* Support shadowing in isle
* Re-run the isle build.rs if the examples change
* Print error messages when isle tests fail
* Move run tests
* Refactor `let` uses that don't need to introduce unique names
This enables more runtests to be executed on s390x. Doing so
uncovered a two back-end bugs, which are fixed as well:
- The result of cls was always off by one.
- The result of popcnt.i16 has uninitialized high bits.
In addition, I found a bug in the load-op-store.clif test case:
v3 = heap_addr.i64 heap0, v1, 4
v4 = iconst.i64 42
store.i32 v4, v3
This was clearly intended to perform a 32-bit store, but
actually performs a 64-bit store (it seems the type annotation
of the store opcode is ignored, and the type of the operand
is used instead). That bug did not show any noticable symptoms
on little-endian architectures, but broke on big-endian.
This adds full support for all Cranelift SIMD instructions
to the s390x target. Everything is matched fully via ISLE.
In addition to adding support for many new instructions,
and the lower.isle code to match all SIMD IR patterns,
this patch also adds ABI support for vector types.
In particular, we now need to handle the fact that
vector registers 8 .. 15 are partially callee-saved,
i.e. the high parts of those registers (which correspond
to the old floating-poing registers) are callee-saved,
but the low parts are not. This is the exact same situation
that we already have on AArch64, and so this patch uses the
same solution (the is_included_in_clobbers callback).
The bulk of the changes are platform-specific, but there are
a few exceptions:
- Added ISLE extractors for the Immediate and Constant types,
to enable matching the vconst and swizzle instructions.
- Added a missing accessor for call_conv to ABISig.
- Fixed endian conversion for vector types in data_value.rs
to enable their use in runtests on the big-endian platforms.
- Enabled (nearly) all SIMD runtests on s390x. [ Two test cases
remain disabled due to vector shift count semantics, see below. ]
- Enabled all Wasmtime SIMD tests on s390x.
There are three minor issues, called out via FIXMEs below,
which should be addressed in the future, but should not be
blockers to getting this patch merged. I've opened the
following issues to track them:
- Vector shift count semantics
https://github.com/bytecodealliance/wasmtime/issues/4424
- is_included_in_clobbers vs. link register
https://github.com/bytecodealliance/wasmtime/issues/4425
- gen_constant callback
https://github.com/bytecodealliance/wasmtime/issues/4426
All tests, including all newly enabled SIMD tests, pass
on both z14 and z15 architectures.
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
This defines the full set of 32 128-bit vector registers on s390x.
(Note that the VRs overlap the existing FPRs.) In addition, this
adds support to use all 32 vector registers to implement floating-
point operations, by using vector floating-point instructions with
the 'W' bit set to operate only on the first element.
This part of the vector instruction set mostly matches the old FP
instruction set, with two exceptions:
- There is no vector version of the COPY SIGN instruction. Instead,
now use a VECTOR SELECT with an appropriate bit mask to implement
the fcopysign operation.
- There are no vector version of the float <-> int conversion
instructions where source and target differ in bit size. Use
appropriate multiple conversion steps instead. This also requires
use of explicit checking to implement correct overflow handling.
As a side effect, this version now also implements the i8 / i16
variants of all conversions, which had been missing so far.
For all operations except those two above, we continue to use the
old FP instruction if applicable (i.e. if all operands happen to
have been allocated to the original FP register set), and use the
vector instruction otherwise.
This adds infrastructure to allow implementing call and return
instructions in ISLE, and migrates the s390x back-end.
To implement ABI details, this patch creates public accessors
for `ABISig` and makes them accessible in ISLE. All actual
code generation is then done in ISLE rules, following the
information provided by that signature.
[ Note that the s390x back end never requires multiple slots for
a single argument - the infrastructure to handle this should
already be present, however. ]
To implement loops in ISLE rules, this patch uses regular tail
recursion, employing a `Range` data structure holding a range
of integers to be looped over.
Current codegen had a number of logic errors confusing
NAND with AND WITH COMPLEMENT, and NOR with OR WITH COMPLEMENT.
Add support for the missing z15 instructions and fix logic.
This PR removes "argument polarity": the feature of ISLE extractors that lets them take
inputs aside from the value to be matched.
Cases that need this expressivity have been subsumed by #4072 with if-let clauses;
we can now finally remove this misfeature of the language, which has caused significant
confusion and has always felt like a bit of a hack.
This PR (i) removes the feature from the ISLE compiler; (ii) removes it from the reference
documentation; and (iii) refactors away all uses of the feature in our three existing
backends written in ISLE.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
This changes the output of the `lower` constructor from a
`ValueRegs` to a new `InstOutput` type, which is a vector
of `ValueRegs`.
Code in `lower_common` is updated to use this new type to
handle instructions with multiple outputs. All back-ends
are updated to use the new type.
This PR makes use of the new implicit-conversion feature of the ISLE DSL
that was introduced in #3807 in order to make the lowering rules
significantly simpler and more concise.
