This bumps target-lexicon and adds support for the AppleAarch64 calling
convention. Specifically for WebAssembly support, we only have to worry
about the new stack slots convention. Stack slots don't need to be at
least 8-bytes, they can be as small as the data type's size. For
instance, if we need stack slots for (i32, i32), they can be located at
offsets (+0, +4). Note that they still need to be properly aligned on
the data type they're containing, though, so if we need stack slots for
(i32, i64), we can't start the i64 slot at the +4 offset (it must start
at the +8 offset).
Added one test that was failing on the Mac M1, as well as other tests
stressing different yet similar situations.
Our previous implementation of unwind infrastructure was somewhat
complex and brittle: it parsed generated instructions in order to
reverse-engineer unwind info from prologues. It also relied on some
fragile linkage to communicate instruction-layout information that VCode
was not designed to provide.
A much simpler, more reliable, and easier-to-reason-about approach is to
embed unwind directives as pseudo-instructions in the prologue as we
generate it. That way, we can say what we mean and just emit it
directly.
The usual reasoning that leads to the reverse-engineering approach is
that metadata is hard to keep in sync across optimization passes; but
here, (i) prologues are generated at the very end of the pipeline, and
(ii) if we ever do a post-prologue-gen optimization, we can treat unwind
directives as black boxes with unknown side-effects, just as we do for
some other pseudo-instructions today.
It turns out that it was easier to just build this for both x64 and
aarch64 (since they share a factored-out ABI implementation), and wire
up the platform-specific unwind-info generation for Windows and SystemV.
Now we have simpler unwind on all platforms and we can delete the old
unwind infra as soon as we remove the old backend.
There were a few consequences to supporting Fastcall unwind in
particular that led to a refactor of the common ABI. Windows only
supports naming clobbered-register save locations within 240 bytes of
the frame-pointer register, whatever one chooses that to be (RSP or
RBP). We had previously saved clobbers below the fixed frame (and below
nominal-SP). The 240-byte range has to include the old RBP too, so we're
forced to place clobbers at the top of the frame, just below saved
RBP/RIP. This is fine; we always keep a frame pointer anyway because we
use it to refer to stack args. It does mean that offsets of fixed-frame
slots (spillslots, stackslots) from RBP are no longer known before we do
regalloc, so if we ever want to index these off of RBP rather than
nominal-SP because we add support for `alloca` (dynamic frame growth),
then we'll need a "nominal-BP" mode that is resolved after regalloc and
clobber-save code is generated. I added a comment to this effect in
`abi_impl.rs`.
The above refactor touched both x64 and aarch64 because of shared code.
This had a further effect in that the old aarch64 prologue generation
subtracted from `sp` once to allocate space, then used stores to `[sp,
offset]` to save clobbers. Unfortunately the offset only has 7-bit
range, so if there are enough clobbered registers (and there can be --
aarch64 has 384 bytes of registers; at least one unit test hits this)
the stores/loads will be out-of-range. I really don't want to synthesize
large-offset sequences here; better to go back to the simpler
pre-index/post-index `stp r1, r2, [sp, #-16]` form that works just like
a "push". It's likely not much worse microarchitecturally (dependence
chain on SP, but oh well) and it actually saves an instruction if
there's no other frame to allocate. As a further advantage, it's much
simpler to understand; simpler is usually better.
This PR adds the new backend on Windows to CI as well.
This adds support for the "fastcall" ABI, which is the native C/C++ ABI
on Windows platforms on x86-64. It is similar to but not exactly like
System V; primarily, its argument register assignments are different,
and it requires stack shadow space.
Note that this also adjusts the handling of multi-register values in the
shared ABI implementation, and with this change, adjusts handling of
`i128`s on *both* Fastcall/x64 *and* SysV/x64 platforms. This was done
to align with actual behavior by the "rustc ABI" on both platforms, as
mapped out experimentally (Compiler Explorer link in comments). This
behavior is gated under the `enable_llvm_abi_extensions` flag.
Note also that this does *not* add x64 unwind info on Windows. That will
come in a future PR (but is planned!).
