* aarch64: Add `shuffle` lowerings for the `uzp{1,2}` instructions
This commit uses the same style of patterns in the x64 backend to start
adding specific lowerings of the Cranelift `shuffle` instruction to
particular AArch64 instructions.
* aarch64: Add `shuffle` lowerings to the `zip{1,2}` instructions
These instructions match the `punpck*` family of instructions on x64 and
should help provide more efficient lowerings than the current `shuffle`
fallback.
* aarch64: Add `shuffle` lowerings for `trn{1,2}`
Along the lines of prior commits adds specific patterns to lowering for
individual AArch64 instructions available.
* aarch64: Add a `shuffle` lowering for the `ext` instruction
This instruction will more-or-less concatenate two 128-bit vector
registers to create a 256-bit value, shift it right, and then take the
lower 128-bits into the destination. This can be modeled with a
`shuffle` of consecutive bytes so this adds a lowering rule to generate
this instruction.
* aarch64: Add `shuffle` special case for `dup`
This commit adds special cases for Cranelift's `shuffle` on AArch64 when
the lowering can be represented with a `dup` instruction which
broadcasts one vector's lane into all lanes of the destination.
* aarch64: Add `shuffle` specializations for `rev` instructions
This commit adds shuffle mask specializations for the `rev{16,32,64}`
family of instructions on AArch64 which can be used to reverse bytes,
16-bit values, or 32-bit values within larger values.
* Fix tests
* Add doc-comments in ISLE
This commit adds lowerings to the AArch64 backend for the `fmls`
instruction which is intended to be leveraged in the relaxed-simd
proposal for WebAssembly. This should hopefully allow for a
teeny-bit-more efficient codegen for this operator instead of using the
`fmla` instruction plus a negation instruction.
* cranelift: Add `adrp` encoding to AArch64 backend
* cranelift: Support GOT Symbol References in AArch64
* cranelift: Add MachO GOT relocations
* cranelift: Do not mark the GOT PageOffset12 MachO relocation as relative
* aarch64: constant generation cleanup
Add support for MOVZ and MOVN generation via ISLE.
Handle f32const, f64const, and nop instructions via ISLE.
No longer call Inst::gen_constant from lower.rs.
* riscv64: constant generation cleanup
Handle f32const, f64const, and nop instructions via ISLE.
* s390x: constant generation cleanup
Fix rule priorities for "imm" term.
Only handle 32-bit stack offsets; no longer use load_constant64.
* x64: constant generation cleanup
No longer call Inst::gen_constant from lower.rs or abi.rs.
* Refactor LowerBackend::lower to return InstOutput
No longer write to the per-insn output registers; instead, return
an InstOutput vector of temp registers holding the outputs.
This will allow calling LowerBackend::lower multiple times for
the same instruction, e.g. to rematerialize constants.
When emitting the primary copy of the instruction during lowering,
writing to the per-insn registers is now done in lower_clif_block.
As a result, the ISLE lower_common routine is no longer needed.
In addition, the InsnOutput type and all code related to it
can be removed as well.
* Refactor IsleContext to hold a LowerBackend reference
Remove the "triple", "flags", and "isa_flags" fields that are
copied from LowerBackend to each IsleContext, and instead just
hold a reference to LowerBackend in IsleContext.
This will allow calling LowerBackend::lower from within callbacks
in src/machinst/isle.rs, e.g. to rematerialize constants.
To avoid having to pass LowerBackend references through multiple
functions, eliminate the lower_insn_to_regs subroutines in those
targets that still have them, and just inline into the main
lower routine. This also eliminates lower_inst.rs on aarch64
and riscv64.
Replace all accesses to the removed IsleContext fields by going
through the LowerBackend reference.
* Remove MachInst::gen_constant
This addresses the problem described in issue
https://github.com/bytecodealliance/wasmtime/issues/4426
that targets currently have to duplicate code to emit
constants between the ISLE logic and the gen_constant
callback.
After the various cleanups in earlier patches in this series,
the only remaining user of get_constant is put_value_in_regs
in Lower. This can now be removed, and instead constant
rematerialization can be performed in the put_in_regs ISLE
callback by simply directly calling LowerBackend::lower
on the instruction defining the constant (using a different
output register).
Since the check for egraph mode is now no longer performed in
put_value_in_regs, the Lower::flags member becomes obsolete.
Care needs to be taken that other calls directly to the
Lower::put_value_in_regs routine now handle the fact that
no more rematerialization is performed. All such calls in
target code already historically handle constants themselves.
The remaining call site in the ISLE gen_call_common helper
can be redirected to the ISLE put_in_regs callback.
