I don't think this has happened in awhile but I've run a `cargo update`
as well as trimming some of the duplicate/older dependencies in
`Cargo.lock` by updating some of our immediate dependencies as well.
This patch implements, for aarch64, the following wasm SIMD extensions
i32x4.dot_i16x8_s instruction
https://github.com/WebAssembly/simd/pull/127
It also updates dependencies as follows, in order that the new instruction can
be parsed, decoded, etc:
wat to 1.0.27
wast to 26.0.1
wasmparser to 0.65.0
wasmprinter to 0.2.12
The changes are straightforward:
* new CLIF instruction `widening_pairwise_dot_product_s`
* translation from wasm into `widening_pairwise_dot_product_s`
* new AArch64 instructions `smull`, `smull2` (part of the `VecRRR` group)
* translation from `widening_pairwise_dot_product_s` to `smull ; smull2 ; addv`
There is no testcase in this commit, because that is a separate repo. The
implementation has been tested, nevertheless.
This PR updates the AArch64 ABI implementation so that it (i) properly
respects that v8-v15 inclusive have callee-save lower halves, and
caller-save upper halves, by conservatively approximating (to full
registers) in the appropriate directions when generating prologue
caller-saves and when informing the regalloc of clobbered regs across
callsites.
In order to prevent saving all of these vector registers in the prologue
of every non-leaf function due to the above approximation, this also
makes use of a new regalloc.rs feature to exclude call instructions'
writes from the clobber set returned by register allocation. This is
safe whenever the caller and callee have the same ABI (because anything
the callee could clobber, the caller is allowed to clobber as well
without saving it in the prologue).
Fixes#2254.
Given a clif function, harvest all its integer subexpressions, so that they can
be fed into [Souper](https://github.com/google/souper) as candidates for
superoptimization. For some of these candidates, Souper will successfully
synthesize a right-hand side that is equivalent but has lower cost than the
left-hand side. Then, we can combine these left- and right-hand sides into a
complete optimization, and add it to our peephole passes.
To harvest the expression that produced a given value `x`, we do a post-order
traversal of the dataflow graph starting from `x`. As we do this traversal, we
maintain a map from clif values to their translated Souper values. We stop
traversing when we reach anything that can't be translated into Souper IR: a
memory load, a float-to-int conversion, a block parameter, etc. For values
produced by these instructions, we create a Souper `var`, which is an input
variable to the optimization. For instructions that have a direct mapping into
Souper IR, we get the Souper version of each of its operands and then create the
Souper version of the instruction itself. It should now be clear why we do a
post-order traversal: we need an instruction's translated operands in order to
translate the instruction itself. Once this instruction is translated, we update
the clif-to-souper map with this new translation so that any other instruction
that uses this result as an operand has access to the translated value. When the
traversal is complete we return the translation of `x` as the root of left-hand
side candidate.
This upgrade pulls in one memory-allocation reduction improvement
(bytecodealliance/regalloc.rs#95). There should be no change in behavior
as a result of this.
This lets us avoid the cost of `cranelift_codegen::ir::Opcode` to
`peepmatic_runtime::Operator` conversion overhead, and paves the way for
allowing Peepmatic to support non-clif optimizations (e.g. vcode optimizations).
Rather than defining our own `peepmatic::Operator` type like we used to, now the
whole `peepmatic` crate is effectively generic over a `TOperator` type
parameter. For the Cranelift integration, we use `cranelift_codegen::ir::Opcode`
as the concrete type for our `TOperator` type parameter. For testing, we also
define a `TestOperator` type, so that we can test Peepmatic code without
building all of Cranelift, and we can keep them somewhat isolated from each
other.
The methods that `peepmatic::Operator` had are now translated into trait bounds
on the `TOperator` type. These traits need to be shared between all of
`peepmatic`, `peepmatic-runtime`, and `cranelift-codegen`'s Peepmatic
integration. Therefore, these new traits live in a new crate:
`peepmatic-traits`. This crate acts as a header file of sorts for shared
trait/type/macro definitions.
Additionally, the `peepmatic-runtime` crate no longer depends on the
`peepmatic-macro` procedural macro crate, which should lead to faster build
times for Cranelift when it is using pre-built peephole optimizers.
