This commit is intended to update wasmparser to 0.59.0. This primarily
includes bytecodealliance/wasm-tools#40 which is a large update to how
parsing and validation works. The impact on Wasmtime is pretty small at
this time, but over time I'd like to refactor the internals here to lean
more heavily on that upstream wasmparser refactoring.
For now, though, the intention is to get on the train of wasmparser's
latest `main` branch to ensure we get bug fixes and such.
As part of this update a few other crates and such were updated. This is
primarily to handle the new encoding of `ref.is_null` where the type is
not part of the instruction encoding any more.
In order to make it more clear what the incoming types are for this translation (e.g. two `I32X4`s narrow to an `I16X8`), this change explicitly sets the type to which to bitcast (if necessary) the incoming values.
These instructions have fast, inline JIT paths for the common cases, and only
call out to host VM functions for the slow paths. This required some changes to
`cranelift-wasm`'s `FuncEnvironment`: instead of taking a `FuncCursor` to insert
an instruction sequence within the current basic block,
`FuncEnvironment::translate_table_{get,set}` now take a `&mut FunctionBuilder`
so that they can create whole new basic blocks. This is necessary for
implementing GC read/write barriers that involve branching (e.g. checking for
null, or whether a store buffer is at capacity).
Furthermore, it required that the `load`, `load_complex`, and `store`
instructions handle loading and storing through an `r{32,64}` rather than just
`i{32,64}` addresses. This involved making `r{32,64}` types acceptable
instantiations of the `iAddr` type variable, plus a few new instruction
encodings.
Part of #929
* Allow different Cranelift IR types to be used for different Wasm reference
types.
* Do not assume that all Wasm reference types are always a Cranelift IR
reference type. For example, `funcref`s might not need GC in some
implementations, and can therefore be represented with a pointer rather than a
reference type.
This serves two purposes:
1. It ensures that we call `get_or_create_table` to ensure that the embedder
already had a chance to create the given table (although this is mostly
redundant due to validation).
2. It allows the embedder to easily get the `ir::TableData` associated with this
table, and more easily emit whatever inline JIT code to translate the table
instruction (rather than falling back to VM calls).
About half of the `FuncEnvironment::translate_table_*` methods were using the
`TableIndex` newtype, while the other half were using raw `u32`s. This commit
makes everything use `TableIndex`.
The InsertLane format has an ordering (`value().imm().value()`) and immediate name (`"lane"`) that make it awkward to use for other instructions. This changes the ordering (`value().value().imm()`) and uses the default name (`"imm"`) throughout the codebase.
* Ensure GlobalSet on vectors are cast to Cranelift's I8X16 type
This is a fix related to the decision to use Cranelift's I8X16 type to represent Wasm's V128--it requires casting to maintain type correctness. See https://github.com/bytecodealliance/wasmtime/issues/1147.
* Enable SIMD spec test: simd_lane.wast
Previously, the logic was wrong on two counts:
- It used the bits of the entire vector (e.g. i32x4 -> 128) instead of just the lane bits (e.g. i32x4 -> 32).
- It used the type of the first operand before it was bitcast to its correct type. Remember that, by default, vectors are handed around as i8x16 and we must bitcast them to their correct type for Cranelift's verifier; see https://github.com/bytecodealliance/wasmtime/issues/1147 for discussion on this. This fix simply uses the type of the instruction itself, which is equivalent and hopefully less fragile to any changes.
* Expose memory-related options in `Config`
This commit was initially motivated by looking more into #1501, but it
ended up balooning a bit after finding a few issues. The high-level
items in this commit are:
* New configuration options via `wasmtime::Config` are exposed to
configure the tunable limits of how memories are allocated and such.
* The `MemoryCreator` trait has been updated to accurately reflect the
required allocation characteristics that JIT code expects.
* A bug has been fixed in the cranelift wasm code generation where if no
guard page was present bounds checks weren't accurately performed.