The existing target implementations of gen_constant are then
unused and can be removed. (In some target there may still
be further opportunities to remove duplication between ISLE
and some local Rust code - this can be left to future patches.)
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
Enable regalloc2's SSA verifier in debug builds to check for any outstanding reuse of virtual registers in def constraints. As fuzzing enables debug_assertions, this will enable the SSA verifier when fuzzing as well.
As loading constants on aarch64 can take up to 4 instructions, we need to plumb through some additional registers. Rather than pass a fixed list of registers in, pass an allocation function.
* Turn off probestack by default in Cranelift
The probestack feature is not implemented for the aarch64 and s390x
backends and currently the on-by-default status requires the aarch64 and
s390x implementations to be a stub. Turning off probestack by default
allows the s390x and aarch64 backends to panic with an error message to
avoid providing a false sense of security. When the probestack option is
implemented for all backends, however, it may be reasonable to
re-enable.
* aarch64: Improve codegen for AMode fallback
Currently the final fallback for finalizing an `AMode` will generate
both a constant-loading instruction as well as an `add` instruction to
the base register into the same temporary. This commit improves the
codegen by removing the `add` instruction and folding the final add into
the finalized `AMode`. This changes the `extendop` used but both
registers are 64-bit so shouldn't be affected by the extending
operation.
* aarch64: Implement inline stack probes
This commit implements inline stack probes for the aarch64 backend in
Cranelift. The support here is modeled after the x64 support where
unrolled probes are used up to a particular threshold after which a loop
is generated. The instructions here are similar in spirit to x64 except
that unlike x64 the stack pointer isn't modified during the unrolled
loop to avoid needing to re-adjust it back up at the end of the loop.
* Enable inline probestack for AArch64 and Riscv64
This commit enables inline probestacks for the AArch64 and Riscv64
architectures in the same manner that x86_64 has it enabled now. Some
more testing was additionally added since on Unix platforms we should be
guaranteed that Rust's stack overflow message is now printed too.
* Enable probestack for aarch64 in cranelift-fuzzgen
* Address review comments
* Remove implicit stack overflow traps from x64 backend
This commit removes implicit `StackOverflow` traps inserted by the x64
backend for stack-based operations. This was historically required when
stack overflow was detected with page faults but Wasmtime no longer
requires that since it's not suitable for wasm modules which call host
functions. Additionally no other backend implements this form of
implicit trap-code additions so this is intended to synchronize the
behavior of all the backends.
This fixes a test added prior for aarch64 to properly abort the process
instead of accidentally being caught by Wasmtime.
* Fix a style issue
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Cranelift: use regalloc2 constraints on caller side of ABI code.
This PR updates the shared ABI code and backends to use register-operand
constraints rather than explicit pinned-vreg moves for register
arguments and return values.
The s390x backend was not updated, because it has its own implementation
of ABI code. Ideally we could converge back to the code shared by x64
and aarch64 (which didn't exist when s390x ported calls to ISLE, so the
current situation is underestandable, to be clear!). I'll leave this for
future work.
This PR exposed several places where regalloc2 needed to be a bit more
flexible with constraints; it requires regalloc2#74 to be merged and
pulled in.
* Update to regalloc2 0.3.3.
In addition to version bump, this required removing two asserts as
`SpillSlot`s no longer carry their class (so we can't assert that they
have the correct class).
* Review comments.
* Filetest updates.
* Add cargo-vet audit for regalloc2 0.3.2 -> 0.3.3 upgrade.
* Update to regalloc2 0.4.0.
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
* Initial forward-edge CFI implementation
Give the user the option to start all basic blocks that are targets
of indirect branches with the BTI instruction introduced by the
Branch Target Identification extension to the Arm instruction set
architecture.
Copyright (c) 2022, Arm Limited.
* Refactor `from_artifacts` to avoid second `make_executable` (#1)
This involves "parsing" twice but this is parsing just the header of an
ELF file so it's not a very intensive operation and should be ok to do
twice.
* Address the code review feedback
Copyright (c) 2022, Arm Limited.
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Previously the implementations of the various atomic memory IR operations
ignored the memory operation flags that were passed.
Copyright (c) 2022, Arm Limited.
Co-authored-by: Chris Fallin <chris@cfallin.org>
This PR removes all uses of modify-operands in the aarch64 backend,
replacing them with reused-input operands instead. This has the nice
effect of removing a bunch of move instructions and more clearly
representing inputs and outputs.
This PR also removes the explicit use of pinned vregs in the aarch64
backend, instead using fixed-register constraints on the operands when
insts or pseudo-inst sequences require certain registers.
