* riscv64: Remove unused code
* riscv64: Add vector types
* riscv64: Initial Vector ABI Load/Stores
* riscv64: Vector Loads/Stores
* riscv64: Fix `vsetvli` encoding error
* riscv64: Add SIMD `iadd` runtests
* riscv64: Rename `VecSew`
The SEW name is correct, but only for VType. We also use this type
in loads/stores as the Efective Element Width, so the name isn't
quite correct in that case.
* ci: Add V extension to RISC-V QEMU
* riscv64: Misc Cleanups
* riscv64: Check V extension in `load`/`store` for SIMD
* riscv64: Fix `sumop` doc comment
* cranelift: Fix comment typo
* riscv64: Add convert for VType and VecElementWidth
* riscv64: Remove VecElementWidth converter
* Add a `MachBuffer::defer_trap` method
This commit adds a new method to `MachBuffer` to defer trap opcodes to
the end of a function in a similar manner to how constants are deferred
to the end of the function. This is useful for backends which frequently
use `TrapIf`-style opcodes. Currently a jump is emitted which skips the
next instruction, a trap, and then execution continues normally. While
there isn't any pressing problem with this construction the trap opcode
is in the middle of the instruction stream as opposed to "off on the
side" despite rarely being taken.
With this method in place all the backends (except riscv64 since I
couldn't figure it out easily enough) have a new lowering of their
`TrapIf` opcode. Now a trap is deferred, which returns a label, and then
that label is jumped to when executing the trap. A fixup is then
recorded in `MachBuffer` to get patched later on during emission, or at
the end of the function. Subsequently all `TrapIf` instructions
translate to a single branch plus a single trap at the end of the
function.
I've additionally further updated some more lowerings in the x64 backend
which were explicitly using traps to instead use `TrapIf` where
applicable to avoid jumping over traps mid-function. Other backends
didn't appear to have many jump-over-the-next-trap patterns.
Lots of tests have had their expectations updated here which should
reflect all the traps being sunk to the end of functions.
* Print trap code on all platforms
* Emit traps before constants
* Preserve source location information for traps
* Fix test expectations
* Attempt to fix s390x
The MachBuffer was registering trap codes with the first byte of the
trap, but the SIGILL handler was expecting it to be registered with the
last byte of the trap. Exploit that SIGILL is always represented with a
2-byte instruction and always march 2-backwards for SIGILL, continuing
to march backwards 1 byte for SIGFPE-generating instructions.
* Back out s390x changes
* Back out more s390x bits
* Review comments
* Enable the native target by default in winch
Match cranelift-codegen's build script where if no architecture is
explicitly enabled then the host architecture is implicitly enabled.
* Refactor Cranelift's ISA builder to share more with Winch
This commit refactors the `Builder` type to have a type parameter
representing the finished ISA with Cranelift and Winch having their own
typedefs for `Builder` to represent their own builders. The intention is
to use this shared functionality to produce more shared code between the
two codegen backends.
* Moving compiler shared components to a separate crate
* Restore native flag inference in compiler building
This fixes an oversight from the previous commits to use
`cranelift-native` to infer flags for the native host when using default
settings with Wasmtime.
* Move `Compiler::page_size_align` into wasmtime-environ
The `cranelift-codegen` crate doesn't need this and winch wants the same
implementation, so shuffle it around so everyone has access to it.
* Fill out `Compiler::{flags, isa_flags}` for Winch
These are easy enough to plumb through with some shared code for
Wasmtime.
* Plumb the `is_branch_protection_enabled` flag for Winch
Just forwarding an isa-specific setting accessor.
* Moving executable creation to shared compiler crate
* Adding builder back in and removing from shared crate
* Refactoring the shared pieces for the `CompilerBuilder`
I decided to move a couple things around from Alex's initial changes.
Instead of having the shared builder do everything, I went back to
having each compiler have a distinct builder implementation. I
refactored most of the flag setting logic into a single shared location,
so we can still reduce the amount of code duplication.