The StructReturn ABI is fairly simple at the codegen/isel level: we only
need to take care to return the sret pointer as one of the return values
if that wasn't specified in the initial function signature.
Struct arguments are a little more complex. A struct argument is stored
as a chunk of memory in the stack-args space. However, the CLIF
semantics are slightly special: on the caller side, the parameter passed
in is a pointer to an arbitrary memory block, and we must memcpy this
data to the on-stack struct-argument; and on the callee side, we provide
a pointer to the passed-in struct-argument as the CLIF block param
value.
This is necessary to support various ABIs other than Wasm, such as that
of Rust (with the cg_clif codegen backend).
This implements all of the ops on I128 that are implemented by the
legacy x86 backend, and includes all that are required by at least one
major use-case (cg_clif rustc backend).
The sequences are open-coded where necessary; for e.g. the bit
operations, this can be somewhat complex, but these sequences have been
tested carefully. This PR also includes a drive-by fix of clz/ctz for 8-
and 16-bit cases where they were incorrect previously.
Also includes ridealong fixes developed while bringing up cg_clif
support, because they are difficult to completely separate due to
other refactors that occurred in this PR:
- fix REX prefix logic for some 8-bit instructions.
When using an 8-bit register in 64-bit mode on x86-64, the REX prefix
semantics are somewhat subtle: without the REX prefix, register numbers
4--7 correspond to the second-to-lowest byte of the first four registers
(AH, CH, BH, DH), whereas with the REX prefix, these register numbers
correspond to the usual encoding (SPL, BPL, SIL, DIL). We could always
emit a REX byte for instructions with 8-bit cases (this is harmless even
if unneeded), but this would unnecessarily inflate code size; instead,
the usual approach is to emit it only for these registers.
This logic was present in some cases but missing for some other
instructions: divide, not, negate, shifts.
Fixes#2508.
- avoid unaligned SSE loads on some f64 ops.
The implementations of several FP ops, such as fabs/fneg, used SSE
instructions. This is not a problem per-se, except that load-op merging
did not take *alignment* into account. Specifically, if an op on an f64
loaded from memory happened to merge that load, and the instruction into
which it was merged was an SSE instruction, then the SSE instruction
imposes stricter (128-bit) alignment requirements than the load.f64 did.
This PR simply forces any instruction lowerings that could use SSE
instructions to implement non-SIMD operations to take inputs in
registers only, and avoid load-op merging.
Fixes#2507.
- two bugfixes exposed by cg_clif: urem/srem.i8, select.b1.
- urem/srem.i8: the 8-bit form of the DIV instruction on x86-64 places
the remainder in AH, not RDX, different from all the other width-forms
of this instruction.
- select.b1: we were not recognizing selects of boolean values as
integer-typed operations, so we were generating XMM moves instead (!).
This will allow for support for `I128` values everywhere, and `I64`
values on 32-bit targets (e.g., ARM32 and x86-32). It does not alter the
machine backends to build such support; it just adds the framework for
the MachInst backends to *reason* about a `Value` residing in more than
one register.
Lucet uses stack probes rather than explicit stack limit checks as
Wasmtime does. In bytecodealliance/lucet#616, I have discovered that I
previously was not running some Lucet runtime tests with the new
backend, so was missing some test failures due to missing pieces in the
new backend.
This PR adds (i) calls to probestack, when enabled, in the prologue of
every function with a stack frame larger than one page (configurable via
flags); and (ii) trap metadata for every instruction on x86-64 that can
access the stack, hence be the first point at which a stack overflow is
detected when the stack pointer is decremented.
This end result was previously enacted by carrying a `SourceLoc` on
every load/store, which was somewhat cumbersome, and only indirectly
encoded metadata about a memory reference (can it trap) by its presence
or absence. We have a type for this -- `MemFlags` -- that tells us
everything we might want to know about a load or store, and we should
plumb it through to code emission instead.
This PR attaches a `MemFlags` to an `Amode` on x64, and puts it on load
and store `Inst` variants on aarch64. These two choices seem to factor
things out in the nicest way: there are relatively few load/store insts
on aarch64 but many addressing modes, while the opposite is true on x64.