This is the second PR in the regalloc-semantics cleanup series; after
the remaining backend (s390x) and the ABI code are cleaned up as well,
we'll be able to simplify the regalloc2 frontend.
* Port `Fcopysign`..``FcvtToSintSat` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `Fcopysign`
- Also introduced missing support for `fcopysign` on vector values, as
per the docs.
- This introduces the vector encoding for the `SLI` machine
instruction.
- `FcvtToUint`
- `FcvtToSint`
- `FcvtFromUint`
- `FcvtFromSint`
- `FcvtToUintSat`
- `FcvtToSintSat`
Copyright (c) 2022 Arm Limited
* Document helpers and abstract conversion checks
Ported the existing implementations of the following opcodes for AArch64
to ISLE, and implemented support for 64-bit vectors (per the docs):
- `SwidenLow`
- `SwidenHigh`
- `UwidenLow`
- `UwidenHigh`
Also ported `WideningPairwiseDotProductS` as-is.
Copyright (c) 2022 Arm Limited
Also, adjust the tests that are executed on that platform. Finally,
fix a bug with obtaining backtraces when back-edge CFI is enabled.
Copyright (c) 2022, Arm Limited.
* Cranelift: Remove `ABICallee` trait
It has only one implementation: the `ABICalleeImpl` struct. By using that
directly we can avoid unnecessary layers of generics and abstractions as well as
a couple `Box`es that were previously putting the single implementation into a
`Box<dyn>`.
* Cranelift: Rename `ABICalleeImpl` to `AbiCallee`
* Fix comments as per review
* Rename `AbiCallee` to `Callee`
This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested by @cfallin (thanks!) in Cranelift, and trait object to provide a backend for an all-included experience in Wasmtime.
After the suggestion of Chris, `Function` has been split into mostly two parts:
- on the one hand, `FunctionStencil` contains all the fields required during compilation, and that act as a compilation cache key: if two function stencils are the same, then the result of their compilation (`CompiledCodeBase<Stencil>`) will be the same. This makes caching trivial, as the only thing to cache is the `FunctionStencil`.
- on the other hand, `FunctionParameters` contain the... function parameters that are required to finalize the result of compilation into a `CompiledCode` (aka `CompiledCodeBase<Final>`) with proper final relocations etc., by applying fixups and so on.
Most changes are here to accomodate those requirements, in particular that `FunctionStencil` should be `Hash`able to be used as a key in the cache:
- most source locations are now relative to a base source location in the function, and as such they're encoded as `RelSourceLoc` in the `FunctionStencil`. This required changes so that there's no need to explicitly mark a `SourceLoc` as the base source location, it's automatically detected instead the first time a non-default `SourceLoc` is set.
- user-defined external names in the `FunctionStencil` (aka before this patch `ExternalName::User { namespace, index }`) are now references into an external table of `UserExternalNameRef -> UserExternalName`, present in the `FunctionParameters`, and must be explicitly declared using `Function::declare_imported_user_function`.
- some refactorings have been made for function names:
- `ExternalName` was used as the type for a `Function`'s name; while it thus allowed `ExternalName::Libcall` in this place, this would have been quite confusing to use it there. Instead, a new enum `UserFuncName` is introduced for this name, that's either a user-defined function name (the above `UserExternalName`) or a test case name.
- The future of `ExternalName` is likely to become a full reference into the `FunctionParameters`'s mapping, instead of being "either a handle for user-defined external names, or the thing itself for other variants". I'm running out of time to do this, and this is not trivial as it implies touching ISLE which I'm less familiar with.
The cache computes a sha256 hash of the `FunctionStencil`, and uses this as the cache key. No equality check (using `PartialEq`) is performed in addition to the hash being the same, as we hope that this is sufficient data to avoid collisions.
A basic fuzz target has been introduced that tries to do the bare minimum:
- check that a function successfully compiled and cached will be also successfully reloaded from the cache, and returns the exact same function.
- check that a trivial modification in the external mapping of `UserExternalNameRef -> UserExternalName` hits the cache, and that other modifications don't hit the cache.
- This last check is less efficient and less likely to happen, so probably should be rethought a bit.
Thanks to both @alexcrichton and @cfallin for your very useful feedback on Zulip.
Some numbers show that for a large wasm module we're using internally, this is a 20% compile-time speedup, because so many `FunctionStencil`s are the same, even within a single module. For a group of modules that have a lot of code in common, we get hit rates up to 70% when they're used together. When a single function changes in a wasm module, every other function is reloaded; that's still slower than I expect (between 10% and 50% of the overall compile time), so there's likely room for improvement.
Fixes#4155.