With them being separate, we don't need to maintain things like
`LinkOpts` which Winch doesn't currently use. We also have an avenue to
error when certain flags are sent to Winch if we don't support them. I'm
hoping this will make things more maintainable as we build out Winch.
I'm still unsure about keeping everything shared in a single crate
(`cranelift_shared`). It's starting to feel like this crate is doing too
much, which makes it difficult to name. There does seem to be a need for
two distinct abstraction: creating the final executable and the handling
of shared/ISA flags when building the compiler. I could make them into
two separate crates, but there doesn't seem to be enough there yet to
justify it.
* Documentation updates, and renaming the finish method
* Adding back in a default temporarily to pass tests, and removing some unused imports
* Fixing winch tests with wrong method name
* Removing unused imports from codegen shared crate
* Apply documentation formatting updates
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
* Adding back in cranelift_native flag inferring
* Adding new shared crate to publish list
* Adding write feature to pass cargo check
---------
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
* fix issue5884.
* fix issue5884
* fix test failure
* fix atomic rmw missing move result to dst register.
* specify little endian some s390x can pass test.
Remove the lower_br_fcmp function from the riscv64 backend. This PR only affects the emit implementation for FloatRound, replacing the uses of lower_br_fcmp with direct uses of FpuRRR and CondBr.
Any changes in behavior here should be already covered by the runtests for ceil, floor, trunc, and nearest.
Remove the MInst::TrapFf instruction in the riscv64 backend. It was only used in two places in the emit case for FloatRound, and was easily replaced with a combination of FpuRRR and TrapIf.
Rework the compilation of fcmp in the riscv64 backend to be in ISLE, removing the need for the dedicated Fcmp instruction. This change is motivated by #5500, which showed that the riscv64 backend was generating branch instructions in the middle of a basic block.
We can't remove lower_br_fcmp quite yet as it's used in a few places in the emit module, but it's now no longer reachable from the ISLE lowerings.
Fixes#5500
We had a off-by-one bounds check error when checking if we should
jump to the default block in a br-table. Instead of always jumping
to the default block when we have a jump table with 0 targets we
would try to compute an offset past the end of the table.
This sometimes would not crash, but it would crash if the there was
no block after the br_table, thus adding a cold block would cause a
segfault.
The actual fix is quite simple, do not count the default block
as a jump table entry when computing the limits.
This commit also does a bunch of cleanup and adding some comments
to the br_table emission code.
Assert that we never see real registers as arguments to move instructions in VCodeBuilder::collect_operands.
Also fix a bug in the riscv64 backend that was discovered by these assertions: the lowerings of get_stack_pointer and get_frame_pointer were using physical registers 8 and 2 directly. The solution was similar to other backends: add a move instruction specifically for moving out of physical registers, whose source operand is opaque to regalloc2.
* aarch64: constant generation cleanup
Add support for MOVZ and MOVN generation via ISLE.
Handle f32const, f64const, and nop instructions via ISLE.
No longer call Inst::gen_constant from lower.rs.
* riscv64: constant generation cleanup
Handle f32const, f64const, and nop instructions via ISLE.
* s390x: constant generation cleanup
Fix rule priorities for "imm" term.
Only handle 32-bit stack offsets; no longer use load_constant64.
* x64: constant generation cleanup
No longer call Inst::gen_constant from lower.rs or abi.rs.
* Refactor LowerBackend::lower to return InstOutput
No longer write to the per-insn output registers; instead, return
an InstOutput vector of temp registers holding the outputs.
This will allow calling LowerBackend::lower multiple times for
the same instruction, e.g. to rematerialize constants.
When emitting the primary copy of the instruction during lowering,
writing to the per-insn registers is now done in lower_clif_block.
As a result, the ISLE lower_common routine is no longer needed.
In addition, the InsnOutput type and all code related to it
can be removed as well.
