* move caching to the CompilationArtifacts
* mv cache_config from Compiler to CompiledModule
* hash isa flags
* no cache for wasm2obj
* mv caching to wasmtime crate
* account each Compiler field when hash
For host VM code, we use plain reference counting, where cloning increments
the reference count, and dropping decrements it. We can avoid many of the
on-stack increment/decrement operations that typically plague the
performance of reference counting via Rust's ownership and borrowing system.
Moving a `VMExternRef` avoids mutating its reference count, and borrowing it
either avoids the reference count increment or delays it until if/when the
`VMExternRef` is cloned.
When passing a `VMExternRef` into compiled Wasm code, we don't want to do
reference count mutations for every compiled `local.{get,set}`, nor for
every function call. Therefore, we use a variation of **deferred reference
counting**, where we only mutate reference counts when storing
`VMExternRef`s somewhere that outlives the activation: into a global or
table. Simultaneously, we over-approximate the set of `VMExternRef`s that
are inside Wasm function activations. Periodically, we walk the stack at GC
safe points, and use stack map information to precisely identify the set of
`VMExternRef`s inside Wasm activations. Then we take the difference between
this precise set and our over-approximation, and decrement the reference
count for each of the `VMExternRef`s that are in our over-approximation but
not in the precise set. Finally, the over-approximation is replaced with the
precise set.
The `VMExternRefActivationsTable` implements the over-approximized set of
`VMExternRef`s referenced by Wasm activations. Calling a Wasm function and
passing it a `VMExternRef` moves the `VMExternRef` into the table, and the
compiled Wasm function logically "borrows" the `VMExternRef` from the
table. Similarly, `global.get` and `table.get` operations clone the gotten
`VMExternRef` into the `VMExternRefActivationsTable` and then "borrow" the
reference out of the table.
When a `VMExternRef` is returned to host code from a Wasm function, the host
increments the reference count (because the reference is logically
"borrowed" from the `VMExternRefActivationsTable` and the reference count
from the table will be dropped at the next GC).
For more general information on deferred reference counting, see *An
Examination of Deferred Reference Counting and Cycle Detection* by Quinane:
https://openresearch-repository.anu.edu.au/bitstream/1885/42030/2/hon-thesis.pdf
cc #929Fixes#1804
This commit makes the following changes to unwind information generation in
Cranelift:
* Remove frame layout change implementation in favor of processing the prologue
and epilogue instructions when unwind information is requested. This also
means this work is no longer performed for Windows, which didn't utilize it.
It also helps simplify the prologue and epilogue generation code.
* Remove the unwind sink implementation that required each unwind information
to be represented in final form. For FDEs, this meant writing a
complete frame table per function, which wastes 20 bytes or so for each
function with duplicate CIEs. This also enables Cranelift users to collect the
unwind information and write it as a single frame table.
* For System V calling convention, the unwind information is no longer stored
in code memory (it's only a requirement for Windows ABI to do so). This allows
for more compact code memory for modules with a lot of functions.
* Deletes some duplicate code relating to frame table generation. Users can
now simply use gimli to create a frame table from each function's unwind
information.
Fixes#1181.
* Improve robustness of cache loading/storing
Today wasmtime incorrectly loads compiled compiled modules from the
global cache when toggling settings such as optimizations. For example
if you execute `wasmtime foo.wasm` that will cache globally an
unoptimized version of the wasm module. If you then execute `wasmtime -O
foo.wasm` it would then reload the unoptimized version from cache, not
realizing the compilation settings were different, and use that instead.
This can lead to very surprising behavior naturally!
This commit updates how the cache is managed in an attempt to make it
much more robust against these sorts of issues. This takes a leaf out of
rustc's playbook and models the cache with a function that looks like:
fn load<T: Hash>(
&self,
data: T,
compute: fn(T) -> CacheEntry,
) -> CacheEntry;
The goal here is that it guarantees that all the `data` necessary to
`compute` the result of the cache entry is hashable and stored into the
hash key entry. This was previously open-coded and manually managed
where items were hashed explicitly, but this construction guarantees
that everything reasonable `compute` could use to compile the module is
stored in `data`, which is itself hashable.
This refactoring then resulted in a few workarounds and a few fixes,
including the original issue:
* The `Module` type was split into `Module` and `ModuleLocal` where only
the latter is hashed. The previous hash function for a `Module` left
out items like the `start_func` and didn't hash items like the imports
of the module. Omitting the `start_func` was fine since compilation
didn't actually use it, but omitting imports seemed uncomfortable
because while compilation didn't use the import values it did use the
*number* of imports, which seems like it should then be put into the
cache key. The `ModuleLocal` type now derives `Hash` to guarantee that
all of its contents affect the hash key.