The new `Config` methods allow tuning the memory allocation
characteristics of wasmtime. Currently 64-bit platforms will reserve 6GB
chunks of memory for each linear memory, but by tweaking various config
options you can change how this is allocate, perhaps at the cost of
slower JIT code since it needs more bounds checks. The methods are
intended to be pretty thoroughly documented as to the effect they have
on the JIT code and what values you may wish to select. These new
methods have been added to the spectest fuzzer to ensure that various
configuration values for these methods don't affect correctness.
The `MemoryCreator` trait previously only allocated memories with a
`MemoryType`, but this didn't actually reflect the guarantees that JIT
code expected. JIT code is generated with an assumption about the
minimum size of the guard region, as well as whether memory is static or
dynamic (whether the base pointer can be relocated). These properties
must be upheld by custom allocation engines for JIT code to perform
correctly, so extra parameters have been added to
`MemoryCreator::new_memory` to reflect this.
Finally the fuzzing with `Config` turned up an issue where if no guard
pages present the wasm code wouldn't correctly bounds-check memory
accesses. The issue here was that with a guard page we only need to
bounds-check the first byte of access, but without a guard page we need
to bounds-check the last byte of access. This meant that the code
generation needed to account for the size of the memory operation
(load/store) and use this as the offset-to-check in the no-guard-page
scenario. I've attempted to make the various comments in cranelift a bit
more exhaustive too to hopefully make it a bit clearer for future
readers!
Closes#1501
* Review comments
* Update a comment
Previously, `extractlane` results did not have the expected `uextend` because this work was completed by PEXTRB in x86. Since other architectures may eventually need this and since leaving the `uextend` out leaves the extracted values with the wrong type (`i16` instead of `i32`), the `uextend` is re-added. The duplicated zero-extension work (from PEXTRB and MOVZX) could be fixed by a later optimization.
The operands of these bitwise instructions could have different types and still be valid Wasm (i.e. `v128`). Because of this, we must tell Cranelift to cast both operands to the same type--the default type, in this case. This undoes the work merged in https://github.com/bytecodealliance/cranelift/pull/1233.
Because the smallest Wasm scalar type is i32, users of the `i8x16.replace_lane` and `i16x8.replace_lane` instructions will only be able to pass `i32` values as operands. These values must be reduced by dropping the upper bits (see https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#replace-lane-value) using Cranelift's `ireduce` instruction.
Because Wasm SIMD vectors store their type as `v128`, there is a mismatch between the more specific types Cranelift uses and Wasm SIMD. Because of this mismatch, Wasm SIMD translates to the default Cranelift type `I8X16`, causing issues when more specific type information is available (e.g. `I32x4`). To fix this, all incoming values to SIMD instructions are checked during translation (not runtime) and if necessary cast from `I8X16` to the appropriate type by functions like `optionally_bitcast_vector`, `pop1_with_bitcast` and `pop2_with_bitcast`. However, there are times when we must also cast to `I8X16` for outgoing values, as with `local.set` and `local.tee`.
There are other ways of resolving this (e.g., see adding a new vector type, https://github.com/bytecodealliance/cranelift/pull/1251) but we discussed staying with this casting approach in https://github.com/bytecodealliance/wasmtime/issues/1147.
This patch updates or removes all references to the Cranelift repository. It affects links in README documents, issues that were transferred to the Wasmtime repository, CI badges, and a small bunch of sundry items.
* Manually rename BasicBlock to BlockPredecessor
BasicBlock is a pair of (Ebb, Inst) that is used to represent the
basic block subcomponent of an Ebb that is a predecessor to an Ebb.
Eventually we will be able to remove this struct, but for now it
makes sense to give it a non-conflicting name so that we can start
to transition Ebb to represent a basic block.
I have not updated any comments that refer to BasicBlock, as
eventually we will remove BlockPredecessor and replace with Block,
which is a basic block, so the comments will become correct.
