporting instances/modules, which will come
in a future PR.
It's also worth nothing that there's one large TODO which isn't
implemented in this change that I plan on opening an issue for.
With module linking when a set of modules comes back from compilation
each modules has all the trampolines for the entire set of modules. This
is quite a lot of duplicate trampolines across module-linking modules.
We'll want to refactor this at some point to instead have only one set
of trampolines per set of module linking modules and have them shared
from there. I figured it was best to separate out this change, however,
since it's purely related to resource usage, and doesn't impact
non-module-linking modules at all.
cc #2094
With the module linking proposal the field name on imports is now
optional, and only the module is required to be specified. This commit
propagates this API change to the boundary of wasmtime's API, ensuring
consumers are aware of what's optional with module linking and what
isn't. Note that it's expected that all existing users will either
update accordingly or unwrap the result since module linking is
presumably disabled.
This commit adds lots of plumbing to get the type section from the
module linking proposal plumbed all the way through to the `wasmtime`
crate and the `wasmtime-c-api` crate. This isn't all that useful right
now because Wasmtime doesn't support imported/exported
modules/instances, but this is all necessary groundwork to getting that
exported at some point. I've added some light tests but I suspect the
bulk of the testing will come in a future commit.
One major change in this commit is that `SignatureIndex` no longer
follows type type index space in a wasm module. Instead a new
`TypeIndex` type is used to track that. Function signatures, still
indexed by `SignatureIndex`, are then packed together tightly.
This commit is intended to be the first of many in implementing the
module linking proposal. At this time this builds on #2059 so it
shouldn't land yet. The goal of this commit is to compile bare-bones
modules which use module linking, e.g. those with nested modules.
My hope with module linking is that almost everything in wasmtime only
needs mild refactorings to handle it. The goal is that all per-module
structures are still per-module and at the top level there's just a
`Vec` containing a bunch of modules. That's implemented currently where
`wasmtime::Module` contains `Arc<[CompiledModule]>` and an index of
which one it's pointing to. This should enable
serialization/deserialization of any module in a nested modules
scenario, no matter how you got it.
Tons of features of the module linking proposal are missing from this
commit. For example instantiation flat out doesn't work, nor does
import/export of modules or instances. That'll be coming as future
commits, but the purpose here is to start laying groundwork in Wasmtime
for handling lots of modules in lots of places.
After compilation there's actually no need to hold onto the native
signature for a wasm function type, so this commit moves out the
`ir::Signature` value from a `Module` into a separate field that's
deallocated when compilation is finished. This simplifies the
`SignatureRegistry` because it only needs to track wasm functino types
and it also means less work is done for `Func::wrap`.
This was added long ago at this point to assist with caching, but
caching has moved to a different level such that this wonky second level
of a `Module` isn't necessary. This commit removes the `ModuleLocal`
type to simplify accessors and generally make it easier to work with.
This is enough to get an `externref -> externref` identity function
passing.
However, `externref`s that are dropped by compiled Wasm code are (safely)
leaked. Follow up work will leverage cranelift's stack maps to resolve this
issue.
* Compute instance exports on demand.
Instead having instances eagerly compute a Vec of Externs, and bumping
the refcount for each Extern, compute Externs on demand.
This also enables `Instance::get_export` to avoid doing a linear search.
This also means that the closure returned by `get0` and friends now
holds an `InstanceHandle` to dynamically hold the instance live rather
than being scoped to a lifetime.
* Compute module imports and exports on demand too.
And compute Extern::ty on demand too.
* Add a utility function for computing an ExternType.
* Add a utility function for looking up a function's signature.
* Add a utility function for computing the ValType of a Global.
* Rename wasmtime_environ::Export to EntityIndex.
This helps differentiate it from other Export types in the tree, and
describes what it is.
* Fix a typo in a comment.
* Simplify module imports and exports.
* Make `Instance::exports` return the export names.
This significantly simplifies the public API, as it's relatively common
to need the names, and this avoids the need to do a zip with
`Module::exports`.
This also changes `ImportType` and `ExportType` to have public members
instead of private members and accessors, as I find that simplifies the
usage particularly in cases where there are temporary instances.
* Remove `Instance::module`.
This doesn't quite remove `Instance`'s `module` member, it gets a step
closer.
* Use a InstanceHandle utility function.
* Don't consume self in the `Func::get*` methods.
Instead, just create a closure containing the instance handle and the
export for them to call.
* Use `ExactSizeIterator` to avoid needing separate `num_*` methods.
* Rename `Extern::func()` etc. to `into_func()` etc.
* Revise examples to avoid using `nth`.
* Add convenience methods to instance for getting specific extern types.
* Use the convenience functions in more tests and examples.
* Avoid cloning strings for `ImportType` and `ExportType`.
* Remove more obviated clone() calls.
* Simplify `Func`'s closure state.
* Make wasmtime::Export's fields private.
This makes them more consistent with ExportType.
* Fix compilation error.
* Make a lifetime parameter explicit, and use better lifetime names.
Instead of 'me, use 'instance and 'module to make it clear what the
lifetime is.
* More lifetime cleanups.
* Store module name on `wasmtime_environ::Module`
This keeps all name information in one place so we dont' have to keep
extra structures around in `wasmtime::Module`.
* rustfmt
* Enable the already-passing `bulk-memoryoperations/imports.wast` test
* Implement support for the `memory.init` instruction and passive data
This adds support for passive data segments and the `memory.init` instruction
from the bulk memory operations proposal. Passive data segments are stored on
the Wasm module and then `memory.init` instructions copy their contents into
memory.
* Implement the `data.drop` instruction
This allows wasm modules to deallocate passive data segments that it doesn't
need anymore. We keep track of which segments have not been dropped on an
`Instance` and when dropping them, remove the entry from the instance's hash
map. The module always needs all of the segments for new instantiations.
* Enable final bulk memory operations spec test
This requires special casing an expected error message for an `assert_trap`,
since the expected error message contains the index of an uninitialized table
element, but our trap implementation doesn't save that diagnostic information
and shepherd it out.
* rename PassiveElemIndex to ElemIndex and same for PassiveDataIndex (#1411)
* rename PassiveDataIndex to DataIndex
* rename PassiveElemIndex to ElemIndex
* Apply renamings to wasmtime as well
* Run rustfmt
Co-authored-by: csmoe <csmoe@msn.com>
This adds support for the `table.copy` instruction from the bulk memory
proposal. It also supports multiple tables, which were introduced by the
reference types proposal.
Part of #928