In existing MachInst backends, many instructions -- any that can trap or
result in a relocation -- carry `SourceLoc` values in order to propagate
the location-in-original-source to use to describe resulting traps or
relocation errors.
This is quite tedious, and also error-prone: it is likely that the
necessary plumbing will be missed in some cases, and in any case, it's
unnecessarily verbose.
This PR factors out the `SourceLoc` handling so that it is tracked
during emission as part of the `EmitState`, and plumbed through
automatically by the machine-independent framework. Instruction emission
code that directly emits trap or relocation records can query the
current location as necessary. Then we only need to ensure that memory
references and trap instructions, at their (one) emission point rather
than their (many) lowering/generation points, are wired up correctly.
This does have the side-effect that some loads and stores that do not
correspond directly to user code's heap accesses will have unnecessary
but harmless trap metadata. For example, the load that fetches a code
offset from a jump table will have a 'heap out of bounds' trap record
attached to it; but because it is bounds-checked, and will never
actually trap if the lowering is correct, this should be harmless. The
simplicity improvement here seemed more worthwhile to me than plumbing
through a "corresponds to user-level load/store" bit, because the latter
is a bit complex when we allow for op merging.
Closes#2290: though it does not implement a full "metadata" scheme as
described in that issue, this seems simpler overall.
There has been some confusion over the meaning of the "sign-extend"
(`sext`) and "zero-extend" (`uext`) attributes on parameters and return
values in signatures. According to the three implemented backends, these
attributes indicate that a value narrower than a full register should
always be extended in the way specified. However, they are much more
useful if they mean "extend in this way if the ABI requires extending":
only the ABI backend knows whether or not a particular ABI (e.g., x64
SysV vs. x64 Baldrdash) requires extensions, while only the frontend
(CLIF generator) knows whether or not a value is signed, so the two have
to work in concert.
This is the result of some very helpful discussion in #2354 (thanks to
@uweigand for raising the issue and @bjorn3 for helping to reason about
it).
This change respects the extension attributes in the above way, rather
than unconditionally extending, to avoid potential performance
degradation as we introduce more extension attributes on signatures.
When performing a function call, the platform ABI may require space
on the stack to hold outgoing arguments and/or return values.
Currently, this is supported via decrementing the stack pointer
before the call and incrementing it afterwards, using the
emit_stack_pre_adjust and emit_stack_post_adjust methods of
ABICaller. However, on some platforms it would be preferable
to just allocate enough space for any call done in the function
in the caller's prologue instead.
This patch adds support to allow back-ends to choose that method.
Instead of calling emit_stack_pre/post_adjust around a call, they
simply call a new accumulate_outgoing_args_size method of
ABICaller instead. This will pass on the required size to the
ABICallee structure of the calling function, which will accumulate
the maximum size required for all function calls.
That accumulated size is then passed to the gen_clobber_save
and gen_clobber_restore functions so they can include the size
in the stack allocation / deallocation that already happens in
the prologue / epilogue code.
The ABI common code currently passes the fixed frame size to
the gen_clobber_save back-end routine, which is required to
emit code to allocate the required stack space in the prologue.
Similarly, the back-end needs to emit code to de-allocate the
stack in the epilogue. However, at this point the back-end
does not have access to that fixed frame size value any more.
With targets that use a frame pointer, this does not matter,
since de-allocation can be done simply by assigning the frame
pointer back to the stack pointer. However, on targets that
do not use a frame pointer, the frame size is required.
To allow back-ends that option, this patch changes ABI common
code to pass the fixed frame size to get_clobber_restore as
well (the same value as is passed to get_clobber_save).
The common gen_prologue code currently assumes that the stack
pointer has to be aligned to twice the word size. While this
is true for many ABIs, it does not hold universally.
This patch adds a new callback stack_align that back-ends can
provide to define the specific stack alignment required by the
ABI on that platform.
This PR updates the AArch64 ABI implementation so that it (i) properly
respects that v8-v15 inclusive have callee-save lower halves, and
caller-save upper halves, by conservatively approximating (to full
registers) in the appropriate directions when generating prologue
caller-saves and when informing the regalloc of clobbered regs across
callsites.