Separates the following opcodes for AArch64 into a separate `VecALUModOp` enum,
which is emitted via the `VecRRRMod` instruction. This separates vector ALU
instructions which modify a register from instructions which write to a new register:
- `Bsl`
- `Fmla`
Addresses [a discussion](https://github.com/bytecodealliance/wasmtime/pull/4608#discussion_r937975581) in #4608.
Copyright (c) 2022 Arm Limited
* Convert `fma`, `valltrue` & `vanytrue` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `fma`
- Introduced missing support for `fma` on vector values, as per the
docs.
- `valltrue`
- `vanytrue`
Also fixed `fcmp` on scalar values in the interpreter, and enabled
interpreter tests in `simd-fma.clif`.
This introduces the `FMLA` machine instruction.
Copyright (c) 2022 Arm Limited
* Add comments for `Fmla` and `Bsl`
Copyright (c) 2022 Arm Limited
Give the user the option to sign and to authenticate function
return addresses with the operations introduced by the Pointer
Authentication extension to the Arm instruction set architecture.
Copyright (c) 2021, Arm Limited.
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
* [AArch64] Port SIMD narrowing to ISLE
Fvdemote, snarrow, unarrow and uunarrow.
Also refactor the aarch64 instructions descriptions to parameterize
on ScalarSize instead of using different opcodes.
The zero_value pure constructor has been introduced and used by the
integer narrow operations and it replaces, and extends, the compare
zero patterns.
Copright (c) 2022, Arm Limited.
* use short 'if' patterns
* Implement `iabs` in ISLE (AArch64)
Converts the existing implementation of `iabs` for AArch64 into ISLE,
and fixes support for `iabs` on scalar values.
Copyright (c) 2022 Arm Limited.
* Improve scalar `iabs` implementation.
Also introduces `CSNeg` instruction.
Copyright (c) 2022 Arm Limited
Introduce a new concept in the IR that allows a producer to create
dynamic vector types. An IR function can now contain global value(s)
that represent a dynamic scaling factor, for a given fixed-width
vector type. A dynamic type is then created by 'multiplying' the
corresponding global value with a fixed-width type. These new types
can be used just like the existing types and the type system has a
set of hard-coded dynamic types, such as I32X4XN, which the user
defined types map onto. The dynamic types are also used explicitly
to create dynamic stack slots, which have no set size like their
existing counterparts. New IR instructions are added to access these
new stack entities.
Currently, during codegen, the dynamic scaling factor has to be
lowered to a constant so the dynamic slots do eventually have a
compile-time known size, as do spill slots.
The current lowering for aarch64 just targets Neon, using a dynamic
scale of 1.
Copyright (c) 2022, Arm Limited.
- Handle call instructions' clobbers with the clobbers API, using RA2's
clobbers bitmask (bytecodealliance/regalloc2#58) rather than clobbers
list;
- Pull in changes from bytecodealliance/regalloc2#59 for much more sane
edge-case behavior w.r.t. liverange splitting.
* Narrow `allow(dead_code)` declarations
Having module wide `allow(dead_code)` may hide some code that's really
dead. In this commit I just narrowed the declarations to the specific
enum variants that were not used (as it seems reasonable to keep them
and their handling in all the matches, for future use). And the compiler
found more dead code that I think we can remove safely in the short
term.
With this, the only files annotated with a module-wide
`allow(dead_code)` are isle-generated files.
* resurrect some functions as test helpers
Also fix and extend the current implementation:
- AtomicRMWOp::Clr != AtomicRmwOp::And, as the input needs to be
inverted first.
- Inputs to the cmp for the RMWLoop case are sign-extended when
needed.
- Lower Xchg to Swp.
- Lower Sub to Add with a negated input.
- Added more runtests.
Copyright (c) 2022, Arm Limited.
Previously, the block successor accumulation and the blockparam branch
arg setup were decoupled. The lowering backend implicitly specified
the order of successor edges via its `MachTerminator` enum on the last
instruction in the block, while the `Lower` toplevel
machine-independent driver set up blockparam branch args in the edge
order seen in CLIF.
In some cases, these orders did not match -- for example, when the
conditional branch depended on an FP condition that was implemented by
swapping taken/not-taken edges and inverting the condition code.
This PR refactors the successor handling to be centralized in `Lower`
rather than flow through the terminator `MachInst`, and adds a
successor block and its blockparam args at the same time, ensuring the
orders match.
Merge Mov32 and Mov64 into a single instruction parameterized by a new
OperandSize field. Also combine the Mov[K,N,Z] into a single instruction
with a new opcode to select between the operations.
Copyright (c) 2022, Arm Limited.
