This instruction has a single instruction lowering in AVX512F/VL and a three instruction lowering in AVX but neither is currently supported in the x64 backend. To implement this, we instead subtract the vector from 0 and use a blending instruction to pick the lanes containing the absolute value.
If an instruction has more than one trap record associated with it (for
example: a divide instruction that has participated in load-op fusion,
so we have both a heap-out-of-bounds trap record due to its load and a
divide-by-zero trap record due to its divide op), the current MachBuffer
code would emit only one of the trap records to the sink.
Separately, divide instructions probably shouldn't merge loads, because
the two separate possible traps at one location might be confusing for
some embedders (certainly in Lucet). Divide seems to be the only case in
our current codegen where such merging might occur. This PR changes the
lowering to always force the divisor into a register.
Finally, while working out why trap records were not appearing, I had
noticed that `isa::x64::emit_std_enc_mem()` was only emitting heap-OOB
trap metadata for loads/stores when it had a srcloc. This PR ensures
that the metadata is emitted even when the srcloc is empty.
Note that none of the above presents a security or correctness problem;
trap metadata only affects the status that we return to the embedder
when a Wasm program terminates with a trap.
This fixes#2672 and #2679, and also fixes an incorrect instruction
emission (`test` with small immediate) that we had missed earlier.
The shift-related fixes have to do with (i) shifts by 0 bits, as a
special case that must be handled; and (ii) shifts by a 128-bit amount,
which we can handle by just dropping the upper half (we only use 3--7
bits of shift amount).
This adjusts the lowerings appropriately, and also adds run-tests to
ensure that the lowerings actually execute correctly (previously we only
had compile-tests with golden lowerings; I'd like to correct this for
more ops eventually, adding run-tests beyond what the Wasm spec and
frontend covers).
This unifies the logic around Rex prefix emission and hopefully makes REX prefix errors less likely.
There are still several instructions that use other sources to determine the flags, so set_w and clear_w are left as is.
Additional cleanups:
* Change always_emit_if_8bit_needed to take a Reg instead of a u8 for type safety.
* Deduplicated emission code in MovRM.
This is in preparation for refactoring all x64::Inst arms to use OperandSize.
Current uses of OperandSize fall into two categories:
1. XMM operations which require 32/64 bit operands
2. Immediates which only care about 64-bit or not.
Adds assertions to existing Inst constructors to check that they are passed valid sizes.
This change also removes the implicit widening of 1 and 2 byte values to 4 bytes. from_bytes() is only used by category 2, so removing this behavior will not change any visible behavior.
Overall this change should be a no-op.
This PR propagates "value labels" all the way from CLIF to DWARF
metadata on the emitted machine code. The key idea is as follows:
- Translate value-label metadata on the input into "value_label"
pseudo-instructions when lowering into VCode. These
pseudo-instructions take a register as input, denote a value label,
and semantically are like a "move into value label" -- i.e., they
update the current value (as seen by debugging tools) of the given
local. These pseudo-instructions emit no machine code.
- Perform a dataflow analysis *at the machine-code level*, tracking
value-labels that propagate into registers and into [SP+constant]
stack storage. This is a forward dataflow fixpoint analysis where each
storage location can contain a *set* of value labels, and each value
label can reside in a *set* of storage locations. (Meet function is
pairwise intersection by storage location.)
This analysis traces value labels symbolically through loads and
stores and reg-to-reg moves, so it will naturally handle spills and
reloads without knowing anything special about them.
- When this analysis converges, we have, at each machine-code offset, a
mapping from value labels to some number of storage locations; for
each offset for each label, we choose the best location (prefer
registers). Note that we can choose any location, as the symbolic
dataflow analysis is sound and guarantees that the value at the
value_label instruction propagates to all of the named locations.
- Then we can convert this mapping into a format that the DWARF
generation code (wasmtime's debug crate) can use.
This PR also adds the new-backend variant to the gdb tests on CI.
This follows the implementation in the legacy x86 backend, including
hardcoded sequence that is compatible with what the linker expects. We
could potentially do better here, but it is likely not necessary.
Thanks to @bjorn3 for a bugfix to an earlier version of this.
This implements all of the ops on I128 that are implemented by the
legacy x86 backend, and includes all that are required by at least one
major use-case (cg_clif rustc backend).
The sequences are open-coded where necessary; for e.g. the bit
operations, this can be somewhat complex, but these sequences have been
tested carefully. This PR also includes a drive-by fix of clz/ctz for 8-
and 16-bit cases where they were incorrect previously.
Also includes ridealong fixes developed while bringing up cg_clif
support, because they are difficult to completely separate due to
other refactors that occurred in this PR:
- fix REX prefix logic for some 8-bit instructions.
When using an 8-bit register in 64-bit mode on x86-64, the REX prefix
semantics are somewhat subtle: without the REX prefix, register numbers
4--7 correspond to the second-to-lowest byte of the first four registers
(AH, CH, BH, DH), whereas with the REX prefix, these register numbers
correspond to the usual encoding (SPL, BPL, SIL, DIL). We could always
emit a REX byte for instructions with 8-bit cases (this is harmless even
if unneeded), but this would unnecessarily inflate code size; instead,
the usual approach is to emit it only for these registers.