The basic idea is to eliminate the repetitive and mechanical use of
terms that convert from one type to another when there is only one real
way to do the conversion -- for example, to go from a `WritableReg` to a
`Reg`, the only sensible way is to use `writable_reg_to_reg`.
This PR generally takes any term of the form "A_to_B" and makes it an
automatic conversion, as well as some others that are similar in spirit.
The notable exception to the pure-value-convsion category is the
`put_in_reg` family of operations, which actually do have side-effects.
However, as noted in the doc additions in #3807, this is fine as long as
the side-effects are idempotent. And on balance, making `put_in_reg`
automatic is a significant clarity win -- together with other operand
converters, it enables rules like:
```
;; Add two registers.
(rule (lower (has_type (fits_in_64 ty)
(iadd x y)))
(add ty x y))
```
There may be other converters that we could define to make the rules
even simpler; we can make such improvements as we think of them, but
this should be a good start!
* x64: port `select` using an FP comparison to ISLE
This change includes quite a few interlocking parts, required mainly by
the current x64 conventions in ISLE:
- it adds a way to emit a `cmove` with multiple OR-ing conditions;
because x64 ISLE cannot currently safely emit a comparison followed
by several jumps, this adds `MachInst::CmoveOr` and
`MachInst::XmmCmoveOr` macro instructions. Unfortunately, these macro
instructions hide the multi-instruction sequence in `lower.isle`
- to properly keep track of what instructions consume and produce
flags, @cfallin added a way to pass around variants of
`ConsumesFlags` and `ProducesFlags`--these changes affect all
backends
- then, to lower the `fcmp + select` CLIF, this change adds several
`cmove*_from_values` helpers that perform all of the awkward
conversions between `Value`, `ValueReg`, `Reg`, and `Gpr/Xmm`; one
upside is that now these lowerings have much-improved documentation
explaining why the various `FloatCC` and `CC` choices are made the
the way they are.
Co-authored-by: Chris Fallin <chris@cfallin.org>
Add accessors to prelude.isle to access data fields of
`func_addr` and `symbol_value` instructions.
These are based on similar versions I had added to the s390x
back-end, but are a bit more straightforward to use.
- func_ref_data: Extract SigRef, ExternalName, and RelocDistance
fields given a FuncRef.
- symbol_value_data: Extract ExternalName, RelocDistance, and
offset fields given a GlobalValue representing a Symbol.
- reloc_distance_near: Test for RelocDistance::Near.
The s390x back-end is changed to use these common versions.
Note that this exposed a bug in common isle code: This extractor:
(extractor (load_sym inst)
(and inst
(load _ (def_inst (symbol_value
(symbol_value_data _
(reloc_distance_near) offset)))
(i64_from_offset
(memarg_symbol_offset_sum <offset _)))))
would raise an assertion in sema.rs due to a supposed cycle in
extractor definitions. But there was no actual cycle, it was
simply that the extractor tree refers twice to the `insn_data`
extractor (once via the `load` and once via the `symbol_value`
extractor). Fixed by checking for pre-existing definitions only
along one path in the tree, not across the whole tree.
This adds support for all atomic operations that were unimplemented
so far in the s390x back end:
- atomic_rmw operations xchg, nand, smin, smax, umin, umax
- $I8 and $I16 versions of atomic_rmw and atomic_cas
- little endian versions of atomic_rmw and atomic_cas
All of these have to be implemented by a compare-and-swap loop;
and for the $I8 and $I16 versions the actual atomic instruction
needs to operate on the surrounding aligned 32-bit word.
Since we cannot emit new control flow during ISLE instruction
selection, these compare-and-swap loops are emitted as a single
meta-instruction to be expanded at emit time.
However, since there is a large number of different versions of
the loop required to implement all the above operations, I've
implemented a facility to allow specifying the loop bodies
from within ISLE after all, by creating a vector of MInst
structures that will be emitted as part of the meta-instruction.
There are still restrictions, in particular instructions that
are part of the loop body may not modify any virtual register.
But even so, this approach looks preferable to doing everything
in emit.rs.
A few instructions needed in those compare-and-swap loop bodies
were added as well, in particular the RxSBG family of instructions
as well as the LOAD REVERSED in-register byte-swap instructions.
This patch also adds filetest runtests to verify the semantics
of all operations, in particular the subword and little-endian
variants (those are currently only executed on s390x).
In order to migrate branches to ISLE, we define a second entry
point `lower_branch` which gets the list of branch targets as
additional argument.
This requires a small change to `lower_common`: the `isle_lower`
callback argument is changed from a function pointer to a closure.
This allows passing the extra argument via a closure.
Traps make use of the recently added facility to emit safepoints
from ISLE, but are otherwise straightforward.
This adds ISLE support for the s390x back-end and moves lowering
of most instructions to ISLE. The only instructions still remaining
are calls, returns, traps, and branches, most of which will need
additional support in common code.
Generated code is not intended to be (significantly) different
than before; any additional optimizations now made easier to
implement due to the ISLE layer can be added in follow-on patches.
There were a few differences in some filetests, but those are all
just simple register allocation changes (and all to the better!).