* Refactor IsleContext to hold a LowerBackend reference
Remove the "triple", "flags", and "isa_flags" fields that are
copied from LowerBackend to each IsleContext, and instead just
hold a reference to LowerBackend in IsleContext.
This will allow calling LowerBackend::lower from within callbacks
in src/machinst/isle.rs, e.g. to rematerialize constants.
To avoid having to pass LowerBackend references through multiple
functions, eliminate the lower_insn_to_regs subroutines in those
targets that still have them, and just inline into the main
lower routine. This also eliminates lower_inst.rs on aarch64
and riscv64.
Replace all accesses to the removed IsleContext fields by going
through the LowerBackend reference.
* Remove MachInst::gen_constant
This addresses the problem described in issue
https://github.com/bytecodealliance/wasmtime/issues/4426
that targets currently have to duplicate code to emit
constants between the ISLE logic and the gen_constant
callback.
After the various cleanups in earlier patches in this series,
the only remaining user of get_constant is put_value_in_regs
in Lower. This can now be removed, and instead constant
rematerialization can be performed in the put_in_regs ISLE
callback by simply directly calling LowerBackend::lower
on the instruction defining the constant (using a different
output register).
Since the check for egraph mode is now no longer performed in
put_value_in_regs, the Lower::flags member becomes obsolete.
Care needs to be taken that other calls directly to the
Lower::put_value_in_regs routine now handle the fact that
no more rematerialization is performed. All such calls in
target code already historically handle constants themselves.
The remaining call site in the ISLE gen_call_common helper
can be redirected to the ISLE put_in_regs callback.
The existing target implementations of gen_constant are then
unused and can be removed. (In some target there may still
be further opportunities to remove duplication between ISLE
and some local Rust code - this can be left to future patches.)
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
Enable regalloc2's SSA verifier in debug builds to check for any outstanding reuse of virtual registers in def constraints. As fuzzing enables debug_assertions, this will enable the SSA verifier when fuzzing as well.
This PR fixes two bugs in the riscv64 backend, where branch instructions were emitted in the middle of a basic block:
Constant emission, where the constants are inlined into the vcode and are jumped over at runtime,
The BrTableCheck pseudo-instruction, which was always emitted before a BrTable instruction, and would handle jumping to the default label.
The first bug was resolved by introducing two new psuedo instructions, LoadConst32 and LoadConst64. Both of these instructions serve to delay the original encoding to emission time, after regalloc2 has run.
The second bug was fixed by removing the BrTableCheck instruction. As it was always emitted directly before BrTable, it was easier to remove it and merge the two into a single instruction.
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Replace resize+copy_from_slice with extend_from_slice
Vec::resize initializes the new space, which is wasted effort if we're
just going to call `copy_from_slice` on it immediately afterward. Using
`extend_from_slice` is simpler, and very slightly faster.
If the new size were bigger than the buffer we're copying from, then it
would make sense to initialize the excess. But it isn't: it's always
exactly the same size.
* Move helpers from Context to CompiledCode
These methods only use information from Context::compiled_code, so they
should live on CompiledCode instead.
* Remove an unnecessary #[cfg_attr]
There are other uses of `#[allow(clippy::too_many_arguments)]` in this
file, so apparently it doesn't need to be guarded by the "cargo-clippy"
feature.
* Fix a few comments
Two of these were wrong/misleading:
- `FunctionBuilder::new` does not clear the provided func_ctx. It does
debug-assert that the context is already clear, but I don't think
that's worth a comment.
- `switch_to_block` does not "create values for the arguments." That's
done by the combination of `append_block_params_for_function_params`
and `declare_wasm_parameters`.
* wasmtime-cranelift: Misc cleanups
The main change is to use the `CompiledCode` reference we already had
instead of getting it out of `Context` repeatedly. This removes a bunch
of `unwrap()` calls.
* wasmtime-cranelift: Factor out uncached compile