In order to prevent saving all of these vector registers in the prologue
of every non-leaf function due to the above approximation, this also
makes use of a new regalloc.rs feature to exclude call instructions'
writes from the clobber set returned by register allocation. This is
safe whenever the caller and callee have the same ABI (because anything
the callee could clobber, the caller is allowed to clobber as well
without saving it in the prologue).
Fixes#2254.
This also passes `fixed_frame_storage_size` (previously `total_sp_adjust`)
into `gen_clobber_save` so that it can be combined with other stack
adjustments.
Copyright (c) 2020, Arm Limited.
As part of a Wasm JIT update, SpiderMonkey is changing its internal
WebAssembly function ABI. The new ABI's frame format includes "caller
TLS" and "callee TLS" slots. The details of where these come from are
not important; from Cranelift's point of view, the only relevant
requirement is that we have two on-stack args that are always present
(offsetting other on-stack args), and that we define special argument
purposes so that we can supply values for these slots.
Note that this adds a *new* ABI (a variant of the Baldrdash ABI) because
we do not want to tightly couple the landing of this PR to the landing
of the changes in SpiderMonkey; it's better if both the old and new
behavior remain available in Cranelift, so SpiderMonkey can continue to
vendor Cranelift even if it does not land (or backs out) the ABI change.
Furthermore, note that this needs to be a Cranelift-level change (i.e.
cannot be done purely from the translator environment implementation)
because the special TLS arguments must always go on the stack, which
would not otherwise happen with the usual argument-placement logic; and
there is no primitive to push a value directly in CLIF code (the notion
of a stack frame is a lower-level concept).
This commit adds arm32 code generation for some IR insts.
Floating-point instructions are not supported, because regalloc
does not allow to represent overlapping register classes,
which are needed by VFP/Neon.
There is also no support for big-endianness, I64 and I128 types.
Previously, in #2128, we factored out a common "vanilla 64-bit ABI"
implementation from the AArch64 ABI code, with the idea that this should
be largely compatible with x64. This PR alters the new x64 backend to
make use of the shared infrastructure, removing the duplication that
existed previously. The generated code is nearly (not exactly) the same;
the only difference relates to how the clobber-save region is padded in
the prologue.
This also changes some register allocations in the aarch64 code because
call support in the shared ABI infra now passes a temp vreg in, rather
than requiring use of a fixed, non-allocable temp; tests have been
updated, and the runtime behavior is unchanged.
This change primarily adds the ability to lower packed `[move|load|store]` instructions (the vector types were previously unimplemented), but with the addition of the utility `Inst::[move|load|store]` functions it became possible to remove duplicated code (e.g. `stack_load` and `stack_store`) and use these utility functions elsewhere (though not exhaustively).
This change is a pure refactoring--no change to functionality. It removes `use crate::ir::types::*` imports and uses instead `types::I32`, e.g., throughout the x64 code. Though it increases code verbosity, this change makes it more clear where the type identifiers come from (they are generated by `cranelif-codegen-meta` so without a prefix it is difficult to find their origin), avoids IDE confusion (e.g. CLion flags the un-prefixed identifiers as errors), and avoids importing unwanted identifiers into the namespace.
This change is a pure refactoring--no change to functionality. It removes newlines between the `use ...` statements in the x64 backend so that rustfmt can format them according to its convention. I noticed some files had followed a manual convention but subsequent additions did not seem to fit; this change fixes that and lightly coalesces some of the occurrences of `use a::b; use a::c;` into `use::{b, c}`.
In the Baldrdash (SpiderMonkey) embedding, we must take care to
zero-extend all function arguments to callees in integer registers when
the types are narrower than 64 bits. This is because, unlike the native
SysV ABI, the Baldrdash ABI expects high bits to be cleared. Not doing
so leads to difficult-to-trace errors where high bits falsely tag an
int32 as e.g. an object pointer, leading to potential security issues.
This commit adds support for generating stackmaps at safepoints to the
new backend framework and to the AArch64 backend in particular. It has
been tested to work with SpiderMonkey.
Removes unneeded data structure that was holding instructions for
xmm based move instructions. These instructions can should be categorized
as rm not just r. This change is intended to simplify organization and
cases when lowering.