This logic was present in some cases but missing for some other
instructions: divide, not, negate, shifts.
Fixes#2508.
- avoid unaligned SSE loads on some f64 ops.
The implementations of several FP ops, such as fabs/fneg, used SSE
instructions. This is not a problem per-se, except that load-op merging
did not take *alignment* into account. Specifically, if an op on an f64
loaded from memory happened to merge that load, and the instruction into
which it was merged was an SSE instruction, then the SSE instruction
imposes stricter (128-bit) alignment requirements than the load.f64 did.
This PR simply forces any instruction lowerings that could use SSE
instructions to implement non-SIMD operations to take inputs in
registers only, and avoid load-op merging.
Fixes#2507.
- two bugfixes exposed by cg_clif: urem/srem.i8, select.b1.
- urem/srem.i8: the 8-bit form of the DIV instruction on x86-64 places
the remainder in AH, not RDX, different from all the other width-forms
of this instruction.
- select.b1: we were not recognizing selects of boolean values as
integer-typed operations, so we were generating XMM moves instead (!).
Previously, `select` and `brz`/`brnz` instructions, when given a `b1`
boolean argument, would test whether that boolean argument was nonzero,
rather than whether its LSB was nonzero. Since our invariant for mapping
CLIF state to machine state is that bits beyond the width of a value are
undefined, the proper lowering is to test only the LSB.
(aarch64 does not have the same issue because its `Extend` pseudoinst
already properly handles masking of b1 values when a zero-extend is
requested, as it is for select/brz/brnz.)
Found by Nathan Ringo on Zulip [1] (thanks!).
[1]
https://bytecodealliance.zulipchat.com/#narrow/stream/217117-cranelift/topic/bnot.20on.20b1s
Lucet uses stack probes rather than explicit stack limit checks as
Wasmtime does. In bytecodealliance/lucet#616, I have discovered that I
previously was not running some Lucet runtime tests with the new
backend, so was missing some test failures due to missing pieces in the
new backend.
This PR adds (i) calls to probestack, when enabled, in the prologue of
every function with a stack frame larger than one page (configurable via
flags); and (ii) trap metadata for every instruction on x86-64 that can
access the stack, hence be the first point at which a stack overflow is
detected when the stack pointer is decremented.
This end result was previously enacted by carrying a `SourceLoc` on
every load/store, which was somewhat cumbersome, and only indirectly
encoded metadata about a memory reference (can it trap) by its presence
or absence. We have a type for this -- `MemFlags` -- that tells us
everything we might want to know about a load or store, and we should
plumb it through to code emission instead.
This PR attaches a `MemFlags` to an `Amode` on x64, and puts it on load
and store `Inst` variants on aarch64. These two choices seem to factor
things out in the nicest way: there are relatively few load/store insts
on aarch64 but many addressing modes, while the opposite is true on x64.
In existing MachInst backends, many instructions -- any that can trap or
result in a relocation -- carry `SourceLoc` values in order to propagate
the location-in-original-source to use to describe resulting traps or
relocation errors.
This is quite tedious, and also error-prone: it is likely that the
necessary plumbing will be missed in some cases, and in any case, it's
unnecessarily verbose.
This PR factors out the `SourceLoc` handling so that it is tracked
during emission as part of the `EmitState`, and plumbed through
automatically by the machine-independent framework. Instruction emission
code that directly emits trap or relocation records can query the
current location as necessary. Then we only need to ensure that memory
references and trap instructions, at their (one) emission point rather
than their (many) lowering/generation points, are wired up correctly.
This does have the side-effect that some loads and stores that do not
correspond directly to user code's heap accesses will have unnecessary
but harmless trap metadata. For example, the load that fetches a code
offset from a jump table will have a 'heap out of bounds' trap record
attached to it; but because it is bounds-checked, and will never
actually trap if the lowering is correct, this should be harmless. The
simplicity improvement here seemed more worthwhile to me than plumbing
through a "corresponds to user-level load/store" bit, because the latter
is a bit complex when we allow for op merging.
Closes#2290: though it does not implement a full "metadata" scheme as
described in that issue, this seems simpler overall.
This approach suffers from memory-size bloat during compile time due to the desire to de-duplicate the constants emitted and reduce runtime memory-size. As a first step, though, this provides an end-to-end mechanism for constants to be emitted in the MachBuffer islands.
In order to register traps for `load_splat`, several instruction formats need knowledge of `SourceLoc`s; however, since the x64 backend does not correctly and completely register traps for `RegMem::Mem` variants I opened https://github.com/bytecodealliance/wasmtime/issues/2290 to discuss and resolve this issue. In the meantime, the current behavior (i.e. remaining largely unaware of `SourceLoc`s) is retained.
A new associated type Info is added to MachInstEmit, which is the
immutable counterpart to State. It can't easily be constructed from an
ABICallee, since it would require adding an associated type to the
latter, and making so leaks the associated type in a lot of places in
the code base and makes the code harder to read. Instead, the EmitInfo
state can simply be passed to the `Vcode::emit` function directly.
This approach is not the best but avoids an extra instruction; perhaps at some point, as mentioned in https://github.com/bytecodealliance/wasmtime/pull/2248, we will add the extra instruction or refactor things in such a way that this `Inst` variant is unnecessary.