* Manually rename SSABuilder block types to avoid conflict
SSABuilder has its own Block and BlockData types. These along with
associated identifier will cause conflicts in a later commit, so
they are renamed to be more verbose here.
* Automatically rename 'Ebb' to 'Block' in *.rs
* Automatically rename 'EBB' to 'block' in *.rs
* Automatically rename 'ebb' to 'block' in *.rs
* Automatically rename 'extended basic block' to 'basic block' in *.rs
* Automatically rename 'an basic block' to 'a basic block' in *.rs
* Manually update comment for `Block`
`Block`'s wikipedia article required an update.
* Automatically rename 'an `Block`' to 'a `Block`' in *.rs
* Automatically rename 'extended_basic_block' to 'basic_block' in *.rs
* Automatically rename 'ebb' to 'block' in *.clif
* Manually rename clif constant that contains 'ebb' as substring to avoid conflict
* Automatically rename filecheck uses of 'EBB' to 'BB'
'regex: EBB' -> 'regex: BB'
'$EBB' -> '$BB'
* Automatically rename 'EBB' 'Ebb' to 'block' in *.clif
* Automatically rename 'an block' to 'a block' in *.clif
* Fix broken testcase when function name length increases
Test function names are limited to 16 characters. This causes
the new longer name to be truncated and fail a filecheck test. An
outdated comment was also fixed.
* All: Drop 'basic-blocks' feature
This makes it so that 'basic-blocks' cannot be disabled and we can
start assuming it everywhere.
* Tests: Replace non-bb filetests with bb version
* Tests: Adapt solver-fixedconflict filetests to use basic blocks
This commit aligns the representation of stackmaps to be the same
as Spidermonkey's by:
* Reversing the order of the bitmap from low addresses to high addresses
* Including incoming stack arguments
* Excluding outgoing stack arguments
Additionally, some accessor functions were added to allow Spidermonkey
to access the internals of the bitmap.
Spidermonkey will need to emit pre/post barriers for global.set/get to a
reference type. #1176 and #1299 plan to add a template concept that could
be used to implement this. Once that has been stabilized, we should be able
to remove this code in favor of templates easily.
This commit introduces environment functions to handle the translation of
reference type instructions, analogous to how bulk-memory was implemented.
Additionally, the bulk-memory instructions that operate on tables are extended
to support multiple table indices.
If/when Cranelift gains a `load_splat` instruction, the `load + splat` could be replaced with a single Cranelift `load_splat`. This change allows the `simd_load_splat.wast` spec test to pass.
* Use `is_wasm_parameter` in translating wasm calls
Added in #1329 it's now possible for multiple parameters to be non-wasm
parameters, so the previous `param_types` method is no longer suitable
for acquiring all wasm-related parameters, rather then `FuncEnvironment`
must be consulted. This removes usage of `param_types()` as a method
from the wasm translation and instead adds a custom method inline for
filtering the parameters based on `is_wasm_parameter`.
* Apply feedback
* Run rustfmt
* Don't require `mut`
* Run rustfmt
* Bitcast vectors immediately before a return
* Bitcast vectors immediately before a block end
* Use helper function for bitcasting arguments
* Add FuncTranslationState::peekn_mut; allows mutating of peeked values
* Bitcast values in place, avoiding an allocation
Also, retrieves the correct EBB header types for bitcasting on Operator::End.
* Bitcast values of a function with no explicit Wasm return instruction
* Add Signature::return_types method
This eliminates some duplicate code and avoids extra `use`s of `Vec`.
* Add Signature::param_types method; only collect normal parameters in both this and Signature::return_types
* Move normal_args to Signature::num_normal_params method
This matches the organization of the other Signature::num_*_params methods.
* Bitcast values of Operator::Call and Operator::CallIndirect
* Add DataFlowGraph::ebb_param_types
* Bitcast values of Operator::Br and Operator::BrIf
* Bitcast values of Operator::BrTable