* The `ModuleTranslationState` from `cranelift-wasm` doesn't implement
`Hash` which means that we have a manual wrapper to work around that.
This will be fixed with an upstream implementation, since this state
affects the generated wasm code. Currently this is just a map of
signatures, which is present in `Module` anyway, so we should be good
for the time being.
* Hashing `dyn TargetIsa` was also added, where previously it was not
fully hashed. Previously only the target name was used as part of the
cache key, but crucially the flags of compilation were omitted (for
example the optimization flags). Unfortunately the trait object itself
is not hashable so we still have to manually write a wrapper to hash
it, but we likely want to add upstream some utilities to hash isa
objects into cranelift itself. For now though we can continue to add
hashed fields as necessary.
Overall the goal here was to use the compiler to expose what we're not
hashing, and then make sure we organize data and write the right code to
ensure everything is hashed, and nothing more.
* Update crates/environ/src/module.rs
Co-Authored-By: Peter Huene <peterhuene@protonmail.com>
* Fix lightbeam
* Fix compilation of tests
* Update the expected structure of the cache
* Revert "Update the expected structure of the cache"
This reverts commit 2b53fee426a4e411c313d8c1e424841ba304a9cd.
* Separate the cache dir a bit
* Add a test the cache is busted with opt levels
* rustfmt
Co-authored-by: Peter Huene <peterhuene@protonmail.com>
There's not really much reason to amortize the cost of this mtime
calculation here since it's only done with debug assertions anyway, so
let's avoid an extra dependency and just have a function do it inline.
* Remove all global state from the caching system
This commit is a continuation of an effort to remove usages of
`lazy_static!` and similar global state macros which can otherwise be
accomodated with passing objects around. Previously there was a global
cache system initialized per-process, but it was initialized in a bit of
a roundabout way and wasn't actually reachable from the `wasmtime` crate
itself. The changes here remove all global state, refactor many of the
internals in the cache system, and makes configuration possible through
the `wasmtime` crate.
Specifically some changes here are:
* Usage of `lazy_static!` and many `static` items in the cache module
have all been removed.
* Global `cache_config()`, `worker()`, and `init()` functions have all
been removed. Instead a `CacheConfig` is a "root object" which
internally owns its worker and passing around the `CacheConfig` is
required for cache usage.
* The `wasmtime::Config` structure has grown options to load and parse
cache files at runtime. Currently only loading files is supported,
although we can likely eventually support programmatically configuring
APIs as well.
* Usage of the `spin` crate has been removed and the dependency is removed.
* The internal `errors` field of `CacheConfig` is removed, instead
changing all relevant methods to return a `Result<()>` instead of
storing errors internally.
* Tests have all been updated with the new interfaces and APIs.
Functionally no real change is intended here. Usage of the `wasmtime`
CLI, for example, should still enable the cache by default.
* Fix lightbeam compilation
* Migrate back to `std::` stylistically
This commit moves away from idioms such as `alloc::` and `core::` as
imports of standard data structures and types. Instead it migrates all
crates to uniformly use `std::` for importing standard data structures
and types. This also removes the `std` and `core` features from all
crates to and removes any conditional checking for `feature = "std"`
All of this support was previously added in #407 in an effort to make
wasmtime/cranelift "`no_std` compatible". Unfortunately though this
change comes at a cost:
* The usage of `alloc` and `core` isn't idiomatic. Especially trying to
dual between types like `HashMap` from `std` as well as from
`hashbrown` causes imports to be surprising in some cases.
* Unfortunately there was no CI check that crates were `no_std`, so none
of them actually were. Many crates still imported from `std` or
depended on crates that used `std`.
It's important to note, however, that **this does not mean that wasmtime
will not run in embedded environments**. The style of the code today and
idioms aren't ready in Rust to support this degree of multiplexing and
makes it somewhat difficult to keep up with the style of `wasmtime`.
Instead it's intended that embedded runtime support will be added as
necessary. Currently only `std` is necessary to build `wasmtime`, and
platforms that natively need to execute `wasmtime` will need to use a
Rust target that supports `std`. Note though that not all of `std` needs
to be supported, but instead much of it could be configured off to
return errors, and `wasmtime` would be configured to gracefully handle
errors.
The goal of this PR is to move `wasmtime` back to idiomatic usage of
features/`std`/imports/etc and help development in the short-term.
Long-term when platform concerns arise (if any) they can be addressed by
moving back to `no_std` crates (but fixing the issues mentioned above)
or ensuring that the target in Rust has `std` available.
* Start filling out platform support doc