Instead, when the `rebuild-peephole-optimizers` feature is enabled, rebuild them
the first time they are used. This allows peepmatic to run when Cranelift's
`Opcode` is defined and available, which paves the way forward for:
* merging `peepmatic_runtime::operator::Operator` and Cranelift's `Opcode` (we
are wasting a bunch of cycles converting between the two of them), and
* supporting vcode optimizations in `peepmatic`.
Before this patch, running the x64 new backend would require both
compiling with --features experimental_x64 and running with
`use_new_backend`.
This patches changes this behavior so that the runtime flag is not
needed anymore: using the feature flag will enforce usage of the new
backend everywhere, making using and testing it much simpler:
cargo run --features experimental_x64 ;; other CLI options/flags
This also gives a hint at what the meta language generation would look
like after switching to the new backend.
Compiling only with the x64 codegen flag gives a nice compile time speedup.
This commit adds support for generating stackmaps at safepoints to the
new backend framework and to the AArch64 backend in particular. It has
been tested to work with SpiderMonkey.
This avoids the set uniqueness (hashing) test, reduces memory
churn when re-mapping virtual register onto real registers, and is
generally more memory-efficient.
Rather than outright replacing parts of our existing peephole optimizations
passes, this makes peepmatic an optional cargo feature that can be enabled. This
allows us to take a conservative approach with enabling peepmatic everywhere,
while also allowing us to get it in-tree and make it easier to collaborate on
improving it quickly.
This ports all of the identity, no-op, simplification, and canonicalization
related optimizations over from being hand-coded to the `peepmatic` DSL. This
does not handle the branch-to-branch optimizations or most of the
divide-by-constant optimizations.
This PR updates Cranelift to use the new version of regalloc.rs
(bytecodealliance/regalloc.rs#55) that provides dense vreg->rreg maps to
the `map_reg()` function for each instruction, rather than the earlier
hashmap-based approach.
In one test (regex-rs.wasm), this PR results in a 15% reduction in
memory allocations (1245MB -> 1060MB) as measured by DHAT on `clif-util
wasm` runs.
This change adds SourceLoc information per instruction in a `VCode<Inst>`
container, and keeps this information up-to-date across register allocation
and branch reordering. The information is initially collected during
instruction lowering, eventually collected on the MachSection, and finally
provided to the environment that wraps the codegen crate for wasmtime.
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This patch adds the MachInst, or Machine Instruction, infrastructure.
This is the machine-independent portion of the new backend design. It
contains the implementation of the "vcode" (virtual-registerized code)
container, the top-level lowering algorithm and compilation pipeline,
and the trait definitions that the machine backends will fill in.
This backend infrastructure is included in the compilation of the
`codegen` crate, but it is not yet tied into the public APIs; that patch
will come last, after all the other pieces are filled in.
This patch contains code written by Julian Seward <jseward@acm.org> and
Benjamin Bouvier <public@benj.me>, originally developed on a side-branch
before rebasing and condensing into this patch series. See the `arm64`
branch at `https://github.com/cfallin/wasmtime` for original development
history.
Co-authored-by: Julian Seward <jseward@acm.org>
Co-authored-by: Benjamin Bouvier <public@benj.me>
* Wasmtime 0.15.0 and Cranelift 0.62.0. (#1398)
* Bump more ad-hoc versions.
* Add build.rs to wasi-common's Cargo.toml.
* Update the env var name in more places.
* Remove a redundant echo.
This patch updates or removes all references to the Cranelift repository. It affects links in README documents, issues that were transferred to the Wasmtime repository, CI badges, and a small bunch of sundry items.
Update the documentation for the merger, and also for various changes in
Cranelift. Remove some old obsolete documentation, and convert the remaining
Sphinx files to Markdown. Some of the remaining content is still out of
date, but this is a step forward.
* All: Drop 'basic-blocks' feature
This makes it so that 'basic-blocks' cannot be disabled and we can
start assuming it everywhere.
* Tests: Replace non-bb filetests with bb version
* Tests: Adapt solver-fixedconflict filetests to use basic blocks
